Other Industry Specialized Instruments
Filter
Showing 1–30 of 256 results
| Brand | A&D |
|---|---|
| Origin | Japan |
| Manufacturer | A&D Co., Ltd. |
| Type | Imported Instrument |
| Model | AD-3253 / AD-3253B |
| Thickness Range | 0.8–100 mm (AD-3253: 2–200 mm) |
| Accuracy | ±0.1 mm |
| Weight | 180 g |
| Power | Single AA alkaline battery |
| Battery Life | >30 h continuous operation (at 25°C, 5 mm steel sample) |
| Auto Power-Off | After 5 min idle |
| Display | Backlit LCD |
| Units | mm / inch selectable |
| Sound Velocity Input | Adjustable via keypad, stored non-volatile memory |
| Calibration | Single-point material calibration for velocity determination |
| Standard Accessories | Protective leather case, 5 mm calibration block, instruction manual, probe holder (AD-3252 only), dual probe (optional) |
| Brand | A&D |
|---|---|
| Model | AD-8127 |
| Printing Method | Impact Dot-Matrix |
| Character Format | 7×9 dots |
| Character Size | 1.6 mm (W) × 3.2 mm (H) |
| Print Speed | ~1.6 lines/sec |
| Paper Feed Speed | ~4 lines/sec |
| Characters per Line | 24 |
| Operating Temp. | 0–40 °C, 35–85% RH (non-condensing) |
| Storage Temp. | −20–60 °C, 10–90% RH (non-condensing) |
| Interface | RS-232C / Current Loop |
| Power Supply | AC Adapter AX-TB135 or AX-TB285 (Input: AC 100 V ±10% / −15%, 50/60 Hz) |
| Power Consumption | ~36 VA (incl. adapter) |
| Dimensions (W×D×H) | 174 × 141 × 87 mm |
| Weight | ~500 g |
| Standard Accessories | Ribbon cartridge, plain paper roll, AC adapter, identification label, user manual, RS-232C cable (D-Sub9P/D-Sub25P configurable) |
| Brand | AANDD |
|---|---|
| Model | LC4101-G600 |
| Rated Capacity | 6 N (611.8 g) |
| Deflection | 0.24 mm |
| Natural Frequency | 100 Hz |
| Allowable Moment | 0.212 N·m |
| Rated Output | 1.0197 mV/V (+15% / –0%) |
| Zero Balance | ±20% of RO |
| Input Resistance | ~400 Ω |
| Output Resistance | 350 ±5 Ω |
| Insulation Resistance | >500 MΩ @ DC 50 V |
| Temp. Compensation Range | –10 °C to +40 °C |
| Zero Temp. Effect | ±0.04 %RO / 10 °C |
| Output Temp. Effect | ±0.014 %FS / 10 °C (typ.) |
| Recommended Excitation | DC 5–12 V |
| Max. Excitation | DC 15 V |
| Overload Limit (Safe) | 300 %RC |
| Ultimate Overload | 400 %RC |
| Total Error | ±0.015 %RO |
| IP Rating | IP22 |
| Cable | Ø4 mm × 1.5 m (Red: +Exc, White: –Exc, Green: +Sig, Blue: –Sig, Yellow: Shield) |
| Housing Material | Aluminum |
| Dimensions | 300 × 300 mm |
| Mass | 0.12 kg |
| Brand | ABET Technologies |
|---|---|
| Origin | USA |
| Model | SUN3000 |
| Illumination Mode | Steady-State |
| Spectral Classification | IEC 60904-9, ASTM E927-19 & JIS C 8912 Class AAA |
| Irradiance Uniformity | ≤2% (over 110 × 110 mm) |
| Spectral Match (AM1.5G) | 0.75–1.25 |
| Short-Term Stability | ≤0.5% (1 h) |
| Long-Term Stability | ≤2% (8 h) |
| Output Aperture | 110 × 110 mm |
| Working Distance | 200 mm |
| Light Source | Ozone-Free Xenon Arc Lamp (550 W) |
| Lamp Lifetime | 1500 h |
| Cooling System | HEPA-Filtered Forced-Air |
| Photofeedback Control | Integrated |
| Shutter | Electronically Controlled with Digital Timer |
| Input Power | 110/240 VAC, 50/60 Hz, ≤10 A |
| Optional IV Measurement System | ReRa Tracer IV Software + Temperature-Controlled Vacuum Chuck Platform (4-wire, 0–10 A range, sample size 10 × 10 mm to 156 × 156 mm) |
| Brand | Abner |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | ABN-3AX |
| Spindle Power | 0.75 kW |
| Max Spindle Speed | 12,000 rpm |
| X/Y Axis Travel | 50 mm |
| Z Axis Travel | 150 mm |
| Worktable Size | 120 × 120 mm |
| Rotational Capability | 360° continuous indexing (manual or optional motorized) |
| Cooling System | Integrated mist coolant delivery |
| Drive System | Precision servo motors with closed-loop feedback |
| Brand | ADEV |
|---|---|
| Origin | Italy |
| Model | GY-2000 |
| Measurement Range | CH₄: 0–100% vol, CO₂: 0–50% vol, H₂S: 0–9999 ppm, O₂: 0–20% vol, pH: 0–14, Temperature: 0–100°C, Pressure: 0–100 kPa |
| Resolution | 0.01% (for gas vol%), ppm-level detection for H₂S |
| Response Time | ≤30 s |
| Detection Principles | Non-dispersive Infrared (NDIR) for CH₄/CO₂, Electrochemical for H₂S/O₂, Potentiometric for pH, RTD/Thermistor for T, Piezoresistive for P |
| Brand | Admesy |
|---|---|
| Origin | Netherlands |
| Model | Prometheus-2.1mm |
| Spot Size | 2.1 mm |
| Dynamic Range | Up to several million cd/m² (customizable) |
| Sampling Rate | Up to 3125 samples/sec (Y flicker mode) |
| CIE Standard Observer | 1931 2° |
| Compliance | USBTMC 1.0, IEEE 488.2 |
| Operating Systems | Windows, Linux (x86_64, i686, ARM), macOS |
| Software Integration | NI-VISA, LabVIEW, LabWindows CVI, Visual Studio |
| Detector Type | High-sensitivity, ultra-low-noise photodiode array |
| Features | Auto-ranging, mechanical shutter, integrated LED alignment pointer, JEITA-compliant flicker calculation engine |
| Filter Accuracy | Enhanced spectral match to CIE 1931 tristimulus curves vs. Hyperion series |
| Brand | ADOS |
|---|---|
| Origin | Germany |
| Model | Biogas 401 |
| Gas Measurement Principles | Electrochemical (O₂, H₂S), Non-Dispersive Infrared (NDIR) (CH₄, CO₂), Thermal Conductivity (H₂) |
| Measurement Ranges | O₂: 0–21 %vol |
| H₂S | 0–50 ppm / 0–5000 ppm (selectable) |
| CH₄ | 0–100 %vol |
| CO₂ | 0–50 %vol |
| H₂ | 0–2 %vol |
| Accuracy | < ±2 % FS |
| Response Time (T90) | ≤ 30 s (typ.) |
| Operating Temperature | +5 °C to +45 °C |
| Power Supply | 230 V AC, 50 Hz / 115 V AC, 60 Hz |
| Power Consumption | 100 VA |
| Dimensions (W×H×D) | 600 × 478 × 500 mm |
| Weight | ~61 kg |
| Output Interfaces | Dual 4–20 mA per channel (6 channels max), RS232/RS485 serial interface, 3 configurable alarm relays + 1 fault relay (230 V, 450 VA) |
| Sample Handling | Peltier-cooled condensate trap, peristaltic sampling pump, adjustable flow control, multi-stage particulate & moisture filtration |
| Brand | adphos |
|---|---|
| Origin | Germany |
| Model | PBT |
| Technology | Ultrafast NIR Thermal Processing |
| Wavelength Range | 800–1200 nm |
| Peak Power Density | Up to 100 MW/ft² (focused line geometry) |
| Substrate Compatibility | PET, PI, PVC, Paper, Foils, Flexible Polymers |
| Process Speed | Up to 300 m/min |
| Operating Mode | Continuous web or batch |
| Compliance | CE, RoHS, ISO 9001-certified manufacturing |
| Brand | AEMC |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported |
| Model | Model 6292 |
| Pricing | Available Upon Request |
| Key | Brand: AWT |
|---|---|
| Origin | United Kingdom |
| Distribution Type | Authorized Distributor |
| Import Status | Imported |
| Compliance Standard | EN 54-20 (Fire Detection and Alarm Systems – Smoke Detectors) |
| Brand | Aerospace |
|---|---|
| Origin | Beijing, China |
| Model | CRTA-2 |
| Compliance | GB 9779–2015, GB 14907–2002, JG/T 157–2009 |
| Airflow Velocity | 3.0 ± 0.3 m/s |
| Test Specimen Dimensions | 150 × 70 × (4–6) mm |
| Timer Range | 0–99 h 99 min |
| Sample Substrate | Asbestos-free fiber-cement board (JC/T 412.1–2006, NAF HV grade, 4–6 mm thick) |
| Wet Film Thickness (Primer) | 80 µm |
| Drying Interval (Primer) | 1–2 h (tack-free) |
| Application Sequence | Primer → Immediate application of intermediate coat → Wind-induced drying test |
| Origin | Yunnan, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | AGI-T3 |
| Pricing | Upon Request |
| Brand | AGUS |
|---|---|
| Origin | Japan |
| Model | SPS-2000 |
| Maximum Axial Pressure | 15–75 kN |
| Maximum Pulse Current | 1000–3000 A |
| Base Vacuum | ≤2 Pa (reached in ≤5 min from atmosphere) |
| Ultimate Vacuum (with optional high-vacuum pump) | ≤5×10⁻³ Pa |
| Chamber Accessibility | Enhanced ergonomic loading/unloading design |
| Architecture | Modular, field-upgradeable platform |
| Core Heating Mechanism | Unidirectional pulsed DC current through conductive die/mold assembly |
| Brand | AIRSENSE |
|---|---|
| Origin | Germany |
| Model | aerotracer |
| Detection Principle | Matrix-based Multi-Channel Mixed Sensor Array |
| Sample Flow Rate | 50–100 mL/min |
| Detection Time | < 60 seconds |
| Detectable Substances | Aviation Engine Lubricants, Hydraulic Fluids (e.g., MIL-PRF-83282/87257), De-icing Fluids (Type I/II/IV), Corrosion Inhibitors, Adhesives, Jet Fuel (Jet A/A-1) |
| Display | Graphical LCD Interface |
| Dimensions | 395 × 112 × 210 mm |
| Weight | 4.2 kg (without battery) |
| Operating Temperature | 0–45 °C |
| Relative Humidity | 5–95 % RH (non-condensing) |
| Power Supply | 110–240 VAC, 30 W or Rechargeable Battery (4 h standby) |
| Communication | RS232 Serial Interface |
| Data Storage | Removable 1 GB miniSD Card |
| Software | WinMuster AT (Offline & Real-Time Data Analysis) |
| OS Compatibility | Windows XP, Vista, 7 |
| Brand | AIRSENSE |
|---|---|
| Origin | Germany |
| Model | GDA-F |
| Detection Principle | Multi-Sensor Fusion (IMS, PID, MOS, EC) + Pattern Recognition Algorithm |
| Detection Time | 2–60 s |
| Detection Range | 1 ppb – 10 ppm (gas-dependent) |
| Sample Interface | Dedicated Container Probe with Integrated Auto-Sampling Pump |
| Operating Temperature | −30 °C to +50 °C |
| Relative Humidity Range | 5–95% RH (non-condensing) |
| Power Supply | Rechargeable Li-ion Battery (30 W, 4 h runtime) |
| Dimensions | 39.5 × 11.2 × 21 cm |
| Weight | 4.2 kg |
| Data Interfaces | RS-232, Ethernet, Wireless Transmission |
| Sensor Channels | 8-channel parallel acquisition (dual IMS, dual PID, dual MOS, dual EC) |
| Database | Preloaded Library of TICs & Fumigants (Expandable) |
| Brand | Aisida |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | CQ1000 |
| Cutting Length | 50–750 mm |
| Cutting Width | 200–1270 mm |
| Material Thickness | 0.04–0.3 mm |
| Cutting Accuracy | ±1.0 mm |
| Web Speed | ≤60 m/min |
| Slitting Frequency | ≤13 cuts/min (at 500 mm length) |
| Overall Dimensions | 2600 × 2300 × 1700 mm |
| Machine Weight | ~1500 kg |
| Power Consumption | ≤9 kW |
| Max Roll Diameter | ≤320 mm |
| Edge Quality | No whitening, delamination, wrinkling, charring, or visible dust |
| Brand | Aisida |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Region of Manufacture | Domestic (PRC) |
| Model | CQ2000 |
| Pricing | Available Upon Request |
| Brand | Aisida |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | XG |
| Pricing | Upon Request |
| Brand | Allied |
|---|---|
| Model | TrimSaw 2™ |
| Motor Power | 0.25 HP (190 W) |
| Blade Speed Range | 500–3000 RPM (in 100 RPM increments) |
| Blade Diameter | 6" (150 mm) |
| Max Cutting Depth | 1.6" (41 mm) |
| Worktable Dimensions | 6.75" × 12.5" (171 × 318 mm) |
| Coolant Reservoir Capacity | 1 US gallon (3.8 L) |
| Overall Dimensions | 18" × 20" × 11" (457 × 508 × 279 mm) |
| Weight | 35 lb (15.9 kg) |
| Compatible Blade Sizes | 4"–6" (102–152 mm) |
| Enclosure Material | Corrosion-resistant acrylic shield |
| Housing Material | Anodized aluminum and stainless steel |
| Accessories | Linear guide (90° fixed), universal vise kit |
| Brand | Auniontech (HaoLiang) |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | ALPES QCL |
| Price Range | USD 95,000 – 136,000 |
| Measurement Mode | AC-coupled modulation capable |
| Brand | ALPHA |
|---|---|
| Origin | USA |
| Model | 2000R |
| Operation | Pneumatic Dual-Action |
| Sample Type | Uncured Rubber Compounds |
| Application | Specimen Preparation for MDR, RPA, Viscosity Testers, and Carbon Black Dispersion Analyzers |
| Compliance | Designed for ASTM D5289, ISO 6502, and ISO 289-1 Specimen Geometry Requirements |
| Footprint | Compact Benchtop Design |
| Brand | ALPHA |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported Instrument |
| Model | ALPHA |
| Pricing | Available Upon Request |
| Brand | ALPHA |
|---|---|
| Origin | USA |
| Model | D2020 |
| Compliance | ASTM D1415, ISO 48, DIN 53519, NF T46-003, BS 903-A26 (International Rubber Hardness) |
| Automation | Fully automated 20-sample queue |
| Test Modes | Pre-configured 1-, 3-, or 5-point indentation sequences |
| Software Integration | Eclipse Daisy and Enterprise LIMS compatible |
| Hardness Head Design | Low-friction, maintenance-optimized indenter assembly |
| Optional Accessory | D2020 Density Tester module |
| Brand | ALPHA |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported Instrument |
| Model | DG+ |
| Pricing | Available Upon Request |
| Brand | ALPHA |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | DIS030 |
| Pricing | Upon Request |
| Brand | ALPHA |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | DS1200 / DS1500 / DS4000 |
| Pricing | Upon Request |
| Brand | ALPHA |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Imported |
| Model | DSP-FCI/DSP-Ex |
| Pricing | Available Upon Request |
| Brand | ALPHA |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | FAT-24D |
| Pricing | Upon Request |
| Brand | ALPHA |
|---|---|
| Origin | United Kingdom |
| Model | 6020 |
| Measurement Range | -110°C to +20°C dew point |
| Accuracy | ±2°C dew point (full scale) |
| Display | 5-digit red 14mm LED main display + dual 7mm auxiliary LEDs |
| Output | Dual programmable 10A SPCO relays |
| Analog Output | 0–20 mA / 4–20 mA (±0.5% accuracy) |
| Digital Interface | RS485 MODBUS RTU |
| Certifications | ATEX II 1G Ex ia IIC T6 Ga, IECEx, UKCA |
| Sensor Type | Ultra-high-capacitance aluminum oxide |
| Max Cable Length | 1 km |
| IP Rating | IP54 (front panel) |
| Power Supply | 90–250 VAC / 18–28 VDC |
| Operating Temperature | -20°C to +60°C |
| Weight | ≤0.47 kg |