Laser Confocal Microscope
Filter
Showing 1–30 of 78 results
| Brand | Abner |
|---|---|
| Origin | Jiangsu, China |
| Model | ABN-3DLCM-001 |
| Instrument Type | Point-Scanning Confocal Microscope |
| Resolution (X-Y) | ≤200 nm |
| Resolution (Z) | ≤500 nm |
| Laser Sources | Optional Multi-Wavelength Lasers |
| Detectors | PMT or Multi-Channel Photon Counting Detectors |
| Fluorescence Detection | PMT or Multi-Channel Photon Counting Detectors |
| Scanning Mode | XYZ |
| Objective Lenses | 10×, 20×, 50×, 100× |
| Host Computer | Lenovo Workstation |
| Software & Image Workstation | Fully Integrated Automatic Control |
| XY Stage Control | Motorized and Manual Options |
| Brand | Abner |
|---|---|
| Origin | Jiangsu, China |
| Model | ABN-CRM-001 |
| Instrument Type | Point-Scanning Confocal Microscope |
| Lasers | Standard integrated 445 nm, 532 nm, and 633 nm diode lasers |
| Detector | EMCCD sensor with 1600 × 200 or 1600 × 400 pixel array |
| Scanning Module | High-resolution Nikon CCD camera for real-time image display and digital storage |
| Focusing Mechanism | Precise manual adjustment of eyepiece and objective lens to locate micron-scale samples and visually confirm laser focus position on target particles |
| Brand | Agilent Technologies |
|---|---|
| Origin | USA |
| Manufacturer | Agilent Technologies |
| Import Status | Imported |
| Model | Cytation C10 |
| Resolution | 16-bit |
| Laser Sources | 6-color solid-state lasers |
| Fluorescence Detector | Hamamatsu ORCA-fusion BT sCMOS camera |
| Confocal Module | Spinning-disk confocal |
| Scanning Mode | XYZ motorized stage |
| Optical Zoom | 1.25×–60× |
| Microscope Host | Agilent BioTek |
| Excitation Source | 1000 mW laser system |
| Software & Workstation | Gen5 v3.11+ |
| Vibration-Isolation Platform | 49 cm × 71 cm dedicated optical table |
| Brand | Airy |
|---|---|
| Origin | Beijing, China |
| Model | Nova-SD |
| Lateral Resolution | ~230 nm (theoretical limit: 120 nm) |
| Axial Resolution | ~600 nm (theoretical limit: 450 nm) |
| Laser Lines | 405 nm (1000 mW), 450 nm (1000 mW), 488 nm (1000 mW), 520 nm (1000 mW), 561 nm (1000 mW), 640 nm (1000 mW), 750 nm (1000 mW) |
| Detector Type | Scientific CMOS or EMCCD camera (customizable) |
| Spindle Speed | 7500 RPM |
| Frame Rate | up to 2000 fps (at reduced ROI) |
| Objective | 100× oil immersion (NA ≥ 1.4) |
| Compatible Microscope Frames | Nikon Ti2-E, Olympus IX83, Leica DMi8 |
| Illumination Sources | Same multi-wavelength laser set as excitation |
| Software & Image Workstation | Integrated acquisition and analysis suite |
| Vibration-Isolated Optical Table | Included |
| XY Stage Control | Motorized, precision piezo or stepper-driven |
| Brand | Oxford Instruments |
|---|---|
| Origin | United Kingdom |
| Model | BC43 SR |
| Pixel Size | 6.5 µm |
| Resolution | 2040 × 1992 (4.1 MP) |
| Excitation Lasers | 405 nm, 488 nm, 561 nm, 639 nm |
| Scanning Mode | XYZ |
| Objective Lenses | 10×, 20×, 40×, 60×, 100× |
| Software & Workstation | Imaris image analysis software |
| Vibration Isolation | Integrated active/passive damping platform |
| XY Stage Control | Motorized |
| Brand | Oxford Instruments |
|---|---|
| Origin | United Kingdom |
| Model | Andor Dragonfly |
| Software | Imaris (3D/4D image analysis), Fusion (acquisition & processing) |
| Imaging Modes | Laser Scanning Confocal, Widefield + GPU-Accelerated Deconvolution (ClearView-GPU™), TIRF (chromatically corrected), HILO, SRRF-Stream®, dSTORM, Iterative Deconvolution |
| Max Frame Rate | 400 fps (Dragonfly 200 series) |
| Detector Compatibility | EMCCD and sCMOS cameras |
| Core Technology | Microlens-based parallel confocal scanning head with Borealis™ uniform illumination |
| Brand | attocube Systems AG |
|---|---|
| Origin | Germany |
| Model | attoCFM I |
| Instrument Type | Point-Scanning Confocal Microscope |
| Temperature Range | 1.8 K – 300 K |
| Magnetic Field | Up to 12 T (vector magnet optional) |
| Vacuum Range | 1×10⁻⁶ mbar – 1 atm |
| Numerical Aperture (NA) | 0.82 |
| Optical Resolution | ~550 nm (@635 nm) |
| Coarse Sample Positioning | 5 × 5 × 5 mm³ |
| Fine Scan Range | 30 × 30 µm² @ 4 K |
| Working Distance | 0.7 mm |
| Compatible Cryostats | attoDRY1000/2100, Quantum Design PPMS (1" & 2" bore) |
| Brand | TOYO Corporation (Japan) |
|---|---|
| Origin | Japan |
| Model | ECCS B320 |
| Instrument Type | Point-Scanning Confocal Microscope |
| Distribution Channel | Authorized Import Distributor |
| Country of Manufacture | Japan |
| Compliance | CE, ISO 9001-certified supply chain |
| Brand | Evident (formerly Olympus) |
|---|---|
| Origin | Japan |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Import Status | Imported |
| Model | FLUOVIEW FV5000 |
| Instrument Type | Point-Scanning Confocal Microscope |
| Lasers | Visible lasers at 405, 445, 488, 514, 561, 594, and 640 nm |
| Detectors | SilVIR (Silicon-based Vacuum-Insulated Photodiode Array) detectors |
| Scan Module | Monolithic integrated scan unit |
| Scanning Modes | Galvo-galvo, resonant, hybrid, and line-scan configurations |
| Objective Compatibility | Wide range of high-NA research-grade objectives (e.g., UPLSAPO, LUCPLFLN, XLPLN, and water-immersion variants) |
| Microscope Frame | Fully automated inverted research-grade microscope platform with motorized Z-focus, filter turrets, and stage control |
| Software & Workstation | FV31S-SW intelligent acquisition software with AI-assisted parameter optimization, spectral unmixing, and quantitative intensity calibration |
| Vibration Isolation | Optional dedicated active or passive anti-vibration optical tables (e.g., Newport RS series or TMC Micro-g platforms) |
| Brand | Evident (formerly Olympus) |
|---|---|
| Origin | Japan |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Origin | Imported |
| Model | IXplore IX85 SpinSR |
| Scanning Modes | Multi-mode spinning disk, resonant scanner, and optional point-scanning compatibility |
| Objective Options | Wide selection of high-NA objectives including UPLXAPO 100×/1.50 oil immersion objective |
| Brand | ISS |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Alba-STED |
| Price | USD 680,000 (FOB New York) |
| Brand | ISS |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported Instrument |
| Model | FLIM/FFS Upgrade Kits |
| Instrument Type | Point-Scanning Confocal Microscope |
| Time Resolution | 1 ps |
| Acquisition Range | 100 ps – 100 ms |
| Detection Channels | 8 |
| Channel Bandwidth | 65 MHz/channel |
| Detector Configuration | NDD-based Two-Photon Detection |
| Supported Platforms | Leica TCS SP8, Nikon A1/C2, Olympus FV1000/FV1200/FV3000/FVMPE-RS, Zeiss LSM 710/LSM 780 |
| Brand | ISS |
|---|---|
| Origin | USA |
| Model | Q2 |
| Instrument Type | Point-Scanning Confocal Microscope |
| Resolution | 1×1 to 4096×4096 pixels |
| Excitation Sources | 266 nm, 355 nm, 405 nm lasers, white-light supercontinuum laser, two-photon laser |
| Detectors | High-speed hybrid detectors, extended-Infrared avalanche photodiodes (eIR-APDs), cryogenically cooled sCMOS spectrometers |
| Scanning Modules | 2D galvanometric mirrors, piezo Z-stage, closed-loop motorized XY stage |
| Scanning Mode | Galvo-based XY scanning + piezo-driven Z-axis scanning |
| Optical Zoom | 0.25×–2.5× |
| Microscope Host | Upright or inverted configuration |
| Illumination | Tungsten-halogen lamp or white LED |
| Software Suite | Dedicated FLIM acquisition software with Phasor Plot analysis module |
| Vibration Isolation Platform | 1200 mm × 1500 mm optical table |
| Brand | ISS |
|---|---|
| Origin | USA |
| Model | Q2 |
| Fluorescence Lifetime Range | 100 ps – 100 ms |
| Time Resolution | ≤1 ps |
| Counting Rate | 65 MHz/channel |
| Detection Channels | up to 8 |
| Scan Mode | Galvo-based XY scanning (5 kHz) with closed-loop motorized stage |
| Spatial Resolution | configurable from 1×1 to 4096×4096 pixels |
| Frame Rate | up to 20 fps @ 256×256 |
| Spectral Range (detection) | 350–1100 nm & 900–1700 nm |
| Excitation Options | UV–Vis–NIR lasers, supercontinuum source, single- or two-photon excitation |
| Temperature Control | 77 K – 500 K |
| Compliance | GLP/GMP-ready data audit trail, FDA 21 CFR Part 11–compatible software architecture |
| Brand | ISS |
|---|---|
| Origin | USA |
| Model | SMT-3D Nanoimaging |
| Category | Upgraded Add-on for Olympus FV1000/FV1200 Laser Scanning Confocal Microscopes |
| Detection Principle | Modulation Tracking via Feedback-Controlled Circular Beam Oscillation |
| Lateral Resolution | 20–40 nm (±2 nm) |
| Axial Precision | 2 nm |
| XY Tracking | Galvo Mirror System |
| Z Tracking | Piezo-Driven Stage |
| Data Acquisition Rate | 32–256 kHz |
| Orbit Frequency | 2 kHz |
| Detector | Internal PMT of FV1000/FV1200 + ISS Photon Counting Unit |
| Software | SimFCS (Globals Unlimited) |
| Compliance | Designed for GLP/GMP-aligned workflows |
| Brand | KEYENCE |
|---|---|
| Origin | Japan |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Import Status | Imported |
| Model | VK-X |
| Resolution | 0.01 nm |
| Laser Sources | Semiconductor lasers at 404 nm and 661 nm |
| Detector | 16-bit photomultiplier tube (PMT) |
| Scanning Module | Point-source laser scanned via X-Y galvanometric optical system |
| Scanning Modes | Laser confocal, focus variation, white-light interferometry, spectral interferometry |
| Maximum Scan Speed | 125 Hz (area), 7900 Hz (line) |
| Objective Lenses | 2.5×, 5×, 10×, 20×, 50×, 100× |
| Illumination Source | Short-wavelength laser illumination |
| XY Stage Control | Motorized and manual operation |
| Brand | KLA |
|---|---|
| Model | Zeta 20 |
| Origin | China (Guangdong) |
| Manufacturer Type | Authorized Distributor |
| Product Origin Classification | Domestic |
| Price | USD 98,000 (FOB Guangdong) |
| Measurement Principle | Multi-Mode Optical Interferometry & ZDot™ Confocal Imaging |
| Max. Vertical Range | >10 mm |
| Vertical Resolution | Sub-nanometer (typ.) |
| Lateral Resolution | ≤ 0.4 µm |
| Film Thickness Range | 1 nm – 50 µm (with integrated broadband reflectometry) |
| Sample Stage | Motorized XYZ with 100 mm × 100 mm travel |
| Software Platform | ZetaWare v6.x |
| Compliance | ISO 25178-2, ASTM E2981, SEMI S2/S8, GLP/GMP-ready audit trail |
| Brand | Lasertec |
|---|---|
| Origin | Japan |
| Model | ECCS B320 |
| Instrument Type | Point-Scanning Confocal Microscope |
| Light Source | Xenon Lamp + White-Light Laser Source |
| Detector | High-Sensitivity Photomultiplier Detector |
| Scanning Module | Integrated Scanner-Microscope Architecture |
| Scanning Mode | XYZ Triaxial Scanning |
| Objective Lenses | 10× to 100× (Selectable) |
| Software & Workstation | Operando Imaging Suite |
| Brand | Lasertec |
|---|---|
| Origin | Japan |
| Model | HYBRID L7 |
| Type | Laser Scanning Confocal Microscope with Hybrid Optical & Interferometric Detection |
| Application Domain | Semiconductor Process Metrology, 3D Surface Topography, Thin-Film Thickness Measurement, Microstructure Inspection |
| Brand | Lasertec |
|---|---|
| Origin | Japan |
| Model | HYBRID+ |
| Instrument Type | Point-Scanning Confocal Microscope |
| Vertical Resolution | 0.05 nm |
| Laser Source | 405 nm semiconductor laser |
| LED Light Source | White LED & Xenon lamp |
| Scan Modes | White-light confocal, laser confocal, differential interference contrast (DIC), vertical white-light interferometry (VWLI), phase-shift interferometry (PSI), spectral reflectometric thin-film metrology |
| Scan Axes | XYZ |
| Objective Magnification Range | 1×–150× |
| Optical Platform | Hybrid dual-confocal architecture |
| Vibration-Isolation Table | 1200 × 900 mm dedicated anti-vibration platform |
| Compliance | ASTM E2927, ISO 25178-2, ISO 10110-7, JIS B 0601, USP <1059>, FDA 21 CFR Part 11 (software audit trail enabled) |
| Brand | Lasertec |
|---|---|
| Origin | Japan |
| Instrument Type | Point-Scanning Confocal Microscope |
| Vertical Resolution | 0.05 nm |
| Laser Source | 405 nm Semiconductor Laser |
| Detector | High-Sensitivity Photodetector |
| Scanning Module | Integrated Scanner-Microscope Architecture |
| Scanning Axes | XYZ |
| Maximum Scan Rate | 120 Hz |
| Optical Zoom | 0.1× Continuous Zoom |
| Objective Lenses | 10× to 150× |
| Microscope Illumination | White Light + Six Discrete Wavelengths (Selectable) |
| Software Platform | LM Eye, LIBRA, LM Inspect |
| Vibration Isolation Table | 1200 × 900 mm Dedicated Anti-Vibration Platform |
| XY Stage Control | Motorized or Manual Selection |
| Brand | Leica |
|---|---|
| Origin | Germany |
| Model | Leica LMD7 |
| Laser Wavelength | 349 nm |
| Pulse Repetition Rate | 10–5000 Hz |
| Pulse Duration | < 4 ns |
| Maximum Pulse Energy | 120 µJ |
| Optical Path | Beam-Steering via Precision Prisms (No Sample Movement) |
| Collection Method | Gravity-Based, Contact-Free, Contamination-Free |
| Objective Compatibility | 10 Dry Objectives (5×–150×), Including SmartCut™ Series with UV Transmission Down to 350 nm |
| Illumination | LED (25,000 h lifetime, constant CCT) or Halogen (with CCIC) |
| Software Platform | Leica Application Suite (LAS) X v7.6 with AVC, Time-Lapse Imaging, and Workflow-Optimized Dissection Tools |
| Brand | Leica |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | MICA Widefield-Confocal |
| Instrument Type | Point-Scanning Confocal Microscope |
| Lasers | 405 nm, 488 nm, 561 nm, 638 nm |
| Fluorescence Detectors | Standard configuration with four HyD detectors and four sCMOS cameras |
| Optical Zoom | 1–6× |
| Microscope Host | Fully motorized inverted fluorescence microscope |
| Illumination Sources | Laser + LED |
| Software & Workstation | Intuitive GUI with integrated Pixel Classifier AI module |
| Vibration Isolation | Passive anti-vibration table |
| Brand | Leica |
|---|---|
| Origin | Germany |
| Model | Leica SD AF |
| Configuration | Import (OEM-manufactured in Germany) |
| Software Platform | Leica MM AF |
| Core Technology | Yokogawa CSU-X1 Spinning Disk Unit Integrated with Leica Optical Path and Adaptive Focus Control |
| Brand | Leica |
|---|---|
| Origin | Germany |
| Model | Leica SR GSD |
| Laser Wavelengths | 405 nm, 488 nm, 532 nm, 642 nm |
| Laser Power | 300–1000 mW per line |
| Lateral Drift Stability | <20 nm / 10 min (SuMo Piezo Stage) |
| Resolution (GSDIM mode) | ≤20 nm (lateral) |
| Compatible Fluorophores | Alexa Fluor® 488/532/546/647, Rhodamine-6G, Atto 488/532/565/568, YFP, EYFP |
| Imaging Modes | Widefield, TIRF, High-Speed Multichannel Fluorescence, Temperature-Controlled Live-Cell Imaging |
| Base Platform | Leica DMI6000 B Inverted Microscope with AM TIRF MC System |
| Brand | Leica |
|---|---|
| Origin | Germany |
| Model | STELLARIS 8 DIVE |
| Instrument Type | Point-Scanning Confocal Microscope |
| Excitation Range | Up to 1300 nm |
| Detection Range | 380–800 nm (tunable via 4Tune spectral detector) |
| Core Technology | Tunable non-descanned spectral detection with variable beam expander (VBE) |
| Compliance | Designed for GLP/GMP-aligned workflows |
| Brand | Leica |
|---|---|
| Origin | Germany |
| Model | STELLARIS 8 FALCON |
| Imaging Modality | Time-Correlated Single-Photon Counting (TCSPC)-based Fluorescence Lifetime Imaging (FLIM) |
| Frame Rate | Up to 4 fps at 256 × 256 pixels |
| Spectral Channels | Simultaneous acquisition across up to 4 spectral detection channels or sequential acquisition across up to 10 channels |
| FLIM Analysis Modes | Biexponential decay fitting, phasor plot analysis, spectral-FLIM unmixing |
| Software Integration | Fully embedded in Leica LAS X NAVIGATOR and LAS X LITE platforms |
| Compliance | Designed for GLP/GMP-aligned workflows |
| Brand | Leica |
|---|---|
| Origin | Germany |
| Instrument Type | Point-Scanning Confocal Microscope |
| Model | STELLARIS |
| Detection Range | 410–850 nm |
| Excitation Source | White Light Laser (WLL), up to 8 simultaneous spectral lines |
| Detector Technology | Power HyD hybrid detectors |
| Core Capabilities | Fluorescence Lifetime Imaging (FLIM), TauSense-based functional contrast, AI-driven rare-event detection (Aivia), 3D optical sectioning, multi-modal integration (STED, DIVE, DLS, FALCON, CARS) |
| Brand | Leica |
|---|---|
| Origin | Germany |
| Model | STELLARIS CRS |
| Instrument Type | Point-Scanning Confocal Microscope |
| Excitation | Near-Infrared (NIR) Lasers |
| Imaging Modalities | Stimulated Raman Scattering (SRS), Coherent Anti-Stokes Raman Scattering (CARS), Multiphoton Fluorescence, Second Harmonic Generation (SHG), FLIM |
| Spatial Resolution | Subcellular (≤ 300 nm lateral, ≤ 1 µm axial) |
| Detection | Spectral Unmixing, TauSense Lifetime-Gated Acquisition |
| Software Platform | LAS X with ImageCompass Interface |
| Compliance | Designed for GLP/GMP-aligned workflows |
| Brand | Leica |
|---|---|
| Origin | Germany |
| Model | STELLARIS Cryo |
| Application Domain | Cryo-Correlative Light and Electron Microscopy (Cryo-CLEM) |
| Cooling Stage | Integrated Liquid Nitrogen–Cooled Stage with Transfer Shuttle |
| Software Platform | LAS X Coral Cryo (with TauSense, LIGHTNING, and Interpolated 3D Targeting) |
| Objective Lens | HC PL APO 50×/0.90 Cryo-Optimized Dry Objective |
| Detection System | Power HyD Hybrid Detectors |
| Light Source | White Light Laser (WLL, 470–670 nm) |
| Imaging Modes | Confocal Reflectance, Fluorescence, TauContrast, TauSeparation, Spectral Unmixing |
| Ice Thickness Assessment | Dual-mode (Overview + Confocal Reflectance Z-Stack) |
| Data Format | Open, Metadata-Rich TIFF & HDF5 (CF-1 compliant) |
| Regulatory Alignment | Designed for GLP/GMP-aligned workflows |