Measurement Instruments
Filter
Showing 2101–2130 of 2724 results
| Brand | Sinotest |
|---|---|
| Origin | Jilin, China |
| Manufacturer Type | Direct Manufacturer |
| Origin Classification | Domestic |
| Model | CLY Series Spoke-Type Tension & Compression Load Cell |
| Price Range | USD 420 – 690 |
| Rated Capacity Range | 5 kN to 3000 kN |
| Construction | Monolithic Steel Body |
| Height Profile | Low-Profile Design |
| Lateral Load Resistance | High |
| Sealing Rating | IP66 / IP68 |
| Output Configuration | 4-Wire Wheatstone Bridge |
| Brand | SINOTEST |
|---|---|
| Origin | Jilin, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Country of Origin | China |
| Model | CNY-81 |
| Torque Range | 50 N·m to 2000 kN·m |
| Accuracy Classes | ±0.02% FS, ±0.05% FS, ±0.1% FS |
| Output Sensitivity | 1.5–2.0 mV/V |
| Nonlinearity | ≤±0.03% FS / ≤±0.05% FS / ≤±0.1% FS |
| Hysteresis | ≤±0.03% FS / ≤±0.05% FS / ≤±0.1% FS |
| Repeatability | ≤±0.03% FS / ≤±0.05% FS / ≤±0.1% FS |
| Creep (30 min) | ≤±0.03% FS / ≤±0.05% FS / ≤±0.1% FS |
| Zero Temperature Effect | ≤±0.03% FS/°C / ≤±0.05% FS/°C |
| Output Temperature Effect | ≤±0.03% FS/°C / ≤±0.05% FS/°C |
| Safe Load Limit | 120% FS |
| Nominal Bridge Resistance | 350 Ω |
| Recommended Excitation Voltage | ≤12 V DC |
| Maximum Excitation Voltage | ≤15 V DC |
| Zero Balance | ≤±1.0% FS |
| Insulation Resistance | ≥500 MΩ |
| Brand | SKC |
|---|---|
| Origin | USA |
| Model | Chek-mate 375 Series |
| Flow Ranges | 5.0–30.0 L/min (High), 0.50–5.0 L/min (Medium), 20–500 mL/min (Low) |
| Accuracy | ±1% of reading within specified ranges, ±2.5% outside |
| Operating Temperature | 0–40 °C |
| Pressure Range | 700–1090 mbar |
| Altitude Limit | up to 3050 m |
| Power | 9 V alkaline battery (≈30 h operation, auto-shutdown after 15 min idle) |
| Weight | ~232–236 g |
| Origin | Imported |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Model | TMTI 2 |
| Pricing | Available Upon Request |
| Field of View | 20° × 15° |
| Detector Resolution | 160 × 120 uncooled microbolometer |
| Spectral Range | 8–14 µm |
| Thermal Sensitivity (NETD) | ≤0.15 °C at 25 °C |
| Temperature Range | −10 °C to +250 °C |
| Accuracy | ±2 °C or ±2% of reading (whichever is greater) |
| Minimum Focus Distance | 30 cm |
| Focus | Manual |
| Laser Targeting | Integrated Class II laser pointer for center-point indication |
| Display | 3.5″ LCD with LED backlight, 4 color palettes (Iron Red, Rainbow, Grayscale, High-Contrast) |
| Storage | Removable SD card (up to 1 GB), supports ≥1000 thermal images |
| Battery | Rechargeable Li-ion, 4 h continuous operation |
| Power Supply | 12 V AC adapter included |
| Interface | USB Type-B |
| Dimensions | 230 mm × 120 mm × 110 mm |
| Weight | 0.75 kg (with battery) |
| Housing | Shock-resistant engineering plastic |
| Emissivity Adjustment | 0.20–1.00 in 0.01 increments |
| Measurement Tools | Dual movable crosshairs, ΔT (delta-T) calculation |
| Mounting | Handheld or tripod-compatible (1/4″–20 UNC thread) |
| Operating Ambient | −15 °C to +45 °C, 10–90% RH non-condensing |
| Storage Ambient | −20 °C to +70 °C |
| Included Accessories | TMTI 2 imager, rechargeable battery, 12 V AC charger, 128 MB SD card, USB card reader + cable, lens dust cap, power connector, software CD (user manual + PC reporting suite), carrying strap, protective carry case |
| Brand | Smart Eye |
|---|---|
| Origin | Sweden |
| Model | Smart Eye Pro |
| Measurement Principle | Pupil-Corneal Reflection (PCCR) |
| Camera Support | 2–8 synchronized cameras |
| Subject Distance Range | 30–300 cm |
| Field of View | Up to 360° horizontal |
| Output Interfaces | TCP/IP, UDP, CAN (optional), ASCII text files |
| Compliance | CE, FCC, RoHS |
| Brand | CREAMFORM |
|---|---|
| Model | SmartFlash |
| Type | High-Precision Vision-Based Displacement & Dimensional Metrology Sensor |
| Origin | Guangdong, China |
| Construction | Full Aluminum Alloy Frame with Crossed-Roller Bearings and Linear Motor Drive |
| Optical System | Dual Telecentric Lenses with Distortion Correction Algorithm |
| Illumination | Multi-Angle + Low-Angle Custom LED Source |
| Image Processing | Sub-Pixel Edge Detection, Burr Filtering, Adaptive Contrast Enhancement |
| Automation | CAD-Driven Program Generation (No Coding Required), Auto-Focus, Automatic Feature Registration |
| Measurement Mode | Parallel Feature Extraction (≥100 Parts, ≥300 Features per Batch) |
| Data Output | Multi-Format Reports (PDF/Excel/CSV), PLC Integration (Modbus TCP, EtherNet/IP, PROFINET) |
| Compliance | Designed for ISO 10360-7 & VDI/VDE 2634 Part 2 Conformance Testing |
| Software | Proprietary Real-Time Metrology Suite with Audit Trail Logging (21 CFR Part 11 Ready) |
| Brand | SmartGas |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | C2H4 |
| Output Signals | 4–20 mA / 0–20 mA analog, 0–1 V / 0–2.5 V analog, RS-485 digital interface |
| Housing | Robust industrial enclosure |
| Connection | Flexible tubing interface |
| Technology | Non-dispersive infrared (NDIR) detection |
| Brand | SmartGas |
|---|---|
| Origin | Germany |
| Supplier Type | Authorized Distributor |
| Import Status | Imported |
| Model | Custom OEM/ODM Available |
| Pricing | Upon Request |
| Brand | SmartGas |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | H2 |
| Pricing | Available Upon Request |
| Detection Principle | Electrochemical (H₂-Specific) |
| Operating Temperature | -20°C to +80°C |
| Humidity Range | 5–95% RH (non-condensing) |
| H₂ Measurement Range | 0.2–4.0% vol in air |
| Supply Voltage | 12–24 VDC |
| Output Signal | 1–4.5 VDC (linear, 50 mA max load) |
| Fault Output | 0.0–0.75 VDC (low-fault) / 5.0 VDC (high-fault) |
| Power Consumption | 0.2–0.3 A |
| Response Time (T90) | ≤5 s |
| Recovery Time (T10) | ≤5 s |
| Cross-Sensitivity | Negligible to CO₂, CH₄, CO, and VOCs |
| Brand | SmartGas |
|---|---|
| Origin | Germany |
| Model | SM-CDT |
| Measurement Principle | Non-Dispersive Infrared (NDIR) |
| Detection Range | 0–5000 ppm CO₂ |
| Accuracy | ±2% of reading |
| Output Options | Modbus RTU (RS-485), 4–20 mA, 0–1 V / 0–2.5 V |
| Dual-Wavelength Compensation | Yes |
| Temperature Compensation | Integrated |
| Expected Service Life | ≥10 years |
| Power Supply | 12–24 VDC |
| Enclosure Rating | IP65 (for SMF/SMP variants) |
| Compliance | CE, RoHS, EMC Directive 2014/30/EU |
| Operating Temperature | –10 to +50 °C |
| Humidity Range | 0–95% RH (non-condensing) |
| Brand | SmartGas |
|---|---|
| Origin | Germany |
| Model | SM-R134A |
| Detection Principle | Non-Dispersive Infrared (NDIR) |
| Measurement Range | 0–2000 ppm |
| LOD | 2 ppm |
| Accuracy | ±2% of full scale (±40 ppm) |
| Resolution | 2 ppm |
| Repeatability | ±0.5% of reading |
| Output Options | 4–20 mA / 0–20 mA / 0–1 V / 0–2.5 V / RS485 (Modbus RTU) |
| Operating Temperature | -20 °C to +50 °C |
| Enclosure Rating | IP65 (SM/SMC variants) or IP67 (SMF/SMP variants) |
| Lifetime | ≥10 years |
| Cross-Sensitivity | Negligible to H₂O, CO₂, ethanol, and common background gases |
| Compensation | Dual-wavelength optical referencing with integrated temperature compensation |
| Brand | SmartGas |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | SO2F2 |
| Pricing | Available Upon Request |
| Brand | SmartGas |
|---|---|
| Origin | Germany |
| Model | SO2 |
| Type | NDIR Infrared Gas Sensor |
| Compliance | CE, RoHS, ATEX optional |
| Output Signal | 4–20 mA / 0–10 V / Modbus RTU (RS-485) |
| Operating Temperature | −20 °C to +50 °C |
| Enclosure Rating | IP65 |
| Response Time (T90) | < 30 s |
| Zero Drift | < 2 % FS/year |
| Span Drift | < 2 % FS/year |
| Cross-Sensitivity | < 1 % to CO₂, NO₂, H₂S, CH₄ |
| Brand | Solar Light |
|---|---|
| Origin | USA |
| Model | PMA2102 |
| Spectral Response | Matched to CIE Erythema Action Spectrum (ISO 17166:2019 / CIE S 007/E-1998) |
| Angular Response | ≤5% deviation from ideal cosine up to 60° |
| Measurement Range | 0–120 µW/cm² (0–1.2 W/m²), equivalent to 0–20 MED/hr |
| Resolution | 0.001 mW/cm² / 0.01 W/m² |
| Operating Temperature | −40 °C to +50 °C (−40 °F to +120 °F) |
| Temperature Coefficient | 1% / °C (numerically compensated via integrated thermistor and algorithm) |
| Diffuser | PTFE-based, Lambertian, effective field-of-view up to 50° |
| Cable Length | 15 m (50 ft) |
| Dimensions | Ø40.6 mm × H45.8 mm |
| Weight | 200 g |
| Calibration | NIST-traceable, erythemally weighted |
| Brand | Solar Light |
|---|---|
| Origin | USA |
| Model | PMA2104 |
| Spectral Response | Matches erythema action spectrum (CIE/ISO 17166:2019) |
| Angular Response | ≤15% deviation for incidence angles <50° |
| Measurement Range | 0–20 MED/hr (0–1.17 µW/cm²) |
| Resolution | 0.001 MED/hr |
| Operating Temperature | 0–50 °C (32–120 °F), non-condensing |
| Temperature Coefficient | ±1 %/°C (for solar UV irradiance) |
| Cable | 10.6 m (35 ft), waterproof, 7-pin keyed connector |
| Dimensions (w/o cable) | Ø139.7 mm × H88.9 mm |
| Weight (w/o cable) | 1360 g |
| Submersion Rating | IP68, rated to 100 m depth |
| Mounting | Two #10-32 threaded holes on base plate |
| Brand | Solar Light |
|---|---|
| Origin | USA |
| Model | PMA2106 |
| Angular Response | ≤5% deviation from ideal cosine (Lambertian) for incident angles <60° |
| Spectral Range | Non-weighted UVB (280–320 nm) |
| Measurement Range | 0.001–200 mW/cm² (0.01–2000 W/m²) |
| Resolution | 0.001 mW/cm² / 0.01 W/m² |
| Operating Temperature | 0–50 °C (32–120 °F), non-condensing |
| Temperature Coefficient | ±1 %/°C (for solar irradiance) |
| Cable | Retractable, 0.3–1.5 m |
| Dimensions | Ø40.6 mm × H45.8 mm |
| Weight | 200 g |
| Calibration | NIST-traceable |
| Brand | Solar Light |
|---|---|
| Origin | USA |
| Model | PMA2107 |
| Angular Response | ±5% deviation from ideal cosine response up to 60° incidence |
| Spectral Range | UVB (280–320 nm) + UVA (320–400 nm), non-weighted |
| Measurement Range | 0.001–200 mW/cm² (0.01–2,000 W/m²) |
| Display Resolution | 0.001 mW/cm² / 0.01 W/m² |
| Operating Temperature | 0–50 °C (32–120 °F), non-condensing |
| Temperature Coefficient | ±1 %/°C (for solar irradiance) |
| Cable | Retractable coaxial cable, 0.3–1.5 m |
| Detector Diameter | 40.6 mm |
| Height | 45.8 mm |
| Mass | 200 g |
| Calibration | NIST-traceable, factory-calibrated for broadband UVB+UVA irradiance |
| Brand | Solar Light |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | PMA2110 |
| Price | Upon Request |
| Spectral Range | 320–400 nm |
| Angular Response | ≤5% deviation from ideal cosine response up to ±60° |
| Measurement Range | 0.001–200 mW/cm² (0–2000 W/m²) |
| Display Resolution | 0.001 mW/cm² / 0.01 W/m² |
| Operating Temperature | 0–50 °C (32–120 °F), non-condensing |
| Temperature Coefficient | <0.1 %/°C |
| Cable | Retractable coaxial cable, 0.3–1.5 m |
| Detector Diameter | 40.6 mm |
| Height | 45.8 mm |
| Weight | 200 g |
| Calibration | NIST-traceable, radiometrically calibrated in W/m² and mW/cm² |
| Brand | Solar Light |
|---|---|
| Origin | USA |
| Model | PMA2111 |
| Spectral Range | 320–400 nm |
| Cosine Response Error | ≤5% for incidence angles <60° |
| Full-Scale Irradiance Range | 200 mW/cm² (2000 W/m²) |
| Resolution | 0.001 mW/cm² / 0.01 W/m² |
| Operating Temperature | −40 to +50 °C |
| Temperature Coefficient | <0.1 %/°C |
| Cable Length | 50 ft (15.2 m) |
| Diameter | 40.6 mm |
| Height | 45.8 mm |
| Weight | 200 g |
| Calibration | NIST-traceable |
| Brand | Solar Light |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | PMA2120 |
| Price | Upon Request |
| Spectral Response | Aligned with ACGIH UV Hazard Action Spectrum (Figure 1) |
| Angular Response | ±5% for incident angles <60° |
| Measurement Range | 0–1 mW/cm² |
| Display Resolution | 0.01 µW/cm² |
| Operating Temperature | 0–50 °C (32–120 °F), non-condensing |
| Cable Length | Retractable from 0.3 m to 1.5 m |
| Detector Diameter | 40.6 mm |
| Detector Height | 45.8 mm |
| Weight | 200 g |
| Dynamic Range | 2 × 10⁵ |
| Calibration | NIST-traceable |
| Cosine Correction | Yes |
| Units Displayed | µW/cm², mW/cm², J/cm² |
| Brand | Solar Light |
|---|---|
| Origin | USA |
| Model | PMA2121 |
| Spectral Response | Complies with ACGIH Blue Light Hazard Action Spectrum (Figure 1) |
| Angular Response | ±5% for incidence angles <60° |
| Measurement Range | 0.01 µW/cm² to 2,000 µW/cm² (low range) |
| Display Resolution | 0.01 µW/cm² / 0.1 mW/m² |
| Operating Temperature | 0–50 °C (32–120 °F), non-condensing |
| Cable | Retractable coaxial cable, 0.3 m (retracted) to 1.5 m (extended) |
| Detector Diameter | 40.6 mm |
| Height | 45.8 mm |
| Weight | 200 g |
| Calibration | NIST-traceable, cosine-corrected |
| Brand | Solar Light |
|---|---|
| Origin | USA |
| Model | PMA2122 |
| Spectral Response | 249–261 nm |
| Angular Response | ±5% up to 60° from normal |
| Measurement Range | 0.01–2000 µW/cm² (0.1–20,000 mW/m²) |
| Display Resolution | 0.01 µW/cm² / 0.1 mW/m² |
| Operating Temperature | 0–50 °C (non-condensing) |
| Temperature Coefficient | ±1 %/°C (for solar-weighted irradiance) |
| Cable | Retractable 0.3–1.5 m |
| Dimensions | Ø40.6 mm × H45.8 mm |
| Weight | 200 g |
| Calibration | NIST-traceable |
| Brand | Solar Light |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | PMA2133 |
| Price | Upon Request |
| Spectral Response | CIE Photopic Luminosity Function (400–700 nm) |
| Field of View | 8° |
| Measurement Range | 0–6,800 cd/m² (0–2,000 fL) |
| Display Resolution | 0.01 cd/m² or 0.01 fL |
| Operating Temperature | 0–50 °C (32–120 °F) |
| Cable Length | 1.5 m |
| Diameter | 40.6 mm |
| Height | 81.3 mm |
| Weight | 110 g |
| Calibration | NIST-traceable |
| Brand | Solar Light |
|---|---|
| Origin | USA |
| Model | PMA2135 |
| Spectral Response | CIE Photopic Luminous Efficiency Function (400–700 nm) |
| Angular Response | ≤5% deviation up to 60° from normal incidence |
| Detector Active Area | 0.474 in² (3.06 cm²) |
| Cosine Correction | PTFE-coated hemispherical diffuser |
| Calibration | NIST-traceable |
| Operating Temperature | −10 to +60 °C |
| Dimensions | Ø40.6 mm × 45.8 mm |
| Weight | 284 g |
| Cable Length | 0.9 m |
| Display Update Interval | Every 5 seconds on PMA2100 console |
| Units | Irradiance (mW/cm² or W/cm²), Dose (mJ/cm² or J/cm²) |
| Resolution | Full-scale range / 10⁴ for both irradiance and dose |
| Brand | Solar Light |
|---|---|
| Origin | USA |
| Model | PMA2140 |
| Spectral Range | 400–1100 nm |
| Cosine Response Error | ≤5% for incident angles <60° |
| Irradiance Range | 0–2000 W/m² |
| Display Resolution | 0.01 W/m² |
| Operating Temperature | 0 to +50 °C (non-condensing) |
| Cable Length | 0.3 m (standard), extendable to 1.5 m |
| Diameter | 40.6 mm |
| Height | 45.8 mm |
| Weight | 200 g |
| Calibration | NIST-traceable |
| Brand | Solar Light |
|---|---|
| Origin | USA |
| Model | PMA2143 |
| Spectral Response | 0.2–50 µm (unwindowed), 0.3–3 µm (with quartz window) |
| Field of View | 10° |
| Sensitivity | 20–40 µV/(W/m²) with window, 0.1 µV/µW on absorber, 1.10× higher without window |
| Max Irradiance | 2000 W/m² |
| Absorber Diameter | 12 mm |
| Response Time | 30 s |
| Operating Temperature | −40 to +80 °C |
| Nonlinearity | ≤3% (at 50 mV output) |
| Housing Diameter | 37.6 mm |
| Length (excl. connectors) | 101.6 mm |
| Weight (with 160 mm mounting rod) | 500 g |
| Cable Length | 5 m |
| Brand | Solar Light |
|---|---|
| Origin | USA |
| Model | PMA2145 |
| Spectral Range | 310–2800 nm (FWHM) |
| Full-Scale Range | 2000 W/m² / 200 mW/cm² |
| Response Time (95%) | 18 s |
| Annual Drift | <1% |
| Nonlinearity | <1.0% (at 1000 W/m²) |
| Temperature Dependence | <2% (−10 to +40 °C) |
| Cosine Error | ≤1% up to 70° zenith angle |
| Zero Offset | <15 W/m² under 200 W/m² thermal irradiance |
| Resolution | 1 W/m² / 0.1 mW/cm² |
| Operating Ambient | −40 to +80 °C |
| Cable Length | 9 m |
| Shaded Diameter | 60.3 mm |
| Unshaded Diameter | 78.11 mm |
| Height | 84.0 mm |
| Weight | 0.31 kg |
| Calibration | NIST-traceable, ISO 9060:2018 Class I compliant |
| Brand | Solar Light |
|---|---|
| Origin | USA |
| Model | PMA2160 |
| Sensor Compatibility | PMA2161, PMA2162, PMA2163, PMA2164 |
| Temperature Range (varies by probe) | −40 to +150°C |
| Accuracy | ±0.35°C (within 0–70°C) |
| Long-term Stability | <0.02°C/year |
| Self-heating Power | <100 µW |
| Resolution | 0.1°C / 0.1°F / 0.1 K |
| Output Units | °C, °F, K |
| Cable Length | 1.2 m (4 ft) |
| Calibration Method | Embedded Steinhart-Hart coefficients |
| Interface Connector | RJ12 |
| Memory | Onboard non-volatile memory storing probe-specific calibration data |
| Brand | Solartron Analytical |
|---|---|
| Origin | United Kingdom |
| Model | 1250 |
| Frequency Range | 10 µHz – 65 kHz |
| Signal Amplitude Range | 10 mV – 10.23 V (AC), up to 300 V (analysis input range) |
| Waveform Options | Sine, Square, Triangle |
| Amplitude Resolution | 1/1023 |
| Compliance | ASTM E2928, IEC 61000-4-30 (power quality), ISO/IEC 17025-accredited calibration support available |
| Brand | Solinst |
|---|---|
| Origin | Canada |
| Model | AquaVent |
| Type | Ventilated Pressure-Based Water Level Transducer |
| Accuracy | ±0.05% FS |
| Temperature Range | −20 °C to 80 °C |
| Temperature Accuracy | ±0.05 °C |
| Data Storage | 40,000 full-resolution readings (expandable to 120,000 linearly compressed records) |
| Battery Life | 8 years (at 1-min logging interval) |
| Clock Accuracy | ±1 minute/year |
| Measurement Interval | 1/8 second to 99 hours |
| Housing Dimensions | 22 mm × 178 mm |
| Pressure Units | m, cm, ft, psi, kPa, bar |
| Temperature Units | °C, °F |
| Communication Protocols | RS-232, RS-485, SDI-12 |
| Environmental Rating (Wellhead Interface) | IP64 |
| Operating Temperature (Cable & Electronics) | −20 °C to 80 °C |
| Venting Cable Length | Customizable up to 152 m (500 ft) |
| Sensor Material | Hastelloy pressure element, 316 stainless steel housing, POM (polyoxymethylene), FKM (fluoroelastomer), and polyamide components |