Environmental Monitoring Instruments
Filter
Showing 5791–5820 of 9112 results
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | MX-6 |
| Pricing | Available Upon Request |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | MX4 iQuad |
| Pricing | Available Upon Request |
| Brand | Myratek |
|---|---|
| Origin | USA |
| Model | Portable SS Sentry M-2 |
| Instrument Type | Portable |
| Measurement Range | 0–30,000 mg/L (or 0–1,500 mg/L selectable) |
| Accuracy | ±3% of reading or ±20 mg/L, whichever is greater |
| Sensitivity | 1 mg/L (≤1,000 mg/L), 10 mg/L (1,001–9,999 mg/L), 100 mg/L (≥10,000 mg/L) |
| Repeatability | ±0.5% |
| Drift | <1% per year |
| Operating Temperature | 0–65°C |
| Probe Diagnostic | Automatic self-diagnostic |
| Output | RS-232 serial interface |
| Data Storage | 50 records with timestamp |
| Display | UV-resistant graphical LCD with adjustable backlight contrast |
| Sensor Cable Length | 6.0 m |
| Ambient Operating Conditions | –20 to +70°C, 0–100% RH |
| Enclosure Rating | IP66 |
| Housing Materials | Epoxy, polyurethane, PVC |
| Maximum Pressure Rating | 100 PSI |
| Shipping Weight | ~1.8 kg |
| Brand | MyronL |
|---|---|
| Origin | USA |
| Model | Ultrameter III 9P |
| Instrument Type | Portable / Handheld Water Quality Analyzer |
| Conductivity Range | 0–9999 µS/cm & 10–200 mS/cm |
| TDS Accuracy | ±1% |
| Resistivity Range | 10 kΩ·cm – 30 MΩ·cm |
| pH Range | 0–14, ±0.01 |
| ORP Range | ±999 mV, ±1 mV |
| Free Chlorine | 0.00–10.00 ppm (pH 5–9), ±2.5% |
| Hardness | 0–1710 ppm (CaCO₃) or 1–100 grains/gal |
| Alkalinity | 10–800 ppm (as CaCO₃) |
| LSI Range | −10 to +10 |
| Temperature | 0–71 °C (32–160 °F), ±0.1 °C |
| Data Storage | Up to 100 test records with timestamp |
| Wireless Connectivity | via bluDock™ accessory |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | N962A |
| Instrument Type | Hot-Wire Anemometer |
| Resolution | 0.01 m/s |
| Accuracy | ≤ ±5% |
| Operating Temperature | 0–40 °C |
| Operating Relative Humidity | 0–85% RH |
| Measurement Range | 0–30 m/s (auto-ranging across 0–10 / 0–20 / 0–30 m/s) |
| Power Supply | Rechargeable Ni-MH Battery (memory-free) |
| Display | Large-format LED |
| Sensor Element | Thin-film Platinum RTD (ceramic substrate) |
| Compliance | Designed for GLP-aligned field use in occupational & environmental monitoring |
| Brand | Oxility |
|---|---|
| Origin | Netherlands |
| Model | Nano Tracer XP |
| Instrument Type | Aerosol Detector |
| Measurement Range | 10–300 nm |
| Output Parameters | Total Particle Number Concentration, Mean Particle Diameter, Lung Deposited Surface Area (LDSA) |
| Detection Principle | Diffusion Charging + Electrometer-based Quantification (Aerasense Technology) |
| Noise Level | <35 dB(A) |
| Pump Lifetime | 40,000 hours |
| Compliance | Validated per IGF (Institut für Gefahrstoffe) independent testing protocol |
| Software | NanoReporter (real-time multi-unit dashboard, audit-ready data export, report generation) |
| Brand | NanoTest |
|---|---|
| Origin | USA |
| Model | P300 |
| Instrument Type | Portable GC System |
| Detection Principle | Microfluidic Gas Chromatography |
| Detection Limit | Sub-ppb (typical for target VOCs) |
| Integrated Control | Onboard Industrial Computer |
| Regulatory Alignment | Designed for field-deployable compliance with EPA Method TO-17, ASTM D5504, and ISO 16017-1 workflows |
| Compliance Ready | Audit-trail capable data logging per GLP/GMP-aligned practices |
| Brand | Nanova |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Imported |
| Model | P100 |
| Price Range | USD 14,000 – 42,000 (FOB) |
| Detection Principle | Gas Chromatography (GC) |
| Instrument Type | Portable |
| Typical Configuration | Modular GC with Integrated Micro-Preconcentrator and FID Detector |
| Brand | Narda |
|---|---|
| Origin | Germany |
| Model | AMB 8057 |
| Frequency Range (E-field) | 100 kHz – 3 GHz |
| Frequency Range (H-field) | 10 Hz – 5 kHz |
| Data Storage Capacity | Up to 338 days @ 15-min intervals (3-band mode) |
| Sampling Interval | 3 seconds (simultaneous multi-band acquisition) |
| Communication | Dual-mode GSM/GPRS + RS-232C |
| Power Supply | Integrated Li-ion battery (3.6 V, 13 Ah) with solar panel (4 V, 2.5 Ah lead-acid backup) |
| Operating Temperature | −10 °C to +50 °C |
| Ingress Protection | IP54 |
| Data Capture Rate | ≥99% |
| Alarm Triggers | Field strength exceedance, memory full, temperature out-of-range, low battery, probe disconnection, enclosure open |
| SMS Alert Support | Up to two mobile numbers |
| Software | AMB-8057-SW-02 (data download, threshold-based alerts, RMS/AVG/MAX computation, linear/logarithmic plotting, calibration traceability) |
| Brand | Narda |
|---|---|
| Origin | Germany |
| Model | EFA-300 |
| Frequency Range (Broadband) | 5 Hz – 32 kHz |
| Measurement Modes | RMS, Peak, Vector Peak, Time-Domain STD Weighting |
| Filter Options | Bandpass (15–2000 Hz, 0.1 Hz resolution), Bandstop (15–2000 Hz) |
| Probe Compatibility | Isotropic Magnetic Field Probes (A-type: 100 cm² |
| D-type | 30 mm diameter), Isotropic Electric Field Probe (up to 200 kV/m) |
| Typical Broadband Uncertainty | ±3% @ ≥40 nT (5–2 kHz), ±3% @ ≥5 V/m (5–2 kHz) |
| Display | 128×64 LED matrix with backlight |
| Interface | Optical RS-232 (fiber optic cable included) |
| Operating Temperature | 0–50 °C |
| Battery | Rechargeable NiMH (5×C-cell) |
| Dimensions | 110 × 200 × 60 mm |
| Weight | ~1000 g |
| Calibration Interval | 24 months |
| Optional Modules | FFT Narrowband Spectrum Analysis & Harmonic Measurement (9 harmonics), Remote PC Control Software EFT-TS |
| Brand | Narda |
|---|---|
| Origin | Germany |
| Model | PMM 8053B |
| Frequency Range | 5 Hz – 40 GHz |
| Low-Frequency Probe | EHP-50C (5 Hz – 100 kHz, E/H-field isotropic, 0.01 V/m – 100 kV/m / 1 nT – 10 mT) |
| RF Probes | EP-105 (100 kHz – 1 GHz), EP-300/EP-330/EP-301 (100 kHz – 3 GHz), EP-183 (1 MHz – 18 GHz), EP-408 (1 MHz – 40 GHz), HP-102 (30 MHz – 1 GHz), HP-032 (100 kHz – 30 MHz) |
| Isotropic Measurement Capability | Yes |
| Spectral Analysis | Real-time FFT with 7 selectable bandwidths (LF), XYZ vector resolution |
| Data Logging | Continuous 24-h recording, internal memory + PC export via RS-232/fiber optic |
| Compliance | IEC 61786-1:2013, IEC 62232:2017, EN 50492:2008, IEEE C95.3-2019 |
| Calibration | Internal reference source, traceable to PTB/NIST |
| Remote Operation | Up to 40 m via fiber optic |
| Multi-probe Expansion | Up to 16 probes (optional) |
| Brand | Narda |
|---|---|
| Origin | Germany |
| Model | PMM8056 |
| Electric Field Frequency Range | 3 MHz–40 GHz |
| Electric Field Measurement Range | 0.6 V/m–30 V/m |
| Electric Field Frequency Response | ±3 dB |
| Magnetic Field Frequency Range | 30 MHz–300 MHz |
| Magnetic Field Measurement Range | 7.3 mA/m–3 A/m |
| Magnetic Field Frequency Response | ±3 dB |
| Display | Backlit LCD showing real-time field strength, user-defined thresholds, date/time |
| Audio-visual Alarm | Threshold-triggered audible tone and visual indicator |
| Data Logging | 1 sample/sec (instant), max value every 60 sec, 6-min moving average |
| Interface | Infrared (IR) PC interface |
| Battery Life | 40 h (9 V alkaline, 1200 mAh) |
| Dimensions | 62 × 30 × 190 mm |
| Weight | 200 g |
| Probe Type | Integrated isotropic E-field and H-field sensors |
| Compliance | Designed for compliance with GB 8702–2014 (China EMF exposure limits), ICNIRP 2020 guidelines, and IEEE C95.1–2019 |
| Brand | Narda |
|---|---|
| Origin | Germany |
| Model | SRM 3000 |
| Frequency Range | 100 kHz – 3 GHz |
| Measurement Modes | Safety Assessment, Spectrum Analysis (with user-defined RBW integration), UMTS P-CPICH Option, Time-Domain Monitoring |
| RBW | 1 kHz – 5 MHz (configurable) |
| Dynamic Range | −121 dBm to +23 dBm |
| E-field Probe | Isotropic, 5 MHz – 3 GHz, Max. 200 V/m (Destruction Limit: 1000 V/m) |
| Operating Temperature | −10 °C to +50 °C |
| Humidity | Up to 95 % RH (IP54) |
| Battery Life | ~3.5 h |
| Dimensions | 255 × 195 × 60 mm |
| Weight | 1.9 kg (instrument), 450 g (probe) |
| Calibration Interval | 24 months |
| Brand | Narda |
|---|---|
| Origin | Germany |
| Model | SRM-3006 |
| Frequency Range | 9 kHz – 6 GHz |
| Display Range | DANL to +20 dBm |
| Measurement Range | −30 dBm to +20 dBm (1 dB steps) |
| RF Input Attenuation | 0–50 dB (1 dB steps) |
| Level Uncertainty | ≤1.2 dB (15–30 °C) |
| Antenna Auto-Detection | Yes (type & calibration date) |
| Compliance Standards | HJ 1151–2020, IEC 62232, EN 50492, ICNIRP, GB 8702 |
| Brand | NC Technologies |
|---|---|
| Origin | Italy |
| Model | ECS 8070-IRMS-iRIS |
| Sample Throughput | 10–60 min (CO₂ prep), 10 min (δ¹³C via ID Micro), 30–60 min (¹⁴C via PEM iRIS) |
| CO₂ Capture Capacity | 10–100 mg per sample |
| δ¹³C Precision | ±0.083–±0.152 ‰ (1σ, n=6) |
| ¹⁴C Accuracy | <1% pMC |
| Detection Medium | Pure CO₂ gas (≥10 mg C) |
| Compliance | Designed for ISO/IEC 17025-aligned workflows, compatible with GLP/GMP data integrity requirements |
| Brand | NC Technologies |
|---|---|
| Origin | Italy |
| Model | Respirometer 3024B |
| Measurement Principle | Polarographic Oxygen Consumption |
| Oxygen Range | 0–25 % |
| Temperature Range | 0–100 °C |
| Airflow Rate | 10–500 L/h |
| Oxygen Resolution | 0.1 % |
| Temperature Resolution | 0.1 °C |
| Flow Resolution | 0.1 L/h |
| Oxygen Accuracy | ±0.3 % of reading |
| Temperature Accuracy | ±0.5 °C |
| Flow Accuracy | ±1 % of full scale |
| Dimensions | 900 × 750 × 1000 mm |
| Weight | 27 kg |
| Power Supply | 230 V~50 Hz, Max. 2 A |
| Connectivity | Ethernet (RJ45, Cat.5) |
| Gas Supply | High-purity compressed air (3 bar) |
| Software | Respi On Line (embedded), Respi Off Line (data analysis & export to TXT/XLS) |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | NDDA |
| Pricing | Available Upon Request |
| Brand | NeuronBC |
|---|---|
| Model | Carbon TA5.0 |
| Origin | Beijing, China |
| Instrument Type | Online TOC Analyzer |
| Detection Principle | Direct Conductivity Method |
| Oxidation Method | UV Photolysis (Static UV Oxidation) |
| Measurement Range | 1–1000 ppb (as C) |
| Accuracy | ±5% of reading |
| Detection Limit | 1 ppb (as C) |
| Resolution | 0.1 ppb (display), 1 ppb (reporting) |
| Repeatability | ±5% RSD |
| Conductivity Detection Range | 0.055–6.000 µS/cm |
| Sample Temperature Range | 0–100 °C |
| Ambient Operating Temperature | 5–65 °C |
| Relative Humidity | ≤85% RH (non-condensing) |
| Power Supply | 220 V ±10%, 50 Hz ±10% |
| Response Time | ≤5 min (t₉₀) |
| Drift | ±5% FS/24 h |
| Detector Unit Rated Power | 50 W per unit |
| Communication Interface | RS-485 (up to 48 nodes) |
| Display | 10-inch capacitive touchscreen HMI |
| Data Terminal | TOC-D500 central controller supporting up to 8 distributed TA5.0 sensor units |
| Sample Tubing | PTFE, 1 mm ID, fitted with Swagelok® 50-series quick-connect fittings |
| Data Storage | Internal SD card (≥8 GB), 10-year historical archive (1-min intervals) |
| Output | Real-time analog 4–20 mA, Modbus RTU/TCP, optional thermal printer integration |
| Brand | NeuronBC |
|---|---|
| Model | JWG-7A |
| Measurement Principle | Laser Light Obscuration (Single-Particle Counting) |
| Detection Range | 1–500 µm |
| Channel Configurations | ≥5 µm, ≥10 µm, ≥25 µm, 15–25 µm, 25–50 µm, 51–100 µm, >100 µm (user-definable up to 16 channels) |
| Minimum Sample Volume | ≥0.1 mL |
| Particle Count Capacity | 0–9,999,999 particles per sample |
| Concentration Range | 0–10,000 particles/mL |
| RSD | ≤2% (for NIST-traceable standard latex particles ≥1000 particles/mL) |
| Accuracy | ±5% of reference value |
| Channel Resolution | ≥95% (≥10 µm channel) |
| Sampling Time | <10 s for 5 mL |
| Stirring Speed | 0–2000 rpm (adjustable glass propeller stirrer) |
| Operating Temperature | 0–40 °C |
| Power Supply | AC 220 V ±10%, 50 Hz, ≤90 W |
| Dimensions | 390 × 350 × 470 mm |
| Compliance | GB 8368–2005, GB 8368–2018, GB 8368–1998 (Medical Devices & Pharmaceutical Packaging Materials), ISO 21501-4, USP <788> and <789> (with method validation), FDA 21 CFR Part 11-ready (JWG-7DS variant) |
| Brand | NeuronBC |
|---|---|
| Origin | Beijing, China |
| Model | TA-1.0 |
| Instrument Type | Benchtop Laboratory TOC Analyzer |
| Detection Principle | Direct Conductivity Detection |
| Oxidation Method | UV Photocatalytic Oxidation (254 nm) |
| Measurement Range | 0.001–1.0 mg/L (1–1000 ppb) |
| Accuracy | ±3% of reading |
| Resolution | 0.001 mg/L |
| Detection Limit | 0.001 mg/L |
| Repeatability | ±3% RSD |
| Power Supply | 100–240 VAC, 50 Hz, 120 W |
| Dimensions (L×W×H) | 400 × 240 × 270 mm |
| Weight | 8.5 kg |
| Sample Temperature Range | 1–99 °C |
| Audit Trail | 16-event log with timestamped entries |
| User Access Control | 4-tier role-based authentication |
| Data Export | USB flash drive support |
| Data Storage Capacity | >5000 test records |
| Display | Color capacitive touchscreen |
| Compliance | Meets Chinese Pharmacopoeia 2020 Edition (ChP) General Chapter <0682>, FDA 21 CFR Part 11 (electronic records & signatures), and GLP/GMP-aligned validation protocols (IQ/OQ/PQ support available) |
| Brand | NeuronBC |
|---|---|
| Origin | Beijing, China |
| Model | TA-1.0 |
| Instrument Type | Laboratory TOC Analyzer |
| Detection Principle | Direct Conductivity Method |
| Oxidation Method | UV Photocatalytic Oxidation (with TiO₂-coated quartz tube) |
| Measurement Range | 0.001–1.0 mg/L (1–1000 ppb) |
| Accuracy | ±3% |
| Resolution | 0.001 mg/L |
| Detection Limit | 0.001 mg/L |
| Repeatability | ±3% |
| Power Supply | 100–240 VAC, 50 Hz, 120 W |
| Sample Temperature Range | 1–99 °C |
| Data Storage | >5000 records |
| Audit Trail | 16-event log with timestamped traceability |
| User Access Control | 4-tier role-based authentication compliant with FDA 21 CFR Part 11 |
| Display | Color touchscreen interface |
| Dimensions (L×W×H) | 400 × 240 × 270 mm |
| Weight | 8.5 kg |
| Brand | NeuronBC |
|---|---|
| Origin | Beijing, China |
| Model | TA-1.0 |
| Instrument Type | Laboratory TOC Analyzer |
| Detection Principle | Direct Conductivity Method |
| Oxidation Method | UV Photocatalytic Oxidation |
| Measurement Range | 0.001–1.0 mg/L (1–1000 ppb) |
| Accuracy | ±3% |
| Resolution | 0.001 mg/L |
| Detection Limit | 0.001 mg/L |
| Repeatability | ±3% |
| Power Supply | 100–240 VAC, 50 Hz, 120 W |
| Sample Temperature Range | 1–99 °C |
| Data Logging | 5000+ records |
| Audit Trail | 16-event log with timestamped entries |
| User Access Control | 4-tier password authentication compliant with FDA 21 CFR Part 11 |
| Display | Color touchscreen |
| Dimensions (L×W×H) | 400 × 240 × 270 mm |
| Weight | 8.5 kg |
| Brand | NeuronBC |
|---|---|
| Origin | Beijing, China |
| Model | TA-1.0 OL Offline |
| Instrument Type | Laboratory TOC Analyzer |
| Detection Principle | Direct Conductivity |
| Oxidation Method | UV Photocatalytic Oxidation |
| Measurement Range | 1–1000 ppb C |
| Accuracy | ±3% of reading |
| Detection Limit | 1 ppb C |
| Resolution | 1 ppb C (full range) |
| Repeatability | ±3% RSD |
| Compliance | Designed to meet Chinese Pharmacopoeia 2020 Edition (ChP), USP <643>, and EP 2.2.44 requirements for offline water quality testing |
| Brand | NeuronBC |
|---|---|
| Origin | Beijing, China |
| Model | TA-1.0 Offline |
| Instrument Type | Laboratory TOC Analyzer |
| Detection Principle | Direct Conductivity Detection |
| Oxidation Method | UV Photocatalytic Oxidation (TiO₂-coated Quartz Tube) |
| Measurement Range | 1–1000 ppb (0.001–1.0 mg/L) |
| Accuracy | ±3% of reading |
| Resolution | 1 ppb (0.001 mg/L) |
| Detection Limit | 1 ppb (0.001 mg/L) |
| Repeatability | ≤3% RSD |
| Power Supply | 100–240 VAC, 50 Hz, 120 W |
| Sample Temp. Range | 1–99 °C |
| Data Storage | >5000 records |
| Audit Trail | 16-event log with timestamped traceability |
| User Access Control | 4-tier role-based authentication compliant with FDA 21 CFR Part 11 |
| Display | Color TFT touchscreen |
| Dimensions (L×W×H) | 400 × 240 × 270 mm |
| Weight | 8.5 kg |
| Brand | NeuronBC |
|---|---|
| Origin | Beijing, China |
| Model | TA-1.0/TOC |
| Instrument Type | Portable TOC Analyzer |
| Detection Principle | Direct Conductivity Method |
| Oxidation Method | UV Photolysis (185/254 nm) |
| Measurement Range | 1–1000 ppb (as C) |
| Accuracy | ±3% of reading |
| Detection Limit | 1 ppb (as C) |
| Resolution | 1 ppb (as C) |
| Repeatability | ±3% RSD |
| Sample Temperature Range | 1–95 °C |
| Analysis Time | ≤5 min per sample |
| Power Supply | 220 V AC |
| Display | Color TFT Touchscreen |
| Data Storage | Internal memory for ≥10,000 test records |
| Compliance | Meets Chinese Pharmacopoeia 2020 Edition (ChP) Chapter 0682 requirements for purified water and WFI |
| Brand | NeuronBC |
|---|---|
| Origin | Beijing, China |
| Model | TA-1.0 |
| Instrument Type | Laboratory TOC Analyzer |
| Detection Principle | Direct Conductivity Detection |
| Oxidation Method | UV Photolysis (185/254 nm) |
| Measurement Range | 1–1000 µg/L (ppb) |
| Accuracy | ±3% of reading |
| Detection Limit | 1 µg/L |
| Resolution | 1 µg/L |
| Repeatability | ≤3% RSD |
| Sample Temperature Range | 1–95 °C |
| Analysis Time | <5 minutes per sample |
| Display | Color TFT Touchscreen |
| Power Supply | 220 V AC |
| Brand | NeuronBC |
|---|---|
| Origin | Beijing, China |
| Model | TA-1.1 |
| Instrument Type | Benchtop Offline TOC Analyzer |
| Detection Principle | Direct Conductivity Measurement |
| Oxidation Method | UV Photocatalytic Oxidation (185/254 nm) |
| Measurement Range | 1–1000 ppb (0.001–1.0 mg/L) |
| Accuracy | ±3% of reading |
| Detection Limit | 1 ppb (0.001 mg/L) |
| Repeatability | ≤3% RSD |
| Resolution | 0.001 mg/L |
| Analysis Time | <5 minutes per sample |
| Sample Temperature Range | 1–99 °C |
| Power Supply | 100–240 VAC, 50 Hz, 120 W |
| Dimensions (L×W×H) | 400 × 240 × 270 mm |
| Weight | 8.5 kg |
| Data Logging | ≥5000 records with time-stamped audit trail (16 event categories) |
| User Access Control | 4-tier password-protected authentication |
| Compliance | Designed to support FDA 21 CFR Part 11, USP <643>, EP 2.2.44, and ChP 2020 Edition General Chapter 0682 requirements |
| Brand | NeuronBC |
|---|---|
| Origin | Beijing, China |
| Model | TOC100 |
| Instrument Type | Online TOC Analyzer |
| Detection Principle | Non-Dispersive Infrared (NDIR) Absorption |
| Oxidation Method | UV/Persulfate Oxidation |
| Measurement Range | 0–10,000 mg/L |
| Accuracy | ±3% of reading |
| Resolution | 0.001 mg/L |
| Detection Limit | 0.001 mg/L |
| Repeatability | ±3% RSD |
| Compliance | Designed for ISO 8469, ASTM D5905, USP <643>, and EPA Method 415.3 environments |
| Brand | NeuronBC |
|---|---|
| Origin | Beijing, China |
| Model | TA-2.0 |
| Instrument Type | Online/Offline TOC Analyzer |
| Detection Principle | Direct Conductivity Measurement |
| Oxidation Method | UV Photolysis (185/254 nm) |
| Measurement Range | 0.001–1.0 mg/L (1–1000 ppb) |
| Accuracy | ±3% of reading |
| Resolution | 0.001 mg/L |
| Detection Limit | 0.001 mg/L |
| Repeatability | Continuous analysis mode |
| Sample Temperature Range | 1–95 °C |
| Ambient Operating Temperature | 5–65 °C |
| Power Supply | 100–240 VAC, 50 Hz, 120 W |
| Conductivity Detection Range | 0.055–8.000 µS/cm |
| Response Time | ≤5 minutes |
| Data Storage Capacity | >5000 records |
| Audit Trail | 16-event log with timestamped entries |
| User Access Control | 4-tier role-based authentication (username/password), compliant with FDA 21 CFR Part 11 |
| Display | Color touchscreen interface |
| Connectivity | Ethernet port, RS-232 serial port, digital power output port |
| Dimensions (L×W×H) | 400 × 240 × 270 mm |
| Weight | 8.5 kg |
| Brand | NeuronBC |
|---|---|
| Origin | Beijing, China |
| Model | TA-2.0 Online & Offline 2.0 |
| Instrument Type | Online/Offline Dual-Mode TOC Analyzer |
| Detection Principle | Direct Conductivity Measurement |
| Oxidation Method | UV Photolysis (185 nm + 254 nm) |
| Measurement Range | 1–1000 ppb (as C) |
| Accuracy | ±3% of reading |
| Detection Limit | 1 ppb (as C) |
| Repeatability | ≤3% RSD |
| Resolution | 1 ppb |
| Conductivity Detection Range | 0.055–8.000 µS/cm |
| Sample Temperature Range | 1–95 °C |
| Ambient Operating Temperature | 5–65 °C |
| Power Supply | 100–240 VAC, 50 Hz, 120 W |
| Dimensions (L×W×H) | 400 × 240 × 270 mm |
| Weight | 8.5 kg |
| Data Storage Capacity | >5000 measurement records |
| Audit Trail | 16+ event log categories with timestamped traceability |
| User Access Control | 4-tier role-based authentication (username/password) compliant with FDA 21 CFR Part 11 |
| Connectivity | Ethernet port, RS-232 serial interface, analog power output |
| Display | Color touchscreen interface |
| Data Export | USB flash drive support |