Measurement Instruments
Filter
Showing 1021–1050 of 2728 results
| Origin | Switzerland |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | CDG100D |
| Pricing | Upon Request |
| Axis Count | 1 (X or Y) |
|---|---|
| Output Type | Analog Voltage (Differential, ±10 V Full Scale) |
| Measurement Range | ±110 °/s |
| Bandwidth | 300 Hz |
| Bias Stability (25°C, 10° averaging) | <0.1 °/hr |
| Bias Stability (Full Temperature Range −40°C to +85°C, 10° averaging) | <10 °/hr |
| Bias Repeatability (Power-On) | 0.5 °/hr |
| Angle Random Walk (ARW) | <0.008 °/√hr |
| Output Noise (0.1–100 Hz, RMS) | <0.008 °/s |
| Scale Factor Error (Full Temp Range) | <2500 ppm |
| Scale Factor Linearity | <500 ppm |
| Startup Time | <1 s |
| Bias Offset | <8 mrad |
| Temperature Compensation | Yes (Bias & Scale Factor) |
| Input Voltage | +12 to +36 VDC (MIL-STD-461/1275 compliant) |
| Power Consumption | <1.7 W |
| Operating Temperature | −40°C to +85°C |
| Vibration (Operational) | 12 g RMS, 1–2000 Hz, 10 min/axis |
| Vibration (Shipping) | 3 g RMS, 1–2000 Hz, 1 h/axis |
| Shock | 500 g, 0.5 ms half-sine |
| MTBF (MIL-HDBK-217F) | 500,000 hr |
| EMI Immunity | Unshielded operation validated |
| Lifetime | ≥17 years |
| Weight (Sensor Element) | 71 g |
| Weight (Damping Assembly) | 26 g |
| Weight (Electronics & Connector) | 73 g |
| Dimensions (Sensor Element) | 25 mm H × 29.4 mm D |
| Built-in Self-Test (BIST) | Yes |
| Origin | Germany |
| Compliance | MIL-STD-810G, MIL-STD-461F, MIL-STD-1275E |
| Brand | INNALABS |
|---|---|
| Origin | Germany |
| Model | INL-CVG-G100 |
| Output Interface | RS-232/RS-422/RS-485 |
| Output Data Rate | 2000–9000 Hz |
| Measurement Range | ±110 deg/s |
| Bandwidth | 300 Hz |
| Bias Stability (Room Temp, 1σ) | <0.1 deg/hr |
| Bias Stability (Full Temp Range, 1σ) | <10 deg/hr |
| Angle Random Walk | <0.008 deg/√hr |
| In-Run Noise (0.1–100 Hz, RMS) | <0.008 deg/s |
| Scale Factor Error (Full Temp Range, 1σ) | <2500 ppm |
| Scale Factor Linearity | <500 ppm |
| Startup Time | <1 s |
| Misalignment | <8 mrad |
| Input Voltage | +12 to +36 VDC (MIL-STD-704 / MIL-STD-1275 compliant) |
| Power Consumption | <1.7 W @ 15 VDC |
| Operating Temperature | −40 °C to +85 °C |
| Storage Temperature | −55 °C to +90 °C |
| Vibration (Operational) | 12 g RMS, 1–2000 Hz, 10 min/axis |
| Vibration (Transport) | 3 g RMS, 1–2000 Hz, 1 h/axis |
| Shock | 500 g, 0.5 ms half-sine |
| MTBF (MIL-HDBK-217F) | 500,000 hr |
| EMI Susceptibility | Unshielded (no shielding required per design) |
| Lifetime | 17 years |
| Sensor Mass | 71 g |
| Damping Assembly Mass | 26 g |
| Electronics & Connector Mass | 73 g |
| Dimensions (Sensor Core) | 25 mm H × 29.4 mm D |
| Built-in Self-Test (BIT) | Yes |
| Brand | INNALABS |
|---|---|
| Origin | Germany |
| Model | GU100 (Digital Output) |
| Axis Count | 1 (X or Y) |
| Output Interface | RS-232/422/485 |
| Output Data Rate | 2000–9000 Hz |
| Measurement Range | ±110 deg/s |
| Bandwidth | 300 Hz |
| Bias Stability (RT, 1σ) | <0.1 deg/hr |
| Bias Stability (Full Temp Range, 1σ) | <10 deg/hr |
| Bias Repeatability (Power-On, 1σ) | 0.5 deg/hr |
| Angle Random Walk (ARW) | <0.008 deg/√h |
| Noise Density (0.1–100 Hz, RMS) | <0.008 deg/s |
| Scale Factor Error (Full Temp, 1σ) | <2500 ppm |
| Scale Factor Linearity | <500 ppm |
| Startup Time | <1 s |
| Input Voltage | +12 to +36 VDC (MIL-STD-461/1275 compliant) |
| Power Consumption | <1.7 W @ 15 VDC |
| Operating Temperature | −40 °C to +85 °C |
| Storage Temperature | −55 °C to +90 °C |
| Vibration (Operational) | 12 g RMS, 1–2000 Hz, 10 min/axis |
| Vibration (Transport) | 3 g RMS, 1–2000 Hz, 1 h/axis |
| Shock | 500 g, 0.5 ms half-sine |
| MTBF (MIL-HDBK-217F) | 500,000 hr |
| EMI/EMC | MIL-STD-461E compliant |
| Lifetime | 17 years |
| Weight | 0.9 kg |
| Dimensions | 107 mm × 107 mm × 68 mm (L × W × H) |
| Built-in Self-Test (BIT) | Yes |
| Temperature Compensation | Yes (Bias & Scale Factor) |
| Brand | INNALABS |
|---|---|
| Origin | Germany |
| Model | INN-202 |
| Input Range | ±50 g |
| Bias Stability (1 yr) | <350 µg |
| Temperature Sensitivity (Bias) | <50 µg/°C |
| Scale Factor | 1.0–1.4 mA/g |
| Scale Factor Stability (1 yr) | <390 ppm |
| Scale Factor Tempco | <180 ppm/°C |
| Misalignment | <2000 µrad |
| Misalignment Stability (1 yr) | <100 µrad |
| Nonlinearity | <50 µg/g² |
| Operating Temperature | −55 °C to +85 °C |
| Vibration Resistance | 8 g RMS, 20–2000 Hz |
| Shock Rating | 70 g, 11 ms |
| Bandwidth | 800 Hz |
| Resolution | 1 µg |
| Power Supply | ±15 VDC ±10% |
| Current Consumption | <16 mA |
| Power Dissipation | <480 mW |
| Dimensions | Φ38.1 × 26 mm |
| Weight | <80 g |
| Housing Material | Stainless Steel |
| Output | Analog (Current Mode) |
| Built-in Bias & Scale Factor Temperature Compensation Models | Yes |
| Connector | 10-pin circular, hermetically sealed |
| Brand | INNOTEG |
|---|---|
| Origin | Guangdong, China |
| Model | IA/IAm |
| Instrument Type | Analytical Balance |
| Maximum Capacity | 6.1 g (IAm) / 219 g (IA) |
| Readability | 1 µg (IAm) / 0.01 mg (IA) |
| Repeatability | 0.001 mg (IAm-1 µg) / 0.015 mg (IA-0.01 mg) |
| Calibration | Internal Automatic Calibration |
| Minimum Weight Detection | 1.8 mg (IAm) / 20 mg (IA) |
| Linearity Error | ±0.01 mg (IAm) / ±0.015 mg (IA) |
| Stabilization Time | ~8 s (IAm) / ~6 s (IA) |
| Display | Color TFT Touchscreen (IA-C/IAm-C) or Monochrome LCD (IA/IAm standard) |
| Electrostatic Neutralization | DC Ionizer (Standard on IAm-J/IA-J) |
| Weighing Pan Diameter | Φ25 mm (IAm) / Φ85 mm (IA) |
| Dimensions (Display Unit) | 181 × 137 × 72 mm |
| Dimensions (Weighing Unit) | 172 × 304 × 203 mm (IAm) / 172 × 304 × 283 mm (IA) |
| Compliance | USP <41>, GLP/GMP/GCP Data Integrity, ISO/IEC 17025 Traceable Operation |
| Brand | INNOTEG |
|---|---|
| Origin | Guangdong, China |
| Model | IB |
| Instrument Type | Analytical Balance |
| Capacity | 320 g |
| Readability | 0.1 mg |
| Repeatability | 0.1 mg |
| Internal Calibration | Automatic |
| Minimum Weight Determination | Auto-APA Function |
| Environmental Auto-Calibration | Yes |
| Static Elimination | Built-in High-Speed Electrostatic Neutralizer (IB-J models) |
| Connectivity | Dual RS-232C & USB |
| Compliance Support | GLP/GMP/GCP/ISO Report Formats |
| Data Storage | 200 measurement records, 50 calibration logs, 50 unit mass profiles |
| Optional | Density Kit, Below-Balance Hook, Rechargeable Battery, Control Output Modules |
| Brand | INNOTEG |
|---|---|
| Origin | Imported |
| Manufacturer Type | Direct Manufacturer |
| Model | IB / IBE |
| Instrument Type | Analytical Balance |
| Capacity | 122 g / 220 g / 320 g |
| Readability | 0.1 mg |
| Repeatability | 0.1 mg |
| Minimum Weight (USP) | 120 mg / 3.0 mg / 5.0 mg |
| Linearity Error | ±0.2 mg / ±0.2 mg / ±0.3 mg |
| Stabilization Time | ~1.5 s (IB), ~2.0 s (IBE) |
| Calibration | Internal Automatic Calibration (IB) / External Calibration (IBE) |
| Pan Diameter | Ø90 mm |
| Dimensions (W×D×H) | 258 × 357 × 331 mm |
| Interface | Dual RS-232C + USB |
| Compliance | GLP/GMP/GCP/ISO-compliant data output |
| Optional | Density kit, below-balance weighing hook, rechargeable battery, control I/O modules |
| Brand | INNOTEG |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | IM/IMm |
| Instrument Type | Analytical Microbalance |
| Maximum Capacity | 5.1 g |
| Readability | 1 µg |
| Repeatability | 0.0012 mg |
| Calibration | Internal Motorized Auto-Calibration |
| Communication Interfaces | RS-232C & USB |
| Display | High-Contrast White Backlit LCD |
| Compliance | GLP/GMP/GCP/ISO Data Output Format |
| Software | WinCT Metrology Application Suite |
| Anti-Static System | DC Ionizer + Conductive Coated Draft Shield |
| Weighing Pan | Perforated Stainless Steel (SUS316), Ø25 mm |
| Stabilization Time | ~8 s |
| Minimum Weight | 2.0 mg (per USP <41>) |
| Brand | Insvision |
|---|---|
| Model | AlphaAutoScan-400 |
| Origin | Zhejiang, China |
| Category | Precision Geometric Measurement Instrument / Industrial 3D Scanner |
| Weight | ~30% of predecessor |
| Footprint | Reduced by 60% |
| Installation & Commissioning | ≤2 days |
| Throughput | >2× baseline |
| Modular Architecture | Functional, field-deployable |
| Environmental Tolerance | Ambient light- and temperature-insensitive operation |
| Interface Standard | Industrial I/O (digital I/O, Ethernet/IP, Profinet-ready) |
| Compliance | Designed for ISO 10360-8 (CMM-based 3D scanning), ISO 17025 traceability support |
| Brand | Insvision |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | AlphaScan |
| Instrument Category | Laser-Based 3D Scanner |
| Measurement Speed | 5.4 million points/sec |
| Scan Accuracy | ±0.02 mm |
| Point Resolution | 0.01 mm |
| Maximum Scan Volume | 650 mm × 550 mm |
| Operating System | Windows 10 or later |
| Device Weight | 1.07 kg |
| Brand | Insvision |
|---|---|
| Model | AlphaVista |
| Type | Handheld Blue-Laser Structured Light 3D Scanner |
| Measurement Principle | Dual-Camera Photogrammetry-Assisted Triangulation with 50-Beam Blue Laser Stripe Projection |
| Max Scan Area | 2200 mm × 2200 mm |
| Point Cloud Acquisition Rate | 4,500,000 pts/sec |
| Volumetric Accuracy | 0.1 mm ± 0.015 mm/m |
| Single-Frame Accuracy | 0.073 mm |
| Minimum Feature Resolution | 0.5 mm |
| Operating System Compatibility | Windows 10 (64-bit) |
| Weight | 1.38 kg |
| Integrated Photogrammetry Module | Yes |
| Laser Class | Class II (IEC 60825-1) |
| Brand | Insvision |
|---|---|
| Model | X-Track |
| Origin | Zhejiang, China |
| Type | Metrological Laser Tracker |
| Max Measurement Range | 10–8000 mm |
| Resolution | 0.01 mm |
| Accuracy | ±0.025 mm |
| Pricing | USD $32,500 (FOB Zhejiang) |
| Brand | ISCO |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | ISCO 2150 |
| Price | Upon Request |
| Measurement Principle | Continuous-Wave Doppler Ultrasonics + Velocity-Area Method |
| Minimum Measurable Depth | 25 mm |
| Enclosure Rating | NEMA 4X/6P, IP68 |
| Operating Temperature | −40 °C to +60 °C |
| Power Supply | 12 VDC (7.0–16.6 VDC) |
| Typical Operating Current | 100 mA |
| Standby Current | 1 mA |
| Dimensions (H×W×D) | 7.4 cm × 28.7 cm × 19.1 cm |
| Weight | 0.9 kg |
| Housing Material | Impact-resistant polystyrene & stainless steel |
| Battery Life (15-min logging) | 15 months (Energizer® 529 alkaline) |
| Data Storage | Non-volatile flash memory |
| Communication | RS-232, 38,400 bps |
| Probe Calibration | Factory-calibrated at 120 points across 3 m depth range and multiple temperatures |
| Pressure Compensation | Integrated vented piezoresistive sensor |
| Probe Sealing | Epoxy-potted transducer with hydrophobic membrane & desiccant tube |
| Brand | ISCO |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | LaserFlow |
| Pricing | Upon Request |
| Brand | ISOTECH |
|---|---|
| Origin | United Kingdom |
| Model | 525Isis |
| Temperature Range | −100 °C to +40 °C |
| Cooling Time (to −100 °C from ambient) | 90 min |
| Stability at 0 °C | ±0.03 °C (30 min) |
| Stability at 90 °C | ±0.02 °C (30 min) |
| Radial Uniformity | 0.01 °C |
| Axial Gradient | 0.1 °C at 0 °C, 0.2 °C at −90 °C |
| Calibration Well Dimensions | Ø35 mm × 160 mm depth |
| Standard Insert | Six-hole sleeve set (9.5 mm, 8.0 mm, 6.4 mm, 6.4 mm, 4.5 mm, 4.5 mm) |
| Power Input | 200 W, 100–240 VAC, 50/60 Hz |
| Dimensions (H×W×D) | 215 × 420 × 640 mm |
| Weight | 22.7 kg |
| Brand | ISOTECH |
|---|---|
| Origin | USA |
| Model | E4520 & V4951 & C4953 |
| Temperature Range | −45 °C to 250 °C |
| Stability | ±0.01 °C (E4520/V4951), ±0.02 °C (C4953) |
| Temperature Resolution | 0.001 °C (E4520/V4951), 0.01 °C (C4953) |
| Heating Time | 15 min (−30 °C → 140 °C |
| Cooling Time | 15 min (140 °C → 0 °C), 25 min (250 °C → 30 °C) |
| Dimensions (D×W×H) | 312 mm × 212 mm × 384 mm |
| Calibration Well | Ø35 mm × 160 mm depth |
| Horizontal Uniformity (Dry-Block Mode) | <0.008 °C (E4520/V4951), <0.02 °C @ 250 °C (C4953) |
| Vertical Uniformity (Dry-Block Mode, 40 mm below top) | <0.040 °C (E4520/V4951), <0.25 °C (C4953) |
| Input Compatibility | Thermocouples (E/J/K/N/R/S/T), RTDs (Pt100/Pt1000), CJC Accuracy: ±0.35 °C |
| Interface | Ethernet + USB |
| Power | 220 VAC, 50/60 Hz, 150–300 W |
| Weight | 8–14 kg |
| Brand | ISOTECH |
|---|---|
| Origin | United Kingdom |
| Product Type | Portable Temperature Verification and Calibration System |
| Core Components | TTI-10 Dual-Channel Precision Thermometer & Fast Cal Series Dry-Block Calibrator |
| Measurement Accuracy | ±10 mK (±0.01 °C) |
| Resolution | 0.001 °C |
| Data Logging Capacity | Up to 4,000 points (min/max/avg) |
| Sampling Interval | 1 s to 30 min |
| Interface | USB 2.0 |
| Software Compatibility | ISOTECH Cal Notepad v3.x |
| Compliance | Designed for traceable calibration per ISO/IEC 17025 requirements |
| Portability | Handheld thermometer + lightweight dry-well (<4.5 kg typical) |
| Brand | ISOTECH |
|---|---|
| Origin | United Kingdom |
| Model | FC Series |
| Instrument Type | Dry-Block Temperature Calibrator |
| Temperature Ranges | −35°C to 140°C |
| Stability | ±0.02°C (FC140/FC350), ±0.03–0.05°C (FC650) |
| Display Accuracy | ±0.15°C (FC140), ±0.2°C (FC350), ±0.5°C (FC650) |
| Heating Time | 15 min (−30°C → 140°C), 20 min (50°C → 350°C), 20 min (50°C → 650°C) |
| Cooling Time | 15 min (140°C → 0°C), 40 min (350°C → 100°C), 20 min (650°C → 300°C) |
| Calibration Well Dimensions | Ø25 mm × 148 mm depth |
| Power Consumption | 150 W (FC140), 750 W (FC350/FC650) |
| Dimensions (D×W×H) | 228 mm × 248 mm × 143 mm |
| Weight | 6.60 kg (FC140), 6.35 kg (FC350/FC650) |
| Traceability | UKAS-accredited calibration certificate available |
| Optional Interfaces | 4–20 mA input, RS232/USB communication, PC software for automated calibration routines, temperature switch testing, ramp-and-soak profiling |
| Brand | ISOTECH |
|---|---|
| Origin | United Kingdom |
| Model | 993, 996 |
| Instrument Type | Blackbody Calibrator |
| Temperature Range | −10 °C to 550 °C |
| Stability | ≤ 0.1 °C |
| Temperature Resolution | 0.01 °C |
| Warm-up Time | 40 min (from ambient to 80 °C) |
| Cool-down Time | 45 min (from ambient to −10 °C) |
| Operating Ambient Temperature | −29 °C to 50 °C |
| Cavity Aperture | 50 mm (Model 993), 65 mm (Model 996) |
| Emissivity | > 0.995 |
| Temperature Uniformity | ≤ ±0.15 °C or ±0.15% of reading (whichever is greater) |
| Enclosure Rating | IP56 |
| Interface | RS-232 |
| Internal Cavity Dimensions | 355 mm × 279 mm × 406 mm |
| External Dimensions (D×W×H) | 355 mm × 279 mm × 406 mm |
| Mass | 18.1 kg |
| Compliance | MIL-PRF-28800F, BS EN 60068-2-1:2007, BS EN 60068-2-14:2009, ISO 3744:2010 |
| Brand | ISOTECH |
|---|---|
| Origin | United Kingdom |
| Model | 786 / 787 |
| Instrument Type | Dry-Block Temperature Calibrator |
| Environmental Operating Range | −29 °C to +50 °C |
| IP Rating | IP56 |
| Calibration Well Dimensions (Model 786) | Ø29.4 mm × 203 mm depth |
| Calibration Well Dimensions (Model 787) | Ø25.4 mm × 152 mm depth |
| Stability (Model 786, A-type sensor) | ±0.008 °C |
| Stability (Model 787, B/S-type sensor) | ±0.01 °C to ±0.05 °C |
| Horizontal Uniformity (Model 786) | <0.008 °C |
| Vertical Uniformity (Model 787) | <0.5 °C |
| Heating Time (786 | −40 °C → 140 °C): 30 min |
| Heating Time (787 | −50 °C → 650 °C): 30 min |
| Cooling Time (787 | 650 °C → 100 °C): 90 min |
| Power Supply (786) | 85–264 V AC, 50/60 Hz, 360 W |
| Power Supply (787) | 110/230 V AC, 50/60 Hz, 800 W |
| Weight (786) | 16.8 kg |
| Weight (787) | 18 kg |
| Compliance | MIL-PRF-28800F, BS EN 60068-2-1 & -2-14, ISO 3744:2010 |
| Brand | ISOTECH |
|---|---|
| Origin | United Kingdom |
| Model | ISOTECH Fixed-Point Blackbody Series (Indium, Zinc, Aluminum, Silver, Copper Points) |
| Cavity Diameter | 10 mm |
| Cavity Depth | 90 mm |
| Emissivity | >0.999 |
| Plateau Duration | >3 hours |
| Temperature Range | 156.60 °C (In) to 1084.62 °C (Cu) |
| High-Temperature Operation | Requires inert gas purge (N₂ or Ar) for Al/Ag/Cu points |
| R999 Mid-Temperature Reference Source | 30–550 °C, Cavity Ø45 mm × 285 mm depth |
| R426 High-Temperature Calibration Furnace | Sodium heat-pipe design, axial temperature gradient <0.01 °C/cm |
| Brand | ISOTECH |
|---|---|
| Origin | United Kingdom |
| Model Numbers | 17701, 17703, 465 |
| Application | High-Accuracy Temperature Fixed-Point Realization (In, Sn, Zn, Al) |
| Construction | Stainless Steel Core Tube with Parallel Wound Heating Element |
| Axial Temperature Gradient | <0.1 °C/cm in Working Zone |
| Plateau Duration | ≥20–40 h (dependent on cell type and thermal mass) |
| Control System | PID-Based Automatic Temperature Stabilization |
| Safety | Integrated Power-Fail Protection Circuitry |
| Compliance | Designed for use in accordance with ITS-90 realization protocols |
| Brand | ISOTECH |
|---|---|
| Origin | United Kingdom |
| Type | Sealed or Open-Style Fixed-Point Cell |
| Certified Uncertainty | ±0.000070 °C (k = 1) |
| Purity | ≥99.99999% Ga (7N) |
| Compliance | Traceable to NPL and CIPM MRA |
| Brand | ISOTECH |
|---|---|
| Origin | United Kingdom |
| Model | 17402B |
| Operating Duration | 12–16 h |
| Cooling Initiation | Bottom-up thermal control |
| Compliance | Designed for ITS-90 fixed-point calibration workflows |
| Regulatory Context | Supports GLP-compliant temperature calibration traceability |
| Brand | ISOTECH |
|---|---|
| Origin | United Kingdom |
| Model | Gemini4857-550/700 |
| Temperature Range | 35°C to 550°C / 50°C to 700°C |
| Stability | ±0.01°C @ 100°C, ±0.015°C @ 300°C, ±0.03°C @ 550°C |
| Temperature Resolution | 0.01°C |
| Heating Time (30°C → 550°C) | 35 min (standard), 60 min (LRIN) |
| (50°C → 700°C) | 110 min (standard), 120 min (LRIN) |
| Cooling Time (550°C → 275°C) | 35 min (standard), 132 min (LRIN) |
| (550°C → 60°C) | 345 min (standard), 420 min (LRIN) |
| Calibration Well Dimensions | Ø64 mm × 160 mm depth |
| External Dimensions (D×W×H) | 312 mm × 212 mm × 384 mm |
| Weight | 8.5 kg (standard), 14 kg (LRIN) |
| Brand | ISOTECH |
|---|---|
| Origin | United Kingdom |
| Model | H4936 and D4934 |
| Instrument Type | Dry-Block Temperature Calibrator |
| Temperature Range | –20 °C to 142 °C (H4936), 30 °C to 250 °C (D4934) |
| Stability (Liquid Bath & Dry-Block Modes) | ±0.005 °C |
| Temperature Resolution | 0.001 °C (full scale) |
| Heating Time | –20 °C to 140 °C in 40 min (H4936) |
| Cooling Time | 140 °C to 20 °C in 90 min (H4936) |
| Horizontal Uniformity (Bath Mode) | <0.009 °C (H4936), <0.007 °C (D4934) |
| Vertical Uniformity (40 mm zone, Bath Mode) | <0.011 °C (H4936), <0.013 °C (D4934) |
| Calibration Well Dimensions | Ø65 mm × 160 mm depth |
| Input Channels | Thermocouples (E/J/K/N/R/S/T), RTDs (Pt100/Pt1000), (4–20) mA process signals, switch inputs |
| CJC Accuracy | ±0.35 °C |
| Display Resolution | 0.01 °C (–19.99 °C to 99.99 °C), 0.1 °C elsewhere |
| Display Accuracy | ±0.15 °C |
| Power Supply | 220 VAC, 50/60 Hz, 200 W (H4936), 1000 W (D4934) |
| Dimensions (H×W×D) | 384 × 212 × 312 mm |
| Weight | 12 kg (H4936), 8 kg (D4934) |
| Brand | ISOTECH |
|---|---|
| Origin | United Kingdom |
| Model | ISOTower |
| Fixed-Point Options | Indium (156.5985 °C), Tin (231.928 °C), Zinc (419.527 °C), Aluminum (660.323 °C), Silver (961.78 °C) |
| Immersion Depth | 290 mm |
| Thermal Siphon Technology | Yes |
| Temperature Plateau Duration | ≥30 h |
| Ramp Time to Setpoint | ~2 h |
| Cell Purity | 99.9999% (6N) |
| Construction | Integrated crucible-furnace monoblock architecture |
| Compliance | Fully compatible with ITS-90 realization protocols |
| Brand | ISOTECH |
|---|---|
| Origin | USA |
| Model | Jupiter 4852 |
| Temperature Range | 35°C to 660°C |
| Stability | ±0.015°C @ 100°C, ±0.025°C @ 650°C |
| Temperature Resolution | 0.01°C (30–99.99°C), 0.1°C (other ranges) |
| Heating Time | <20 min (30°C to 650°C) |
| Cooling Time | <60 min (650°C to 150°C) |
| Calibration Well Dimensions | Ø35 mm × 148 mm depth |
| Well Insert Configuration | 6-hole standard block (2×Ø4.5 mm, 2×Ø6.4 mm, 1×Ø8.0 mm, 1×Ø9.5 mm |
| Display Units | °C, °F, K, %RH (via optional humidity module) |
| Input Channels | Dual sensor inputs + reference input |
| Thermocouple Support | E, J, K, N, R, S, T |
| RTD Support | Pt100, Pt1000 (2-/3-/4-wire) |
| Process Input | 4–20 mA (isolated) |
| CJC Accuracy | ±0.35°C |
| Power Supply | 220 VAC, 50/60 Hz, 1000 W |
| Dimensions (H×W×D) | 384 × 212 × 312 mm |
| Weight | 8.5 kg |
| Compliance | ASTM E2877, ISO/IEC 17025 (when used with accredited procedures), NIST-traceable calibration capability |
| Brand | ISOTECH |
|---|---|
| Origin | United Kingdom |
| Model | 461 |
| Power Requirement | None |
| Operating Medium | Liquid Nitrogen (LN₂) |
| Construction | Stainless Steel Dewar Vessel with Insulated Lid |
| Calibration Reference Temperature | −196 °C (77 K) |
| Temperature Uniformity | ±0.05 °C (within central 25 mm axial zone, after thermal stabilization) |
| Probe Compatibility | Standard 6–8 mm diameter stem thermometers (glass, platinum resistance, thermocouple, or digital sensors) |
| Compliance | Designed in accordance with ISO/IEC 17025:2017 requirements for reference standards used in thermometer calibration |