DIEHM
Filter
Showing all 9 results
| Brand | DIEHM |
|---|---|
| Origin | Germany |
| Model | 280°C Glass Reactor |
| Vessel Capacity | 50 L |
| Construction Material | ASTM E438 Type I, Class A Borosilicate Glass (3.3) |
| Maximum Operating Temperature | 280°C |
| Maximum Working Pressure | Up to 10 bar (g) |
| Vacuum Rating | ≤ 1 mbar (abs) |
| Jacketed Design | Yes (thermal fluid circulation) |
| Stirring System | PTFE-coated impeller with high-torque explosion-proof motor option |
| Sealing System | Fluoropolymer (FFKM/PTFE) gaskets with quick-release clamps |
| Vessel Geometry | Double-jacketed cylindrical vessel with calibrated volume markings |
| Port Configuration | 4–8 standardized ISO-KF or DIN 28178 flanged ports |
| Compliance | Designed per PED 2014/68/EU (Category II), ISO 15891, and GMP-relevant design principles for pharmaceutical R&D |
| Brand | DIEHM |
|---|---|
| Origin | Germany |
| Reactor Type | Jacketed Glass Reactor |
| Diameter Range | DN200–DN500 |
| Working Volume | 15 L to 150 L |
| Design Pressure | Low-Pressure (≤0.6 MPa gauge) |
| Vacuum Capability | ≤1 mbar (absolute) |
| Construction Material | Borosilicate Glass 3.3 (DIN ISO 3585) |
| Sealing | PTFE & EPDM Composite Gaskets |
| Agitator Options | PTFE-Coated or All-Glass Impeller |
| Frame | Modular Stainless Steel (AISI 304) Support Structure |
| Condenser Compatibility | Vertical or Horizontal, Interchangeable with Standard DIN/ISO Flange Interfaces |
| Feed Options | Elevated Dosing Vessel with Quick-Connect Fittings |
| Sampling Port | Integrated Sanitary Ball Valve (PTFE-sealed) |
| Compliance | Designed per AD 2000-Merkblatt W2 and DIN EN 13445-3 (Unfired Pressure Vessels – Part 3: Design) for Glass-Lined & Transparent Pressure Equipment |
| Brand | DIEHM |
|---|---|
| Origin | Germany |
| Construction Material | DIN 23530/ISO 3585 High-Borosilicate Glass (Schott Duran®) |
| Design Pressure | ≤0.1 MPa (gauge) |
| Vacuum Rating | ≤1 mbar (absolute) |
| Nominal Volume | 1 L |
| Jacketed Configuration | Yes |
| Standard Flange Sizes | DN60–DN120 |
| Thermal Shock Resistance | ΔT ≤100 °C across jacket wall |
| Sealing System | Rodaviss PTFE-coated glass-to-glass mechanical seal with axial load compensation |
| Brand | DIEHM |
|---|---|
| Origin | Germany |
| Model Range | 10 L to 150 L |
| Vessel Material | Borosilicate Glass 3.3 (DIN ISO 3585) |
| Maximum Working Volume | 150 L |
| Jacketed Design | Yes |
| Operating Pressure | ≤ 0.5 bar(g) |
| Vacuum Capability | ≤ 1 mbar (abs) |
| Explosion Protection | ATEX Category 2G, II 2G Ex db IIB T4 Gb |
| GMP Compliance | Designed per EU GMP Annex 1 & USP <1058> for equipment qualification |
| Stirring System | PTFE-coated or all-glass impeller, magnetically coupled or explosion-proof motor drive |
| Sealing | FDA-compliant PTFE/FFKM elastomer seals, zero-dead-leg geometry |
| Temperature Monitoring | Integrated Pt100 sensors for jacket, vapor, and reaction mass |
| Feed & Sampling | Multiple standardized NS29/NS45 ports, bottom valve with PTFE seat, side port for in-line sampling |
| Structural Support | Stainless Steel 316L frame with adjustable leveling feet |
| Thermal Integration | Dual-port jacket (in/out) compatible with LAUDA, JULABO, Huber, and other external circulators |
| Brand | DIEHM |
|---|---|
| Origin | Germany |
| Reactor Type | Filter Reactor / Glass Reactor |
| Construction | Borosilicate 3.3 Glass (DIN ISO 3585) |
| Design Options | Single-wall or Double-wall (Jacketed) |
| Diameter Range | DN100–DN450 |
| Height Range | 300–1000 mm |
| Working Volume | 50 L |
| Operating Pressure | Low-pressure (up to 0.5 bar gauge, compatible with vacuum down to ≤1 mbar absolute) |
| Filtration Plate Pore Size | 10–16 µm or 160–250 µm (sintered borosilicate glass) |
| Lid Port Count | 4–5 standard NS29/32 or NS45/50 ground-glass joints |
| Sealing | Chemically resistant FKM/EPDM/PTFE composite gaskets |
| Bottom Valve | PTFE-coated diaphragm valve, zero-dead-volume configuration |
| Stirrer Options | PTFE-coated or all-glass impeller (Rushton, anchor, or paddle type) |
| Support Frame | Modular stainless steel (AISI 304) frame with quick-release clamping system |
| Thermal Interface | Standard jacket inlet/outlet ports (G1/2" or G3/4") compatible with LAUDA, JULABO, Huber, and other external circulators |
| Customization | Available per ASTM E2500 & ICH Q5C design qualification guidelines |
| Brand | DIEHM |
|---|---|
| Origin | Germany |
| Model | 10 L, 20 L, 30 L, 50 L |
| Construction Material | Borosilicate Glass 3.3 (DURAN®-grade) |
| Jacket Type | Single or Double Jacket |
| Max Working Pressure | ≤ 0.5 bar (gauge) |
| Vacuum Rating | ≤ 1 mbar (absolute) |
| Stirring Drive | Manual or Motorized Lift Mechanism |
| Stirrer Shaft & Impeller | SS316Ti with 0.5 mm FPA anti-corrosion coating |
| Filter Plate | PTFE-coated stainless steel support with replaceable PP membrane filters (pore sizes: 0.2–10 µm, diameters: DN200–DN500) |
| Sealing System | Chemically resistant elastomeric gaskets (FKM/FFKM), quick-release clamps |
| Bottom Valve | PTFE-lined diaphragm valve, zero-dead-volume design |
| Temperature Monitoring | Integrated Pt100 sensor port |
| Jacket Inlet/Outlet | Standardized G1" BSP ports compatible with LAUDA, JULABO, Huber, and other external circulators |
| Structural Support | GMP-compliant stainless steel frame with adjustable leveling feet |
| Compliance | Designed per ISO 15891, ASTM E2500 (for lab-scale process equipment), and aligned with EU GMP Annex 15 principles for equipment qualification |
| Brand | DIEHM |
|---|---|
| Origin | Germany |
| Model Range | 15 L to 150 L |
| Working Volume | 50 L (Standard Configuration) |
| Construction Material | Borosilicate Glass 3.3 (DIN ISO 3585) |
| Operating Pressure | Low-Pressure System (≤ 0.5 bar gauge) |
| Vacuum Capability | ≤ 1 mbar (absolute) |
| Jacket Type | Double-Walled with Thermal Fluid Circulation |
| Stirring Drive | Mechanical or Electromagnetic Coupling |
| Sealing | PTFE-FKM Composite Gaskets |
| Bottom Valve | PTFE Plug Valve, Zero-Dead-Volume Design |
| Stirrer Options | Glass or PTFE-Coated SS316Ti Blades |
| Support Frame | Stainless Steel (AISI 304), Modular & Tool-Free Assembly |
| Condenser Options | Vertical or Horizontal, Exchangeable Heat Transfer Area |
| Feed Ports | Elevated Addition Funnel with Standardized GL45/GS24 Interfaces |
| Sampling Port | Integrated Ball Valve with Septum-Piercing Needle Interface |
| Compliance | Designed in Conformance with DIN 12575, ASTM E2915, and General Principles of EU GMP Annex 15 for Laboratory-Scale Process Development |
| Brand | DIEHM |
|---|---|
| Origin | Germany |
| Reactor Diameter | DN60–DN150 |
| Volume Range | 100 mL–10 L (graduated) |
| Construction Material | Borosilicate Glass 3.3 (DIN ISO 3585) |
| Operating Pressure | Low-pressure (≤0.5 bar gauge) |
| Lid Ports | 4–6 standard ground-glass joints with Rodaviss red locking nuts |
| Stirrer Types | Reverse, Anchor, Propeller, and custom configurations |
| Stirrer Shaft Materials | Glass, SS316L, or PTFE-coated |
| Mounting Options | Three-clamp, Hinged, or POM flexible coupling |
| Temperature Control Interface | Compatible with external heating/cooling circulators (e.g., LAUDA) |
| Support Frame | Benchtop or freestanding vertical stand |
| Compliance | Designed per DIN 12575, DIN EN ISO 1773, and VDI 2263 guidelines for laboratory glass apparatus |
| Brand | DIEHM |
|---|---|
| Origin | Germany |
| Reactor Type | Jacketed Quartz Glass Reactor |
| Diameter Range | DN100–DN450 |
| Capacity | 0.1 L to 150 L |
| Construction Material | Fused Silica (Heraeus Suprasil® Grade) |
| Maximum Operating Temperature | 280 °C |
| Pressure Rating | High-Pressure (Design per AD 2000 Merkblatt B3 / PED 2014/68/EU) |
| Vacuum Performance | ≤1 mbar (absolute) |
| Sealing System | Fluoropolymer (FFKM/PTFE) Gaskets with Sanitary Clamp Connections |
| Stirring Assembly | PTFE-Coated or All-PTFE Impeller, High-Torque Motor Options (Explosion-Proof ATEX Zone 1 Available) |
| Compliance | ISO 9001 Manufacturing, ASTM E438 Class I Type I Glass Specification Equivalent, Semiconductor Cleanroom-Compatible (ISO Class 5–7 Compatible Mounting & Surface Finish) |