Thermal Property Tester
Filter
Showing all 22 results
| Brand | ATSFAAR |
|---|---|
| Origin | Italy |
| Distribution Status | Authorized Distributor |
| Import Status | Imported |
| Capacity Options | 200 L, 5000 L |
| Pricing | Upon Request |
| Brand | ATSFAAR |
|---|---|
| Origin | Italy |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | CB-1200 |
| Pricing | Upon Request |
| Compliance | ASTM D1603, ISO 6964, DIN 53582 |
| Max Temperature | 1200 °C |
| Furnace Chamber | Ø30 mm × 250 mm (tubular quartz-lined) |
| Control System | Microprocessor-based digital temperature controller |
| Sample Vessel | High-purity ceramic crucible (combustion boat) |
| Accessories | Quartz tube assembly, metal support stand, gas inlet fittings, exhaust adapter |
| Brand | ATSFAAR |
|---|---|
| Origin | Italy |
| Manufacturer Status | Authorized Distributor |
| Origin Category | Imported |
| Model | Curing Resins |
| Pricing | Upon Request |
| Origin | France |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | CONGOTECH |
| Pricing | Upon Request |
| Brand | Drick |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | GDW-50E |
| Internal Chamber Dimensions (W×D×H) | 320 × 350 × 450 mm |
| Temperature Range | −80 °C to +150 °C |
| Temperature Uniformity | ≤ ±0.5 °C |
| Temperature Stability (Fluctuation) | ±0.5 °C |
| Cooling Rate (No Load) | 0.7–1.0 °C/min |
| Heating Rate (No Load) | 2.0–3.0 °C/min |
| Noise Level | ≤65 dB(A) |
| Power Supply | AC 380 V, 50 Hz |
| Compliance | GB/T 2423.1–2023 (Cold Test), GB/T 2423.2–2023 (Dry Heat Test) |
| Brand | ECON |
|---|---|
| Origin | Austria |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | EPO |
| Pricing | Available Upon Request |
| Brand | Elastocon |
|---|---|
| Origin | Sweden |
| Model | EB01 |
| Temperature Range (Standard) | +40 to +200 °C |
| Temperature Range (HT Variant) | +40 to +300 °C |
| Chamber Configuration | 4-unit or 6-unit modular design |
| Control Architecture | PLC-based with individual unit PID temperature control (EB19/EB20) or shared temperature control (EB01-II/EB01-IIHT) |
| User Interface | Full-color capacitive touchscreen HMI |
| Safety & Monitoring | Low-surface-temperature enclosure, integrated alarm history log, user-definable test name labeling per chamber, adjustable countdown timers per unit |
| Thermal Efficiency | Enhanced insulation reducing standby power consumption by ≥25% vs. prior generation |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported Instrument |
| Model | HSA |
| Pricing | Available Upon Request |
| Max Heating Temperature | 230 °C ±0.3% |
| Bidirectional Measurement | MD & CD |
| Thermal Expansion Range | up to 27% |
| Thermal Shrinkage Range | up to 5% |
| Sample Dimensions | 60 mm × 200 mm (MD or CD) |
| Resolution | 0.013% |
| Power Supply | 220 V / 50 Hz |
| Dimensions (H×W×D) | 295 mm × 280 mm × 320 mm |
| Weight | 15 kg |
| Brand | INNUO |
|---|---|
| Origin | Shanghai, China |
| Model | RS-900B |
| Display | 7-inch capacitive touchscreen |
| Temperature Range | Ambient to 1000 °C |
| Control Method | PID programmable temperature controller with auto-segment memory |
| Furnace Tube Dimensions | Ø42 mm × 800 mm |
| Rated Power | 4 kW |
| Heating Element | Resistance wire |
| Power Supply | AC 220 V, 50/60 Hz |
| Compliance | GB/T 17650.1–2–1998, IEC 60754-1/2:1994, EN 50305, BS 6853 Annex B |
| Dual-function mode | Halogen gas evolution testing & carbon black content analysis |
| Optional accessory | Rapid cooling unit |
| Insulation material | Nano-ceramic fiber blanket |
| Integrated auxiliary modules | pH meter, conductivity meter, magnetic stirrer |
| Brand | Labthink |
|---|---|
| Model | C631H |
| Origin | Shandong, China |
| Manufacturer | Labthink Instruments Co., Ltd. |
| Application | Rubber & Plastic Industry |
| Standards Compliance | GB/T 34848, ISO 14616:1997, DIN 53369:1976 |
| Force Sensor Range | 5 N (standard), optional 10 N / 30 N |
| Force Accuracy | ±0.5% of reading (10–100% FS), ±0.05% FS (0–10% FS) |
| Force Resolution | 0.001 N |
| Displacement Range | 0.1–95 mm |
| Displacement Accuracy | ±0.1 mm |
| Shrinkage Rate Range | 0.1–95% |
| Temperature Range | Ambient to 210 °C |
| Temperature Stability | ±0.2 °C |
| Temperature Accuracy | ±0.5 °C (single-point calibration) |
| Test Stations | 1 station (2 specimens simultaneously) |
| Specimen Size | 110 mm × 15 mm |
| Dimensions | 480 × 400 × 630 mm (L×W×H) |
| Weight | 26 kg |
| Power Supply | 220 VAC ±10%, 50 Hz / 120 VAC ±10%, 60 Hz |
| Brand | Labthink |
|---|---|
| Model | RSY-R2 |
| Application | Thermal shrinkage measurement of pharmaceutical PVC hard sheets, aluminum-plastic blister laminates, shrink films, and thermoplastic packaging substrates |
| Temperature Range | Ambient to 200 °C |
| Temperature Control Accuracy | ±0.3 °C |
| Specimen Size Capacity | ≤140 mm × 140 mm |
| Heating Medium | Liquid bath (oil or water, user-selectable) |
| Control System | Microprocessor-based PID temperature regulation with LCD menu interface |
| Power Supply | AC 220 V, 50 Hz |
| Dimensions (L×W×H) | 440 mm × 370 mm × 310 mm |
| Net Weight | 24 kg |
| Compliance | ASTM D2732, GB/T 13519–1992, YY/T 0698.3–2011 (for pharmaceutical packaging) |
| Brand | Metrohm |
|---|---|
| Origin | Switzerland |
| Manufacturer | Metrohm AG |
| Product Type | Imported Instrument |
| Model | 895 Professional |
| Pricing | Upon Request |
| Brand | NYX |
|---|---|
| Model | CCT |
| Origin | Tianjin, China |
| Manufacturer | NYX (OEM/ODM Capable) |
| Compliance | GB/T 38304–2019, EN 511:2006, ISO 5085-1:1977 |
| Test Principle | Two-Plate Heat Flow Method (Steady-State Thermal Resistance Measurement) |
| Sample Diameter | ≈85 mm |
| Test Duration | ≤2 hours per specimen |
| Repeatability | <5% RSD (typical <1% between replicate runs) |
| Data Output | XML-formatted log files compliant with ISO/IEC 17025 traceability requirements |
| System Components | Precision aluminum test plates (hot/cold), climate-controlled chamber (±0.2°C stability), calibrated heat flux sensor array, real-time DAQ module, proprietary thermal resistance analysis software |
| (Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | QJCXS-43 |
| Price | USD 9,100 |
| Test Temperature Range | −70 °C to 0 °C |
| Impact Velocity | 2.0 m/s ±0.2 m/s |
| Temperature Stability During Test (3 min) | ±0.5 °C |
| Impact Pin to Clamp Lower Edge Distance | 11.0 mm ±0.5 mm |
| Dimensions (W×D×H) | 700 mm × 700 mm × 1300 mm |
| Power Consumption | 1100 W) |
| Brand | R&P |
|---|---|
| Origin | Germany |
| Manufacturer Status | Authorized Distributor |
| Product Origin | Imported |
| Model | PVC |
| Pricing | Upon Request |
| Heating Block | Electric |
| Sample Capacity | 32 wells (Ø5.2 mm × 60 mm depth) |
| Temperature Sensor | PT100 probe |
| Safety Feature | Overtemperature protection |
| Controller | Independent PID temperature programmer |
| Display | Dual digital readout (setpoint & actual temperature) |
| Temperature Accuracy | ±0.2 °C |
| Adjustable Range | 60–210 °C |
| Sample Tubes | 100 pcs/set (Ø5 mm × 110 mm) |
| Power Supply | 230 V / 50 Hz, 500 W |
| Optional Accessory | Automated colorimetric detection system compliant with EN 60811-3-2 for objective thermal stability endpoint determination |
| Brand | Saicheng |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | RSY-R2 |
| Pricing | Upon Request |
| Brand | SYSTESTER |
|---|---|
| Origin | Shandong, China |
| Model | GTR-704R |
| Test Range | 10–15,000 s/100 mL (standard) |
| Resolution | 0.1 s/100 mL |
| Specimen Count | 1 |
| Pressure Range | 20 kPa |
| Pressure Accuracy | ±0.01 kPa |
| Test Area | 1.0 in² (0.25 in² / 0.1 in² optional) |
| Max Specimen Thickness | ≤5 mm |
| Test Gas | Clean Compressed Air (user-supplied) |
| Air Supply Pressure | 0.3–1.0 MPa |
| Interface | Ø6 mm pneumatic fitting |
| Dimensions (L×D×H) | 370 × 320 × 220 mm |
| Power | AC 220 V, 50 Hz |
| Net Weight | 20 kg |
| Standards Compliance | ISO 5636-5, ASTM D726, TAPPI T460, GB/T 36363–2018 |
| Brand | TianYuan |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | TY-5018 |
| Pricing | Available Upon Request |
| Temperature Range | Ambient to 300 °C (customizable up to 450 °C) |
| Temperature Resolution | 0.1 °C |
| Heating Control | 0–100% stepless PWM power regulation |
| Sample Stage | Φ19 mm concave spherical heating block |
| Optical Magnification | 10–270× mechanical (via object distance adjustment), 1000× digital (4× on-screen zoom) |
| Display | 7-inch IPS LCD, 1920×1080 @ 30 fps |
| Imaging Sensor | 12 MP CMOS, no motion blur, zero latency |
| Illumination | Dual adjustable-position LED + triple-channel PWM-controlled LED array |
| Video Output | Full HD MOV (1920×1080, 30 fps) |
| Still Image Format | JPG |
| Storage | MicroSD card (up to 32 GB, user-supplied) |
| Cooling Method | Passive natural convection |
| Power Supply | AC 220 V ±10%, 5–60 Hz, 200 W |
| Dimensions (W×D×H) | 240×240×360 mm |
| Weight | 2.8 kg |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.153-GTR |
| Torque Range | Max. 20.0 mN·m |
| Temperature Range | Up to 200 °C (optional cryo-cooling unit: 10–200 °C) |
| Rotor Speed | 25 rpm (50 Hz) / 24 rpm (60 Hz) |
| Timer Capacity | Max. 999,999 s (or 99 h 59 min 59 s) |
| Rotor Dimensions | φ5 × 110 mm |
| Sample Tube Dimensions | φ12 × 90 mm (OD × L) |
| Power Supply | AC 100 V, 1-phase, 10 A, 50/60 Hz |
| Dimensions & Weight | Approx. W570 × D375 × H720 mm, ~30 kg |
| Accessories Included | 100 rotors, 100 sample tubes |
| Optional | Silicone oil (~2 L), dedicated software, strip-chart recorder |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.170-AUTO |
| Temperature Range | −60 °C to 100 °C (dry ice cooling) |
| Heating Rate | 2 °C/min |
| Specimen Dimensions | W 6.35 ± 0.03 mm × L 64 mm × T 0.8–1.5 mm |
| Gauge Length | 40 mm |
| Angular Range | 0–270° (1° resolution) |
| Torque Application | Pulley-type weight system (5 g, 10 g, 20 g, 50 g) |
| Encoder Type | Rotary encoder for torsional angle measurement |
| Power Supply | 220 V, single-phase, 10 A, 50/60 Hz |
| Host Dimensions/Weight | ~300 × 400 × 780 mm / ~40 kg |
| Control Box Dimensions/Weight | ~330 × 350 × 180 mm / ~10 kg |
| Standards Compliance | JIS K6734, K6745, K6773, K6924-2, ASTM D1043, ISO 458 |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.173-S |
| Max. Temperature | 500 °C |
| Heating Rate | 2 °C/min |
| Load Range | 100 g to 2,600 g |
| Short-Circuit Detection Current | 5 ± 1 mA (max 50 mA) |
| Sample Holder Capacity | Up to 12 specimens (1 heated block × 4 positions × 3 channels) |
| Power Supply (Main Unit) | AC 200 V, 3-phase, 50 A, 50/60 Hz |
| Power Supply (PC) | AC 100 V, single-phase, ≤15 A, 50/60 Hz |
| Dimensions (W×D×H) | Approx. 1800 × 750 × 2000 mm |
| Weight | Approx. 550 kg |
| Compliance Standards | GB/T 4074.6, IEC 60851-6, JIS C3216-6:2011 |
| Key | Brand: Zhonghang Dingli |
|---|---|
| Origin | Beijing, China |
| Model | ZHDL-200 Series |
| Motor Power | 3.0 kW (Panasonic) |
| Speed Range | 0.1–120 rpm |
| Torque Range | 0–200 N·m (rated 300 N·m) |
| Torque Accuracy | ±0.3% F.S. |
| Melt Pressure Range | 0.1–100 MPa |
| Pressure Accuracy | ±0.3% F.S. |
| Temp Control Range | Ambient to 350 °C (5-zone control, 6-point measurement) |
| Temp Accuracy | ±0.1 °C |
| Data Acquisition Rate | 50 Hz |
| Mixer Volume | 60 mL |
| Rotor Type | Roller (Banbury/Cam/Delta optional) |
| Heating Power | 2.1 kW (3×700 W) |
| Voltage | AC 380 V, 7.5 kW |