THINKY UG Ointment Jar (Non-Sterile), 12 mL, Model Series 3-52, Pack of 100
| Brand | TAMASAKI (Kyoto) |
|---|---|
| Origin | Japan |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | 12 mL, Series 3-52, 100 pcs/box |
| Capacity | 12 mL |
| Material | Polypropylene (PP) |
| Color | White |
| Packaging Dimensions | 195 × 195 × 85 mm |
| Net Weight per Box | 570 g |
| Sterilization Status | Non-sterile |
| Bottom Geometry | Rounded, Low-Residue Design |
Overview
The THINKY UG Ointment Jar (Non-Sterile) is a precision-engineered single-use container designed for accurate dispensing, homogenization, and temporary storage of semi-solid formulations—including ointments, creams, gels, pastes, and viscous suspensions—in laboratory and pilot-scale R&D environments. Though categorized under auxiliary instrumentation due to its integral role in sample preparation workflows for rheological, viscometric, and stability testing systems (e.g., THINKY MIXER-100 or ARE-310), this jar is not an electronic device itself but a purpose-built consumable engineered to interface seamlessly with automated mixing, degassing, and dispensing platforms. Its rounded bottom geometry minimizes residual retention—critical for quantitative transfer and reproducible dosing—while the medical-grade polypropylene (PP) construction ensures chemical resistance to common solvents, surfactants, and active pharmaceutical ingredients (APIs). Manufactured in Japan under strict ISO 9001-certified processes, each batch undergoes dimensional consistency verification and material traceability documentation, supporting GLP-compliant recordkeeping in regulated development labs.
Key Features
- Rounded-bottom design reduces residual volume to <0.5% of nominal capacity—enabling high-yield recovery during pipetting or automated aspiration.
- Medical-grade polypropylene (PP) meets USP Class VI requirements for biocompatibility and exhibits excellent resistance to hydrolysis, acids, alkalis, and aliphatic hydrocarbons.
- Uniform wall thickness and tight dimensional tolerances (±0.3 mm) ensure consistent fitment in THINKY centrifugal mixers, vacuum degassers, and robotic liquid handlers.
- Opaque white PP formulation provides UV shielding for light-sensitive compounds without compromising mold-release performance during high-shear mixing.
- Stackable, nestable configuration enables efficient storage and automated pick-and-place handling; compatible with standard 96-well footprint logistics systems.
Sample Compatibility & Compliance
This jar is validated for use with water-based emulsions, silicone-based ointments, petrolatum derivatives, and polymer-thickened gels (e.g., carbomer, hydroxyethyl cellulose). It is not intended for autoclaving or gamma irradiation; non-sterile status requires end-user sterilization (e.g., ethylene oxide or vaporized hydrogen peroxide) if used in aseptic processing. The PP resin complies with FDA 21 CFR §177.1520 for repeated-use food-contact applications and EU Regulation (EC) No. 1935/2004 for food contact materials. While not pre-sterilized, the manufacturing environment adheres to ISO 14644-1 Class 8 cleanroom standards, and particulate shedding is controlled to <50 particles ≥5 µm per jar (tested per ISO 14644-1 Annex B).
Software & Data Management
As a passive consumable, the UG jar does not integrate with software or firmware. However, its standardized dimensions and barcode-ready labeling surface support integration into LIMS (Laboratory Information Management Systems) and MES (Manufacturing Execution Systems) via third-party label printers (e.g., Zebra ZT410) and scanning modules. Batch-specific lot numbers and manufacturing dates are laser-etched on each box for full traceability—enabling audit-ready linkage to raw material certificates of analysis (CoA), sterilization logs (if post-processing applied), and stability study records. This traceability architecture aligns with ALCOA+ principles (Attributable, Legible, Contemporaneous, Original, Accurate, Complete, Consistent, Enduring, Available) required under FDA 21 CFR Part 11 and EU Annex 11.
Applications
- Pre-formulation screening of topical drug delivery systems in pharmaceutical development labs.
- Viscosity profiling and rheological characterization of semi-solids using rotational or oscillatory rheometers (e.g., TA Instruments AR-Series, Anton Paar MCR).
- Homogenization and deaeration of dental composites, adhesives, and sealants prior to mechanical testing.
- Stability studies under ICH Q1A–Q1E conditions, including freeze-thaw cycling and accelerated aging protocols.
- QC release testing of over-the-counter (OTC) dermatological products per USP <915> and Ph. Eur. 2.9.35.
FAQ
Is this jar suitable for autoclaving?
No. The polypropylene construction is not rated for steam sterilization at 121°C. Autoclaving may cause deformation, loss of dimensional integrity, or leachable formation. Sterilize only via EO gas or VHP if required.
Can these jars be used with THINKY ARE-250 vacuum degassers?
Yes. The 3-52 series dimensions and rim geometry are mechanically compatible with the ARE-250’s chuck system and vacuum-sealing interface.
What is the maximum recommended centrifugal force for mixing?
For optimal performance and minimal creep deformation, limit rotational speeds to ≤3,000 rpm when used with THINKY MIXER-100 or equivalent platforms.
Do you provide material safety data sheets (MSDS/SDS) for the PP resin?
Yes. SDS documentation compliant with GHS Rev. 10 is available upon request and includes extractables profiling per USP <661.1>.
Are custom labeling or barcoding services available?
Yes. OEM labeling—including GS1-128 barcodes, QR codes with batch metadata, and multilingual regulatory text—can be arranged through authorized TAMASAKI distributors.
