Optical Laboratory Equipment
Filter
Showing 1665–1680 of 4288 results
| Brand | IXFiber |
|---|---|
| Origin | France |
| Product Type | Rare-Earth-Doped Double-Clad Active Fiber |
| Core NA | ≤ 0.12 |
| Cladding NA | 0.46 |
| Core Diameter | ~10–12 µm (single-mode at 1550 nm) |
| Cladding Shape | Octagonal (non-PM) / Circular (PM Panda-type) |
| Beat Length (PM) | < 2 mm |
| Background Loss (1550 nm) | < 50 dB/km |
| Power Conversion Efficiency (976 nm pump → 1550 nm signal) | > 40% |
| Proof Test Strength | 50 kpsi |
| Operating Wavelength Range | 1530–1565 nm (lasing/amplification) |
| Brand | IXFiber |
|---|---|
| Origin | France |
| Type | Specialty Optical Fiber |
| Core Application | Fiber Bragg Grating (FBG) Fabrication |
| Compliance | ITU-T G.652.D, IEC 60793-2-50 |
| Brand | Jenoptik |
|---|---|
| Origin | USA |
| Model | ALM Series Liquid Crystal Amplitude Modulator |
| Wavelength Range | 730–1600 nm |
| Aperture Options | Standard (custom apertures available) |
| Polarization Requirement | Requires polarized input or use with external polarizers |
| Optional Accessories | Thin-film polarizers (VIS), AR-coated variants |
| Compliance | CE, RoHS |
| Mounting | Standard SM1-threaded housing compatible with Thorlabs/Optomechanics platforms |
| Operating Temperature | 15–35 °C |
| Response Time | <20 ms (typical, dependent on drive voltage slew rate) |
| Brand | Jenoptik |
|---|---|
| Origin | USA |
| Model | GMP150 |
| Output Power Range | 0–150 W (1 W resolution) |
| Frequency Range | 2425–2475 MHz (±25 MHz tunable) |
| RF Ripple | <0.2% |
| Output Connector | Female N-type, 50 Ω |
| Cooling | Internal fan-cooled |
| Input Voltage | 110–230 VAC, 50/60 Hz |
| Remote Interface | RS232 |
| Protection | Reflected power limit (0–100 W adjustable) |
| Timer Range | 10 ms – 6000 s |
| Ramp & Overshoot Control | Yes |
| Warm-up Time | 0 s (instant operation) |
| Component Category | RF Source |
| Brand | Jenoptik |
|---|---|
| Origin | Germany |
| Model | Integrated Optical Amplitude Modulator |
| Substrate Material | MgO-doped LiNbO₃ |
| Operating Principle | Electro-optic (Pockels effect) in Ti-indiffused waveguide |
| Wavelength Range | 400–2000 nm (VIS to NIR/IR) |
| Modulation Bandwidth | DC to ≥10 GHz |
| Fiber Type | Polarization-maintaining single-mode fiber (PM-SMF) |
| Input/Output Coupling | FC/APC or custom connector options |
| Drive Voltage (Vπ) | Typically 3–6 V (depends on configuration) |
| Optical Power Handling | ≤500 mW (CW), higher for pulsed operation |
| Operating Temperature | 15–35 °C |
| Compliance | RoHS, CE |
| Brand | Jenoptik |
|---|---|
| Origin | Germany |
| Distribution Type | Authorized Distributor |
| Import Status | Imported |
| Model | Integrated Optical Modulator Driver |
| Component Category | Light Source Driver |
| Compliance | CE, RoHS |
| Operating Input | TTL-compatible logic signal (≥20 ns rise time) |
| Output Rise Time | ≤1 ns |
| Output Voltage Range | Adjustable, ±5 V typical |
| Output Impedance | 50 Ω matched |
| Application Interface | SMA or LEMO connectors (configurable) |
| Brand | Jenoptik |
|---|---|
| Origin | Germany |
| Model | Integrated Optical Phase Modulator |
| Substrate Material | MgO:LiNbO₃ / LiNbO₃ |
| Operating Wavelength Range | 400–2000 nm (Visible to IR) |
| Modulation Bandwidth | DC to >1 GHz |
| Fiber Coupling | Polarization-Maintaining Single-Mode Fiber (PM-SMF) |
| RF Input | SMA or K-type connector |
| Half-Wave Voltage (Vπ) | Typically 3–6 V (depends on design & wavelength) |
| Optical Damage Threshold | >500 mW (CW), >1 MW/cm² (pulsed) |
| Operating Temperature | 15–35 °C |
| Compliance | RoHS, CE |
| Brand | Jenoptik |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | PLM Series Liquid Crystal Phase Modulator |
| Component Category | Optical Modulator (Not Light Source) |
| Key Optical Function | Voltage-Controlled Birefringence-Based Phase Delay Tuning |
| Brand | Jenoptik |
|---|---|
| Origin | Germany |
| Model | SLM-S320(d)/640(d) |
| Technology | Nematic Liquid Crystal-Based Phase Modulator |
| Wavelength Range | 430–1600 nm |
| Configuration Options | Single-Layer (phase OR amplitude/polarization modulation) / Dual-Layer (simultaneous phase & amplitude modulation) |
| Active Area | Large-aperture design for high-power laser compatibility |
| Control Interfaces | LabVIEW VIs, MATLAB Toolbox, C/C++ API |
| Mounting Options | Reflective mode with optional backside mirror |
| AR Coating | Customizable broadband anti-reflection coating |
| Brand | AOE Tech |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | JF OA-M |
| Price Range | USD 140 – 420 (FOB) |
| Component Category | Optical Element |
| Off-Axis Angles | 15°, 30°, 45°, 60°, 90° |
| Clear Aperture Diameter | 25.4 mm, 50.8 mm, 76.2 mm, 101.6 mm |
| Diameter Tolerance | +0.00 / −0.38 mm |
| Focal Length Tolerance | ±1% |
| Surface Figure (RMS) | ≤1λ @ 632.8 nm |
| Parent Focal Length (PFL) | 12.7 mm, 25.4 mm, 38.1 mm, 50.8 mm, 76.2 mm, 101.6 mm |
| Effective Focal Length (EFL) | 25.4 mm, 50.8 mm, 76.2 mm, 101.6 mm, 127 mm, 152.4 mm, 177.8 mm, 203.2 mm |
| Surface Roughness (RMS) | <175 Å |
| Substrate Material | Aluminum 6061-T6 |
| Coating Options | Protected Aluminum or Protected Gold |
| Spectral Range (Al) | 0.7–2 µm |
| Spectral Range (Au) | 0.7–20 µm |
| Application Wavelength Suitability | Not recommended for visible/UV low-scatter applications due to surface roughness |
| Origin | France |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | S100 |
| Price Range | USD 14,000 – 28,000 |
| Wafer Diameter | 76 mm (3″) |
| Minimum Die Size | 200 µm |
| Maximum Die Size | 10 mm × 10 mm |
| Wafer Thickness | ≥100 µm |
| Scribing Force Range | 3–50 gf (gram-force), motorized and programmable |
| Z-Axis Drive | Motorized, angle-adjustable |
| Diamond Blade | Adjustable tilt and rotational orientation |
| Tool Offset Calibration | Crosshair-aligned wafer stage |
| X/Y Positioning Resolution | 1 µm |
| Motion Control | Progressive joystick with fine-step increment |
| Optical Magnification | 1×–4× continuous zoom |
| Imaging System | 17″ TFT LCD monitor + high-definition color CCD camera |
| Illumination | Adjustable LED ring light |
| Scribing Speed (Y-axis) | 0.1–20 mm/sec, programmable |
| Scribe Length | User-defined, repeatable |
| Scribe Count per Program | Configurable |
| Break Mode | Operator-initiated or fully automated |
| Break Mechanism | Top-side polyester film + bottom-mounted mechanical cleaver |
| Film Handling | Removable, static-dissipative polyester tape |
| Alignment Method | Manual micrometer rotation (±90°), crosshair-based visual registration |
| Vacuum Requirement | 60% vacuum level |
| Compressed Air | 70 psi |
| Power Supply | 100–230 VAC, 50/60 Hz, 500 W |
| Dimensions (W×D×H) | 650 × 700 × 500 mm |
| Weight | 70 kg |
| Origin | Taiwan |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Regional Origin | Domestic (China Market) |
| Model | MMT40 |
| Price Range | USD 0.15–75.00 (per unit, component-level pricing) |
| Component Category | Precision Motion Component |
| Brand | Jiapeng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | BSZ-8 |
| Light Source Type | Mercury Lamp |
| Irradiation Mode | Internal Illumination |
| Sample Capacity | 8 positions |
| Quartz Reaction Tube Options | 30 mL or 50 mL (customizable up to 200 mL) |
| Quartz Cold Finger Dimensions | Φ70 × 380 mm |
| Stirring Speed Range | 0–1800 rpm (continuously adjustable) |
| Rotation Cycle per Tube | 1 s – 24 h (continuously adjustable) |
| Filter Configuration | 16 standard optical filters + 2 dedicated 8-position filter holders |
| Light Incidence Geometry | Perpendicular transmission through filters |
| Brand | Jiapeng |
|---|---|
| Origin | Shanghai, China |
| Model | GHX-IV |
| Light Source Type | Mercury Lamp |
| Irradiation Mode | Internal Illumination |
| Power Range | 100–1200 W (continuously adjustable) |
| Lamp Options | Mercury (300/500/1000 W), Xenon (300/500/1000 W), Metal Halide (500 W) |
| Sample Capacity | 8 parallel positions |
| Reaction Vessel Options | 250 / 500 / 1000 / 2000 / 3000 mL glass reactors |
| Quartz Tube Options | 30 mL or 50 mL |
| Filter Configuration | 16 UV/optical bandpass filters, dual 8-position filter holders |
| Cooling | Dual-layer quartz cold well (Φ70 × 380 mm), low-temperature circulating chiller (–20 °C to 100 °C, >1000 W cooling capacity) |
| Stirring | Magnetic stirring, 0–1800 rpm (8-channel synchronized), temperature control up to 300 °C |
| Timer | 0–999 min (digital microprocessor controller) |
| Safety | Radiation-shielded dark chamber with UV-blocking insertable shutter, hinged observation window, ventilation ports, and integrated cooling fan |
| Brand | Jiapeng |
|---|---|
| Origin | Shanghai, China |
| Model | GHX-V |
| Light Source Type | Mercury Lamp |
| Irradiation Mode | Internal Illumination |
| Power Control Range | 100–1200 W (continuously adjustable) |
| Lamp Options | 300/500/1000 W Mercury Lamp (selectable), 300/500/1000 W Xenon Lamp (selectable), 500 W Metal Halide Lamp |
| Sample Capacity | 8 parallel positions |
| Quartz Tube Volume | 30 mL or 50 mL (customizable) |
| Quartz Cold Finger | Φ70 × 380 mm |
| Reaction Vessel Options | 250 / 500 / 1000 / 2000 / 3000 mL |
| Filter Wheel | 16-position, dual 8-slot filter holder |
| Filter Transmission Geometry | Perpendicular incidence |
| Stirring Speed (per tube) | 0–1800 rpm (stepless) |
| Rotation Period per Tube | 0–9999 s (stepless) |
| Magnetic Stirrer Temp. Range | Ambient to 300 °C |
| Timer Range | Up to 999 min |
| Cryogenic Circulator | Cooling Capacity >1000 W, Temp. Control Range: −20 to 100 °C |
| Brand | Jingfei Technology |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | OEM Manufacturer |
| Product Origin | Domestic (China) |
| Model | FLE1001 |
| Light Source Type | Deuterium–Tungsten Hybrid Source |
| Illumination Mode | External Illumination |
| Wavelength Range | 190–1100 nm |
| Output Power | 10 W (Deuterium), 10 W (Tungsten) |
| Intensity Stability | ±0.3% over 30 min |
| Lamp Lifetime | >1000 h |
| Optical Interface | SMA905 |
| Warm-up Time | 20 min |