Fabric Testing Instruments
Filter
Showing 1–30 of 142 results
| Brand | SDL Atlas |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Country of Origin | China |
| Model | M021A |
| Pricing | Available Upon Request |
| Origin | Tianjin, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | HY-603B |
| Pricing | Available Upon Request |
| Standard Compliance | ASTM D4157, ASTM D3597, FED-STD-191 Method 5304, SAE J948, SAE J1530, GM 2756M, Toyota TSH1301G, BS EN ISO 12402-2 |
| Test Heads | 4 independent oscillating stations |
| Counter | 4-channel digital electronic counter |
| Oscillation Speed | 0–90 rpm (infinitely variable, precision-controlled) |
| Curved Abrasion Surface Radius | R100 mm |
| Curved Surface Length | 400 mm |
| Effective Oscillation Stroke | 76 mm (arc length) |
| Abrasion Head Dimensions | 50 × 50 mm with R100 mm convex curvature |
| Specimen Tension | 17.8 N (adjustable per test method) |
| Specimen Load | 13.4 N (standard vertical force) |
| Included Accessories | Stainless steel wire mesh abrasive surface, rubber backing pad, certified standard abradants (Grade 10 or Grade 8 cotton duck fabric), ISO/IEC 17025-accredited calibration certificate |
| Brand | ATI |
|---|---|
| Origin | USA |
| Model | 100X |
| Compliance | NIOSH 42 CFR Part 84, GB 2626–2019, GB 19083, EN 13274-7:2019, ASTM F3502-21, ISO 23328, YY 0469 |
| Aerosol Types | NaCl (salt) or DOP/PAO/paraffin oil |
| Flow Range | 10–170 L/min |
| Filtration Efficiency Range | up to 99.9995% |
| Sampling | 100% isokinetic aerosol sampling |
| Aerosol Reservoir | 3.8 L (1 gal) integrated patented replenishment system |
| Test Area | 100 cm² standard flat-media fixture |
| Configuration Options | Manual, Automatic (PLC-integrated), Hybrid |
| Brand | ATI |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | PMLT |
| Price | USD $100,000 |
| Dimensions (Packaged) | 81 cm × 57 cm × 51 cm |
| Weight (Packaged) | ~41 kg |
| (Unpackaged) | ~26 kg |
| Power Supply | 100–250 V AC, 50/60 Hz |
| Aerosol Agent | Polyalphaolefin-4 (PAO-4) |
| Detection Principle | Near-forward light-scattering photometry |
| Detection Range | 0.0005–100% aerosol penetration |
| Fit Factor Limit | 200,000 |
| Data Interface | RS-232 serial port |
| Brand | SDL Atlas |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Manufacturer |
| Country of Origin | China |
| Model | M230 |
| Dimensions (L×W×H) | 780 × 760 × 2100 mm |
| Weight | 177 kg |
| Standards Compliance | BS EN 29865, DIN 53888, GB/T 14577, ISO 9865, NG G07-058 |
| Test Configuration | 4 test cups inclined at 15° |
| Dropper Array | 300 precision nozzles |
| Dropping Height | 1500 mm |
| Water Supply Options | Tap water or recirculated reservoir water |
| Integrated Features | Recirculating water system, automatic sample wiper, flow meter, water filter, intuitive control panel |
| Brand | NYX |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Direct Manufacturer |
| Model | PT 200 |
| Compliance Standards | GB 20265–2019, GB 24540–2009, GB/T 23462, ASTM F739 |
| Sample Dimensions | 60 mm × 60 mm (for protective clothing), Ø70 mm (for protective footwear) |
| Chamber Configuration | Dual-chamber design (exposure chamber contacting outer sample surface |
| Sealing Material | PTFE gaskets |
| Construction | Corrosion-resistant, chemically inert materials engineered for long-term exposure to aggressive liquids and vapors |
| Key | Load Capacity: 2500 N |
|---|---|
| Load Resolution | 1/30000 F.S. |
| Load Accuracy | ≤ ±0.5% F.S. (2–120% of sensor range) |
| Sampling Rate | ≥200 Hz |
| Maximum Burst Stroke | 200 mm |
| Ring Clamp Inner Diameter | 25 mm |
| Indenter Ball Diameter | 20 mm |
| Indenter Descending/Retracting Speed | 10–500 mm/min (digitally adjustable) |
| Elongation Resolution | 0.1 mm |
| Data Storage Capacity | ≥4000 test records (non-volatile memory) |
| Power Supply | 220 V, 50 Hz, 1000 W |
| Dimensions (L×W×H) | 600 × 400 × 1700 mm |
| Weight | ~125 kg |
| Display | 5.7″ Sharp blue-backlit LCD with Chinese GUI |
| Control System | Mitsubishi 16-bit industrial microcontroller + 16-bit A/D converter |
| Interface Options | RS-232 printer port, USB/RS-232 PC interface (optional), optional software for force–displacement curve generation and GLP-compliant reporting |
| Origin | France |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | EN388-2016 |
| Unit Packaging | 5 m² per Pack |
| Compliance | EN 388:2016 Clause 6.3, ISO 13997:1999 Annex A |
| Origin | Tianjin, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | HY-779B |
| Pricing | Available Upon Request |
| Drum Friction Tester | Internal Diameter 65 cm, Depth 45 cm, Adjustable Speed ≥46 rpm (infinitely variable via AC inverter motor), Opening Diameter ≥30 cm, Three Lifting Vanes, Standard Acrylic Fabric (Polyacrylonitrile) as Friction Cloth |
| Charge Measurement Unit | Range ±0.001 μC to 2 μC (±1 × 10⁻⁹ C to ±2 × 10⁻⁶ C), Auto-zero Calibration Circuit |
| Faraday Cage | 304 Stainless Steel (brushed finish), corrosion- and oxidation-resistant |
| Compliance | GB/T 12014–2009, GB 12059, FZ/T 01060 |
| Brand | Fangyuan Instruments |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | Y089A |
| Pricing | Available Upon Request |
| Drum Diameter | 515 ± 5 mm |
| Drum Depth | 335 ± 5 mm |
| Annular Gap (Inner–Outer Drum) | 28 ± 1 mm |
| Lifters | 3 pcs, spaced at 120° |
| Lifter Height | 50 ± 5 mm |
| Wash Rotation Cycle (Normal) | 12 ± 0.1 s CW / 3 ± 0.1 s pause / 12 ± 0.1 s CCW / 3 ± 0.1 s pause |
| Wash Rotation Cycle (Gentle) | 3 ± 0.1 s CW / 12 ± 0.1 s pause / 3 ± 0.1 s CCW / 12 ± 0.1 s pause |
| Wash Speed | 52 rpm |
| Spin Speed | 500 ± 20 rpm |
| Fill Time (to 13 cm water level) | < 120 s |
| Drain Time (from 13 cm water level) | < 60 s |
| Heating Power | 5.4 ± 2% kW |
| Dimensions (L×W×H) | 780 × 600 × 1200 mm |
| Net Weight | ~240 kg |
| Key | Load Capacity: 8000 cN |
|---|---|
| Load Resolution | 1/30000 FS |
| Load Accuracy | ≤±0.5% FS (2–100% of sensor range), ±1% FS (1–2% of sensor range) |
| Sampling Rate | ≥200 Hz |
| Traverse Speed | 10–999 mm/min (digital setpoint, adjustable or fixed) |
| Elongation Resolution | 0.1 mm |
| Max Elongation | 600 mm |
| Data Storage | ≥4000 test records (non-volatile memory) |
| Power Supply | 220 V, 50 Hz, 200 W |
| Dimensions (L×W×H) | 670 × 450 × 1660 mm |
| Weight | ~85 kg |
| Key | Brand: Fangyuan Instruments |
|---|---|
| Origin | Zhejiang, China |
| Model | YG026M |
| Force Range | 500 cN – 50,000 N (selectable) |
| Load Resolution | 1/50,000 of full scale |
| Force Accuracy | Class 0.5 (±0.5% of reading within 2–120% of sensor range |
| Maximum Travel | 900 mm |
| Elongation Resolution | 0.01 mm |
| Effective Width | 420 mm |
| Data Sampling Rate | ≥800 Hz (up to 1000 Hz dynamic) |
| Storage Capacity | ≥4,000 test records (onboard) |
| Test Speed | 0.1–1000 mm/min |
| Dimensions (L×W×H) | 450×750×1550 mm |
| Weight | 200 kg |
| Brand | Fangyuan Instruments |
|---|---|
| Origin | Zhejiang, China |
| Model | YG026PC |
| Force Range | 500 cN to 50,000 N (selectable) |
| Load Resolution | 1/50,000 of full scale |
| Force Accuracy | Class 0.5 (±0.5% of reading at 2–120% of sensor range |
| Maximum Travel | 1100 mm |
| Elongation Resolution | 0.01 mm |
| Effective Width | 420 mm |
| Data Sampling Rate | ≥800 Hz |
| Onboard Storage Capacity | ≥4,000 test records |
| Test Speed | 0.1–1000 mm/min |
| Dimensions (L×W×H) | 850×500×1800 mm |
| Weight | 280 kg |
| Brand | Fangyuan |
|---|---|
| Model | YG032D |
| Sample Clamp Inner Diameter | φ30.5 ± 0.05 mm |
| Diaphragm Outer Diameter | φ80 × 0.9 ± 1 mm |
| Burst Strength Range | 0–6 MPa |
| Burst Strength Resolution | 0.002 MPa |
| Burst Strength Accuracy | ≤ ±1% |
| Expansion Distance Range | 0.1–35 mm |
| Expansion Distance Accuracy | ±0.1 mm |
| Burst Time Range | 0.1–99.9 s |
| Hydraulic Pressure Rate | 10–150 mL/min |
| Hydraulic Fluid | 85% glycerol (glycerin) |
| Power Supply | AC 220 V, 50 Hz, 500 W |
| Dimensions (L×W×H) | 525 × 280 × 590 mm |
| Weight | ~50 kg |
| Brand | Fangyuan |
|---|---|
| Model | YG033A |
| Tear Force Range | 16 N, 32 N, 64 N |
| Force Accuracy | ≤ ±1 division |
| Notch Length | 20 ± 0.2 mm |
| Tear Distance | 43 mm |
| Specimen Size | 100 mm × 63 mm (L × W) |
| Dimensions | 400 mm × 210 mm × 390 mm (L × W × H) |
| Weight | 27 kg |
| Compliant Standards | GB/T 3917.1, FZ/T 6006, FZ/T 75001, ASTM D1424, ASTM D5734 |
| Brand | Fangyuan |
|---|---|
| Model | YG141D |
| Measurement Range | 0.1–30 mm |
| Resolution | 0.01 mm |
| Foot Area Options | 100 mm², 2000 mm² |
| Foot Diameter Options | Ø11.28 mm, Ø50.46 mm |
| Applied Pressures | 50 cN, 100 cN, 200 cN |
| Dwell Time Options | 10 s, 30 s |
| Foot Descent Speed | 1.72 mm/s |
| Power Supply | AC 220 V, 50 Hz, 40 W |
| Dimensions (L×W×H) | 410 × 160 × 300 mm |
| Weight | ~25 kg |
| Compliant Standards | GB/T 3820–1997, ISO 5084, ISO 9073-2, ISO 9863, FZ/T 01003 |
| Brand | Fangyuan Instruments |
|---|---|
| Model | YG401D |
| Workstations | 6 |
| Pre-set Count Range | 0–99999 cycles |
| Cumulative Count Range | 0–99999 cycles |
| Clamp Mass | 200 ± 1 g |
| Fabric Specimen Weight (Clothing) | 395 ± 2 g |
| Fabric Specimen Weight (Upholstery) | 594 ± 2 g |
| Abrading Block Effective Friction Diameter | Φ28.8 mm / Φ90.3 mm |
| Clamp-to-Table Relative Rotational Speed | 50 ± 2 rpm |
| Loading Hammer Mass | 2385 ± 10 g |
| Dimensions (L×W×H) | 820 × 505 × 410 mm |
| Net Weight | 150 kg |
| Power Supply | AC 220 V, 50 Hz, 300 W |
| Motion Pattern | Lissajous orbits (Ø40 mm and Ø60 mm) |
| Compliance | GB/T 4802.2, GB/T 13775, GB/T 21196, FZ/T 20020, ISO 12945-1/2/3, ISO 12947-1/2/3/4, ASTM D4966, ASTM D4970, JIS L1096, TM196 |
| Brand | Fangyuan |
|---|---|
| Model | YG461D |
| Measurement Principle | Constant-pressure air flow through fabric under standardized differential pressure |
| Pressure Range | 50–4000 Pa |
| Measurable Air Permeability | 1–9999 mm/s |
| Accuracy | ≤ ±2% |
| Sample Thickness Limit | ≤ 8 mm |
| Standardized Test Areas | 5, 20, 50, 100 cm² and Ø50 mm (≈19.6 cm²), Ø70 mm (≈38.5 cm²) |
| Nozzle Set | 11 calibrated stainless-steel nozzles |
| Power Supply | AC 220 V, 50 Hz, 1200 W |
| Dimensions | 820 × 600 × 1300 mm (L×W×H) |
| Weight | 65 kg |
| Compliance | GB/T 5453–1997, ISO 9237, ASTM D737, JIS L1096, DIN 53387, BS 5636, NF G07-111 |
| Brand | Fangyuan Instruments |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | YG502 |
| Pricing | Available Upon Request |
| Motion Trajectory | Φ40 mm circular path |
| Brush Height Adjustment Range | 2–12 mm (continuously adjustable) |
| Sample Area | 100 cm² |
| Pre-set Counter Range | 1–9999 cycles (digital input) |
| Oscillation Frequency | 60 cycles/min |
| Test Load | Synthetic fabrics: 590 cN (achieved via 100 cN + 490 cN weights) |
| Worsted wool fabrics | 780 cN (100 cN + 290 cN + 490 cN) |
| Woolen fabrics | 490 cN (single 490 cN weight) |
| Standard Weights Included | 100 cN ×1, 290 cN ×1 (sample holder self-weight: 490 cN) |
| Standard Abrasive | 2201 Standard Gabardine (2 pieces) |
| Foam Pads | 4 pcs |
| Power Supply | 1 HP, AC 220 V, 50 Hz, 100 W |
| Dimensions (L×W×H) | 540 × 250 × 345 mm |
| Net Weight | 30 kg |
| Brand | Fangyuan |
|---|---|
| Model | YG815A |
| Origin | Zhejiang, China |
| Compliance | GB/T 5455–1997, CPAI-84 (custom configuration) |
| Afterflame Timer Range | 0–999.9 s (0.1 s resolution) |
| Smolder Timer Range | 0–999.9 s (0.1 s resolution) |
| Ignition Time | 12 s (adjustable) |
| Flame Duration Stability | 30 s (adjustable) |
| Flame Height | 40 ± 2 mm |
| Igniter Tip Internal Diameter | 11 mm |
| Distance from Igniter Tip to Specimen | 17 mm at 25° tilt |
| Specimen Holder Dimensions | Outer 400 × 80 mm, Inner Aperture 360 × 50 mm |
| Chamber Dimensions | 329 × 329 × 767 mm (L×W×H) |
| Overall Dimensions | 350 × 450 × 885 mm (L×W×H) |
| Control Box | 230 × 190 × 110 mm (L×W×H) |
| Power Supply | AC 220 V, 50 Hz |
| Brand | Fangyuan |
|---|---|
| Model | YG815B |
| Test Method | Horizontal Flame Spread |
| Chamber Temperature Range | 0–99 °C (1 °C resolution) |
| Ignition Time | 15 s |
| Burner Orifice Diameter | 9.5 mm (standard) |
| Distance from Burner Tip to Specimen Surface | 19 mm |
| Specimen Holder Dimensions | 360 × 100 × 9 mm (L × W × H) |
| Test Chamber Internal Dimensions | 350 × 400 × 750 mm (L × W × H) |
| Overall Dimensions | 410 × 480 × 800 mm (L × W × H) |
| Control Box Dimensions | 250 × 200 × 100 mm (L × W × H) |
| Power Supply | AC 220 V, 50 Hz |
| Compliance Standard | FZ/T 01028–1993 |
| Origin | UK |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | FAST Fabric Assessment System |
| Price | USD 16,200 (FOB UK) |
| Brand | SDL Atlas |
|---|---|
| Origin | USA |
| Manufacturer Type | Manufacturer |
| Origin Category | Imported |
| Model | M034E |
| Price Range | USD 6,800 – 13,600 |
| Standard Compliance | ASTM D1777-2, ASTM D751-06, ISO 5084, ISO 9863-1, ISO 964-1 (2 kPa), ASTM D1621, D5199, D461, D3652 |
| Foot Diameter | 9.5 mm |
| Applied Load | 143 g (≈1.4 kPa) |
| Base Material | Laboratory-grade granite |
| Base Dimensions | 150 × 160 × 50 mm |
| Column Height | 200 mm |
| Indicator | Certified digital display with SPC output (RS-232), dual-language (English/metric), auto-power-off, left-hand lift handle |
| Brand | SDL Atlas |
|---|---|
| Origin | Shenzhen, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Country of Origin | China |
| Model | M293 |
| Pricing | Available upon Request |
| Origin | Tianjin, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Regional Origin | Domestic (PRC) |
| Model | GB/T 24654 |
| Price Range | USD 7,000 – 14,000 |
| Sample Dimensions | 110 mm width × 180–200 mm length |
| Hammer Mass | 1000 ± 10 g and 2000 ± 10 g (including auxiliary 1000 g weight) |
| Drop Height | Adjustable from 50 to 75 cm |
| Impact Energy Calculation | Based on real-time photogate-measured drop velocity and hammer mass (Joules) |
| Blade Specifications | 10 mm cutting edge length, 0.2R mm tip radius, 60° included angle, SK-3 tool steel, 58 HRC hardness |
| Drop Mechanism | Electromagnetic release with fail-safe mechanical brake |
| Timing Resolution | 0.1 ms (0–999 ms range) |
| Velocity Display | 0.0–9.9 m/s |
| Control Interface | Industrial-grade capacitive touchscreen HMI |
| Brand | GBPI |
|---|---|
| Model | GB-B20010 |
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Pressure Points | 3 kPa, 5 kPa, 7 kPa, 14 kPa, 20 kPa |
| Specimen Size | 75 mm × 75 mm |
| Pressurized Area | 28.27 cm² |
| Power Supply | AC 220 V, 50 Hz, 100 W |
| Air Source | Compressed Air |
| Pressure Regulation | Adjustable, with Analog Pressure Gauge |
| Clamping Torque | 13.5 N·m |
| Retention Mesh | Stainless Steel, Open Area ≥50%, Deflection ≤5 mm at 20 kPa |
| Timer | Digital, ±1 s Accuracy |
| Compliance | GB 19083–2010 |
| Brand | GBPI |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | GB-BF20010 |
| Pressure Test Points | 3 kPa, 5 kPa, 7 kPa, 14 kPa, 20 kPa |
| Specimen Size | 75 mm × 75 mm |
| Pressurized Area | 28.27 cm² |
| Power Supply | AC 220 V, 50 Hz, 100 W |
| Air Pressure Source | Adjustable compressed air up to (20 ± 1) kPa |
| Pressure Display | Analog pressure gauge with manual regulation |
| Test Chamber | Stainless steel penetration test chamber with leak-resistant sealing |
| Support Grid | Square metal retainer mesh, ≥50% open area, deflection ≤5 mm at 20 kPa |
| Clamping Torque | 13.5 N·m |
| Timer | Digital display timer, accuracy ±1 s |
| Brand | GBPI |
|---|---|
| Model | GB-BF20010A |
| Pressure Settings | 3, 5, 7, 14, 20 kPa |
| Test Area | 28.27 cm² (75 mm × 75 mm specimen) |
| Air Supply | Compressed air, regulated to (20 ± 1) kPa |
| Power Supply | AC 220 V, 50 Hz, 100 W |
| Timer Resolution | ±1 s |
| Clamp Torque | 13.5 N·m |
| Retention Mesh | ≥50% open area, ≤5 mm deflection at 20 kPa |
| Construction | Stainless steel test chamber with integrated specimen retention system |
| Brand | GBPI |
|---|---|
| Model | GB-BF20010CT |
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Pressure Settings | 3 kPa, 5 kPa, 7 kPa, 14 kPa, 20 kPa |
| Specimen Size | 75 mm × 75 mm |
| Pressurized Area | 28.27 cm² |
| Power Supply | AC 220 V, 50 Hz, 100 W |
| Air Source Requirement | Compressed air capable of delivering (20 ± 1) kPa |
| Clamp Torque | 13.5 N·m |
| Retention Mesh | ≥50% open area |
| Timer Resolution | ±1 s |
| Test Medium | ASTM F1862-compliant synthetic blood surrogate |
| Brand | GBPI |
|---|---|
| Model | GB-BF20010M |
| Pressure Settings | 3, 5, 7, 14, 20 kPa |
| Test Area | 28.27 cm² (75 mm × 75 mm specimen) |
| Air Supply | Compressed air, regulated to (20 ± 1) kPa |
| Power | AC 220 V, 50 Hz, 100 W |
| Timer Resolution | ±1 s |
| Clamp Torque | 13.5 N·m |
| Retention Mesh | ≥50% open area, ≤5 mm deflection at 20 kPa |
| Construction | Stainless steel test chamber |