StableTemp Incubator Model 01100-22 by U.S. Manufacturer

Overview

The StableTemp Incubator Model 01100-22 is a precision-engineered, benchtop forced-air incubator designed for consistent thermal environments in cell culture, microbiological growth, enzyme assays, and stability testing applications. Engineered for laboratory-grade reliability, it employs a microprocessor-controlled PID temperature regulation system that maintains setpoint accuracy within ±0.5 °C across the full operating range (ambient to 90 °C). Its forced-air convection architecture ensures rapid thermal equilibration and high spatial uniformity—critical for reproducible biological outcomes. Unlike passive or natural-convection units, this model integrates a calibrated axial fan with optimized airflow ducting to eliminate cold/hot spots, validated per ISO 13485-aligned internal mapping protocols. The chamber is constructed with anodized aluminum walls and floor, offering non-porous, non-reactive surfaces compatible with routine ethanol or hydrogen peroxide vapor decontamination. The polycarbonate front door provides continuous visual monitoring without compromising thermal integrity, while its mechanical latch meets GLP-compliant access control requirements.

Key Features

• Digital PID microprocessor controller with intuitive LED interface and real-time temperature readout
• Over-temperature safety cutoff with dedicated red LED alarm indicator and automatic heater shutoff
• Programmable 5-hour countdown timer for unattended operation and process endpoint signaling
• Two adjustable, load-rated aluminum shelves (standard); additional shelves available as optional accessories
• Corrosion-resistant stainless steel exterior with durable epoxy-polyester coating—resistant to scratches, discoloration, and common lab solvents
• Sealed chamber design with low-leakage gasket and minimal air exchange rate (<0.5 ACH), reducing humidity drift and energy consumption
• Compliance-ready architecture: supports audit trails when integrated with external data loggers meeting FDA 21 CFR Part 11 requirements

Sample Compatibility & Compliance

The 01100-22 accommodates standard tissue culture flasks (T25–T225), Petri dishes (up to 150 mm), multiwell plates (6–96-well), and glass vials—without obstructing airflow or impeding shelf adjustability. Its 70 L chamber volume (43 × 38 × 43 cm internal) allows simultaneous incubation of heterogeneous sample sets under identical thermal conditions. All materials in direct contact with the chamber environment—including shelf supports, wall panels, and door seal—are USP Class VI-certified and extractables-tested per ASTM F814. The unit complies with IEC 61010-1 (Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use) and meets electromagnetic compatibility (EMC) standards per IEC 61326-1. It is suitable for use in ISO 13485-certified manufacturing environments and supports GxP-aligned validation protocols (IQ/OQ/PQ).

Software & Data Management

While the 01100-22 operates via embedded firmware without proprietary software dependency, its analog output (0–10 V or 4–20 mA, optional) enables seamless integration with third-party environmental monitoring systems (e.g., DeltaTRAK, SensiLog, or custom SCADA platforms). The controller logs minimum/maximum temperature values over time, accessible via manual recall. For regulated environments, users may connect compliant USB or Ethernet data loggers (NIST-traceable) to generate timestamped, tamper-evident records with electronic signatures—fully auditable under FDA 21 CFR Part 11 and EU Annex 11 guidelines. Firmware updates are performed via secure serial interface; version history and calibration metadata are retained internally for traceability.

Applications

• Mammalian and insect cell culture maintenance at 37 °C ±0.3 °C
• Bacterial and fungal cultivation (e.g., E. coli, S. cerevisiae) across 25–42 °C ranges
• Enzyme kinetics studies requiring stable sub-physiological temperatures (e.g., 4–25 °C)
• Accelerated stability testing per ICH Q1A(R2) guidelines (e.g., 40 °C/75% RH for 6 months)
• Hybridoma expansion and monoclonal antibody production workflows
• Quality control incubation for pharmaceutical raw material bioburden assessment (USP )

FAQ

Is the 01100-22 certified for use in GLP or GMP laboratories?
Yes—its construction, documentation package (including factory calibration certificate), and design support IQ/OQ/PQ execution per ASTM E2500 and EU GMP Annex 15.
Can humidity be controlled independently of temperature?
No—the 01100-22 is a dry-air incubator; relative humidity is ambient and unregulated. For active humidity control, consider the StableTemp HumiLine series (e.g., Model 01200-22).
What is the recommended calibration interval?
Annual calibration against NIST-traceable reference thermometers is advised; internal sensor verification can be performed quarterly using a calibrated PT100 probe.
Are spare parts and service support available internationally?
Yes—authorized distributors provide genuine components (door gaskets, fans, controllers) and technical support with documented response SLAs.
Does the unit include a CO₂ sensor or gas inlet port?
No—this is a standalone thermal incubator. CO₂-capable variants (e.g., Model 01300-22) are available separately with IR-based sensing and dual-gas mixing capability.