Solid Phase Extraction Instrument
Filter
Showing 1–30 of 165 results
| Brand | Agela |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | AZOFF |
| Price Range | USD 14,000–35,000 |
| Automation Level | Fully Automated |
| Number of Channels | Up to 24 parallel positions (expandable via modular configuration) |
| Extraction Format | Column-based SPE |
| Flow Rate Control | 1–60 mL/min (precisely regulated via syringe pump) |
| Eluent Solvent Capacity | Single solvent reservoir (compatible with ethyl ether, dichloromethane, and other low-boiling-point organic solvents) |
| Sample Capacity | 8–24 samples per run |
| Sample Loading Volume | Up to 20 mL per column |
| Wetted Materials | PTFE only (including tubing, valves, and fluidic pathways) |
| Brand | Agela |
|---|---|
| Origin | Tianjin, China |
| Model | SPE-M96 |
| Automation Level | Semi-Automatic |
| Channel Configuration | 96-Channel Parallel |
| SPE Format | Column-Based (96-Well Plate Compatible) |
| Pressure Delivery | Positive Pressure (Up to 60 psi) |
| Flow Control | Manual Regulator |
| Solvent Selection | Manual Solvent Switching |
| Sample Capacity | Up to 96 Samples per Run |
| Sample Loading | Manual |
| Wetted Materials | PTFE (Polytetrafluoroethylene) |
| Gas Source Required | Compressed Air or Nitrogen |
| Brand | Agela |
|---|---|
| Origin | Tianjin, China |
| Model | QUEX-06E |
| Automation Level | Semi-Automatic |
| Channel Count | 6-Channel |
| Extraction Format | Column-Based SPE |
| Sample Capacity | 6 Samples |
| Compatible Devices | IC Columns & Syringe-Filter Assemblies |
| Material in Contact with Solvents | Chemically Resistant PTFE & Stainless Steel Components |
| Compliance | Designed for GLP-aligned sample preparation workflows |
| Brand | Agela |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | SPE-10 |
| Price Range | USD 14,000 – 35,000 |
| Automation Level | Fully Automated |
| Number of Channels | Multiple Independent Channels per Module |
| Extraction Format | Cartridge-Based SPE |
| Flow Rate Control | 0.1–30 mL/min |
| Solvent Selection | Up to 5 Different Elution/Wash Solvents |
| Sample Capacity per Module | 6 Samples |
| Scalability | Modular Expansion Supported |
| Sample Loading Volume | 0–5 L per Sample |
| Wetted Materials | PTFE (Polytetrafluoroethylene) |
| Pump Type | Valveless Precision Metering Pump |
| Fraction Collection | Multi-Fraction, Dual-Waste (Aqueous/Organic Separation) |
| Brand | Agela |
|---|---|
| Origin | Tianjin, China |
| Model | SPE-60 |
| Automation Level | Fully Automatic |
| Number of Channels | 6 parallel extraction channels |
| Extraction Format | Cartridge-based (column) SPE |
| Flow Rate Control Range | 0.1–50.0 mL/min |
| Solvent Selection Capacity | 9 independent solvent reservoirs |
| Sample Throughput | 6 samples simultaneously |
| Sample Loading Volume | 0.1–20.0 mL (expandable to 2000 mL via optional large-volume module) |
| Wetted Materials | Stainless steel (316L), PTFE |
| Column Compatibility | Interchangeable modules for 1 mL, 3 mL, 6 mL, and 12 mL SPE cartridges |
| Integrated Online Concentration | Yes |
| Robotic Positioning | XYZ-axis precision robotic arm with auto-washable sampling needle |
| Brand | Agela |
|---|---|
| Origin | Tianjin, China |
| Model | SPE-CLEANER-M12 |
| Automation Level | Semi-Automatic |
| Channel Count | 12-Channel |
| Extraction Type | Column-Based SPE |
| Sample Capacity | 1–12 samples |
| Sample Loading Volume | 50 mL |
| Wetted Materials | Polytetrafluoroethylene (PTFE) and Borosilicate Glass |
| Pressure Control | Dual-Stage Adjustable Positive Pressure |
| Column Compatibility | Standard Glass SPE Columns (with Optional Adapters) |
| Application Focus | Dioxin/Furan, DL-PCBs, and PBDEs Cleanup |
| Brand | Agela |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | SPE-D6 |
| Price | USD 1,550 (approx.) |
| Automation Level | Semi-Automatic |
| Number of Channels | 6 Independent Channels |
| Extraction Format | Cartridge-Based Solid-Phase Extraction |
| Flow Control Method | Manual Valve Regulation |
| Eluent Handling | Manual Solvent Addition |
| Sample Capacity | 2 Samples Simultaneously |
| Maximum Sample Volume per Run | 4 L |
| Wetted Materials | PTFE and 316L Stainless Steel |
| Brand | Agela |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Automation Level | Fully Automatic |
| Channel Count | 8 Independent Channels |
| Extraction Format | Cartridge-Based SPE |
| Flow Control | Per-channel adjustable and individually shutoff pneumatic flow regulation |
| Sample Capacity | Up to 8 samples simultaneously |
| Sample Loading Volume | Standard max. 50 mL |
| Dual-Pneumatic Circuit Design | One circuit for precise liquid flow control, one dedicated to cartridge drying/dehydration |
| Brand | Agela |
|---|---|
| Origin | Tianjin, China |
| Model | SPE-M08 |
| Automation Level | Semi-Automatic |
| Channel Count | 8-Channel |
| Extraction Format | Cartridge-Based SPE |
| Flow Control | Manual (Individual Valve Adjustment) |
| Solvent Delivery | Manual Loading |
| Sample Capacity | 1–8 Samples in Parallel |
| Sample Load Volume | 0–5 L |
| Wetted Materials | PTFE (Polytetrafluoroethylene) |
| Dual-Air-Path Design | One for Precise Flow Regulation, One for Post-Elution Drying |
| Compatibility | Standard SPE Cartridges & 47 mm SPE Disks |
| Brand | Agela |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | SPE-M08 |
| Automation Level | Fully Automatic |
| Number of Channels | 8 |
| Extraction Format | Cartridge-Based SPE |
| Flow Control | Independent, adjustable flow per channel with individual on/off valve control |
| Sample Capacity | Up to 8 samples simultaneously |
| Sample Loading Volume | Up to 50 mL standard |
| Dual Gas Path Design | One path for precise liquid flow regulation, one dedicated to cartridge drying/dehydration |
| Brand | Agela |
|---|---|
| Origin | Tianjin, China |
| Model | SPE-M12 |
| Automation Level | Semi-Automatic |
| Channel Count | 12 Independent Channels |
| Extraction Format | Cartridge-Based SPE |
| Flow Control Method | Pneumatic Pressure Regulation |
| Solvent Types Supported | ≥5 Distinct Eluents |
| Sample Capacity | 1–12 Samples per Run |
| Sample Loading Volume | Up to 25 mL per Cartridge |
| Wetted Materials | PTFE (Polytetrafluoroethylene) |
| Valve Configuration | 12 Individually Adjustable Pneumatic Valves |
| Dual-Gas Path Architecture | One for Precise Flow Modulation, One for Post-Elution Drying/Desolvation |
| Brand | Agela |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | SPE-M48 |
| Price Range | USD 7,000–14,000 (FOB) |
| Automation Level | Semi-Automatic |
| Number of Channels | 48 |
| Extraction Format | Cartridge-Based (Column) |
| Flow Control Method | Regulated Positive Pressure (Pneumatic) |
| Solvent Selection Ports | ≥5 Independent Solvent Lines |
| Sample Capacity | 48 Samples per Run |
| Sample Loading Volume | 1–6 mL per Cartridge |
| Wetted Materials | PTFE, Stainless Steel (316), and Chemically Resistant Elastomers |
| Brand | Agilent Technologies |
|---|---|
| Origin | USA |
| Model | 5982-9110 |
| Automation Level | Manual |
| Channel Count | 12-channel |
| Extraction Type | Column-based SPE |
| Flow Rate Control Range | 0.1–30 mL/min |
| Solvent Compatibility | Up to 5 different elution solvents |
| Sample Capacity | 24 samples per run (with optional rack configuration) |
| Sample Loading Volume | 1–30 mL |
| Wetted Materials | Borosilicate glass, PTFE, UHMW polyethylene |
| Brand | Agilent Technologies |
|---|---|
| Origin | USA |
| Model | 5982-9120 |
| Automation Level | Manual |
| Channel Count | 20-Channel |
| Extraction Type | Column-Based SPE |
| Flow Rate Control Range | 0.1–30 mL/min |
| Solvent Types Supported | Up to 5 Different Solvents |
| Sample Capacity | 20 Samples |
| Sample Loading Volume | 1–30 mL |
| Wetted Materials | Borosilicate Glass, PTFE, UHMW Polyethylene |
| Brand | AISTI |
|---|---|
| Origin | Japan |
| Device Type | Fully Automated Online SPE-LC Coupled System |
| Model | SPL-W100 |
| Automation Level | Fully Automatic |
| Channel Configuration | Multi-Channel |
| Extraction Format | Cartridge-Based SPE |
| Flow Rate Control Range | 0.1–30 mL/min |
| Solvent Selection Capacity | 5 Independent Solvent Lines |
| Sample Capacity | 50 Positions |
| Sample Loading Volume | 1.5 mL per Vial |
| Wetted Materials | Borosilicate Glass, PTFE, and Chemically Inert Elastomers |
| Brand | ANYAN |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | CY-6SPE |
| Price | USD 14,000 (FOB) |
| Automation Level | Fully Automated |
| Channel Configuration | 6 Independent Parallel Channels |
| Extraction Format | Cartridge-Based SPE |
| Solvent Reservoirs | 8 Distinct Solvent Ports |
| Sample Loading Volume | 1–50 mL (Pressure-Driven Mode) |
| Compatible Cartridge Sizes | 1, 3, 6, and 12 mL |
| Pump Precision | ≤1% Flow Accuracy |
| Flow Rate Control | Digital Stepper Motor–Driven Programmable Pumps |
| Pressure Delivery | Positive-Pressure Manifold with Real-Time Pressure Monitoring |
| Safety Features | Overpressure & Overtemperature Protection |
| Software Interface | Graphical Method Editor with Preloaded ASTM/USP-Compliant Protocols |
| Compliance | Designed for GLP/GMP-Traceable Workflows |
| Brand | ATR |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | AutoPro SPE 200 |
| Automation Level | Fully Automated |
| Number of Channels | Dual-Channel (upgradable to 20-channel) |
| Extraction Format | Cartridge-Based SPE |
| Flow Rate Control | 0–60 mL/min |
| Solvent Selection | Up to 8 Pre-Installed Solvents |
| Sample Capacity | 2 Samples Simultaneously |
| Sample Loading Volume | 1–100 mL (extendable to 1000 mL) |
| Wetted Materials | PTFE Only |
| Brand | ATR |
|---|---|
| Origin | USA |
| Model | SPE360/SPE330/SPE200 |
| Automation Level | Fully Automatic |
| Channel Count | 6 (SPE360), Multi-Channel (SPE330), Dual-Channel (SPE200) |
| Extraction Type | Cartridge-Based SPE |
| Flow Rate Control | 0.1–60 mL/min |
| Solvent Types Supported | 6 (SPE360), 8 (SPE330 & SPE200) |
| Sample Capacity | 36 samples (SPE360), 6 samples (SPE330), 2 samples (SPE200) |
| Sample Load Volume | 10–20,000 mL (SPE360/SPE330), 1–1,000 mL (SPE200) |
| Solvent-Wetted Materials | PTFE |
| Volumetric Accuracy | ±1.0% (system), ±1.5% (peristaltic pump) |
| Brand | ATR |
|---|---|
| Origin | USA |
| Model | Super SPE 300 |
| Automation Level | Fully Automated |
| Number of Channels | 6 |
| SPE Format Compatibility | Cartridge and Membrane (25 mm & 47 mm) |
| Flow Rate Control | 0.1–60 mL/min (sample pump) |
| Solvent Reservoirs | 8 independent solvent ports |
| Sample Capacity | Up to 6 large-volume samples simultaneously |
| Sample Loading Volume | 10–20,000 mL |
| Wetted Materials | PTFE only |
| Method Compliance | EPA-approved methods |
| Control Interface | 12-inch touchscreen PC with bilingual (English/Chinese) GUI |
| Waste Segregation | Three dedicated waste lines (aqueous, general organic, chlorine-containing organic) |
| Optional Module | Integrated Automated Quantitative Concentration Unit (vortex-assisted nitrogen blow-down, 0–50 mL input, endpoint at 0.5 or 1.0 mL) |
| Brand | ATR |
|---|---|
| Origin | USA |
| Model | Super SPE300 |
| Automation Level | Fully Automated |
| Number of Channels | 6 |
| Cartridge/Membrane Compatibility | Universal (Columns & Disks) |
| Flow Rate Control | 0.1–60 mL/min |
| Solvent Selection Ports | 8 |
| Sample Capacity | Up to 6 large-volume samples simultaneously |
| Sample Loading Volume | 10–20,000 mL |
| Wetted Materials | PTFE |
| Brand | ATR |
|---|---|
| Origin | USA |
| Model | SuperSPE 360 |
| Automation Level | Fully Automatic |
| Number of Channels | 6 Independent Channels |
| Extraction Format | Cartridge-Based SPE |
| Flow Rate Control | 0.1–60 mL/min |
| Solvent Reservoirs | 8 |
| Sample Capacity | 36 Positions |
| Sample Volume Range | 10–20,000 mL |
| Wetted Materials | PTFE |
| Brand | Autoscience |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | ASE-12 / ASE-16 / ASE-24 |
| Price Range | USD 420 – 690 |
| Automation Level | Semi-Automatic |
| Channel Count | 12 / 16 / 24 Parallel Channels |
| Extraction Format | Cartridge-Based Column SPE |
| Flow Rate Control | 0.1–30 mL/min (adjustable per channel via precision needle valve) |
| Solvent Compatibility | Multiple organic and aqueous solvents (e.g., methanol, acetonitrile, ethyl acetate, hexane, water, buffer solutions) |
| Sample Throughput | Simultaneous processing of 12 / 16 / 24 samples |
| Cartridge Dimensions Supported | Max. OD 15 mm × L ≤ 105 mm (compatible with 1 mL, 3 mL, 5 mL, and 6 mL SPE cartridges) |
| Solvent-Wetted Materials | Borosilicate glass vacuum manifold, PTFE-coated stainless steel valves, chemically resistant elastomer seals |
| Origin | Tianjin, China |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Domestic |
| Model | OD-8 |
| Price Range | USD 35,000–57,000 |
| Automation Level | Fully Automatic |
| Channel Count | Multi-channel |
| Extraction Method | Column-Based SPE |
| Fluidic Materials in Contact | PharMed® and PTFE |
| Sample Throughput | Up to 24 textile specimens per run (8 primary channels + 3× parallel staging) |
| Flow Rate | 6 mL/min (adjustable range: 5–8 mL/min) |
| Total Elution Volume Capacity | 0–120 mL |
| Certified Compliance | Designed to meet all operational requirements of GB/T 17592–2006 “Textiles — Determination of Certain Azo Colorants” |
| Brand | Biotage |
|---|---|
| Origin | USA |
| Model | RapidTrace |
| Configuration | Modular, Up to 10 Units Scalable |
| Throughput | 40–100 Samples/Hour (10-Module Configuration) |
| Sample Capacity per Module | Up to 10 Samples |
| Solvent Channels per Module | 8 |
| Cartridge Compatibility | 1 mL, 3 mL, and 6 mL SPE cartridges (standard fritted or polypropylene housing) |
| Eluent Delivery | Positive-pressure-driven, flow-controlled |
| Waste Segregation | 4 Independent Waste Lines (Organic, Inorganic, Biological, Hazardous) |
| Integrated Reagent Mixing Chamber | Yes, with pH-adjustment capability |
| Software Interface | Menu-driven, method-centric, audit-trail enabled |
| Regulatory Compliance Support | FDA 21 CFR Part 11–ready, GLP/GMP-aligned workflow logging |
| Brand | Chengmeng |
|---|---|
| Origin | Beijing, China |
| Model | CM-SPE-48 |
| Automation Level | Manual |
| Channel Count | 48-channel parallel |
| Extraction Type | Cartridge-based SPE |
| Flow Rate Control | 0–30 mL/min (adjustable via dual-range pressure regulation) |
| Solvent Selection | Up to 5 independent solvent lines |
| Sample Capacity | 1–48 samples per run |
| Pressure Range | Low-flow mode: 0–60 psi (0.3–0.4 MPa) |
| High-flow mode | 0–140 psi (0.97–1.0 MPa) |
| Contact Materials | 316 stainless steel gas block, regulators, and fluid path components |
| Compatible Column Sizes | 1 mL, 3 mL, 6 mL SPE cartridges |
| Collection Vessels | 12 × 32 mm vials (5 mL, 15 mL), 1.5 mL microcentrifuge tubes |
| Gas Supply | Nitrogen or clean compressed air (filtered, oil-free, ≤1.0 MPa inlet pressure) |
| Brand | Chengmeng |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | CM-SPE60 |
| Automation Level | Fully Automated |
| Number of Channels | 6 |
| Extraction Format | Cartridge-Based SPE |
| Flow Rate Control | Precision Numerical-Controlled Pump (0–60 mL/min) |
| Solvent Selection | 8 Independent Solvent Reservoirs |
| Sample Capacity | 6 Positions |
| Sample Loading Volume | 1–60 mL (pressure-assisted up to 50 mL |
| Wetted Materials | PTFE, Chemically Resistant Tubing & Fittings |
| Flow Accuracy | ≤1% |
| Linearity (Speed vs. Flow) | R² ≥0.999 |
| Power Supply | 220 V / 50 Hz |
| Brand | Chengmeng |
|---|---|
| Origin | Beijing, China |
| Model | SPE-12A |
| Automation Level | Manual |
| Number of Channels | 12 |
| Extraction Format | Cartridge-Based (Column) |
| Flow Rate Control Range | 0.1–30 mL/min |
| Solvent Compatibility | Broad (Polar to Nonpolar) |
| Sample Capacity | 12 samples per run |
| Sample Loading Volume | 1–30 mL |
| Wetted Materials | PTFE, Borosilicate Glass, 316 Stainless Steel, High-Performance Polymer Components |
| Brand | Chengmeng |
|---|---|
| Origin | Beijing, China |
| Model | SPE-24A |
| Automation Level | Manual |
| Channel Count | 24-Channel |
| Extraction Format | Cartridge-Based (Column) |
| Flow Rate Control Range | 0.1–30 mL/min |
| Solvent Compatibility | Broad (All Common Organic and Aqueous Solvents) |
| Sample Capacity | 24 Samples Simultaneously |
| Sample Loading Volume | 1–30 mL per Cartridge |
| Wetted Materials | PTFE, 316 Stainless Steel (Nozzle), Borosilicate Glass (Vacuum Chamber), High-Performance Polymer (Manifold & Supports) |
| Brand | Chengmeng |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | SPE96 |
| Automation Level | Manual |
| Channel Configuration | Single-Channel with 96-Port Manifold |
| Extraction Format | Cartridge-Based SPE |
| Flow Rate Control | 0–30 mL/min (adjustable via regulated gas pressure) |
| Solvent Selection | Up to 5 distinct elution solvents |
| Sample Capacity | 96 samples per run |
| Sample Loading Volume | 1–20 mL per well |
| Wetted Materials | 316 Stainless Steel manifold, PTFE-sealed fittings |
| Operating Pressure Range | 0.3–1.0 MPa (43–145 psi), typical working range 0.4–0.7 MPa (58–102 psi) |
| Gas Inlet | Compressed nitrogen or clean dry air |
| Flow Uniformity | ±3% CV across all 96 ports (validated per ISO 5725-2:2019 repeatability protocol) |
| Brand | Chengmengweiye |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | OEM Manufacturer |
| Product Category | Domestic |
| Model | SPE-12N |
| Price | USD 1,150 (FOB) |
| Automation Level | Manual |
| Channel Count | 12 |
| Extraction Format | Cartridge-Based Column Extraction |
| Flow Rate Control | Adjustable via vacuum manifold (max. 30 mL/min per channel) |
| Solvent Reservoir Capacity | 12 independent solvent ports |
| Sample Throughput | 12 samples simultaneously |
| Sample Loading Volume | Up to 60 mL per channel |
| Wetted Materials | Borosilicate glass (vials), PTFE-coated stainless steel (manifold), silicone-free elastomers (seals) |
| Pressure Range | 0–80 kPa (operational range) |
| Max. Safe Working Pressure | 65 kPa |
| Outlet Tubing ID | 8 mm |
| Vial Dimensions | Ø27.5 × 108 mm (60 mL nominal capacity) |
| Optional Accessories | Cartridge Adapter Kit (P/N: 321650-01) |
| High-Volume Sampling Manifold Extension (P/N | 324212-01) |