Measurement Instruments
Filter
Showing 2131–2160 of 2724 results
| Brand | Solinst |
|---|---|
| Origin | Canada |
| Model | Biofoul Screen |
| Application | Protective mesh guard for Solinst Levelogger Edge, Levelogger Junior Edge, and LTC Levelogger Junior series |
| Compatible Sensor Type | Submersible water level loggers with integrated conductivity and pressure sensing elements |
| Material | Corrosion-resistant stainless steel (316 SS) |
| Mesh Opening | 0.5 mm nominal aperture |
| Outer Diameter | 25.4 mm (1.0 in) |
| Length | 76 mm (3.0 in) |
| Weight | 42 g |
| Operating Temperature Range | –20 °C to +50 °C |
| IP Rating | IP68 (fully submersible to 100 m depth) |
| Brand | Solinst |
|---|---|
| Origin | Canada |
| Model | DataGrabber 3001 |
| Type | Pressure-Based Water Level Data Interface |
| IP Rating | IP64 |
| Operating Temperature | -20 °C to +50 °C |
| Power Supply | 9 V Alkaline or Lithium Battery |
| Battery Life | Up to 60 Full Downloads |
| Dimensions | Ø45.7 mm × 99.3 mm |
| Weight | 180 g |
| Compatible Loggers | Levelogger Edge, Jr., LTC, and Gold Series |
| USB Flash Drive Support | Standard USB 2.0 (up to 512 MB) |
| Brand | Solinst |
|---|---|
| Origin | Canada |
| Model | Driptych |
| Type | Acoustic Drip Counter |
| Power | Lithium Thionyl Chloride 1/2 AA 3.6 V |
| Dimensions | 55 × 55 × 65 mm |
| Weight | 300 g |
| IP Rating | IP65 (short-term submersion to 0.3 m) |
| Sensitivity | Detects ≥0.15 mL water droplets falling from ≤200 mm height |
| Max Drip Rate | 5 drops/s |
| Recording Interval | Configurable from 1 s to 24 h |
| Events per Bucket | Up to 16,383 |
| Total Buckets | 32,767 |
| Battery Life | Up to 10 years in sleep mode |
| Data Output | USB 3-pin interface |
| LED Indicators | Three status LEDs (power, activity, error) |
| Environmental Shielding | Acoustic noise rejection for false-trigger suppression (e.g., ambient sound, sheet flow) |
| Brand | Solinst |
|---|---|
| Origin | Canada |
| Model | Levelogger 5 Junior |
| Sensor Type | Submersible Pressure Transducer |
| Measurement Principle | Absolute Pressure with Temperature Compensation |
| Full-Scale Accuracy | ±0.1% FS |
| Data Storage Capacity | 40,000 paired temperature & water level readings |
| Sampling Interval Range | 0.5 seconds to 99 hours (user-selectable, linear or event-triggered) |
| Battery Life | Up to 5 years (typical continuous logging at 15-min intervals) |
| Enclosure Material | 316 stainless steel |
| IP Rating | IP68 (submersible to rated depth) |
| Pressure Ranges | 5 m H₂O (≈50 kPa) and 10 m H₂O (≈100 kPa) |
| Communication Interface | SDI-12 compliant |
| Software Compatibility | Levelogger EDGE v5.x or later |
| Calibration | Factory-calibrated with lifetime traceable calibration certificate |
| Brand | Solinst |
|---|---|
| Origin | Canada |
| Model | LTC |
| Type | Pressure-Based Water Level Logger |
| Housing Material | Titanium-Ceramic Coated |
| Pressure Sensor Material | Hastelloy |
| Conductivity Sensor | Quad-Platinum Electrode |
| Diameter | 22 mm |
| Length | 190 mm |
| Weight | ~200 g |
| Sampling Interval | 2 s – 99 h |
| Memory Capacity | 27,000 Data Points |
| Battery Life | ~8 Years |
| Temperature Range | −20 to +80 °C |
| Temp Accuracy | ±0.05 °C (with temperature compensation) |
| Temp Resolution | 0.003 °C |
| Depth Ranges | 5, 10, 20, 30, 100, or 200 m H₂O |
| Depth Accuracy | ±0.05% FS |
| Depth Resolution | 0.2–0.6 cm (dependent on range) |
| Conductivity Range | 0–100,000 µS/cm |
| Calibration Range | 50–80,000 µS/cm |
| Conductivity Accuracy | ±1% (5,000–80,000 µS/cm) |
| Conductivity Resolution | ±0.1 µS/cm |
| Brand | Solinst |
|---|---|
| Origin | Canada |
| Model | Levelogger 5 |
| Type | Pressure-Based Water Level Logger |
| Pressure Sensor Material | Hastelloy® |
| Housing Coating | Titanium PVD |
| Temperature Compensation Range | -10 °C to +50 °C |
| Accuracy (Full Scale) | 0.05% FS |
| Resolution | 24-bit |
| Temperature Accuracy | ±0.05 °C |
| Temp. Resolution | 0.003 °C |
| Battery Life | 10 years @ 1-min interval |
| Memory Capacity | 150,000 readings |
| Communication | Optical IR, RS-232, USB, SDI-12 |
| Dimensions | Ø22 mm × 159 mm |
| Weight | 129 g |
| Operating Temperature | -20 °C to +80 °C |
| Enclosure Material | 316 stainless steel, Hastelloy®, titanium-coated, POM, FKM |
| Brand | Solinst |
|---|---|
| Origin | Canada |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Imported |
| Model | 101 |
| Category | Fiber-Optic Water Level Sensor |
| Accuracy | ±1 mm (±0.01 ft) |
| Probe Options | P2 Standard (surface use), P7 Submersible (up to 300 m) |
| Tape Material | UV-stabilized polyethylene with embedded stainless-steel conductors |
| Tape Width | 9.5 mm (3/8 in) |
| Max Tape Length | 1800 m (6000 ft) |
| Power | 9 V alkaline battery |
| Output Indication | Audible buzzer + LED flash |
| Sensitivity Adjustment | Continuously variable conductivity threshold |
| Scale Marking | Permanent heat-embossed dual-side markings (mm & 0.01 ft) |
| Reel Design | Ergonomic hand-crank reel with mechanical brake, on/off switch, battery test button, and integrated probe holder |
| Brand | Solinst |
|---|---|
| Origin | Canada |
| Model | 101B |
| Sensor Type | Conductivity-based water level probe |
| Probe Dimensions | 12.7 mm diameter × 102 mm length |
| Probe Weight | 100 g |
| Tape Material | Polyethylene (PE) tape with heat-embossed metric graduations (cm and m) |
| Standard Tape Lengths | 30 m, 60 m, 100 m |
| Construction | Stainless steel probe, corrosion-resistant reel and ergonomic handle |
| Brand | Solinst |
|---|---|
| Origin | Canada |
| Model | 102 |
| Type | Capacitive/Conductive Water Level Detection Tape |
| Cable Diameter | 10 mm |
| Graduation | Laser-etched permanent markings at 1 mm intervals |
| Probe Options | P10 (10 mm × 70 mm, 174 g) and P4 (4 mm × 38 mm, 10 g) |
| Power Source | 9 V battery |
| Output Indication | Visual LED + audible buzzer |
| Compliance | Designed for field-deployable groundwater monitoring per ASTM D4044, ISO 555–2, and USGS NWIS protocols |
| Brand | Solinst |
|---|---|
| Country of Origin | Canada |
| Model | 104 |
| Product Type | Ultrasonic Water Level Meter |
| Measurement Range | 3–600 m (9–2000 ft) |
| Accuracy | ±3 cm (±0.1 ft) |
| Resolution | 1 cm (0.05 ft) |
| Operating Temperature | −20 to +45 °C (−10 to +110 °F) |
| Power Supply | 6 × AA alkaline batteries |
| Battery Life | Up to 500 h (21 days in power-saving mode) |
| Display | Backlit LCD with keypad interface |
| Probe Cable Length | 1.8 m (6 ft) |
| Probe Dimensions | 16 × 8 × 7 cm (6 × 3 × 3 in) |
| Control Unit Dimensions | 19 × 9 × 4 cm (7.5 × 3.5 × 1.5 in) |
| Control Unit Weight | 390 g (14 oz) |
| Units | Metric or Imperial selectable |
| Response Time | ~1 s at 150 m |
| Temperature Compensation | Integrated NTC sensor |
| Compliance | Designed for field-deployable environmental monitoring per ASTM D4044, ISO 14001-aligned workflows, and GLP-compliant data capture |
| Brand | SOLY |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Region of Manufacture | Domestic (China) |
| Model | 692 |
| Price Range | USD 1,400 – 7,000 |
| Instrument Type | Online Monitoring System |
| Infrared Resolution | 384 × 288 |
| NETD | <0.04 °C @ 30 °C |
| FOV | 28° × 21° |
| Detector Type | Uncooled Polysilicon FPA, 17 µm pixel pitch, 8–14 µm spectral response |
| Frame Rate | 50 Hz |
| Temperature Range | 20–60 °C |
| Measurement Accuracy | ≤ ±0.3 °C (with optional high-precision blackbody calibrator, ambient 15–35 °C) |
| Repeatability | ≤ ±0.5 °C |
| Thermal Image Modes | Grayscale / Iron Red / Rainbow |
| FFC Correction | Auto & Manual |
| Output Format | Standard JPEG with embedded radiometric temperature data |
| Interface | USB 2.0 |
| Operating Temperature | 0–40 °C |
| Storage Temperature | −20–50 °C |
| IP Rating | IP54 |
| Power | DC 12 V (220 V AC adapter included) |
| Battery Life | >10 h (standby + continuous operation) |
| Weight | ~560 g |
| Dimensions | 97 × 145 × 93.5 mm |
| Mounting | Standard UNC 1/4"-20 tripod thread |
| Warranty | 1 year |
| Origin | USA |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Imported |
| Model | ADP |
| Pricing | Upon Request |
| Velocity Range | ±10 m/s |
| Velocity Resolution | 0.1 cm/s |
| Velocity Accuracy | ±1% of measured velocity or ±0.5 cm/s (whichever is greater) |
| Maximum Ensembles | 100 cells per profile |
| Operating Frequencies | 250 kHz, 500 kHz, 1000 kHz, 1500 kHz, 3000 kHz |
| Max Profiling Range | 3–180 m (frequency-dependent) |
| Power Supply | 12–24 V DC |
| Continuous Power Consumption | 2.0–2.5 W |
| Sleep Mode Power | <1 mW |
| Internal Memory Options | 128 MB / 512 MB / 1024 MB |
| Compass & Tilt Sensor Resolution | 0.1° (heading, pitch, roll) |
| Compass Accuracy | ±2° (heading), ±1° (pitch/roll) |
| Pressure Sensor Options | Strain-gauge (±0.1% FS) or Resonant quartz (±0.01% FS) |
| Transducer Configurations | 3-beam vertical, 2-beam side-looking, 4-beam Janus, 4-beam with vertical beam |
| Software Suite | RiverSurveyor, CurrentSurveyor, CurrentMonitor, ViewADP, SonWave |
| External Sensor Interfaces | CTD (Sea-Bird MicroCAT), Turbidity (D&A OBS), Pressure (Paroscientific quartz) |
| Brand | SonTek |
|---|---|
| Origin | USA |
| Model | ADV |
| Frequency Options | 5 MHz / 10 MHz / 16 MHz |
| Sampling Volume | 0.09–2.0 cm³ |
| Sampling Rate | 0.1–50 Hz |
| Measurement Distance from Transducer | 5–18 cm |
| Velocity Resolution | 0.01 cm/s |
| Velocity Accuracy | ±1% of measured value or ±0.25 cm/s (whichever is greater) |
| Max Operating Depth | 60 m (10/16 MHz), 250 m (5 MHz Delrin), 2000 m (5 MHz Stainless Steel) |
| Power Supply | 12–24 V DC |
| Power Consumption | 2.5–4 W (active), <1 mW (sleep) |
| Probe Configurations | 3D-top-view, 3D-side-view, 3D-upward-view, 2D-side-view |
| Interface | Waterproof connector, splash-proof signal processor |
| Calibration | Factory-performed, stable long-term calibration |
| Compliance | Designed for ASTM D5766, ISO 748, and USGS/USACE hydrodynamic measurement protocols |
| Brand | SonTek |
|---|---|
| Origin | USA |
| Model | Argonaut-SL |
| Product Type | Acoustic Doppler Velocity Profiler |
| Measurement Principle | Broadband Acoustic Doppler Current Profiling (ADCP) with Vertical-Beam Water Level Sensing |
| Velocity Range | ±6 m/s |
| Velocity Resolution | 0.1 cm/s |
| Velocity Accuracy | ±1% of measured velocity or ±0.5 cm/s |
| Water Level Range (SL3000/SL1500/SL500) | 0.1–5 m / 0.15–10 m / 0.2–18 m |
| Water Level Accuracy | ±0.3 cm (depth < 3 m) or ±0.1% (depth ≥ 3 m) |
| Beam Angle (Horizontal/Vertical) | 1.4° / 1.4°, 1.4° / 2.9°, 1.4° / 3.8° |
| Side Lobe Suppression | >60 dB |
| Power Input | 7–15 V DC |
| Power Consumption | 0.5–1.0 W |
| Operating Temperature | –5°C to +60°C |
| Pressure Rating | Up to 30 m water depth |
| Communication | RS-232, SDI-12, optional RS-422 (up to 1500 m), Modbus, 4–20 mA / 0–5 V analog output |
| Memory | 4 MB (≥200,000 samples) |
| Integrated Temperature Sensor | ±0.1°C accuracy, 0.01°C resolution |
| Brand | SonTek |
|---|---|
| Origin | USA |
| Model | Argonaut-SW |
| Measurement Principle | Acoustic Doppler Velocimetry (ADV) with Three-Beam Configuration |
| Velocity Range | ±5 m/s |
| Velocity Accuracy | ±1% of measured value or ±0.5 cm/s |
| Velocity Resolution | 0.1 cm/s |
| Depth Range | 0.2–5.0 m |
| Water Level Accuracy | ±0.1% of measured level or ±0.3 cm |
| Minimum Measurable Depth | 0.2 m total depth (0.1 m above transducer) |
| Operating Temperature | −5°C to +60°C |
| Pressure Rating | 25 m submersion |
| Power Input | 5–15 VDC |
| Power Consumption | 500–700 mW |
| Communication Protocols | RS-232, SDI-12 |
| Onboard Memory | 4 MB (≥50,000 samples) |
| Dimensions | 24.5 × 10.0 × 6.3 cm |
| Weight | 1.2 kg (air), 0.15 kg (water buoyant) |
| Integrated Temperature Sensor | ±0.5°C accuracy, ±0.1°C resolution |
| Flow Calculation | Real-time based on user-defined channel geometry |
| Brand | SonTek |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Pricing | Available Upon Request |
| Measurement Principle | Acoustic Doppler Velocimetry (ADV) |
| Form Factor | Handheld |
| Display | Backlit LCD |
| Memory | 4 MB (up to 64 flow files, 160,000 velocity readings) |
| Probe | 2D point measurement probe with 2 m flexible cable |
| Minimum Measurable Depth | 2 cm |
| Minimum Measurable Velocity | 0.001 m/s |
| Maximum Measurable Velocity | 4.5 m/s |
| Velocity Resolution | 0.1 cm/s |
| Velocity Accuracy | ±1% of measured value |
| Temperature Sensor | Integrated, resolution ±0.1 °C |
| Operating Temperature | −20 °C to +50 °C |
| Storage Temperature | −20 °C to +50 °C |
| Power Supply | 8 × AA batteries (alkaline, NiMH, or NiCd) |
| Battery Life | Up to 25 hours (alkaline) |
| Weight | 1.8 kg |
| Probe Width | 13 cm |
| Water Resistance | IP68 (submersible to 1 m) |
| Communication | RS-232 |
| Remote Sampling Location | 10 cm upstream of transducer |
| Flow Calculation Engine | USGS/ISO-compliant real-time discharge computation |
| Calibration | Factory-calibrated in controlled flume environments per ISO 748 and ASTM D3858 standards |
| Software | FlowTracker PC software for data download, QA/QC, report generation, and compliance documentation |
| Brand | SonTek |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Imported |
| Model | FlowTracker2 |
| Price Range | USD 13,500 – 40,500 (est.) |
| Technology | Acoustic Doppler Velocimetry (ADV) |
| Measurement Type | Point Velocity and Discharge |
| Key Performance | Low-velocity & shallow-water capability |
| Minimum Measurable Depth | 0.02 m |
| Velocity Range | 0.001–4.0 m/s |
| Resolution | 0.0001 m/s |
| Accuracy | ±1% of measured velocity or ±0.0025 m/s (whichever is greater) |
| Operating Temperature (Probe) | −20 °C to +50 °C |
| Operating Temperature (Display Unit) | −20 °C to +60 °C |
| Storage Temperature | −30 °C to +70 °C |
| Power Supply | 8 × AA batteries (alkaline, NiMH, or NiCd) |
| Weight | 1.55 kg |
| Display IP Rating | IP67 (1 m submersion for 30 min) |
| Integrated Sensors | Tilt, orientation, GPS, Bluetooth 4.0 |
| Memory | Non-volatile internal storage |
| Compliance | ISO 748, USGS TWRI 3-A17, ASTM D3858, SmartQC™ real-time quality assurance |
| Brand | SonTek |
|---|---|
| Origin | USA |
| Model | FlowTracker2 |
| Technology | Acoustic Doppler Velocimetry |
| Probe Configurations | 2-beam or 3-beam |
| Output Data Format | CSV |
| Temperature Compensation | Yes |
| Velocity Components | U, V, W (X, Y, Z) |
| Real-time Visualization | Yes |
| Compliance | Designed for ASTM D5118, ISO 748, and GLP-aligned data acquisition workflows |
| Software | FlowTracker2 PC Software (Windows), Firmware-upgradable |
| Power | USB-powered or external 12 V DC |
| Brand | Xylem |
|---|---|
| Origin | USA |
| Model | IQ |
| Measurement Principle | Pulse-Coherent Acoustic Doppler Velocimetry (PC-ADVP) |
| Beam Configuration | 5-beam (4 oblique + 1 vertical) |
| Minimum Measurable Depth | 8 cm |
| Communication Interfaces | Modbus RTU, SDI-12, RS-232 |
| Power Consumption | <1.5 W (typical operational average) |
| Water Level Sensing | Integrated absolute pressure transducer + vertical acoustic beam |
| Channel Geometry Input | Supported via SonTek IQ Software (v3.0+) |
| Compliance | ASTM D5388-22 (Standard Practice for Acoustic Doppler Velocity Measurements in Open Channels), ISO 748:2022 (Liquid flow measurement in open channels — Velocity-area method) |
| Brand | SonTek |
|---|---|
| Origin | USA |
| Model | RiverSurveyor |
| Flow Velocity Range | ±10 m/s |
| Resolution | 0.1 cm/s |
| Accuracy | ±1% of measured velocity or ±0.5 cm/s (whichever is greater) |
| Cells | Up to 100 depth cells |
| Operating Temperature | −5°C to 40°C |
| Storage Temperature | −10°C to 50°C |
| Power Supply | 12–24 V DC |
| Power Consumption (operational) | 2.0–2.5 W |
| Battery Capacity (2× alkaline, 5°C) | 1200 Wh (20–25 h continuous operation) |
| Transducer | 10 cm diameter, triple-beam, titanium housing with epoxy-coated elements |
| Integrated Sensors | Compass, tilt, temperature |
| Interface | Wet-mateable digital signal processor, DGPS-ready, RS-232 serial |
| Cables | 3 m 14-conductor high-frequency power/data cable, 2 m RS-232 cable |
| Software | RiverSurveyor v6.x for Windows (includes audit-trail logging, GLP-compliant data export, and FDA 21 CFR Part 11–ready configuration options) |
| Brand | SonTek |
|---|---|
| Origin | USA |
| Model | RiverSurveyor S5/M9 |
| Velocity Range | ±20 m/s |
| Depth Range | 0.2–15 m (S5), 0.2–80 m (M9) |
| Velocity Resolution | 0.001 m/s |
| Velocity Accuracy | ±0.25% of measured value ± 0.002 m/s |
| Cell Size | 0.02–0.5 m (S5), 0.02–4 m (M9) |
| Number of Cells | up to 128 |
| Transducer Configuration | S5 — five transducers (four 3.0 MHz at 25° tilt, one 1.0 MHz vertical) |
| Depth Accuracy | ±1% |
| Temperature Sensor Accuracy | ±0.1 °C, Resolution: 0.01 °C |
| Compass/Tilt Accuracy | Heading ±2°, Roll/Pitch ±1° |
| Internal Memory | 8 GB |
| Operating Voltage | 12–18 V DC |
| Battery Life | 8 h (standard), 4 h (with RTK GPS) |
| Max Output Rate | 2 Hz |
| Internal Sampling Rate | up to 70 Hz |
| Wireless Options | Bluetooth (60 m smartphone / 200 m laptop), Spread-Spectrum Radio (2000 m) |
| GPS Accuracy | GGA/VTG — 1 m |
| Operating Temperature | –5 to 45 °C |
| Storage Temperature | –10 to 70 °C |
| S5 Dimensions | Ø6.1 cm (top), Ø12.7 cm (bottom), H25.4 cm |
| Weight | 1.1 kg (air), –0.3 kg (water) |
| M9 Dimensions | Ø12.8 cm, H25.2 cm |
| Weight | 2.3 kg (air), –0.6 kg (water) |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | S5/M9 |
| Pricing | Available Upon Request |
| Operating Temperature | -5°C to 45°C |
| Storage Temperature | -10°C to 70°C |
| Power Supply | 12–18 V DC, rechargeable battery (8 h runtime |
| Memory | 8 GB non-volatile internal storage |
| Max Output Rate | 2 Hz |
| Internal Sampling Rate | up to 70 Hz |
| Velocity Range | ±20 m/s |
| Velocity Accuracy | ±0.25% of measured value |
| Minimum Measurement Distance | 0.06 m |
| Max Depth Range | 80 m (M9) |
| Depth Resolution | 0.01 m |
| Temperature Sensor Resolution | 0.01°C |
| Temperature Accuracy | ±0.1°C |
| Compass/Tilt Range | 360° heading, ±2° heading accuracy, ±1° roll/pitch accuracy |
| RTK GPS Accuracy | 0.03 m horizontal |
| VTG/GGA GPS Accuracy | sub-meter |
| Bluetooth Range | 60 m (mobile), 200 m (laptop) |
| Spread-Spectrum Radio Range | 2000 m |
| Transducer Configurations | Multi-frequency, auto-adaptive cell size, frequency, and sampling mode |
| Brand | SonTek |
|---|---|
| Origin | USA |
| Model | RS5® |
| Measurement Principle | Acoustic Doppler Velocimetry |
| Product Type | River ADCP System |
| Compliance | ASTM D5389, ISO 748, USGS TWRI 3-A12, EPA Method 160.1 |
| Data Output Formats | Excel (.xlsx), MATLAB (.mat), KML/KMZ (Google Earth), CSV |
| Software Platform | RSQ v5.x with SmartPulse+ Processing Engine |
| Deployment Options | Boat-mounted, Cable-suspended, rQPOD Remote-Controlled Floating Platform |
| Beam Configuration | 4-beam Janus, optional 3-beam switching for bank interference mitigation |
| Velocity Range | ±15 m/s (user-configurable), Resolution: 1 mm/s |
| Cell Size | 0.1–2.0 m (adjustable) |
| Maximum Profiling Depth | 50 m (dependent on frequency & water conditions) |
| Operating Frequency | 1500 kHz (standard), optional 600/300 kHz for deeper profiling |
| Brand | SoopTop |
|---|---|
| Origin | Shanghai, China |
| Model | AE124C |
| Type | Analytical Balance |
| Maximum Capacity | 120 g |
| Readability | 0.0001 g |
| Repeatability (Standard Deviation) | 0.0001 g |
| Calibration | Internal |
| Pan Diameter | Ø90 mm |
| Dimensions (W×D×H) | 365 × 223 × 338 mm |
| Net Weight | 5.5 kg |
| Windshield Effective Volume | 160 × 165 × 200 mm |
| Brand | SOP TOP |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | AE224 |
| Instrument Type | Analytical Balance |
| Maximum Capacity | 220 g |
| Readability | 0.0001 g |
| Repeatability (Standard Deviation) | 0.0001 g |
| Calibration | Internal |
| Weighing Pan Diameter | Ø90 mm |
| Dimensions (W×D×H) | 365 × 223 × 338 mm |
| Net Weight | 5.5 kg |
| Windshield Internal Volume | 160 × 165 × 200 mm |
| Environmental Compliance | CE, ISO/IEC 17025-compatible operation environment |
| Brand | SOP TOP |
|---|---|
| Origin | Shanghai, China |
| Model | AE224J |
| Maximum Capacity | 220 g |
| Readability | 0.0001 g |
| Repeatability (SD) | 0.0001 g |
| Calibration | External |
| Pan Diameter | Ø90 mm |
| Draft Shield Internal Volume | 160 × 165 × 200 mm |
| Dimensions (W×D×H) | 365 × 223 × 338 mm |
| Net Weight | 6 kg |
| Power Supply | AC 100–240 V, 50/60 Hz |
| Brand | SOP TOP |
|---|---|
| Origin | Shanghai, China |
| Model | AE523J |
| Maximum Capacity | 520 g |
| Readability | 0.001 g |
| Repeatability (Standard Deviation) | 0.001 g |
| Calibration | External |
| Pan Diameter | Ø90 mm |
| Draft Shield Internal Volume | 160 × 165 × 200 mm |
| Dimensions (W×D×H) | 365 × 223 × 338 mm |
| Net Weight | 6 kg |
| Power Supply | AC 100–240 V, 50/60 Hz |
| Brand | SOP TOP |
|---|---|
| Origin | Shanghai, China |
| Model | FA2004 |
| Instrument Type | Analytical Balance |
| Maximum Capacity | 200 g |
| Readability | 0.1 mg |
| Repeatability | ±0.1 mg |
| Linearity | ±0.2 mg |
| Pan Diameter | Φ90 mm |
| Draft Shield Dimensions (W×D×H) | 190 × 155 × 235 mm |
| External Dimensions (W×D×H) | 200 × 440 × 290 mm |
| Calibration Method | External |
| Connectivity | RS232 interface |
| Temperature Compensation | Dynamic full-range |
| Weighing Modes | Counting, Percentage Weighing, Unit Conversion (g, oz, ct, etc.) |
| Brand | SOP TOP |
|---|---|
| Model | MP Series |
| Type | Platform Balance |
| Capacity Range | 60 kg to 300 kg |
| Readability | 1 g to 10 g |
| Repeatability | ±1 g to ±10 g |
| Linearity Error | ±2 g to ±20 g |
| Calibration | External |
| Stabilization Time | ≤2 s |
| Pan Size | 400 × 500 mm |
| Power Supply | AC/DC Dual Mode |
| Interface | RS232 (optional) |
| Print Output | Optional Dedicated Printer |
| Units | 7 selectable (g, kg, lb, oz, ct, etc.) |
| Overload Protection | Yes |
| Tare & Zero Function | Full-range |
| Operating Environment | Lab/Industrial QC |
| Compliance | Designed for ISO/IEC 17025-aligned weighing workflows, supports GLP/GMP documentation via optional data export |