Optical Laboratory Equipment
Filter
Showing 2321–2336 of 4289 results
| Brand | MiXran |
|---|---|
| Model | Meg1131 |
| Material | Calcium Fluoride (CaF₂) |
| Lens Type | Positive Meniscus |
| Coating Options | Uncoated or IR1 Broadband Anti-Reflection Coating (Rₐᵥg < 1.5% @ 3–5 µm) |
| Diameter | 12.7 mm & 25.4 mm |
| Focal Length (EFL) | 20–500 mm |
| Surface Quality | 60–40 scratch-dig |
| Surface Flatness | λ/4 @ 633 nm |
| Transmission Range | 0.18–8.0 µm |
| Refractive Index @ 5 µm | ~1.39 |
| dn/dT | –1.1 × 10⁻⁶ /°C |
| Clear Aperture | ≥90% of diameter |
| Center Thickness (Tc) | 2.4–43.6 mm |
| Edge Thickness (Te) | 1.45–43.5 mm |
| Back Focal Length (BFL) | 16.3–495.4 mm |
| Radius of Curvature R₁ & R₂ | specified per configuration |
| Compliance | ISO 10110-1, ISO 10110-3, MIL-PRF-13830B |
| Brand | MiXran |
|---|---|
| Model | Meg1132 |
| Filter Type | Bandpass Interference Filter |
| Center Wavelength (CWL) | 340–1550 nm (multiple standard options) |
| Full Width at Half Maximum (FWHM) | 10 nm ± 0.5 nm |
| Peak Transmission (T<sub>max</sub>) | ≥30% to ≥75%, depending on CWL and variant |
| Substrate | Optical-grade fused silica or BK7 (customizable) |
| Surface Quality | 60-40 scratch-dig |
| Parallelism | <3 arcsec |
| Clear Aperture | ≥90% of diameter |
| Diameter Options | 12.7 mm (½″) and 25.4 mm (1″) |
| Thickness | 3.0 mm (standard), customizable |
| Mounting | Unmounted (optical component) |
| Brand | MiXran |
|---|---|
| Model | Meg1133 |
| Component Type | Optical Filter |
| Diameter Options | 12.7 mm & 25.4 mm |
| Center Wavelength Range | 214–2000 nm |
| FWHM Options | 13–75 nm |
| Center Wavelength Tolerance | ±2–±7 nm |
| FWHM Tolerance | ±2–±8 nm |
| Peak Transmission | 10–75% |
| Substrate Material | Optical-grade fused silica or BK7 (application-optimized) |
| Surface Quality | 60-40 scratch-dig |
| Parallelism | <3 arcsec |
| Clear Aperture | ≥90% of diameter |
| Operating Temperature Range | –20 °C to +70 °C |
| Damage Threshold | >500 mJ/cm² @ 10 ns, 10 Hz, 1064 nm |
| Brand | MiXran |
|---|---|
| Model | Meg1134 |
| Type | Zero-Order Quarter-Wave Plate (λ/4) |
| Construction | Air-Gap Retarder |
| Design Wavelengths | 257 nm to 1550 nm |
| Aperture | ≥8.0 mm (for Ø12.7 mm plates) or ≥15.0–18.0 mm (for Ø25.4 mm plates) |
| Thickness | 6.35 mm or 7.92 mm |
| Incident Angle | 0° |
| Surface Quality | λ/10 @ 633 nm |
| Wavefront Distortion | <λ/4 over clear aperture |
| Substrate Material | Fused Silica (UV-grade for ≤355 nm |
| Coating | Broadband AR coating (R<0.25% per surface, specified per wavelength band) |
| Damage Threshold | >5 J/cm² (10 ns, 10 Hz, 1064 nm) |
| Brand | MiXran |
|---|---|
| Model | Meg1135 |
| Type | Achromatic Quarter- and Half-Wave Plate |
| Diameter | 25.4 mm |
| Thickness | 6.35 mm |
| Clear Aperture | ≥18.0 mm |
| Incident Angle | 0° |
| Wavelength Ranges | VIS (450–650 nm), NIR (650–1100 nm), SWIR (900–2100 nm) |
| Retardation Accuracy | λ/150 (VIS/NIR), λ/50 (SWIR) |
| Surface Reflectivity | R < 0.5% (VIS/NIR), R < 0.75% (SWIR) |
| Coating | Broadband Anti-Reflection (AR) |
| Material | Fused Silica / MgF₂ / Crystal Quartz Composite Stack |
| Brand | MiXran |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Category | Imported Optical Instrument Component |
| Model | RELION VII CL |
| Component Type | Optical Instrument Module |
| Beam Voltage | 0–30 kV (continuously adjustable, typically operated ≤25 kV) |
| Beam Current | 0–2 mA (continuously adjustable, with overcurrent protection) |
| Vacuum Level | ≤0.25 Pa (ultimate), ~2.66 Pa (20 mTorr) typical operating pressure |
| Focusing Spot Size | Adjustable from defocused (several mm to >1 cm) to spot-focused (≤1 mm diameter) |
| Observation Window | 50 mm Ø lead-glass viewport (3 mm thick), plus optional 20 mm concave re-entrant window for high-magnification objectives |
| Sample Tray Dimensions | 100 × 60 × 20 mm |
| Power Supply | 220 V AC, 50–100 Hz |
| Max. Power Consumption | ≥800 W |
| Brand | MLOPTIC |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | Cylindrical Lens |
| Pricing | Upon Request |
| Component Type | Optical Element |
| Material Options | Schott, Ohara, Hoya, CDGM optical glasses |
| Max Diameter | 100 mm |
| Diameter Tolerance | +0/−0.01 mm |
| Surface Quality | 10–5 |
| Radius of Curvature | 5 mm to ∞ |
| Radius Tolerance | ±0.002 mm |
| Surface Figure Accuracy | λ/10 |
| Centering Error | ≤0.005 mm |
| Coating Options | Broadband AR, V-Coating, Custom Optical Coatings |
| Metrology | Zygo Interferometer with Computer-Generated Holography (CGH), Max Aperture φ95 mm, λ/10 verification |
| Brand | Modulight |
|---|---|
| Origin | Finland |
| Model | Tunable Broadband Light Source |
| Illumination Mode | External Illumination |
| Light Source Types | Xenon Lamp, Mercury Lamp |
| Compliance | CE, IEC 61000-6-3, IEC 61000-6-4 |
| Environmental Control | Integrated Hypoxia/O₂ Regulation (0.1–21% O₂) |
| Illumination Stations | Up to 4 configurable stations (e.g., 95 mm dish, 24/96/384/1536-well plates) |
| Wavelength Flexibility | Simultaneous multi-wavelength output (7 discrete channels, 350–850 nm range) |
| Control Interface | 10.1″ capacitive touchscreen + Modulight Cloud platform |
| Data Management | Audit-trail-enabled logging compliant with GLP/GMP principles |
| Software | MLControl v4.x with protocol scheduling, dose calibration (J/cm²), irradiance control (mW/cm²), and time-resolved exposure sequencing |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | THz Crystals |
| Price Range | USD 1,400 – 7,000 |
| Component Category | Nonlinear Optical Crystals |
| Brand | Moxi Photonics (microphotons) |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | MHPL-808-5-MM-B |
| Light Source Type | Diode Pump Laser |
| Illumination Mode | External Irradiation |
| Operating Wavelength | 793/808/976/915 nm |
| Wavelength Accuracy | ±3 nm (±10 nm for broader bands) |
| Spectral Width | 3 nm (FWHM, typical), 6 nm (max) |
| Operation Mode | CW |
| Output Power Options | 5 W, 10 W, 25 W (customizable) |
| Short-Term Stability (15 min) | ≤ ±0.02 dB (≈ ±0.5%) |
| Long-Term Stability (8 h) | ≤ ±0.05 dB (≈ ±1.2%) |
| Fiber Core/Clad | 105/125 μm multimode |
| Numerical Aperture | 0.22 |
| Fiber Termination | Bare Fiber (optional collimator) |
| Control Interface | Keypad + RS232 (DB9 Female optional) |
| Power Supply | 100–240 V AC (<120 W) or 12 V DC (<60 W) |
| Dimensions (Benchtop) | 260 × 320 × 120 mm (W×D×H) |
| Operating Temperature | −5 to +35 °C |
| Operating Humidity | 0–70% RH (non-condensing) |
| Brand | Microphotons |
|---|---|
| Origin | USA |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Imported Optical Component |
| Model | MP-732T/R-2.5-50-10M |
| Component Type | Electro-Optic Transducer Module |
| Operating Bandwidth | 10 MHz |
| Input Electrical Interface | SMA male |
| Output Optical Interface | FC/PC or FC/APC (configurable) |
| Wavelength Range | 1310 nm & 1550 nm dual-band compatible |
| Insertion Loss | ≤ 3.5 dB |
| Extinction Ratio | ≥ 20 dB |
| Polarization Extinction Ratio (PER) | ≥ 25 dB |
| RF Input Impedance | 50 Ω |
| Optical Power Handling | Up to +10 dBm |
| Operating Temperature | –5 °C to +70 °C |
| Storage Temperature | –40 °C to +85 °C |
| Brand | Microphotons |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Optical Component |
| Model | MP3821S |
| Pricing | Available Upon Request |
| Detector Material | Indium Gallium Arsenide (InGaAs) |
| Spectral Range | 0.9–1.7 µm |
| Array Format | 320 × 256 pixels |
| Pixel Pitch | 30 µm |
| Cooling | Thermoelectric (TE) cooled |
| Interface | Camera Link or GigE Vision (configurable) |
| Operating Temperature | −10 °C to +50 °C (housing), −40 °C detector operating temperature |
| Integration Time | 10 µs to 10 s (programmable) |
| Readout Noise | <150 e⁻ rms (typ.) |
| Full Well Capacity | >50 ke⁻ |
| Dynamic Range | >66 dB |
| Compliance | RoHS 2.0, CE, ISO 9001-certified manufacturing |
| Brand | MPB |
|---|---|
| Origin | Canada |
| Model | Nanosecond Pulsed Fiber Laser |
| Wavelength Options | 514, 532, 560, 620, 775, 1028, 1064, 1120, 1240, 1550 nm |
| Pulse Energy | 10–100 nJ |
| Pulse Duration | 0.5–4 ns |
| Repetition Rate | 20–40 MHz (custom rates available) |
| Average Power Stability | < 3% |
| Pulse-to-Pulse Stability | < 5% |
| Cooling | Air-cooled |
| Triggering | Internal or External TTL |
| Beam Quality (M²) | < 1.1 |
| Electrical Efficiency | > 25% |
| Safety Compliance | IEC 60825-1 Class 4 |
| Brand | MPB |
|---|---|
| Origin | Canada |
| Model | SFFA |
| Output Wavelength Range (NIR) | 1030–1342 nm |
| Max. NIR Output Power | 15 W (water-cooled), 8 W (air-cooled) |
| Output Wavelength Range (Visible, SHG option) | 515–670 nm |
| Max. Visible Output Power | 2 W |
| Polarization | Linear, polarization extinction ratio ≥ 98% |
| Beam Quality (M²) | < 1.1 |
| Transverse Mode | TEM₀₀ |
| Power Stability (APC, after 30-min warm-up) | ±2 %/hour |
| Cooling | Air-cooled standard |
| Pump Source | Polarization-maintaining Yb-doped fiber laser |
| Gain Medium | Polarization-maintaining single-mode Raman-active fiber |
| SHG Module | Optional, high-efficiency second-harmonic generation stage |
| Brand | MPB |
|---|---|
| Origin | Canada |
| Model | SFFL |
| Wavelength Options | 514 nm / 532 nm (visible) or 1028 nm / 1064 nm (NIR) |
| Output Power | up to 10 W (NIR), up to 1000 mW (visible) |
| Linewidth (FWHM) | 50–200 kHz |
| Long-Term Wavelength Stability | ±0.02 nm |
| Polarization Extinction Ratio | ≥98% |
| Relative Intensity Noise (RIN, 5 Hz–100 kHz) | ≤0.3% RMS (typ. 0.1%) |
| Power Drift (8 h) | ±2% |
| Coherence Length | >1 km (calculated from linewidth) |
| Cooling | Air-cooled, 2RU rack-mountable chassis |
| Safety | Interlocked enclosure with key switch |
| Brand | MRC |
|---|---|
| Origin | Germany |
| Model Series | PKS, PSH, P4S30 |
| Component Category | Optical Element |
| Vacuum Compatible | Yes |
| Max Aperture Support | 4-inch optics |
| Operating Laser Frequency Range | Low-frequency lasers |
| Signal Processing | Real-time analog |
| Power Supply | 12 V DC |
| ISO 13485 Certified | Yes |