Measurement Instruments
Filter
Showing 781–810 of 2723 results
| Brand | Distek |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | LabEye |
| Pricing | Upon Request |
| Brand | DITECT |
|---|---|
| Origin | Japan |
| Model | PIV 2D2C, PTV 2D2C (2D/3D), PIV 2D3C (3D) |
| Measurement Capability | 3D3C volumetric velocity field reconstruction |
| Frame Rate Support | ≥100 Hz |
| Supported Image Formats | AVI, WMV, JPG, BMP, TIFF, PNG |
| Data Export Formats | Project (.flw), CSV |
| Correlation Method | Direct Cross-Correlation (PIV), Binary Correlation (PTV) |
| Physical Quantities Computed | Vorticity, Turbulent Kinetic Energy, Reynolds Stresses, Velocity Gradient Tensor, RMS Velocity Fluctuations |
| Operating System | 64-bit Windows with SSE2/SSE3 instruction set support |
| CPU Architecture | Multi-core parallel processing optimized |
| Brand | DJB |
|---|---|
| Origin | Germany |
| Model | DJB A-Series Single-Axis Industrial Accelerometer |
| Sensitivity Range | 1.7–250 pC/g (IEPE/charge-output variants) |
| Mass | 20–150 g |
| Maximum Shock Resistance | 1000 g (peak) |
| Resonant Frequency | 8–18 kHz |
| Operating Temperature Range | −50 °C to +400 °C (HT variants) |
| Connector Options | Integrated hardwired cable, 2-pin 7/16 UNF, MIL-C-5015, or %-28 UNF |
| Mounting | Through-hole |
| Compliance | Designed for industrial vibration monitoring per ISO 5347, IEEE 1451.4 (TEDS-ready variants), and compatible with standard IEPE signal conditioners |
| Brand | DJB |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | A/131/V |
| Price | Upon Request |
| Sensitivity | 10 mV/g or 100 mV/g |
| Weight | 19 g |
| Maximum Shock Range | ±1000 g |
| Resonant Frequency | ≥25 kHz (X/Y), ≥28 kHz (Z) |
| Operating Temperature | −50 °C to +125 °C (High-Temp Version: ±10% sensitivity shift at +185 °C) |
| Connector | Microdot (M) |
| Mounting | Through-hole or adhesive (isolated base) |
| Electrical Output | IEPE (Integrated Electronics Piezoelectric), Constant Current Powered (2–20 mA) |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported Instrument |
| Model | FM-120 |
| Measurement Range | 2–50 µm |
| Sampling Area | 0.24 mm² |
| Volumetric Flow Rate | 1 m³/min |
| Sampling Frequency | Adjustable from 0.04 s to 20 s |
| Refractive Index Assumption | 1.33 (non-absorbing, water standard) |
| Scattering Collection Angle | 3.5°–12° (annular forward cone) |
| Operating Temperature | 0–40 °C |
| Relative Humidity | 0–100 % RH (non-condensing) |
| Altitude Limit | ≤ 4,000 m |
| Instrument Weight | 10.0 kg |
| External Pump Weight | 9.5 kg |
| Dimensions (Detector Unit) | 23 cm (W) × 37 cm (L) × 28 cm (H) |
| Power Supply | FM-120 unit: 85–264 VAC, 50–60 Hz |
| External pump | 220 VAC |
| Data Interface | RS-422 or RS-232 |
| Brand | AccuStar® II |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | DAS30 |
| Price | Upon Request |
| Measurement Principle | Capacitive Transduction |
| Output Type | Linear Variable Capacitance |
| Mounting | PCB-mountable |
| Housing Structure | Patented Arch Design |
| Operating Temperature Range | −40 °C to +85 °C |
| Storage Temperature Range | −55 °C to +85 °C |
| Full Scale Range | ±30° |
| Linearity Error | ±20 arc-min (±0.33°) over full scale |
| Sensitivity (Gain) | 0.27% per degree ±0.007% |
| Zero Offset Drift | ±0.025°/°C |
| Zero Offset at 25 °C | ±18 arc-seconds |
| Temperature Coefficient of Sensitivity | −0.10%/°C ±0.15% |
| Bandwidth | <3 kHz |
| Nominal Capacitance | Cs ≈ 50 pF |
| Output Monotonicity | Strictly monotonic |
| Environmental Robustness | IP67-rated enclosure (per IEC 60529), shock resistance up to 500 g (half-sine, 1 ms), vibration tolerance 20 g RMS (10–2000 Hz) |
| Brand | Dukin |
|---|---|
| Origin | South Korea |
| Model | GIANT |
| Structure | Cantilever (Horizontal Arm) |
| Base Material | Granite |
| Bearing Type | Air-bearing (High-Rigidity) |
| Thermal Compensation | Integrated Real-Time Temperature Compensation System |
| Compliance | Designed for ISO 10360-2 & ASME B89.4.1-2019 geometric accuracy verification |
| Brand | Dukin |
|---|---|
| Origin | South Korea |
| Model | SIGMA 564 |
| Structure | Dual-Column Bridge |
| Base Material | Granite |
| Bearing Type | Air-bearing |
| Application Scope | Small-to-Medium-Sized Precision Components |
| Compliance Context | ISO 10360, VDI/VDE 2617, ASME B89.4.10 |
| Brand | Duling |
|---|---|
| Origin | Anhui, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | C1-AGP-10 |
| Instrument Type | Multi-Channel |
| External Dimensions | 8.8 × 2.6 × 6.8 cm |
| Temperature Range | −196 °C to +100 °C |
| Temperature Accuracy | ±0.5 °C |
| Sampling Interval | 1–10 minutes per reading |
| Sensor Interface | 1 x External Temperature & Humidity Probe (RS485/Modbus or analog optional) |
| Communication | Embedded LTE-M/NB-IoT or Wi-Fi (configurable) |
| Display | Integrated OLED screen for real-time local readout |
| Brand | Duling |
|---|---|
| Origin | Anhui, China |
| Model | C1-AGS-10(4G) |
| Dimensions | 8.8 × 2.6 × 6.8 cm |
| Temperature Range | −40 °C to +100 °C |
| Temp. Accuracy | ±0.5 °C |
| Humidity Range | 0–100 %RH |
| RH Accuracy | ±2 %RH |
| Logging Interval | 1–10 min |
| Channel Count | Multi-Channel (1 external温湿度 sensor input) |
| Connectivity | Embedded 4G LTE module for cloud transmission |
| Brand | Duling |
|---|---|
| Origin | Anhui, China |
| Model | C1-C0P-10 |
| Channel Count | Multi-Channel |
| Dimensions | 8.8 × 2.6 × 6.8 cm |
| Temperature Range | −196 °C to +100 °C |
| Accuracy | ±0.1 °C (−50 °C to +50 °C) |
| Sampling Interval | 1–10 min |
| Wireless Transmission Distance | 2300 m (line-of-sight) |
| Penetration Capability | Two-story reinforced concrete structure |
| Sensor Interface | Single external temperature sensor port |
| Brand | Duling |
|---|---|
| Origin | Anhui, China |
| Model | C2-AGS-11 |
| Instrument Type | Multi-Channel Data Logger |
| Temperature Range | -40°C to +65°C |
| Humidity Range | 0–99% RH |
| Temp. Accuracy | ±0.5°C |
| RH Accuracy | ±5% RH |
| Internal Sensor | SHT30 |
| External Probe Support | NTC |
| Logging Interval | 2 s – 24 h (adjustable) |
| Memory Capacity | ≥60,000 records |
| Display | 1.3″ OLED (128×64 px) |
| Power | 5000 mAh Li-Polymer battery |
| Connectivity | USB Mass Storage (offline), Virtual COM Port (online), Nano-SIM (China Mobile/Unicom), LBS-based positioning (≤300 m typical accuracy) |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | ABS Series for Aeration Monitoring |
| Pricing | Available Upon Request |
| Origin | USA |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Imported |
| Model | Dynaflow ABS |
| Price Range | USD 14,000 – 70,000 |
| Brand | Dynamax |
|---|---|
| Origin | USA |
| Model | SapIP-IRT |
| Field of Application | Non-contact plant canopy surface temperature measurement for irrigation scheduling and physiological stress monitoring |
| Viewing Angle | 20° |
| Measurement Accuracy | ±0.5°C (ambient temperature range 0–50°C) |
| Operating Temperature | 0–50°C |
| Power Supply | Rechargeable battery with optional 2 W solar panel |
| Output Options | Analog (0–5 V or 4–20 mA), SDI-12, or wireless (SapIP mesh protocol) |
| Data Logging | Configurable interval from 10 s to 60 min |
| Network Topology | Self-organizing wireless mesh (SapIP) supporting up to 200 sensor nodes per network |
| Transmission Range | Up to 1.6 km radius (line-of-sight, terrain-dependent) |
| Compliance | CE, FCC Part 15, RoHS |
| Software Integration | Watcher™ desktop application (Windows), cloud-based data dashboard (HTTPS/TLS encrypted) |
| Brand | Edmund Optics |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | 114 |
| Price | Upon Request |
| Wavelength Range | 300–1100 nm (400–1100 nm with LDFP) |
| Sensor Format | 2/3″ CMOS, 1280 × 1024 pixels, 6.7 µm pixel pitch |
| Active Area | 8.5 × 6.8 mm |
| Minimum / Maximum Beam Diameter (1/e²) | 0.20 mm / 6.0 mm |
| Beam Position Accuracy | ±1% typical, ±5% max |
| Trigger Input | TTL, rising or falling edge |
| Frame Rate | 27 Hz (Live Mode), 10 Hz (with real-time calculations) |
| Peak Noise Floor | 24 nW/cm² at 632.8 nm |
| CW Saturation Power Density | 40 mW/cm² at 632.8 nm (with LDFP) |
| Pulsed Saturation Energy Density | 8 mJ/cm² at 1.06 µm (without LDFP) |
| Damage Threshold | 32 mJ/cm² at 1.06 µm (without LDFP) |
| Shutter | Fixed 10 ms |
| Lens Mount | C-Mount |
| SNR | >60 dB |
| Gamma | 1.0 |
| Gain | Optimized linear dynamic range (non-adjustable) |
| OS Compatibility | Windows 98, NT 4.0, 2000, XP |
| Dimensions (with LDFP) | 68.1 × 79.3 × 40.9 mm |
| Weight | 110 g |
| Operating Temperature | −20 to +60 °C |
| Brand | Edwards Vacuum |
|---|---|
| Origin | United Kingdom |
| Model | APG 200 |
| Measurement Principle | Pirani Thermal Conductivity |
| Pressure Range | 1 × 10⁻⁴ to 1 × 10⁴ mbar |
| Vacuum Interface | KF 16 (ISO-KF) |
| Compliance | CE, RoHS, UKCA |
| Brand | AMAE |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | EE-25 |
| Price Range | USD 2,100 – 3,500 (FOB) |
| Flow Measurement Principle | Positive Displacement (Rotary Piston Type) |
| Flow Range | 5–2010 mL/min |
| Accuracy Class | Class 1 per ISO 4064-2:2014 & JJG 577–2012 |
| Output Interface | RS-232/RS-485, USB, Ethernet |
| Compliance | Meets requirements for verification of gas sampling pumps per EPA Method TO-11A, ISO 12039, and EN 13649 |
| Brand | AMAE |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | EE-35 |
| Price Range | USD 2,100 – 3,500 (FOB) |
| Flow Measurement Principle | Positive Displacement (Rotary Piston Type) |
| Flow Range | 1–35 L/min |
| Accuracy Class | Class 1 per ISO 4064-2:2014 & JJG 577-2012 |
| Interface | RS-485 / USB-C |
| Connectivity | Integrated with AMAE-DESK Calibration Management Platform |
| Compliance | Meets requirements for verification of gas samplers per EPA Method TO-11A, ISO 10780, and GB/T 32205–2015 |
| Brand | Eigenbrodt |
|---|---|
| Origin | Germany |
| Model | LTS 2000 |
| Sensor Type | Pt-100 (DIN EN 60751 / IEC 60751) |
| Measurement Range | −40 °C to +50 °C |
| Operating Temperature | −30 °C to +40 °C |
| Accuracy | ±0.2 K at 0 °C |
| Total Error | ±(0.3 °C + 0.005 × t °C), where t = absolute temperature in °C |
| Response Time (at 1 m/s airflow) | ≈25 s |
| Resistance Output | ≈80–120 Ω |
| Time Constant | <1 min |
| Resolution | <0.1 K |
| Tolerance Class | 1/3 Class B |
| Mounting Height | 5 cm above ground level |
| Compatible Enclosure | LAM 630 radiation shield |
| Brand | Eijkelkamp |
|---|---|
| Model | DIVER (DI601/DI602/DI605/DI610, CTD-Diver, Micro-Diver) |
| Type | Submersible Pressure-Based Water Level Sensor |
| Measurement Parameters | Water Level (Depth), Temperature (±0.1 °C), Optional Conductivity (CTD-Diver: 0–80 mS/cm, ±1% FS) |
| Depth Ranges | 10 m / 20 m / 30 m / 50 m / 100 m (model-dependent) |
| Resolution | 0.2–2 cm (level), 0.01 °C (temperature), 0.1% FS (conductivity) |
| Accuracy | ±0.05–0.1% FS (level), ±0.1 °C (temperature), ±1% FS (conductivity) |
| Operating Temperature | −20 to +80 °C |
| Housing Material | RVS 316L stainless steel (Micro-/DIVER) or Zirconia ceramic (CTD-Diver) |
| Pressure Sensor Element | Alumina ceramic |
| Dimensions | Ø18 mm × 90 mm (Micro-/DIVER) |
| Weight | 60 g (Micro-/DIVER) |
| Memory Capacity | 2 × 48,000 readings (Micro-/DIVER) |
| Sampling Interval | 0.5 s to 99 h (adjustable) |
| Battery Life | 8–10 years (typical, at 15-min interval) |
| Temperature Compensation Range | −10 to +40 °C (for pressure sensor) |
| Atmospheric Compensation | Compatible with Baro-Diver for barometric correction |
| Compliance | Designed for long-term unattended deployment in compliance with ISO 14688-1 (soil description), ASTM D4043 (groundwater monitoring), and GLP-aligned data integrity practices |
| Origin | Japan |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Imported |
| Model | EJ Series |
| Pricing | Upon Request |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Elcometer 118 |
| Pricing | Available Upon Request |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Elcometer 7420 |
| Pricing | Upon Request |
| Brand | Electrophysics |
|---|---|
| Origin | Belarus |
| Model | Abris-M Version 2 |
| Spectral Range | 350–2000 nm (UV/IR) |
| Resolution (center wavelength) | 60 lp/mm |
| Field of View | 18° |
| Magnification | 2× |
| Objective Lens | F2/50 mm with adjustable iris |
| Focus Range | 0.25 m to ∞ |
| Working Distance | 12.5 ± 0.2 mm |
| Battery | 1.5 V AAA (3 V internal HV conversion) |
| HV Output | 16–18 kV |
| Phosphor Emission | ~550 nm (green) |
| Screen Non-Uniformity | <20% |
| Response Non-Uniformity | <15% |
| Image Distortion | <18% |
| Battery Life | ~35 h |
| Weight | 0.55 kg |
| Dimensions | 205 × 78 × 52 mm |
| Operating Temperature | −10 °C to +40 °C |
| Mounting Thread | 1/4″-20 UNC |
| Compliance | CE, RoHS, IEC 61010-1 (safety), ISO 9001-manufactured supply chain |
| Brand | Ellab |
|---|---|
| Origin | Denmark |
| Model | TrackSense Pro Compact |
| Temperature Range | –90 °C to +140 °C |
| Channel Type | Multi-Channel |
| Sensor Integration | Integrated Pt1000 RTD |
| Battery Life | Up to 30 days (typical, dependent on logging interval) |
| Pressure Measurement | Optional integrated pressure sensor |
| Compliance | FDA 21 CFR Part 11, ISO 13485, EU GMP Annex 15, ASTM E2810, USP <1059> |
| Brand | Elveflow |
|---|---|
| Origin | France |
| Model | MPS |
| Accuracy | ±0.2 % FS |
| Pressure Ranges | 70–7,000 mbar (5 selectable full-scale options) |
| Internal Volume | 7 µL |
| Response Time (Stabilization) | 20 ms |
| Media Compatibility | Liquids and Gases |
| Connection | Compatible with 3/32" ID tubing or 10-32 threaded fitting for 1/16" OD tubing |
| Type | Gauge Pressure Sensor (relative to ambient atmospheric pressure) |
| Brand | Axetris |
|---|---|
| Origin | Switzerland |
| Model | EMIRS50 |
| Housing | TO-46 metal can |
| Emissivity | >0.95 (2–14 µm) |
| Spectral Range | 2–14 µm |
| Modulation Speed | DC to >100 Hz |
| Power Consumption | <120 mW (typ.) |
| Window Options | Sapphire or Barium Fluoride (BaF₂) |
| Operating Temperature | -40 °C to +85 °C |
| Lifetime | >50,000 hours (at rated power) |
| Brand | Beijing BoLun JingWei Tech Dev Co., Ltd. |
|---|---|
| Origin | Japan |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | MIJ-NLTP |
| Price | USD 1.00 (Reference Only) |
| Measurement Range | -30 °C to 1100 °C |
|---|---|
| Accuracy | ±0.5 °C |
| Resolution | 1 °C |
| Repeatability | ±1 °C |
| Spectral Band | 8–14 µm |
| Optical Field of View | Standard 2° or 15°, optional 60° |
| Emissivity Adjustment | 0.2–0.98 (user-selectable via rear panel) |
| Response Time | 0.1 s |
| Operating Ambient Temperature | -10 °C to 50 °C, ≤99% RH (non-condensing) |
| Storage Temperature | -10 °C to 50 °C |
| Lens Material | Dual-coated zinc selenide (ZnSe), MIL-C-13508 compliant |
| Output Signal | RS-232C standard, optional 1 mV/°C analog output |
| Power Supply | Rechargeable NiCd battery, 40 h continuous operation |
| Battery Charger | 120 V/60 Hz/3 W or 230 V/50 Hz optional |
| Minimum Measurement Distance | 2 cm |
| Maximum Measurement Distance | 300 m |
| Housing | Stainless steel |
| Origin | Imported |
| Manufacturer Type | Distributor |