Optical Laboratory Equipment
Filter
Showing 1569–1584 of 4287 results
| Brand | Microphotons (Xiaoxiao Photonics) |
|---|---|
| Origin | Canada |
| Manufacturer Type | OEM Producer |
| Origin Category | Imported |
| Model | Yb-MCOF-35/250-56/400-07-2.2-T0.7-PM |
| Component Category | Optical Component |
| Core NA | 0.07 ± 0.01 |
| Cladding NA | > 0.47 |
| Pump Absorption @ 915 nm | 2.2 ± 0.5 dB/m |
| Pump Absorption @ 975 nm | 10 dB/m (input section), 4 dB/m (output section) |
| Birefringence | ≥ 1.4 × 10⁻⁴ |
| Taper Length | 0.7 ± 0.2 m |
| Input Core Diameter | 35 ± 3 µm |
| Input Cladding Diameter | 250 ± 10 µm |
| Input Coating Diameter | 500 ± 30 µm |
| Output Core Diameter | 56 ± 5 µm |
| Output Cladding Diameter | 400 ± 20 µm |
| Output Coating Diameter | 520 ± 30 µm |
| Non-tapered Section Length | > 1.0 m |
| Confined Core | Yes |
| Dimpled Cladding | Yes |
| Effective Mode Area (output) | ~1000 µm² |
| Brand | INO |
|---|---|
| Origin | Canada |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | T-DCF Fiber |
| Price Range | USD 700 – 14,000 |
| Brand | INO |
|---|---|
| Origin | Canada |
| Model | YB401-PM, Yb-MCOF-10/125-08-1.6-PM, Yb-DCOF-15/125-08-2.7-PM, Yb-MCOF-35/250-07-0.9-PM, Yb-MCOF-35/250-07-2.5-PM, Yb-MCOF-40/250-07-3.0-PM, Yb-MCOF-25/250-56/400-07-2.2-T0.7-PM |
| Core Diameter | 5–56 µm |
| Cladding Diameter | 125–400 µm |
| Core NA | 0.07–0.14 |
| Pump Absorption @915 nm | 0.9–140 dB/m |
| M² | <1.15–<1.20 |
| Effective Mode Area | ~1000 µm² (for tapered variant) |
| Polarization Extinction Ratio | >20 dB |
| Bend Tolerance | ≥6 cm to ≥40 cm minimum bending radius |
| Coating | Dual-layer acrylate (standard), optional hermetic carbon or gold coating |
| Brand | Microphotons |
|---|---|
| Origin | Canada |
| Manufacturer Type | OEM Fiber Producer |
| Product Origin | Imported |
| Model | YB-MCOF-10/125-08-1.6-PM |
| Pump Absorption @ 915 nm | 1.6 ± 0.3 dB/m |
| Core NA | 0.08 ± 0.01 |
| Cladding NA | > 0.47 |
| Nominal Pump Absorption @ 975 nm | 6 dB/m |
| Birefringence | ≥ 2.0 × 10⁻⁴ |
| Core Diameter | 10 ± 1 µm |
| Cladding Diameter | 125 ± 1 µm |
| Coating Diameter | 245 ± 10 µm |
| Cladding Geometry | Round |
| Core/Cladding Concentricity Error | < 1 µm |
| Proof Test Level | 100 kpsi |
| Optical Cladding | Multiclad |
| Confined Core | No |
| Depressed Cladding | No |
| Brand | Microphotons |
|---|---|
| Origin | Canada |
| Manufacturer Type | OEM Fiber Producer |
| Origin Category | Imported |
| Model | Yb401-PM |
| Component Category | Laser Gain Medium / Active Fiber |
| Brand | Instec |
|---|---|
| Origin | USA |
| Model | AHP202 |
| Temperature Range | Ambient to 200 °C (upgradable) |
| Temperature Resolution | 0.001 °C |
| Temperature Stability | ±0.05 °C (at 100 °C) |
| Heating Rate | +20 °C/min (at 100 °C) |
| Control Drift | ±0.1 °C/hour |
| Sensor | 100 Ω Pt RTD |
| Control Method | LVDC-based PID |
| Sample Area | 38 mm × 38 mm |
| Controller | mK2000 Integrated Linear Variable DC Power Supply |
| Software Interface | LabVIEW SDK Available |
| Compliance | Designed for GLP/GMP-adjacent AFM workflows requiring traceable thermal control |
| Brand | Instec |
|---|---|
| Origin | USA |
| Model | CLM77K, CLM77Ki |
| Temperature Range | −190 °C to +120 °C |
| Temp. Resolution | 0.01 °C |
| Temp. Stability | ±0.05 °C (at 100 °C) |
| Heating Rate | +60 °C/min (at 100 °C) |
| Cooling Rate | −50 °C/min (at 100 °C) |
| Control Mode | Switching PID (upgradable to LVDC PID) |
| Sensor | 100 Ω Pt RTD |
| Objective Working Distance | 5 mm |
| Condenser WD (CLM77K) | 17.6 mm |
| Condenser WD (CLM77Ki) | 19.3 mm |
| Sample Grid | 9 × Ø3 mm apertures |
| Observation Area | 2 mm diameter |
| XY Micrometer Resolution | 10 µm |
| Mounting | Vertical & Horizontal Configurable |
| Brand | Instec |
|---|---|
| Origin | USA |
| Manufacturer Status | Authorized Distributor |
| Origin Category | Imported |
| Model | Custom High-Pressure Cryo-Heating Stage |
| Pricing | Available Upon Request |
| Brand | Instec |
|---|---|
| Origin | USA |
| Manufacturer Status | Authorized Distributor |
| Product Type | Imported |
| Model | Custom-Engineered |
| Pricing | Available Upon Request |
| Brand | Instec |
|---|---|
| Origin | USA |
| Model | HCC |
| Temperature Range | –80 °C to +300 °C (model-dependent) |
| Sample Diameter | 45 mm to 300 mm (6″ to 12″) |
| Temperature Stability | ±0.05 °C (>25 °C), ±0.1 °C (<25 °C) |
| Temperature Uniformity | ±2% across chuck surface |
| Resolution | 0.01 °C |
| Vacuum Ports | Multiple independent channels |
| Electrical Interface Options | BNC (coaxial or triaxial), RF-grounded (R), floating (RF), or triaxial (RT) |
| Cooling | Liquid-cooled base with water circulation |
| Control | PID via 100 Ω Pt RTD sensor |
| Brand | Instec |
|---|---|
| Origin | USA |
| Model Variants | HCC206R, HCC306RT, HCC308R, HCC30CRT, etc. |
| Temperature Resolution | 0.001 °C |
| Stability | ±0.05 °C (at 100 °C) |
| Uniformity | ±0.1 °C/cm |
| Heating Rate | up to +60 °C/min (HCC206R at 100 °C) |
| Cooling | LN₂-compatible (with optional cryogenic pump & dewar) |
| Temperature Range | –100 °C to +310 °C (model-dependent) |
| Sensor | 100 Ω Pt RTD |
| Control Algorithm | Switching PID (upgradable to LVDC-PID) |
| Vacuum Interface | Dual independent vacuum grooves (top & bottom), Swagelok-compatible (optional) |
| Electrical Options | Grounded or floating stage (configurable) |
| Mechanical Options | Ejector pin holes (optional), water-cooled housing (optional) |
| Software | LabVIEW SDK included, temperature-image synchronization support (with compatible microscope cameras) |
| Brand | Instec |
|---|---|
| Origin | USA |
| Model | HCC302 |
| Temperature Range | –120 °C to 310 °C (LN₂ required for sub-zero) |
| Temp. Resolution | 0.001 °C |
| Stability | ±0.05 °C (at 100 °C) |
| Uniformity | ±0.1 °C/cm |
| Heating Rate | +50 °C/min (at 100 °C) |
| Cooling Rate | –50 °C/min (at 100 °C) |
| Sensor | 100 Ω Pt RTD |
| Control Mode | Switching PID (upgradable to LVDC PID) |
| Sample Cavity | 48 mm × 60 mm |
| Optical View Area | 26.5 mm (with top cover) |
| Controller | mK2000 |
| Software | LabVIEW-compatible SDK included |
| Brand | Instec |
|---|---|
| Origin | USA |
| Model | HCC602 |
| Heating Block Material | Silver |
| Vacuum Adsorption | Independent Channel with Customizable Ports |
| Base Cooling | Optional Integrated Thermoelectric Cooler (TEC) or Liquid Chiller Interface |
| Mounting | Compatible with Probe Stations and Custom Fixture Integration |
| Temperature Sensor | 100 Ω Platinum RTD |
| Control Resolution | 0.01 °C |
| Stability | ±0.05 °C (>25 °C), ±0.1 °C (<25 °C) |
| Required Controller | mK2000 Precision Temperature Controller (LVDC low-noise PID option available) |
| Software | WinTemp (Windows-based temperature programming, real-time monitoring, and data logging) |
| Brand | Instec |
|---|---|
| Origin | USA |
| Model Variant | HCP 200/300/400 S & C Series |
| Temperature Range | −190 °C to +600 °C (model-dependent) |
| Stage Dimensions | 55 mm to 305 mm square |
| Temperature Resolution | 0.01 °C |
| Stability | ±0.05 °C (>25 °C), ±0.1 °C (<25 °C) |
| Uniformity | ±0.1 °C/cm (local, >25 °C), ±2% full-stage (≤25 °C) |
| Control | 100 Ω Pt RTD with PID + LVDC noise-reduction power supply |
| Cooling | Recirculating water base cooling |
| Atmosphere Options | Inert gas purge or vacuum compatibility |
| Software Interface | Programmable temperature ramps, multi-step profiles, real-time curve logging, SDK available for custom integration |
| Compliance | Designed for GLP/GMP-adjacent optical and materials characterization workflows |
| Brand | Instec |
|---|---|
| Origin | USA |
| Manufacturer Status | Authorized Distributor |
| Origin Category | Imported |
| Model | HCP Series |
| Temperature Range | −190 °C to +600 °C |
| Platform Size Options | 55 mm, 105 mm, 157 mm, 208 mm, 305 mm (square) |
| Temperature Stability | ±0.05 °C (>25 °C), ±0.1 °C (<25 °C) |
| Temperature Uniformity | ±0.1 °C/cm (local, >25 °C), ±2% full-platform (≥25 °C) |
| Temperature Resolution | 0.001 °C |
| Control Sensor | 100 Ω Pt RTD |
| Control Method | PID with LVDC noise-reduction power supply |
| Cooling | Recirculating water base cooling |
| Atmosphere | Standard open configuration |
| Software Interface | SDK-supported programmable control with ramp/soak profiling and real-time curve logging |
| Brand | Instec |
|---|---|
| Origin | USA |
| Model | HCP Series (Square Stage, 50–300 mm) |
| Temperature Range | –120 °C to +600 °C (model-dependent) |
| Stage Materials | Standard Al₂O₃ |
| Atmosphere Control | N₂/Ar purging standard |
| Cooling | Recirculating water-cooled base |
| Sensor/Control | 100 Ω Pt RTD with PID + LVDC noise-reduction power supply |
| Temp. Resolution | 0.01 °C |
| Stability | ±0.05 °C (>25 °C), ±0.1 °C (<25 °C) |
| Uniformity | ±0.1 °C/cm (local, >25 °C), ±0.3 °C/cm (local, <25 °C) |
| Software | Programmable ramp/soak profiles, real-time curve logging, SDK available |
| Mounting | Bench-top compatible with standard optical platform adapters |
| Optional Accessories | External handles, electrical feedthroughs, vacuum-rated observation window |