Lamotte
Filter
Showing all 22 results
| Brand | Lamotte |
|---|---|
| Origin | USA |
| Model | 1500-U |
| Instrument Type | Single-Wavelength Absorbance Photometer |
| Measurement Range | 0–6.00 mg/L Urea |
| Resolution | 0.01 mg/L |
| Photometric Accuracy | ±0.001 Abs |
| Detection Method | Enzymatic Transaminase Colorimetric Assay (No Boiling Required) |
| Display | 3.5-inch Digital LCD |
| Response Time | <2 s |
| Detector | Silicon Photodiode |
| Light Source | LED |
| Sample Cell | Integrated Cuvette Holder for 25 mm Round Glass Cuvettes |
| Interface | RS232 |
| Certifications | EPA-Compliant Method, CE Marked |
| IP Rating | IP67 (Waterproof & Dustproof) |
| Power | 9 V Alkaline Battery or AC/DC Adapter |
| Brand | Lamotte |
|---|---|
| Origin | USA |
| Model | 1761 |
| Instrument Type | Portable |
| Measurement Principle | Electrochemical Galvanic Cell Probe |
| Measurement Range | 0–20.00 ppm (mg/L) |
| Accuracy | ±2% FS (DO), ±1.8°F (±1°C) (Temperature) |
| Resolution | 0.01 ppm (DO), 0.1°F/°C (Temperature) |
| Repeatability | ±4% |
| Detection Limit | ±2% FS |
| Altitude Compensation | 0–20,000 ft (in 1,000-ft increments) |
| Salinity Compensation | 0–50 ppt |
| Data Storage | 25 DO + temperature datasets |
| Power | Four 1.5V SR44W batteries |
| Dimensions | 1.4 × 6.9 × 1.6 in (36 × 176 × 41 mm) |
| Brand | Lamotte |
|---|---|
| Origin | USA |
| Model | 2020we |
| Instrument Type | Portable/Handheld Turbidimeter |
| Measurement Parameter | Turbidity |
| Compliance Standards | EPA Method 180.1 (tungsten lamp), ISO 7027 (860 nm LED) |
| Measurement Units | NTU, FNU, AU, ASBC, EBC |
| Range | 0–4000 NTU/FNU, 0–10,500 ASBC, 0–150 EBC |
| Resolution | 0.01 NTU/FNU (0–10.00), 0.1 NTU/FNU (10.00–10.99), 1 NTU/FNU (11.00–109.9), 1 NTU/FNU (110–4000) |
| Accuracy | ±0.05 NTU/FNU (0–2.5), ±2% (2.5–100), ±3% (>100) |
| Detection Limit | 0.05 NTU/FNU |
| Repeatability | ±0.02 NTU/FNU or ±1% |
| Light Source | Tungsten lamp (EPA mode), 860 nm LED (ISO mode) |
| Enclosure Rating | IP67 |
| Power | Rechargeable Li-ion battery |
| Interface | USB |
| Display | Backlit LCD |
| Language Support | 7 languages |
| Calibration | Automatic range selection, NIST-traceable standards compatible |
| Brand | Lamotte |
|---|---|
| Origin | USA |
| Model | COD3 PLUS |
| Instrument Type | Portable |
| Measurement Principle | UV-Vis Absorption Spectrophotometry (LED-based, dual-wavelength) |
| Wavelengths | 430 nm & 620 nm |
| Optical Range | 0–125% Transmittance (T) |
| Accuracy | ±2% Full Scale (FS) |
| Repeatability | ≤±5% |
| Detection Limit | 0.1 ppm |
| Measurement Time | 30 seconds |
| Batch Capacity | 1 sample per run |
| Light Source | High-stability LEDs with optical filters |
| Detector | Silicon photodiode |
| Display | 160 × 100 pixel backlit LCD (20 × 6 character graphical interface) |
| Sample Cells | 25 mm round cuvette, 10 mm square cell, 16 mm COD digestion vial |
| Power | Rechargeable Li-ion battery (500 tests per charge) or USB-powered operation |
| Data Storage | 500 timestamped measurement records with date/time stamp |
| Connectivity | USB interface for data export |
| Dimensions | 19.05 × 8.89 × 6.35 cm (7.5 × 3.5 × 2.5 in) |
| Weight | 453 g (16 oz) |
| Language Support | English, French, Spanish, Japanese, Italian, Portuguese, Chinese |
| Brand | Lamotte |
|---|---|
| Origin | USA |
| Model | Color Q |
| Detection Parameters | Free Chlorine (0–10 mg/L), Total Chlorine (Low Range: 0–10 mg/L |
| High Range | 0–750 mg/L) |
| Resolution | 0.01 mg/L |
| Test Capacity | 50 tests per reagent set (low range), 50 tests per high-range liquid reagent vial |
| Optical Design | Dual-wavelength photometric system |
| Reagent Format | DPD effervescent tablets (low range), stabilized liquid DPD reagent (high range) |
| Enclosure Rating | IP57 |
| Display | Backlit digital LCD |
| Brand | Lamotte |
|---|---|
| Origin | USA |
| Model | Color Q PRO-7 |
| Power | 2 × AA batteries (included) |
| Auto-off | 5 min |
| IP Rating | IP67 (waterproof) |
| Warranty | 6 months |
| Language Support | English, Spanish, French |
| Measurement Principle | Reflectance photometry with pre-programmed colorimetric methods |
| Compliance | Designed to meet ASTM D1293 (pH), D511 (calcium), D859 (cyanuric acid), and EPA-compliant chlorine/bromine test chemistries |
| Brand | Lamotte |
|---|---|
| Origin | USA |
| Model | DC-1500UDV |
| Type | UV-Vis Absorbance-Based Concentration Analyzer for Mold Release Agents |
| Compliance | Designed for industrial process control and QC labs in die-casting, composite manufacturing, and precision molding environments |
| Enclosure Rating | IP65-rated housing for splash resistance |
| Optical System | Fixed-wavelength UV-Vis photometer (254 nm and 546 nm dual-channel capability) |
| Detection Principle | Beer-Lambert law-based absorbance measurement calibrated for proprietary demoldant formulations |
| Calibration | Factory-calibrated with NIST-traceable standards |
| Sample Cell | Sealed, quartz-cuvette-style flow-through cell with O-ring sealing and chemical-resistant PTFE wetted surfaces |
| Power | 100–240 VAC, 50/60 Hz, internal switching power supply |
| Interface | Backlit LCD with tactile keypad |
| Data Storage | Internal memory for up to 500 test records with timestamp, operator ID, and calibration history |
| Brand | LaMotte |
|---|---|
| Origin | USA |
| Model | DC1200-CL |
| Instrument Type | Portable |
| Measurement Principle | DPD Colorimetric Method (EPA-Compliant) |
| Measuring Parameter | Free Chlorine |
| Range | 0.00–4.00 mg/L |
| Accuracy | ±0.01 mg/L |
| Repeatability | ±0.02 mg/L |
| Resolution | 0.01 mg/L |
| LOD | 0.025 mg/L |
| Optical Precision | ±0.001 Absorbance Units |
| Response Time | 2 s |
| Light Source | LED |
| Detector | Silicon Photodiode |
| Wavelength | Single-Wavelength (530 nm typical for DPD) |
| Cuvette | 25 mm square, flat-bottom, capped |
| Display | 3.5-digit LCD |
| Power | 9 V alkaline battery or optional AC adapter (220 V / 50 Hz) |
| Dimensions | 8.5 × 16.2 × 6.7 cm |
| Weight | 312 g |
| Operating Temperature | 0–50 °C |
| Storage Temperature | −40 to +60 °C |
| Relative Humidity | 0–90 % RH (non-condensing) |
| Certifications | CE |
| Brand | Lamotte |
|---|---|
| Origin | USA |
| Model | DC1500 |
| Detection Range | 0–4.00 ppm (mg/L) |
| Detection Limit | 0.03 ppm |
| Wavelength Accuracy | ±2% FS |
| Bandwidth | 10 nm |
| Light Source | LED |
| Detector | Silicon Photodiode with Integrated Interference Filter |
| Display | 160 × 100-pixel Backlit LCD (20 × 6-character + graphical) |
| Sample Cell | 25 mm Diameter Flat-Bottom Cuvette |
| Power | Rechargeable Li-ion Battery (3.7 V, 2.5" × 0.75") |
| Interface | Mini-USB |
| Ingress Protection | IP67 |
| Compliance | EPA Method 330.5, Standard Methods 4500-Cl, NPDWR & NPDES Requirements |
| Software Compatibility | Optional Data Management Software with Audit Trail Support |
| Auto-Power-Off | Configurable (5 / 10 / 50 min) |
| Language Options | 7 Languages Including English and Chinese |
| Brand | Lamotte |
|---|---|
| Origin | USA |
| Model | DC1500 |
| IP Rating | IP67 |
| Display | 160 × 100 backlit graphical LCD (20 × 6 character lines) |
| Wavelength Accuracy | ±2% FS |
| Bandwidth | 10 nm (typical) |
| Light Source | LED |
| Detector | Silicon photodiode with integrated interference filter |
| Measurement Modes | Pre-programmed methods, Absorbance, % Transmittance |
| Languages | English, Spanish, French, Portuguese, Italian |
| Sample Cell | 25 mm diameter flat-bottom cuvette |
| Interface | Mini-USB |
| Power | Rechargeable lithium-ion battery (3.7 V, 2.5 Ah) |
| Battery Life | ~380 tests with backlight enabled |
| Auto-off Options | Disabled, 5, 10, or 50 minutes |
| Compliance | CE Marked |
| Test Kits Supported | DPD-based free/total chlorine (e.g., catalog #3240-DC1500-CL0, range 0–4.00 mg/L, LOD 0.05 mg/L), chlorine dioxide (e.g., #3240-DC1500-CLO2-LI, liquid reagent format) |
| Brand | Lamotte |
|---|---|
| Origin | USA |
| Model | DC1500-DD |
| Detection Parameters | Free Chlorine & Total Chlorine (0.00–4.00 mg/L), Chlorine Dioxide (0.00–8.00 mg/L), Ozone (Low Range: 0.00–0.40 mg/L |
| High Range | 0.00–2.50 mg/L) |
| Display | 160 × 100 backlit LCD, 20 × 6 character graphic display |
| Wavelength Accuracy | ±2% FS |
| Bandwidth | 10 nm |
| Light Source | LED with integrated narrow-band interference filter |
| Detector | Silicon photodiode |
| Sample Cell | 25 mm diameter round-bottom cuvette |
| Power | Rechargeable lithium-ion battery (3.7 V, 2.5 × 75 mm, 1.7 oz), AC adapter, or USB bus power |
| Battery Life | Up to 380 tests (backlight on) or 1000 tests (backlight off) |
| Auto-off | Disabled, 5, 10, or 50 minutes |
| IP Rating | IP67 |
| Certifications | CE |
| Interface | Mini-USB |
| Languages | English, Spanish, French, Portuguese, Italian, Chinese, Japanese |
| Dimensions (Shipping) | 17 × 16 × 9 in |
| Weight (Shipping) | 8 lb |
| Brand | Lamotte |
|---|---|
| Origin | USA |
| Model | DC1500-UDV |
| Wavelength | 568 nm |
| Wavelength Accuracy | ±2% FS |
| Bandwidth | 10 nm |
| Photometric Range | –2 to +2 AU |
| Photometric Accuracy | ±0.005 AU (at 1.0 AU) |
| Photometric Precision | ±0.001 AU (at 1.0 AU) |
| Display | 160 × 100 backlit LCD with 20 × 6 alphanumeric/graphic capability |
| Sample Cell | 10 mm square cuvette compatible |
| Detector | Silicon photodiode with integrated interference filter |
| Power | Rechargeable 3.7 V Li-ion battery, USB or AC adapter |
| Ingress Protection | IP67 |
| Compliance | CE marked |
| Interface | Mini-USB |
| Auto-off | Configurable (5 / 10 / 30 min idle) |
| Language Support | English, Chinese, Spanish, French, German, Italian, Portuguese |
| Brand | Lamotte |
|---|---|
| Origin | USA |
| Model | SMART |
| Wavelength Range | 350–1000 nm |
| Wavelength Accuracy | ±2 nm |
| Wavelength Resolution | 1 nm |
| Bandwidth | 4 nm |
| Photometric Range | 0–125%T, −0.3–2.500 A |
| Photometric Accuracy | ±0.005 A |
| Photometric Noise | <0.001 A (at 0 A), <0.002 A (at 2 A) |
| Stray Light | ≤0.4%T at 360 nm |
| Optical System | Modified Ebert design with 1200 lines/mm grating |
| Light Source | 12 V / 10 W quartz-halogen lamp (≥1000 h lifetime) |
| Detector | Silicon photodiode |
| Sample Holders | 25 mm round cuvettes, 10 mm square cuvettes, COD vials (with adapters) |
| Display | 5.1-inch high-contrast LCD |
| Data Storage | 1000 measurements |
| Interface | USB |
| Power | 12 V DC adapter or optional rechargeable battery pack |
| Dimensions | 350 × 280 × 170 mm |
| Weight | 4.65 kg |
| Certifications | CE |
| Brand | Lamotte |
|---|---|
| Origin | USA |
| Model | SMART Spectro |
| Instrument Type | Laboratory Water Quality Analyzer |
| Wavelength Range | 350–1000 nm |
| Wavelength Accuracy | ±1 nm |
| Wavelength Resolution | 1 nm |
| Bandwidth (FWHM) | 5 nm |
| Photometric Range | 0–125%T, –0.1–2.5 A |
| Absorbance Accuracy | ±0.005 A |
| Optical Noise | <0.001 A at 0 A |
| Drift | ±0.002 A/hr @ 500 nm |
| Stray Light | <0.5% T |
| Grating Density | 1200 lines/mm |
| Optical Design | Modified Ebert monochromator |
| Light Source | Quartz-halogen lamp (≥1000 h lifetime) |
| Detector | Silicon photodiode |
| Cuvette Compatibility | 10 mm square, 25 mm round, COD vials, flow-through cell (optional) |
| Display & Interface | Menu-driven LCD with scroll navigation |
| Data Output | RS-232 serial port |
| Power Supply | 115/230 V AC or rechargeable battery |
| Built-in Diagnostics | Yes |
| Preprogrammed Methods | >80 |
| User-Defined Methods | Up to 25 |
| Measurement Modes | Absorbance (A), Transmittance (%T), Concentration (mg/L, ppm, etc.) |
| Brand | Lamotte |
|---|---|
| Model | SMART®Spectro |
| Origin | USA |
| Instrument Type | Portable/HANDHELD Water Quality Analyzer |
| Wavelength Range | 350–1000 nm |
| Wavelength Accuracy | ±2 nm |
| Wavelength Resolution | 1 nm |
| Spectral Bandwidth | 5 nm (max) |
| Photometric Range | 0–125% Transmittance, −0.1–2.5 Absorbance |
| Photometric Accuracy | ±0.005 A |
| Stray Light | <0.5% T |
| Light Source | Quartz Halogen Lamp |
| Cuvette Compatibility | 25 mm round tubes, 10 mm square UDV cells, COD vials, flow-through cells (optional) |
| Optical Design | Optimized Ebert monochromator with 1200 lines/mm grating |
| Measurement Modes | Concentration, %T, Absorbance |
| Power Supply | 110/220 V AC or rechargeable battery pack |
| Weight | 4.65 kg (10.3 lbs) |
| Dimensions | 35 × 28 × 17 cm |
| Pre-programmed Methods | >80 water quality parameters |
| User Calibrations | Up to 25 stored |
| Wavelength Selection | Automatic upon method selection |
| Menu Interface | Intuitive graphical LCD with customizable test ordering |
| Brand | Lamotte |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | SMART3 |
| Instrument Type | Portable/Handheld Water Quality Analyzer |
| Test Parameters | 85 Preloaded Calibration Curves |
| IP Rating | IP67 |
| Display | 160 × 100 Backlit Graphic LCD (20 × 6 Character) |
| Wavelengths | 428 nm, 525 nm, 568 nm, 635 nm |
| Wavelength Accuracy | ±2% FS |
| Bandwidth | ~10 nm |
| Photometric Range | –2 to +2 AU |
| Photometric Accuracy | ±0.001 AU at 1.0 AU |
| Photometric Repeatability | ±0.005 AU at 1.0 AU |
| Light Source | 4 High-Stability LEDs |
| Detector | 4 Silicon Photodiodes with Interference Filters |
| Sample Cells | 25 mm Round Cuvettes, 10 mm Square Cuvettes, 16 mm COD Tubes |
| Data Storage | 500 Internal Measurements with Timestamp |
| Power | Rechargeable Li-ion Battery (3.7 V, 750 mAh), USB or AC Adapter |
| Battery Life | Up to 380 tests (backlight on), 1000 tests (backlight off) |
| Auto-Off Options | Disabled, 5, 10, or 50 minutes |
| Dimensions | 8.84 × 19.05 × 6.35 cm (3.5 × 7.5 × 2.5 in) |
| Weight | 362 g (13 oz) |
| Certifications | CE Compliant |
| Languages | English, Spanish, French, Portuguese, Italian, Chinese, Japanese |
| Interface | USB Mini-B |
| Compatible Software | SMARTLink3™ Data Management Software |
| Brand | Lamotte |
|---|---|
| Origin | USA |
| Model | Smart3 |
| Wavelengths | 428 nm, 525 nm, 568 nm, 635 nm |
| Optical Path | 10 mm cuvette / 25 mm round tube / 16 mm COD vial |
| Display | 160 × 100 backlit LCD (20 × 6 character graphic) |
| Photometric Range | –2 to +2 AU |
| Absorbance Accuracy | ±0.001 AU at 1.0 AU |
| Wavelength Accuracy | ±2% FS |
| Bandwidth | 10 nm |
| Light Source | Four high-stability LEDs with integrated narrow-band interference filters |
| Detector | Silicon photodiode |
| Data Storage | 500 measurements |
| User-Defined Methods | Up to 25 custom calibration curves |
| Language Options | English, Spanish, French, Portuguese, Italian, Chinese, Japanese |
| IP Rating | IP67 |
| Power | Rechargeable Li-ion battery, USB bus power, or AC adapter |
| Auto-off | Configurable (5 / 10 / 50 min) |
| Dimensions | 8.84 × 19.05 × 6.35 cm |
| Weight | 362 g |
| Compliance | CE-marked |
| Brand | Lamotte |
|---|---|
| Origin | USA |
| Model | SMART3 |
| Instrument Type | Portable/Handheld Water Quality Analyzer |
| IP Rating | IP67 |
| Display | 160 × 100 backlit LCD (20 × 6 character graphic) |
| Wavelengths | 428 nm, 525 nm, 568 nm, 635 nm |
| Wavelength Accuracy | ±1 nm |
| Bandwidth | ~10 nm |
| Photometric Range | –2 to +2 AU |
| Photometric Accuracy | ±0.001 AU at 1.0 AU |
| Photometric Repeatability | ±0.005 AU at 1.0 AU |
| Light Source | LED |
| Detector | Four silicon photodiodes with interference filters |
| Sample Cells | 25 mm round flat-bottom tubes, 10 mm square cuvettes, 16 mm COD vials |
| Power | Rechargeable Li-ion battery (3.7 V, 750 mAh), USB or AC adapter |
| Battery Life | Up to 380 tests (backlight on), 1000 tests (backlight off) |
| Auto-Off Options | Disabled, 5, 10, or 50 min |
| Dimensions | 8.84 × 19.05 × 6.35 cm (3.5 × 7.5 × 2.5 in) |
| Weight | 362 g (13 oz) |
| Data Storage | 500 internal measurements with timestamp |
| Connectivity | USB Mini-B |
| Languages | English, Spanish, French, Portuguese, Italian, Chinese, Japanese |
| Certifications | CE |
| Brand | LaMotte |
|---|---|
| Model | SMART3 (Concentrator–1200 variant) |
| Origin | USA |
| Instrument Type | Portable/Handheld Colorimeter for Water Quality Analysis |
| Certifications | CE compliant |
| IP Rating | IP67 |
| Display | Backlit graphical LCD |
| Data Storage | 500 timestamped entries |
| Interface | USB |
| Power | Rechargeable Li-ion battery or AC/USB adapter |
| Preloaded Methods | >80 LaMotte reagent-compatible calibrations |
| User-Defined Methods | Up to 25 |
| Wavelength Selection | Automated multi-LED optical system with narrow-band interference filters |
| Output Units | Concentration (mg/L, ppm, etc.) and % Transmittance |
| Language Support | 7 selectable languages |
| Software Compatibility | SMARTLink3 PC software for data management and instrument control |
| Accessories | LaMotte reagent kits, cuvettes, calibration standards, carrying case |
| Brand | Lamotte |
|---|---|
| Model | Smart3 Reagent Set |
| Instrument Type | Portable/Handheld Water Quality Analyzer |
| Test Parameters | Free Chlorine, Total Chlorine, pH, Hardness, Alkalinity, Nitrate, Nitrite, Ammonia, COD, Iron, Copper, Manganese, Phosphate, Silica, Chloride, Bromide, Ozone, Dissolved Oxygen, and over 75 additional parameters |
| Detection Principle | Colorimetric Analysis via LED-Based Photometry (Multiple Wavelengths) |
| Calibration Options | Pre-programmed Lamotte-specific calibrations (n > 75), plus user-defined calibration curves (up to 25) |
| Data Storage | 500 measurement records with timestamp |
| Connectivity | USB interface for real-time data transfer and firmware updates |
| Display | Backlit LCD with 7-language support (English, Spanish, French, German, Portuguese, Chinese, Arabic) |
| Compliance | Designed to support ASTM D1293 (pH), ASTM D1253 (Residual Chlorine), ISO 7888 (Electrical Conductivity), USP <643> (TOC—when paired with optional modules), and GLP-compliant data logging (audit trail enabled via software) |
| Brand | Lamotte |
|---|---|
| Origin | USA |
| Model | Spin Touch |
| Instrument Type | Portable/HANDHELD Water Quality Analyzer |
| Detection Parameters | Free Chlorine, Total Chlorine, Chloramines, Copper, pH, Total Hardness, Total Alkalinity, Iron, Ferric Iron (Fe³⁺), Ferrous Iron (Fe²⁺), Cyanuric Acid |
| Optical System | 6-Wavelength Photometer |
| Sample Volume | ≤3 mL |
| Analysis Time | ≤60 s (per disc) |
| Data Storage | Internal Memory with Timestamp (Date & Time) |
| Connectivity | Bluetooth & USB |
| Power | Rechargeable Internal Battery |
| Enclosure | IP67-Rated Waterproof Housing |
| Compliance | Designed for ASTM D1293 (pH), ASTM D1888 (Chlorine), EPA 334.0 / 330.5 (Chlorine), ISO 7888 (pH), ISO 8299 (Chloramines), USP <645> (Conductivity–related water quality context), GLP-compliant audit trail support via software export |
| Reagent Format | Pre-loaded, foil-sealed, single-use rotating assay discs (DW11, 501, 101 series) |
| Disc Shelf Life | 24 months unopened at 2–30 °C |
| Brand | Lamotte |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported |
| Model | Total Hardness Titration Kit |
| Price | Upon Request |
| Method | EDTA Complexometric Titration |
| Range | 0–500 mg/L as CaCO₃ (extendable) |
| Detection Limit | 4 mg/L as CaCO₃ |
| Test Capacity | 25 determinations per kit |
| Standard Configuration | EDTA titrant (1 set), calibrated 25 mL glass graduated comparator tube (1 pc), direct-read titrator (1 pc), 0.5 mL volumetric transfer pipette (1 pc) |