Optical Laboratory Equipment
Filter
Showing 1457–1472 of 4286 results
| Brand | HT (Handing) |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | HTPZ-F |
| Pricing | Available Upon Request |
| Brand | HT |
|---|---|
| Model | HTRH100R |
| Rod Length | 100 mm |
| Mounting Base | Magnetic |
| Rotation Range | 360° about Rod Axis |
| Bearing Type | Precision Ball Bearing |
| Construction | Aluminum Alloy with Black Anodized Finish |
| Locking Mechanism | Dual Independent Knob Locks (Rod & Rotation Stage) |
| Compliance | Designed for ISO/IEC 17025-aligned optical alignment workflows |
| Brand | HT |
|---|---|
| Model | HTRH50R |
| Rod Length | 50 mm |
| Origin | Jiangsu, China |
| Distribution Type | Authorized Distributor |
| Compliance | Designed for ISO/IEC 17025-aligned optical alignment workflows |
| Brand | Han Ding (HT) |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | PRC |
| Model | HTAC-PS-03 |
| Weight | 0.04 kg |
| Bore Diameter | 12.5 mm |
| Orthogonal Mounting Holes | Two, mutually perpendicular |
| Brand | Han Ding (HT) |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Manufacture | China |
| Model | HTAC-PS-04 |
| Bore Diameter | 12.5 mm |
| Rotation | ±180° continuous (360° relative between two mounting holes) |
| Mass | 0.01 kg |
| Material | Anodized aluminum alloy (6061-T6) |
| Surface Finish | Black anodized, non-reflective |
| Mounting Thread | M6 × 0.75 (standard for optical posts and breadboards) |
| Compatibility | Accepts Ø12.5 mm optical posts, rods, and kinematic pins |
| Key | Brand: HT (Handing) |
|---|---|
| Model | HTAC-RC-01 |
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (PRC) |
| Pricing | Available Upon Request |
| Brand | HT / Han Ding |
|---|---|
| Origin | Jiangsu, China |
| Model | HTAS100-13-N |
| Thread Specification | 1/4"-100 UNC (Pitch: 0.254 mm) |
| Material | Stainless Steel Shaft with Hardened Brass Nut |
| Locking Mechanism | Integrated Locking Collar |
| Compatibility | Standard Newport-compatible Mounting Interface (M4 & 8-32 Tapped Holes) |
| Optional | Knurled Metal Handwheel |
| Drive Tip | Ball-Tipped Sliding Contact Design |
| Brand | Han Ding / HT |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | HTAS80-13-N |
| Pitch | 0.318 mm (equivalent to 1/4"-80 UNC) |
| Thread Standard | Imperial Fine Thread (1/4"-80 UNC) |
| Nut Material | Bronze |
| Drive Mechanism | Ball-Tipped Sliding Contact |
| Compatibility | Newport-compatible mounting interface (standard optical mount footprint) |
| Optional Feature | Knurled Metal Knob (detachable) |
| Brand | HanDing / HT |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | HTCL25-X |
| Product Category | Manual Translation Stage |
| Travel Range | 25 mm |
| Drive Mechanism | Precision Differential Micrometer (Center-Mounted) |
| Guidance System | Linear Ball Bearing Rails |
| Backlash Compensation | Spring-Loaded Preload |
| Mounting Pattern | Standard ISO/Metric Tapped Holes on Top and Base Plates |
| Compliance | Designed for ISO/IEC 17025-aligned optical alignment workflows |
| Brand | Han Ding / HT |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | HTDL100-X |
| Travel Range | 100 mm |
| Drive Mechanism | Precision Ground Lead Screw |
| Guide Type | Dual Dove-Tail Rails |
| Mounting Pattern | Standard ISO/Metric Tapped Holes (M4/M6) on Top and Base Plates |
| Orientation Flexibility | Compatible with Right-Angle Brackets for Vertical or Multi-Axis Assembly |
| Product Category | Manual Optical Translation Stage |
| Compliance | Designed for Laboratory-Grade Optical Alignment in Accordance with ISO 10110-7 (Optical Component Mounting Tolerances) and Compatible with Common Optical Table Grid Standards (e.g., M6 × 25 mm Pitch) |
| Brand | Han Ding (HT) |
|---|---|
| Model | HTDL50-X |
| Travel | 50 mm |
| Rail Type | Dual Dove-Tail |
| Drive Mechanism | Precision Ground Lead Screw (Pitch: 0.254 mm) |
| Top Plate Dimensions | 100 × 62 mm |
| Central Load Capacity | 6 kg |
| Product Category | Manual Translation Stage |
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Brand | HT (Handing) |
|---|---|
| Model | HTDM-13 |
| Total Travel | 13 mm |
| Fine Adjustment Range | 0.2 mm |
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Compliance | ISO 9001–certified supply chain |
| Mounting Interface | Standard M6 and SM1 (1.035"-40) compatible |
| Brand | Han Ding / HT |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Regional Classification | Domestic (China) |
| Model | HTFM-U |
| Pricing | Upon Request |
| Brand | HT (Handing) |
|---|---|
| Model | HTFPS301R |
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Pricing | Available Upon Request |
| Brand | Han Ding / HT |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Regional Classification | Domestic (China) |
| Model | HTFPS501 |
| Pricing | Available Upon Request |
| Brand | HT (Handing) |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | HTFPS501R |
| Pricing | Upon Request |