Measurement Instruments
Filter
Showing 541–570 of 2724 results
| Brand | AUCMA |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | AKMS-03 (Standard Temp/Humidity Logger), AKMB-03D (Cryogenic Sensor Module), AKMB (Wireless Gateway) |
| Instrument Type | Multi-Channel |
| IP Rating | AKMS-03: IP67 |
| AKMB-03D & AKMB | IP54 |
| Operating Frequency | 433 MHz |
| Temperature Range | AKMS-03 (Standard Battery): –20 °C to +60 °C |
| AKMS-03 (Low-Temp Battery) | –40 °C to +70 °C |
| AKMB-03D | –200 °C to +150 °C |
| Temperature Accuracy | AKMS-03: ±0.5 °C |
| AKMB-03D | ±(0.3 + 0.005t) °C |
| Temperature Resolution | 0.1 °C |
| Humidity Range | 0–99% RH |
| Humidity Accuracy | ±3% RH (typical, 20–80% RH) |
| Memory Capacity | AKMS-03: 4 Mbit (≈100,000 records) |
| AKMB | ≥100,000 records (expandable) |
| Battery | AKMS-03: 2 × CR2450 (non-rechargeable, 2–5 yr life) |
| AKMB-03D & AKMB | 2 × 18650 Li-ion (rechargeable) |
| Communication | interBow® proprietary LPWAN protocol (433 MHz), GPRS/2G (mobile & Unicom networks) |
| Transmission Distance | ≥650 m (line-of-sight) |
| Data Security | End-to-end encrypted transmission |
| Brand | Auniontech |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | AUM-LSV1310 |
| Optical Wavelength | 1310 nm |
| Laser Safety Class | Class I (IEC 60825-1) |
| Output Power | <5 mW |
| Frequency Range | DC to 2.5 MHz |
| Displacement Noise Density | 5 pm/√Hz |
| Displacement Resolution | 1.28 nm |
| Maximum Velocity Range | 4.5 m/s |
| Velocity Resolution | <1 µm/s (at 1 kHz) |
| Displacement Repeatability (>10 Hz) | ±1 nm |
| Displacement Repeatability (<10 Hz) | ±10 nm |
| Vibration Frequency Accuracy | ±0.02% |
| Dynamic Velocity Range | 20 m/s (peak) |
| Sampling Rate | 5 MS/s (real-time digital acquisition) |
| Signal Output | Ethernet (TCP/IP, UDP), Digital TTL sync |
| Power Supply | 12–24 V DC |
| Power Consumption | <4 W |
| Operating Temperature | 0–50 °C |
| Relative Humidity | 35–85% RH (non-condensing) |
| Housing Material | Anodized Aluminum Alloy |
| Dimensions | 83.7 × 50 × 22 mm |
| Weight | 180 g |
| Brand | Auniontech |
|---|---|
| Model | Aut-S500 |
| Operating Temperature Range | -40 to 1000 °C |
| Accuracy | ±0.1 °C (when used with compatible interrogator) |
| Resolution | 0.02 °C |
| Wavelength Range | 1528–1568 nm (±0.1 nm center wavelength tolerance) |
| Thermal Sensitivity | 30–50 pm/°C |
| FWHM | <0.3 nm |
| Side Mode Suppression Ratio (SMSR) | >12 dB |
| Peak Reflectivity | >70% |
| Dimensions | 35 mm × 10 mm × 5.5 mm |
| Connector Type | FC/APC |
| Packaging | Ceramic Hermetic Encapsulation |
| Brand | Auniontech |
|---|---|
| Origin | Shanghai, China |
| Model | TP1-MS64-12CCR |
| Output Channels | 64 |
| Output Voltage Range | 0–12 V |
| Max. Output Current per Channel | 20 mA |
| Resolution | 14-bit |
| Full-Scale Accuracy | < ±50 mV |
| Voltage Rise Time | ≤30 µs |
| Output Ripple (20 MHz BW) | ≤50 mVₚ₋ₚ |
| Polling Rate | 10 kS/s |
| Interface | Dual 40-pin IDC headers, USB 2.0, 10/100BASE-T Ethernet |
| Dimensions (W×L×D) | 267 × 220 × 115 mm |
| Input Power | AC 220 V |
| Operating Temperature | 0–45 °C |
| Storage Temperature | −25–75 °C |
| Relative Humidity | 5–90 % RH (non-condensing) |
| Touchscreen | Integrated Windows-based capacitive touchscreen |
| Brand | JBO |
|---|---|
| Origin | Germany |
| Model | 0002 |
| Resolution | 0.01 mm |
| Measurement Range | Up to 50 mm (customizable) |
| Thread Compatibility | Right-hand & left-hand threads |
| Drive Mode | Motorized with constant-torque control |
| Data Output | Digital display + wireless transmission (eMCW protocol, i-stick receiver optional) |
| Probe Material | DLC-coated hardened steel, HV 0.05 > 5000 |
| Probe & Sleeve | Interchangeable modular system |
| Brand | Avisoft |
|---|---|
| Origin | Germany |
| Model | 116h / 416h / 816h / 1216h |
| Sampling Frequency Range | 20 Hz – 460 kHz (116h) |
| ADC Resolution | 16-bit |
| Input Sensitivity Range | −43.2 dBV to −3.2 dBV |
| Gain | 40 dB |
| Self-Noise | 18 dB SPL |
| Microphone Sensitivity | 500 mV/Pa |
| Connector | XLR-5 male |
| Dimensions (Microphone) | 36 × 36 × 60 mm |
| Weight (Microphone) | 65 g |
| Weight (116h Host) | 205 g |
| Power | USB-powered (UltrasoundGate host), optional USB power adapter for field use |
| Brand | Avisoft |
|---|---|
| Origin | Germany |
| Model | UltrasoundGate 116 |
| Sampling Rate | 20 Hz – 460 kHz |
| Weight | 205 g |
| Resolution | 16-bit |
| Input Sensitivity (max) | −43.2 dBV |
| Input Sensitivity (min) | −3.2 dBV |
| Gain | 40 dB |
| Features | Overload Indicator, Peak dB LED, Real-time Audio Monitoring & Streaming, Adjustable Gain |
| Brand | Axel Semrau |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | CHRONECT XPR |
| Instrument Type | Analytical Balance |
| Maximum Capacity | 220 g |
| Readability | 0.01 mg (10 µg) |
| Repeatability | RSD ≤ ±10% at 1 mg |
| Calibration | Fully Automatic |
| Sample Throughput | Up to 32 powder samples and 6 liquid reagents per run |
| Environmental Operation | Inert gas-compatible (N₂/Ar), glovebox-integrated |
| Compliance | Designed for GLP/GMP environments with audit trail support |
| Brand | Aiyao Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | AY1000 |
| Output Interface | RS422 Digital Output |
| Operating Frequency Range | ≥0.01 Hz |
| Noise Floor | Ultra-Low (Typ. <10 ng/√Hz below 1 Hz) |
| Form Factor | Miniaturized, Low-Power, Lightweight Design |
| Compliance | Fully Domesticated Architecture |
| Brand | AZ (Beijing Aozuo Ecological Instruments Co., Ltd.) |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | AZ-RF |
| Price | Upon Request |
| Rainfall Intensity Range | 0.2–240 mm/h |
| Raindrop Diameter Range | 0.1–5 mm |
| Rainfall Uniformity | ≥90% (scanning-type configuration) |
| Measurement Resolution | 0.01 mm (rainfall depth), 0.01 mm/h (intensity), 1 mm/h (intensity control step) |
| Control Levels | Up to 120 programmable intensity steps |
| Operating Height | 2.5–3.2 m (adjustable) |
| Coverage Area | Configurable up to 2 × 6 m² (12 m²) |
| Power Supply | 380 V AC (fixed), 24 V DC (portable) |
| Optional Disdrometer | Laser-based, 0.16–8 mm particle sizing, 0.2–20 m/s velocity detection, 440-class particle classification |
| Origin | Imported |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Model | AZ8829 |
| Channel Count | Single-Channel |
| Temperature Range | −40 to 85 °C (−40 to 185 °F) |
| Temp Accuracy | ±0.6 °C (−20 to 50 °C), ±1.2 °C (−40 to −20 °C and 51 to 85 °C) |
| Temp Resolution | 0.1 °C / 0.1 °F |
| RH Range | 0–100% RH |
| RH Accuracy | ±3% RH |
| RH Resolution | 0.1% RH |
| Memory Capacity | 16,000 data sets |
| Sampling Interval | 1 second to 2 hours |
| Display | 4-digit LCD with unit indicators (°C/°F/%RH/AL-H/AL-L) |
| Interface | RS232 (9600 baud), IRDA |
| Power | 3.6 V Li battery (½AA, 1.2 Ah), ~2-year life |
| Dimensions | 80 × 55 × 22 mm |
| Weight | 26 g |
| Enclosure | IP65-rated waterproof and abrasion-resistant housing |
| Alarm | Dual-color LED (red = out-of-limit alert |
| Brand | Microphotons |
|---|---|
| Focal Length | 35 mm (typical for AZURE-3514SWIR series) |
| Spectral Range | 900–1700 nm |
| Mount Type | C-Mount |
| Design Optimized For | InGaAs Sensor Arrays |
| Transmission Efficiency | >85% (avg. across band) |
| Working Distance | Fixed Focus (Standard Configuration) |
| Environmental Rating | Industrial Grade, Non-Sealed (Indoor Use) |
| Brand | Baineng |
|---|---|
| Origin | Shanghai, China |
| Model | BN-RL |
| Type | Non-contact Pulse Radar Water Level Sensor |
| Measurement Principle | 26 GHz Pulsed Time-of-Flight (PTOF) |
| Range Options | 0–15 m / 0–30 m / 0–45 m |
| Accuracy | ±2 mm (for 0–15 m range) |
| Beam Angle | 6° or 8° |
| Output Interfaces | RS-485 (Modbus RTU), 4–20 mA (optional), 0–5 V (optional) |
| Power Supply | 12 VDC (RS-485 mode) or 24 VDC (4–20 mA loop-powered) |
| Max. Current Consumption | 12 mA |
| Operating Temperature | −40 °C to +100 °C |
| Enclosure Rating | IP68 |
| Wave Filtering | Built-in dynamic surface wave suppression algorithm |
| Maintenance | Maintenance-free design |
| Brand | BCC |
|---|---|
| Origin | Hebei, China |
| Model | KSD-1000 |
| Instrument Type | Relative Humidity (RH) Sensor |
| Measurement Range | 0–100% RH |
| Accuracy | ±1.5% RH |
| Resolution | 1% RH |
| Operating Ambient Temperature | −20 to +50 °C |
| Power Supply | 220 VAC, 50 Hz |
| Sensing Principle | Polymer Thin-Film Capacitive |
| Output Signal | 4–20 mA DC |
| Enclosure Rating | IP65 (Dust-Resistant & Corrosion-Resistant) |
| Key | Origin: Switzerland |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | BCG450 |
| Pricing | Available Upon Request |
| Brand | BEAMEX |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | BOS-25 |
| Price | USD 9,999 |
| Brand | Beifen Sanpu |
|---|---|
| Origin | Hebei, China |
| Manufacturer Type | Manufacturer |
| Product Category | Domestic |
| Model | 1 mL |
| Type | Volumetric Flowmeter |
| Measurement Principle | Volumetric Displacement via Soap Film Transit Time |
| Volume Calibration | 1 mL |
| Typical Uncertainty | ±0.5% of full scale (subject to operator technique, temperature/pressure correction, and calibration traceability) |
| Operating Pressure Range | Near-ambient (≤ 5 kPa differential) |
| Temperature Sensitivity | Requires concurrent gas temperature measurement for standardized volume correction (e.g., to 25 °C, 101.325 kPa) |
| Compliance Basis | Designed in accordance with ISO 4064-2 (Water meters — Part 2: Test methods and equipment) principles for volumetric displacement verification |
| Brand | Beifen Sanpu |
|---|---|
| Origin | Hebei, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | 101B |
| Product Type | Volumetric Flowmeter |
| Flow Range (Nominal) | 0.2–60 mL/min |
| Flow Range (Extended) | 0.1–100 mL/min |
| Accuracy | ±1% of reading |
| Repeatability | <0.5% |
| Minimum Flow Resolution | 0.1 mL/min |
| Time Measurement Accuracy | ±0.1 s (internal calculation to 0.01 s) |
| Operating Temperature Compensation | Yes |
| Pressure Compensation | Yes |
| Volume Correction | Yes |
| Power Supply | Built-in 4.8 V / 700 mAh rechargeable battery (standby >24 h |
| Auto Power Management | Backlight off after 1 min idle |
| Dimensions | 90 × 150 × 280 mm |
| Weight | ~1.3 kg |
| Compliance | JJG 586–2006 Verification Regulation for Soap Film Flowmeters |
| Brand | Beifen Sanpu |
|---|---|
| Origin | Hebei, China |
| Manufacturer Type | Manufacturer |
| Origin Category | Domestic (China) |
| Model | 500 mL |
| Product Type | Positive Displacement Flowmeter |
| Price Range | USD 0.15 – 720 (FOB) |
| Volume Calibration | 500 mL ±0.5% (gravimetrically verified) |
| Operating Pressure Range | ≤10 kPa (gauge) |
| Temperature Range | 15–30 °C (ambient, uncorrected) |
| Resolution | 0.1 s (with digital stopwatch) |
| Material | Borosilicate glass (DIN ISO 3585), PTFE-sealed inlet/outlet ports |
| Compliance | ASTM D6196-22 Annex A2 (for low-flow gas calibration), ISO 4064-2:2014 (volumetric flowmeter verification principles), GB/T 28296-2012 (Chinese standard for soap film flowmeters) |
| Brand | Beifen Sanpu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | FA-2004 Precision Analytical Balance |
| Instrument Type | Precision Balance |
| Maximum Capacity | 200 g |
| Readability | 0.1 mg |
| Repeatability | 0.1 mg |
| Pan Diameter | 90 mm |
| Calibration | Internal Automatic Calibration |
| Interface | RS232C Serial Output |
| Display | Backlit LCD with Large Font |
| Functions | Tare, Counting, Unit Conversion (g, ct, oz), Accumulation, Below-Balance Weighing, Adjustable Integration Time & Sensitivity |
| Power Supply | External AC Adapter |
| Brand | Beifen Sanpu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | GL-103A |
| Price | USD 650 (approx.) |
| Flow Measurement Principle | Volumetric Displacement (Soap Film Method) |
| Flow Range | 2 mL/min to 2 L/min |
| Accuracy | ±1% of reading |
| Temperature & Pressure Compensation | Yes |
| Display | LCD with real-time P, T, V, Q readouts |
| Timing Resolution | 0.01 s (range: 0.1–600.0 s) |
| Power | Rechargeable 4.8 V / 700 mAh battery (standby >300 h |
| Brand | Beifen Sanpu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | GL-103B |
| Price | USD 685 (approx.) |
| Flow Measurement Principle | Volumetric (Soap Film Method) |
| Flow Range | 5 mL/min – 5 L/min |
| Accuracy | ±1% of reading |
| Display | LCD with real-time temperature, pressure, volume, and flow rate |
| Timing Resolution | 0.01 s (range: 0.1–600.0 s) |
| Power | Rechargeable 4.8 V / 700 mAh battery (standby >300 h |
| External Power Input | 9 V DC (simultaneous operation & charging) |
| Operating Interface | Three-button control with 5-point averaging function |
| Environmental Compensation | Built-in temperature and pressure correction for volumetric-to-mass flow conversion |
| Brand | Beifen Sanpu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | GL-105B |
| Price | USD 820 (FOB) |
| Flow Measurement Principle | Volumetric (Soap Film Method) |
| Flow Range | 30 mL/min – 30 L/min |
| Accuracy | ±1% of reading |
| Display | LCD with real-time temperature, pressure, volume, and flow rate |
| Timing Resolution | 0.01 s (range: 0.1–600.0 s) |
| Power | Rechargeable 4.8 V / 700 mAh battery (standby >300 h |
| Operating Interface | Three-button control with 5-point averaging function |
| Environmental Compensation | Built-in temperature and pressure correction for volumetric-to-mass flow conversion |
| [Brand | Beifen Sanpu |
|---|---|
| Model | HPZM-103A |
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Flow Range | 4–1000 mL/min |
| Temperature Range | −10 °C to 50 °C |
| Pressure Range | 101.3 kPa ±50 kPa |
| Accuracy | ΔQ < ±1% |
| Repeatability | < 0.5% |
| Volume Resolution | 0.1 mL |
| Time Resolution | 0.1 s (internal calculation to 0.01 s) |
| Power | Rechargeable 4.8 V battery (standby >24 h |
| Brand | Beifen Sanpu |
|---|---|
| Origin | Beijing, China |
| Manufacturer | Beifen Sanpu Instrument Co., Ltd. |
| Type | Volumetric Flow Calibrator |
| Model | MZ-103A |
| Measurement Principle | Soap Film Transit Time |
| Flow Range | 2 mL/min to 2 L/min |
| Accuracy | ±1% of reading |
| Repeatability | <0.5% |
| Time Resolution | 0.01 s (displayed as 0.1 s) |
| Volume Measurement | Fixed calibrated glass tube |
| Operating Temperature | 0–40 °C |
| Power | Rechargeable 4.8 V / 700 mAh battery (standby >24 h) or external 9 V DC input |
| Dimensions | 90 mm × 150 mm × 280 mm |
| Compliance | Designed for field calibration per ISO 6145-4 and ASTM D6196 Annex A2 |
| Brand | Beifen Sanpu |
|---|---|
| Origin | Beijing, China |
| Manufacturer | Beifen Sanpu Instrument Co., Ltd. |
| Model | ZM-101B |
| Type | Portable Electronic Soap Film Flowmeter |
| Measurement Principle | Volumetric Displacement via Optical Detection of Soap Film Transit |
| Flow Range (ZM-101B) | 0.1–100 mL/min |
| Accuracy | ±1% of reading |
| Repeatability | <0.5% |
| Volume Resolution | 0.1 mL |
| Time Resolution | 0.01 s (displayed as 0.1 s) |
| Temperature & Pressure Compensation | Built-in sensors with real-time correction |
| Power | Rechargeable 4.8 V / 1800 mAh battery (standby >24 h) |
| Dimensions | 90 × 150 × 280 mm |
| Weight | 0.6 kg |
| Compliance | JJG 586–2006 “Verification Regulation for Soap Film Flowmeters” |
| Brand | Beifen Sanpu |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | ZM-101B |
| Price | USD 560 (approx.) |
| Flow Measurement Principle | Volumetric (Soap Film Method) |
| Accuracy | ±1% of reading |
| Repeatability | <0.5% |
| Minimum Detectable Flow | 0.1 mL/min |
| Time Resolution | 0.01 s (displayed as 0.1 s) |
| Standard Range | 0.5–100 mL/min |
| Operating Temperature | 0–40 °C |
| Ambient Pressure Compensation | Integrated barometric sensor |
| Ambient Temperature Compensation | Integrated thermistor |
| Power Supply | Internal 4.8 V / 700 mAh rechargeable battery (standby >24 h) |
| Auto-Power Management | Backlight off after 1 min idle |
| Dimensions | 90 × 150 × 280 mm |
| Weight | 1.3 kg |
| Brand | Beifen Sanpu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Manufacturer |
| Product Category | Domestic |
| Model | ZM-102B |
| Pricing | USD 560 (est.) |
| Flow Measurement Principle | Volumetric (Soap Film) |
| Flow Range | 1–1000 mL/min |
| Accuracy | ±1% of reading |
| Repeatability | <0.5% |
| Volume Resolution | 0.1 mL |
| Time Resolution | 0.01 s (internal), displayed at 0.1 s |
| Temperature Range | –10 °C to +50 °C |
| Pressure Range | 101.3 kPa ±50 kPa |
| Built-in Rechargeable Battery | 4.8 V / 700 mAh |
| Standby Time | >24 h |
| Auto Power-Down | Backlight off after 1 min |
| Dimensions | 90 × 150 × 280 mm |
| Weight | 1.3 kg |
| Compliance | JJG 586–2006 (Calibration Regulation for Soap Film Flowmeters) |
| Brand | Beifen Sanpu |
|---|---|
| Model | ZM-102B |
| Type | Volumetric Flowmeter |
| Measurement Principle | Soap Film Displacement (Gravimetric-Volumetric Timing) |
| Flow Range | 1–1000 mL/min |
| Accuracy | ±1% of reading |
| Repeatability | <0.5% |
| Volume Resolution | 0.1 mL |
| Time Resolution | 0.01 s (displayed as 0.1 s) |
| Temperature & Pressure Compensation | Built-in sensor-based correction |
| Power | Rechargeable 4.8 V / 700 mAh Li-ion battery (standby >24 h) |
| Dimensions | 90 × 150 × 280 mm |
| Weight | 1.3 kg |
| Compliance | JJG 586–2006 “Verification Regulation for Soap Film Flowmeters” |
| Brand | Beifen Sanpu |
|---|---|
| Origin | Beijing, China |
| Manufacturer | Beifen Sanpu Instrument Co., Ltd. |
| Model | ZM-102B |
| Type | Electronic Soap Film Flowmeter |
| Measurement Principle | Volumetric displacement via soap film transit time |
| Flow Range | 1–1000 mL/min |
| Accuracy | ±1% of reading |
| Repeatability | <0.5% |
| Volume Resolution | 0.1 mL |
| Time Resolution | 0.01 s (displayed as 0.1 s) |
| Temperature & Pressure Compensation | Built-in sensor-based correction |
| Operating Power | Internal 4.8 V / 1800 mAh rechargeable battery (standby >24 h) or external 9 V DC input |
| Dimensions | 90 × 150 × 280 mm |
| Weight | 0.6 kg |
| Compliance | JJG 586–2006 “Verification Regulation for Soap Film Flowmeters” |