Measurement Instruments
Filter
Showing 721–750 of 2723 results
| Brand | D&T |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | JP1204 |
| Instrument Type | Analytical Balance |
| Maximum Capacity | 120 g |
| Readability | 0.1 mg |
| Repeatability (5% load) | ±0.2 mg |
| Repeatability (near full load) | ±0.3 mg |
| Linearity Error | ±0.3 mg |
| Calibration Method | Internal (isoCAL) |
| Stabilization Time | ≤3 s |
| Pan Diameter | Φ90 mm |
| Dimensions (W×D×H) | 210 × 310 × 315 mm |
| Draft Shield Height | 210 mm |
| Operating Temperature | 10–30 °C |
| Operating Humidity | 20–85% RH (non-condensing) |
| Temperature Drift | ≤5 ppm/°C |
| Warm-up Time | <15 min |
| Power Supply | 100–240 VAC, 50/60 Hz |
| DC Output | 12 VDC, 1 A |
| Communication Interface | RS232 (configurable baud rates: 300–9600) |
| Display | VA LCD |
| Environmental Compensation | Automatic temperature & time-triggered isoCAL |
| Shock Protection | Four-stage damping system |
| Accuracy Class | ISO 9001-compliant design |
| Brand | D&TC Dantec |
|---|---|
| Origin | Tianjin, China |
| Model | ES1200 |
| Maximum Capacity | 1200 g |
| Readability | 10 mg |
| Repeatability | ±10 mg |
| Linearity Error | ±10 mg |
| Stabilization Time | ≤2.5 s |
| Pan Diameter | Φ160 mm |
| Dimensions (W×D×H) | 210 × 310 × 90 mm |
| Operating Temperature | 13–25 °C |
| Operating Humidity | 10–70 % RH |
| Warm-up Time | 30–60 min |
| Power Input | 220 V AC / 50 Hz |
| Output | 7.5 V DC / 600 mA |
| RS232 Baud Rates | 300–9600 |
| Accuracy Class | Class II |
| Sensor Type | Gold-plated ceramic variable-capacitance transducer |
| Environmental Compensation | Integrated high-precision humidity & temperature sensors |
| Display | Backlit LCD with intuitive layout |
| Weighing Units | g, ct, oz, lb, etc. |
| Modes | Standard weighing, counting, percentage, checkweighing |
| Construction | Corrosion-resistant stainless-steel pan |
| Brand | D&T |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Authorized Distributor |
| Regional Classification | Domestic (China) |
| Model | XE2.7S |
| Instrument Type | Ultra-Micro Balance |
| Maximum Capacity | 2.1 g |
| Readability | 0.1 µg |
| Accuracy Class | Class I (per EU Directive 2014/31/EU) |
| Verification Scale Interval (e) | 1 µg |
| Minimum Weight (USP <41>) | 0.82 mg (recommended), 1.3 mg (typical) |
| Sensitivity Drift | 5 ppm/K (10–30 °C) |
| Tare Range | <100% of max capacity |
| Calibration | Internal (IsoCAL™ automatic temperature- and time-controlled calibration) |
| Stabilization Time | 8 s (typical) |
| Measurement Time | 12 s (typical) |
| Pan Diameter | Ø30 mm |
| Chamber Height | 80 mm |
| Dimensions (L×W×H) | 90 mm × 295 mm × 150 mm |
| Net Weight | ~4.7 kg |
| Operating Environment | 18–23 °C, 50–75% RH, temp. drift ≤1 °C/h |
| Power Supply | 100–240 VAC, 50/60 Hz, 0.5–1.0 A |
| Compliance | FDA 21 CFR Part 11 (ALCOA+ principles), GLP/GMP data integrity, OIML R111-1 E1 external calibration standard |
| Brand | D&T Corp |
|---|---|
| Origin | Tianjin, China |
| Model | ES8K |
| Maximum Capacity | 8000 g |
| Readability | 0.1 g |
| Repeatability | ±0.2 g |
| Linearity Error | ±0.2 g |
| Operating Temperature | 13–25 °C |
| Operating Humidity | 10–70 % RH |
| Response Time (avg.) | ≤2.5 s |
| Display Size | 185 × 100 mm |
| Pan Size | 370 × 310 mm |
| Dimensions (W×D×H) | 370 × 310 × 140 mm |
| Warm-up Time | 30–60 min |
| Power Supply | AC 220 V / 50 Hz → DC 7.5 V / 600 mA |
| Accuracy Class | Class II |
| Sensor Type | Gold-plated ceramic variable-capacitance transducer |
| Environmental Compensation | Integrated high-precision humidity & temperature sensors |
| Communication Interface | RS232 bidirectional |
| Weighing Modes | Standard, Piece Counting, Percentage, Checkweighing |
| Units | g, ct, oz, dwt |
| Construction | Anti-static, corrosion-resistant, spill-proof stainless steel pan and reinforced streamlined chassis |
| Brand | Dante / D&T |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | ES-LMZ |
| Instrument Type | Precision Laboratory Balance for Coal Testing |
| Readability | 0.01 mg to 10 mg (model-dependent) |
| Calibration | isoCAL Fully Automatic Internal Calibration |
| Repeatability | 0.04 mg (at 5% load, ES-L55-MZ) |
| Sensitivity Drift | 5 ppm/K (10–30 °C) |
| Stabilization Time | ≤2.5 s |
| Weighing Pan Diameter | Φ48 mm (standard) or custom |
| Dimensions | 227.17 × 144.5 × 94.2 mm |
| Power Input | DC 24 V ±10%, 0.1 A |
| Operating Temperature | 10–30 °C |
| Operating Humidity | 30–85% RH |
| Interface | RS232 / RS485 |
| Communication Protocols | DAT232, DAT485 (MODBUS-compatible), customizable |
| Brand | Dantec Dynamics |
|---|---|
| Origin | Denmark |
| Manufacturer Status | Authorized Distributor |
| Origin Category | Imported |
| Model | 81X30 |
| Measurement Capability | Planar (2D/3D) |
| Frame Rate | >100 Hz |
| Velocity Range | 0–0.5 m/s |
| Accuracy | ±1% of full scale |
| Measurement Area | 190 mm × 120 mm |
| Illumination Source | High-power pulsed LED array with fiber-coupled lens system |
| Camera | FlowSense USB 2M-165 (2 MP, global shutter, 165 fps @ full resolution) |
| Synchronization | Software-controlled via DynamicStudio v7.x |
| Data Acquisition & Analysis | DynamicStudio PIV software suite |
| Brand | Dantec Dynamics |
|---|---|
| Origin | Denmark |
| Model | FiberPDA |
| Type | Phase Doppler Anemometer (PDA) |
| Measurement Principle | Phase Doppler Interferometry |
| Velocity Range | –300 to +1000 m/s |
| Particle Diameter Range | 0.5 µm to 10,000 µm |
| Velocity Uncertainty | ±0.1% of reading |
| Size Accuracy | <1% |
| Dynamic Range | 1:50 |
| Optical Configuration | Fiber-coupled dual-beam interferometric setup |
| Signal Processing | Real-time digital pulse processing with adaptive thresholding and burst-mode analysis |
| Brand | Dantec Dynamics |
|---|---|
| Origin | Denmark |
| Model | MicroPIV |
| Measurement Domain | 15 µm × 15 µm to 3 mm × 3 mm |
| Velocity Range | 0–2 m/s |
| Accuracy | ±1% of measured velocity |
| Spatial Resolution | Down to ~1 µm (dependent on optics & particle seeding) |
| Temporal Resolution | Low-frequency operation (typically < 100 Hz, configurable via laser pulse separation and camera frame rate) |
| Optical Configuration | Inverted fluorescence microscope optimized for PIV |
| Camera Option | HiSense MkII sCMOS sensor with peak quantum efficiency of 72% |
| Upgrade Paths | Unstructured grid PIV, MicroLIF (Micro Laser-Induced Fluorescence) |
| Brand | Dantec Dynamics |
|---|---|
| Origin | Denmark |
| Model | MiniPIV |
| Measurement Plane | 2D/3D |
| Frame Rate | >100 Hz |
| Velocity Range | 0–5 m/s |
| Accuracy | ±1% of reading |
| Measurement Area | 150 mm × 120 mm |
| Camera | FlowSense USB 2M-165 (1920 × 1200 px, 165 fps) |
| Laser Source | RayPower (2/5/10 W, air-cooled, TEM₀₀ mode) |
| Software Platform | DynamicStudio |
| Brand | Dantec Dynamics |
|---|---|
| Origin | Denmark |
| Manufacturer Status | Authorized Distributor |
| Import Category | Imported |
| Model | Low-Frequency PIV |
| Measurement Capability | Planar (2D/3D) |
| Measurement Frequency | Low-Frequency |
| Velocity Range | 0–1000 m/s |
| Accuracy | ±1% |
| Measurement Area | 200 mm × 200 mm to 1000 mm × 1000 mm |
| Brand | Dantec Dynamics |
|---|---|
| Origin | Denmark |
| Model | VV |
| Measurement Capability | 3D3C (Three-Dimensional, Three-Component) |
| Velocity Range | 0–300 m/s |
| Measurement Volume | 200 mm × 200 mm × 40 mm |
| Accuracy | ±1% of measured velocity |
| Temporal Resolution | Low-frequency acquisition (configurable via camera framing rate and laser repetition rate) |
| Particle Seeding Density | 0.05–0.07 particles per pixel (PPP) |
| Camera Configuration | 2–4 synchronized high-speed CMOS cameras |
| Illumination | Volumetric light sheet or tomographic LED/laser array |
| Software Platform | DynamicStudio with GPU-accelerated volumetric reconstruction (up to 240 CUDA cores) |
| Brand | Dantec |
|---|---|
| Origin | Denmark |
| Model | FiberFlow |
| Flow Measurement Principle | Laser Doppler Anemometry (LDA) |
| Velocity Range | 0–1500 m/s |
| Velocity Uncertainty | < 0.1% |
| Measurement Dimensionality | 1D, 2D, and 3D vector velocity |
| Optical Stability | High (thermally compensated interferometric design) |
| Particle Requirement | Seeded flow (with reflective/scattering particles) |
| Installation Type | Benchtop or integrated rig-mount |
| Compliance | ISO 9001-manufactured, compatible with GLP/GMP data integrity workflows (audit trail, user access levels, electronic signatures via optional software modules) |
| Brand | Dantec |
|---|---|
| Origin | Denmark |
| Manufacturer Status | Authorized Distributor |
| Origin Category | Imported |
| Model | FlowExplorer |
| Price Range | USD 13,500 – 40,500 (est. based on ¥100,000–300,000 @ 7.4 CNY/USD) |
| Type | Volumetric Flow Measurement System |
| Laser Source | DPSS |
| Output Power Options | 70 mW / 150 mW / 500 mW |
| Measurement Distance Options | 150 mm / 300 mm / 500 mm / 750 mm |
| Signal Processor Models | BSA F600 / BSA F800 |
| Max Processing Frequency | 120 MHz / 200 MHz |
| Max Measurable Velocity (lens-dependent) | 432 m/s / 798 m/s |
| Data Acquisition Rate | >100,000 bursts/sec |
| ADC Resolution | 16-bit |
| Calibration | NIST-traceable certificate included |
| Connectivity | Wi-Fi enabled |
| Integrated Oscilloscope Functionality | Yes |
| Brand | Dantec |
|---|---|
| Origin | Denmark |
| Manufacturer Status | Authorized Distributor |
| Origin Category | Imported |
| Model | FlowMap |
| Pricing | Upon Request |
| OH Excitation Laser Energy | 22–25 mJ per Pulse |
| ICCD Gating Width | 3 ns |
| Photocathode Quantum Efficiency | ~30% |
| CCD Quantum Efficiency | ~70% |
| Synchronizer Timing Resolution | 250 ps |
| Brand | Dantec |
|---|---|
| Origin | Denmark |
| Manufacturer Status | Authorized Distributor |
| Origin Category | Imported |
| Model | StreamLine Pro |
| Product Type | Electromagnetic |
| Price Range | USD 13,500 – 40,500 (based on configuration and probe options) |
| Brand | Dantsin |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Imported |
| Model | 2020 / 3020 |
| Pricing | Available Upon Request |
| Brand | Dantsin |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Scopecheck MB |
| Pricing | Upon Request |
| Configuration | Hybrid (Optical + Contact Probing Capable) |
| Operation Mode | Fully Automatic |
| CMM Class | Shop-Floor Hardened |
| Measurement Principle | Non-Contact Optical Imaging (Telecentric & Parallel Illumination) + Optional Tactile Probing |
| Measuring Volume Range | 500–2000 mm (X) × 600–3000 mm (Y) × 450–1500 mm (Z) |
| Volumetric Accuracy | ≤ 0.1 µm (at 20 ± 1 °C, thermal drift ≤ 0.5 K/h) |
| Maximum Scanning Speed | 250 mm/s |
| Base Material | Precision-Graded Granite |
| Guidance System | Air-bearing Linear Rails |
| Illumination System | Patented Parallel-Beam Telecentric Lighting with Removable Bottom Light Module |
| Environmental Compliance | ISO 10360-2, ISO 15530-3, VDI/VDE 2617 Part 9 |
| Origin | Imported |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Model | DaqLink |
| Pricing | Available Upon Request |
| Key | Channels: 8 |
|---|---|
| Sampling Resolution | 16-bit |
| Max Single-Channel Sampling Rate | 4,000 Hz |
| Internal Memory | 512 KB RAM (supports up to 100 logging sessions) |
| Battery | Rechargeable 7.2 V NiMH, ~25–40 h operation |
| Display | 64×128-pixel graphical LCD |
| Input Types | 0–24 mA, 0–50 mV, 0–10 V, NTC, PT-100, thermocouples (J/K/T), pulse/frequency (Ch1 only) |
| Accuracy | ±0.5% of full scale (typical across analog ranges) |
| Compliance | CE, FCC |
| Enclosure Rating | IP67 (with optional weatherproof housing) |
| Interface | USB 1.1 |
| Operating Temperature | 0–50 °C |
| Dimensions | 182 × 100 × 28 mm |
| Weight | 450 g |
| Brand | DataTaker |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | CEM20 |
| Price | USD 1,120 (FOB) |
| Input Channels | 20 per module |
| Max. Modules per DT80 (v2+) | 5 |
| Max. Modules per DT85 (v2+) | 16 |
| Max. Analog Inputs | 300 (DT80), 960 (DT85) |
| Isolation | Dual-channel galvanic isolation per input pair |
| Input Configurations | 2 isolated differential or 3 shared single-ended per channel |
| Max. Input Voltage | 30 Vdc |
| Sampling Rate | 12 Hz (per CEM20) |
| Power Supply | 12 Vdc ±5% (from host or external) |
| Power Consumption | 0.36 W (active), <0.1 W (sleep mode) |
| Operating Temperature | −45 °C to +70 °C |
| Enclosure | Anodized aluminum housing with steel end plates |
| Dimensions | 180 × 100 × 50 mm |
| Weight | 0.55 kg |
| Communication Interface | Digital control via 5D/6D I/O lines |
| Max. Cable Distance (host to last CEM20) | 100 m |
| Addressing | 4-bit DIP switch (address range 1–15) |
| Status Indication | LED indicators for power, communication, and sampling activity |
| Included | Analog interface cable for DT80/DT85 host connection |
| Brand | DataTaker |
|---|---|
| Origin | Imported |
| Model | DT80 |
| Analog Inputs | 15 single-ended / 10 differential / 5 three- or four-wire |
| Resolution | 8-bit |
| Max Sampling Rate | 40 Hz |
| Excitation Outputs | 5 V / 12 V selectable, up to 150 mA |
| Digital I/O & Counter | 32-bit, up to 100 kHz |
| Communication Ports | RJ45 Ethernet, USB, RS232 (host), RS232/RS485/RS422 (configurable) |
| Protocols | MODBUS RTU (master/slave), MODBUS TCP/IP, SDI-12, ASCII |
| Network Support | HTTP, FTP, SMTP |
| Power Supply | 10–30 VDC |
| RTC Accuracy | ±1 min/year (0–40 °C), ±4 min/year (−40–70 °C) |
| Operating Temperature | −40 to +70 °C, 85% RH non-condensing |
| Enclosure Rating | IP54 |
| Dimensions | 180 × 137 × 65 mm |
| Weight | 1.5 kg |
| Internal Storage | 128 MB CompactFlash (upgradable to 4 GB), optional 8 GB USB storage |
| Internal Battery | 6 V @ 1.2 Ah |
| Origin | Australia |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | DT80 Series 2 |
| Pricing | Upon Request |
| Brand | DataTaker |
|---|---|
| Origin | Imported |
| Model | DT80G |
| Analog Inputs | 15 single-ended / 10 differential / 5 three- or four-wire |
| Resolution | 8-bit |
| Sampling Rate | up to 40 Hz |
| Vibrating Wire Channel | integrated, 500–5 kHz range, coil resistance 50–200 Ω, excitation pulse: 36 V @ 200 µs |
| Digital I/O & Counter | 32-bit, up to 100 kHz |
| Communication | RJ45 (Ethernet), USB, RS232/RS485/RS422 |
| Protocols | MODBUS RTU/TCP, SDI-12, ASCII, HTTP, FTP, SMTP |
| Power | 10–30 VDC |
| Operating Temperature | −40 to +70 °C |
| Enclosure Rating | IP54 |
| Dimensions | 180 × 137 × 65 mm |
| Weight | 1.5 kg |
| Internal Storage | 128 MB CompactFlash (upgradable to 4 GB), optional 8 GB USB drive |
| Real-Time Clock Accuracy | ±1 min/year (0–40 °C), ±4 min/year (−40–70 °C) |
| Internal Battery | 6 V @ 1.2 Ah |
| Brand | DataTaker |
|---|---|
| Origin | Imported |
| Model | DT82E |
| Analog Inputs | 6 single-ended / 4 differential / 2 three- or four-wire RTD channels |
| Resolution | 18-bit |
| Sampling Rate | up to 40 Hz |
| Excitation Outputs | 5 V / 12 V selectable, max 150 mA |
| Digital I/O | 8 configurable channels with 32-bit counter (100 kHz max) |
| Communication | RJ45 Ethernet, RS232 serial, SDI-12 master interface |
| Protocols | SDI-12, Modbus RTU (master), Modbus TCP/IP |
| Storage | 128 MB CompactFlash (upgradable), optional 8 GB USB flash |
| Operating Temperature | −40 °C to +70 °C |
| Enclosure Rating | IP54 |
| Dimensions | 180 × 137 × 65 mm |
| Weight | 900 g |
| Real-Time Clock Accuracy | ±1 min/year (0–40 °C), ±4 min/year (−40–70 °C) |
| Power Supply | 10–30 VDC |
| Origin | Australia |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | DT82e |
| Pricing | Upon Request |
| Brand | dataTaker |
|---|---|
| Origin | Imported |
| Model | DT82I |
| Analog Inputs | 6 single-ended / 4 differential / 2 three- or four-wire |
| Resolution | 18-bit |
| Sampling Rate | up to 40 Hz |
| Analog Output | 16-bit DAC, 0–10 V or 0–20 mA |
| Excitation Outputs | 5 V / 12 V selectable, max. 150 mA |
| Digital I/O & Counter | 32-bit, up to 100 kHz |
| Communication Ports | RJ45, RS232 (host), RS232/RS485/RS422 |
| Protocols | MODBUS RTU (master/slave), MODBUS TCP/IP, ASCII, SDI12 |
| Power Supply | 10–30 VDC |
| Operating Temperature | −40 to +70 °C |
| Enclosure Rating | IP54 |
| Dimensions | 180 × 137 × 65 mm |
| Weight | 900 g |
| Internal Storage | 128 MB CompactFlash (upgradable to 4 GB), optional 8 GB USB storage |
| Real-Time Clock Accuracy | ±1 min/year (0–40 °C), ±4 min/year (−40–70 °C) |
| Built-in Battery | 6 V @ 1.2 Ah |
| Brand | DataTaker |
|---|---|
| Origin | Imported |
| Model | DT85 |
| Analog Inputs | 48 single-ended / 32 differential / 16 three- or four-wire |
| Resolution | 18-bit |
| Sampling Rate | up to 40 Hz |
| Excitation Outputs | 5 V / 12 V, 150 mA max |
| Digital I/O & Counters | 32-bit, up to 100 kHz |
| Communication Ports | RJ45 (Ethernet), USB, RS232 (host), RS232/RS485/RS422 (multi-protocol) |
| Protocols | MODBUS RTU/TCP/IP, SDI-12, ASCII, HTTP, FTP, SMTP |
| Power Supply | 10–30 VDC |
| Operating Temperature | −40 °C to +70 °C |
| Enclosure Rating | IP54 |
| Dimensions | 300 × 137 × 65 mm |
| Weight | 2.5 kg |
| Internal Memory | 128 MB CompactFlash (upgradable to 4 GB), optional 8 GB USB storage |
| Real-Time Clock Accuracy | ±1 min/year (0–40 °C), ±4 min/year (−40–70 °C) |
| Origin | Australia |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | DT85 Series 2 |
| Pricing | Upon Request |
| Brand | DataTaker |
|---|---|
| Origin | Imported |
| Model | DT85G |
| Analog Input Channels | 48 single-ended / 32 differential / 16 three- or four-wire |
| Resolution | 18-bit |
| Sampling Rate | up to 40 Hz |
| Excitation Outputs | 5 V / 12 V, max 150 mA |
| Digital I/O & Counter | 32-bit, up to 100 kHz |
| Vibrating Wire Channel | integrated, 500–5000 Hz range, coil resistance 50–200 Ω, excitation pulse 36 V @ 200 µs |
| Communication | RJ45 (Ethernet), USB, RS232/RS485/RS422 |
| Protocols | MODBUS RTU/TCP, SDI-12, ASCII, HTTP, FTP, SMTP |
| Power | 10–30 VDC |
| Internal Battery | 6 V @ 4 Ah |
| Operating Temperature | −40 °C to +70 °C |
| Storage | 128 MB CF (upgradable to 4 GB), optional 8 GB USB drive |
| Enclosure Rating | IP54 |
| Dimensions | 300 × 137 × 65 mm |
| Weight | 2.5 kg |
| RTC Accuracy | ±1 min/year (0–40 °C), ±4 min/year (−40–70 °C) |
| Brand | Davis |
|---|---|
| Model | 6345 |
| Origin | USA |
| Instrument Type | Wireless Soil Moisture and Temperature Monitoring System |
| Operating Temperature (Host) | −40 °C to +65 °C |
| Storage Temperature | −45 °C to +70 °C |
| Power Supply | CR123A 3 V Li battery + 0.5 W solar panel |
| Battery Life | 8 months (no sun), up to 2 years (typical insolation) |
| Wireless Range | up to 300 m (line-of-sight), 75–150 m (obstructed) |
| Radio Frequency | 868.0–868.6 MHz, 8 channels, ~8 mW output |
| Soil Moisture Sensor (6440) | Resistive type, 0–200 cbar range, 1 cbar resolution, 4.6 m standard cable (extendable to 30 m) |
| Soil Temperature Sensor (6470) | Thermistor-based, −40 °C to +65 °C, ±0.5 °C accuracy, 1 °C resolution, 4.6 m standard cable (extendable to 244 m on 22 AWG) |
| Data Logging | Non-volatile RAM + optional SD card storage |
| Display | Backlit LCD console (151 × 86 mm active area) |
| Mounting Mast | 1 m galvanized steel tube, Ø33 mm |
| Host Dimensions | 158.75 × 57.15 × 200 mm |
| Host Weight | 0.49 kg (battery included, sensors excluded) |
| Console Dimensions | 270 × 156 × 41 mm |
| Console Weight | 0.85 kg (with batteries) |
| Software | WeatherLink v6.x (Windows/macOS), supports CSV export, time-series plotting, alarm thresholds, and multi-station aggregation |