Techne
Filter
Showing all 5 results
| Brand | Techne |
|---|---|
| Origin | USA |
| Model | FB-08 / FB-08C |
| Temperature Range | 50–700 °C |
| Short-term Accuracy | ±0.2 °C at 50 °C, ±0.3 °C at 600 °C |
| Long-term Stability | ±0.5 °C across full range |
| Control | 3-term PID (FB-08) |
| Heating Medium | 15.8 kg Al₂O₃ powder |
| Air Supply | 127 L/min at 0.42 MPa |
| Heating Power | 3000 W |
| Chamber Dimensions (Ø × D) | 16.5 × 38.5 cm |
| External Dimensions (L × W × H) | 77 × 52 × 60 cm (FB-08), 87 × 51 × 60 cm (FB-08C) |
| Weight | 76 kg (FB-08), 84 kg (FB-08C) |
| Power Supply | 240 V, 50/60 Hz |
| Dead Bed Stability | ±0.010 °C for 3–6 min after shutdown |
| Brand | Techne |
|---|---|
| Origin | United Kingdom |
| Model | GT-5 (1 rpm), GT-6 (10 rpm) |
| Timer Resolution | 1 min (GT-5) or 0.1 min (GT-6) |
| Maximum Timing Duration | 9999 min (GT-5) / 999.9 min (GT-6) |
| Drive Speed | 1 rpm (GT-5), 10 rpm (GT-6) |
| Detection Method | Mechanical gel-point endpoint via plunger immobilization |
| Compliance | Fully compliant with BS EN ISO 2535, ASTM D2471, and BS 2782-5 for gel time determination |
| Warranty | 3-year limited warranty including factory calibration certificate |
| Sample Holder Compatibility | Standard 22 mm, 19 mm, and 16 mm stainless-steel plungers |
| Mounting | Compatible with standard distillation flask stands (e.g., Claisen or Graham condenser supports) |
| Brand | Techne |
|---|---|
| Origin | United Kingdom |
| Model | GT-5 / GT-6 |
| Category | Rheometer/Viscometer Peripheral Service Offering |
| Compliance | ASTM D4287, ISO 1133-2 (gelation timing reference), USP <724> (for hydrogel formation kinetics) |
| Service Scope | Calibration, Repair, Legacy Unit Support |
| Brand | Techne |
|---|---|
| Origin | United Kingdom |
| Model | MSC |
| Speed Range | 0–80 rpm |
| Speed Accuracy | < ±3 rpm |
| Soft-Start/Stop Ramp Time | 20 sec acceleration/deceleration |
| Intermittent Mode | On-time 6 sec–5 min, Off-time 2 min–2 hr |
| Operating Environment | ≤40°C, ≤95% RH (non-condensing) |
| Power Supply | Dual-voltage 110/230 V, 50/60 Hz |
| Power Consumption | 2 W |
| Fuse Rating | 100 mA |
| Compatible Vessels | Pyrex® borosilicate glass flasks (125 mL–5 L), with 2 or 5 side necks |
| Stirrer Platforms | MCS-101L (1×3–5 L), MCS-102L (2×1 L), MCS-104S (4×500 mL), MCS-104L (4×1 L), MCS-104XL (4×5 L) |
| Material | Stainless steel base, siliconized stir rods, borosilicate glass vessels |
| Brand | Techne |
|---|---|
| Origin | United Kingdom |
| Model | RB-5A |
| Temperature Range | −20 °C to 100 °C |
| Minimum Achievable Temperature (at 20 °C ambient) | −20 °C |
| Cooling Power at 20 °C | 145 W |
| Cooling Power at 0 °C | 145 W |
| Cooling Power at −10 °C | 110 W |
| External Dimensions (L×W×H) | 430×250×566 mm |
| Internal Dimensions (L×W×H) | 192×151×200 mm |
| Max Liquid Level to Top | 65 mm |
| Working Height Range | 180/135 mm |
| Max/Min Working Volume | 7.0/5.5 L |
| Flow Rate (Pressure) | 20 L/min |
| Flow Rate (Suction) | 15 L/min |
| Shipping Weight | 31 kg |
| Controller Included | Yes |
| Fluid Compatibility | Water/glycol/alcohol mixtures (e.g., 40/40/20 v/v/v for −35 °C operation) |