Tribological Tester
Filter
Showing 1–30 of 122 results
| Origin | Taiwan |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Manufactured in Taiwan |
| Model | Abrasion Tester 339 |
| Pricing | Available Upon Request |
| Origin | Tianjin, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Classification | Domestic (China) |
| Model | HY-763 |
| Price | Upon Request |
| Abrasion Standard Compliance | GB/T 1689, BS 903-A9, CNS 734 |
| Wheel Dimensions | Ø150 × 25 mm (36# grit) or Ø150 × 38 mm (40# grit) |
| Applied Load | 27.5 N (standard), configurable |
| Rotational Speed | 76 ± 2 rpm |
| Counter | LCD, 0–999,999 cycles |
| Specimen Tilt Angle | 0°–45° adjustable |
| Calibration Certificate | CNAS-accredited calibration report included |
| Brand | Anton Paar |
|---|---|
| Origin | Switzerland |
| Manufacturer Type | Manufacturer |
| Origin Category | Imported |
| Model | Calotest Series |
| Instrument Type | Ball Cratering Tribological Coating Thickness Tester |
| Maximum Operating Temperature | Ambient (23 °C ± 2 °C) |
| Rotational Speed Range | 10–3000 rpm |
| Wear Time Range | 1–10000 s |
| Standard Ball Diameters | 10, 15, 20, 25.4, 30 mm |
| Measurable Coating Thickness Range | 0.1–50 µm |
| Applicable Standards | ISO 1071-2, VDI 3198 |
| Brand | Anton Paar |
|---|---|
| Origin | Austria |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Origin Category | Imported |
| Model | MCR Tribological Tester |
| Instrument Type | Coefficient of Friction Analyzer |
| Maximum Friction Force | 70 N |
| Friction Force Resolution | 0.005 N |
| Maximum Temperature | 600 °C |
| Normal Force Range | 0.1–70 N |
| Normal Force Resolution | 0.005 N |
| Rotational Speed Range | 10⁻⁶–3000 rpm |
| Sliding Velocity Range | 10⁻⁸–3.3 m/s |
| Torque Range | 1 nNm–300 mNm |
| Torque Resolution | 0.1 nNm |
| Oscillation Frequency Range | 10⁻⁷–100 Hz |
| Angular Amplitude Range | 1 µrad to ∞ |
| Angular Resolution | 10 nrad |
| Minimum In-situ Wear Depth Detection | 0.65 µm |
| Electrotribology Capability | Yes (0–4 kV, up to 1 mA) |
| Temperature Control Range (T-BTP module) | −160 °C to +600 °C |
| Humidity Range | 5–95% RH |
| Brand | Anton Paar |
|---|---|
| Origin | Switzerland |
| Manufacturer | Anton Paar GmbH |
| Type | High-Temperature Tribological Tester |
| Model | THT |
| Maximum Friction Force | 20 N |
| Friction Force Resolution | 0.03 mN |
| Maximum Operating Temperature | 1000 °C |
| Rotational Speed Range | 0.3–500 rpm (optional up to 1500 rpm) |
| Maximum Torque | 450 N·mm |
| Compliance Standards | DIN 50324, ASTM G99, ASTM G133 |
| Brand | Anton Paar |
|---|---|
| Origin | Switzerland |
| Manufacturer | Anton Paar GmbH |
| Type | Multifunctional Tribological Tester |
| Model | TRB³ |
| Maximum Normal Force | 60 N |
| Normal Force Resolution (net weight) | Not specified |
| Maximum Friction Force | 20 N (optional 5 N) |
| Friction Force Resolution | 0.015 mN (optional 0.06 mN) |
| Rotational Speed Range | 0.2–2000 rpm (optional up to 600 rpm) |
| Linear Reciprocating Stroke | up to 60 mm |
| Linear Reciprocating Speed | up to 370 mm/s |
| Linear Frequency Range | 0.01–10 Hz |
| Oscillatory Rotational Speed | 0.2–2000 rpm |
| Oscillatory Frequency Range | 0.01–7 Hz |
| Angular Amplitude Range | ±5° to ±150° |
| Angular Resolution | 0.1° |
| Heating Capability | up to 450 °C (dry), up to 150 °C (liquid) |
| Vacuum Level | down to 10⁻⁷ mbar |
| Relative Humidity Control | 15–95% RH |
| Contact Resistance Measurement | up to 1000 Ω |
| Online Wear Depth Measurement (optional) | −2 to +2 mm |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | D2-APG |
| Pricing | Upon Request |
| Test Load | 5 N or 2.5 N |
| Brand | HENGYU |
|---|---|
| Model | HY-603 |
| Standard Compliance | ASTM D4157, ASTM D3597, FED-STD-191/5304, SAE J1948, SAE J1530, GM 2756M, Toyota TSL 5101G.3.9.4 |
| Construction | Anodized aluminum & stainless steel frame with powder-coated enclosure |
| Bearing System | THK precision linear bearings |
| Controller | Programmable digital counter with auto-stop function |
| Speed Control | Adjustable jog and test speed (mechanically regulated) |
| Safety | Interlocked ventilation guard with pinch-point protection |
| Motor | High-efficiency brushless DC motor |
| Power Input | Configurable voltage (specify at order) |
| Dimensions (L×W×H) | 66 × 66 × 102 cm |
| Weight | 58 kg |
| Warranty | 12-month manufacturer warranty |
| Origin | Tianjin, China |
| Distribution Type | Authorized distributor |
| Brand | GBPI |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Region of Origin | Domestic (China) |
| Model | GX-C2 |
| Price Range | USD 7,000 – 14,000 |
| Instrument Category | Coefficient of Friction Tester |
| Maximum Scratching Force | 20 ± 0.2 N |
| Force Resolution | 0.2 N |
| Maximum Operating Temperature | 150 °C |
| Scratching Speed | 0–43 cycles/min |
| Scratching Area | 240 mm (L) × 50 mm (W) |
| Cycle Count Range | 1–999,999 |
| Specimen Dimensions | 320 mm (L) × 50 mm (W) |
| Overall Dimensions | 440 mm × 400 mm × 200 mm |
| Power Consumption | 430 W |
| Input Power | AC 220 V, 50 Hz |
| Brand | TLS |
|---|---|
| Origin | Spain |
| Model | T-5333 |
| Application | Burst strength testing of paper and paperboard |
| Category | Physical property testing instrument / Tribological tester (burst-specific) |
| Import status | Imported |
| Brand | Bruker |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported Instrument |
| Model | TriboLab CMP |
| Instrument Type | Multifunctional Tribological Tester |
| Maximum Friction Force | 200 N |
| Friction Force Resolution | 10 mN |
| Maximum Operating Temperature | 1000 °C |
| Brand | Bruker |
|---|---|
| Origin | USA |
| Model | TriboLab |
| Instrument Type | Multi-Function Tribological Tester |
| Maximum Friction Force | 2000 N |
| Force Resolution | 10 mN |
| Maximum Temperature | 1000 °C |
| Vertical Travel | 150 mm (0.5 µm resolution) |
| Horizontal Travel | 75 mm (0.25 µm resolution) |
| Linear Drive Speed | 0.002–10 mm/s |
| Rotational Drive Speed | 0.1–5000 rpm |
| Reciprocating Frequency | 0.1–60 Hz |
| Stroke Range | 0.1–25 mm |
| Torque Capacity | 5 N·m @ 100 rpm / 2.5 N·m @ 5000 rpm |
| Data Acquisition | 16-bit, up to 200 kHz (8 standard channels, expandable to 16) |
| Environmental Control Options | −30 °C to 1000 °C temperature chamber, 5–85% RH humidity control, liquid immersion cell, cryogenic cooling, programmable fluid pump (2.2–480 mL/min) |
| Brand | HENGYU |
|---|---|
| Origin | Tianjin, China |
| Model | HY-766-1 |
| Roller Diameter | 150 mm |
| Test Modes | Rotating & Non-Rotating Specimen Mounting |
| Dimensions (L×W×H) | 95 × 66 × 31 cm |
| Weight | 55 kg |
| Power Supply | AC 220 V, 50 Hz, 500 W |
| Operating Environment | 23 ± 2 °C, 50 ± 5 % RH |
| Compliance | GB/T 9867–2008, ISO 4649:2002, GB/T 26703–2011, DIN 53516 |
| Brand | DJH Designs |
|---|---|
| Origin | Canada |
| Model | MEK |
| Instrument Type | Reciprocating Tribological Tester |
| Max Friction Load | 4 kg |
| Friction Force Resolution | 0.4 mN |
| Max Operating Temperature | 60 °C |
| MEK Reservoir Capacity | 425 mL |
| Reciprocating Stroke Length | 203 mm |
| Cycle Count Range | 1–9999 |
| Operating Air Pressure | 550 kPa (80 psi) |
| Air Consumption | 2.35 SCFM @ 550 kPa |
| Air Inlet Connection | ¼ NPT |
| Counter Accuracy | ±1 cycle |
| Weight of Rubbing Block Assembly | 3 kg |
| Brand | Ducom |
|---|---|
| Origin | USA |
| Model | AJET |
| Instrument Type | High-Temperature Tribological Tester |
| Max Friction Force | 2000 N |
| Friction Force Resolution | 0.1 mN |
| Max Operating Temperature | 1000 °C |
| Erosion Velocity Range | 30–150 m/s |
| Abrasive Feed Rate | 1–5 g/min (nominal 200-mesh Al₂O₃) |
| Impact Angles | 15°, 30°, 45°, 60°, 75°, 90° (customizable with upgraded fixture) |
| Nozzle Orifice Diameter | 1.5 mm (optional 2–3 mm for ≥800 °C operation) |
| Specimen Dimensions | 25 × 25 × 5 mm (custom sizes available) |
| Abrasive Hopper Capacity | 2 L |
| Brand | Ducom |
|---|---|
| Origin | USA |
| Model | FBT-3 |
| Instrument Type | Four-Ball Friction and Wear Tester |
| Maximum Load Capacity | 10,000 N |
| Load Resolution | 0.5 N |
| Rotational Speed Range | 0–3000 rpm |
| Temperature Range | Ambient to 120 °C (optional high-temp upgrade to 1000 °C) |
| Test Ball Diameter | 12.7 mm |
| Compliance Standards | ASTM D2783, D2596, D2266, D4172, D5183 |
| Origin | Hong Kong |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Domestic Production | Yes |
| Model | HFRR |
| Price Range | USD 140,000 – 210,000 |
| Instrument Category | High-Precision Tribological Tester |
| Max Friction Force | ±40 N |
| Friction Force Resolution | 0.1 mN |
| Max Test Temperature | 75 °C |
| Oscillation Frequency Range | 10–60 Hz |
| Humidity Control Range | 5–85% RH (adjustable in software) |
| Compliance | ASTM D6079, ISO 12156-1, EN 590 Annex D |
| Brand | Ducom |
|---|---|
| Origin | USA |
| Model | HPTW |
| Instrument Type | High-Temperature Tribological Tester |
| Max Friction Force | 2000 N |
| Friction Force Resolution | 2 mN |
| Max Temperature | 300 ℃ |
| Chamber Pressure Range | 5–1000 bar |
| Sliding Velocity | 5–50 m/s |
| Normal Load Range | 100–2000 N |
| Compound Wear Measurement Range | 0–4000 µm |
| Coefficient of Friction Range | 0–1 |
| Frictional Torque Range | 0–10 N·m |
| Temperature Control Accuracy | ±1 ℃ |
| Pressure Control Accuracy | ±0.2% FS |
| Wear Resolution | 1 µm |
| Torque Measurement Accuracy | ±0.05% FS |
| Sliding Velocity Accuracy | ±0.01% FS |
| Normal Load Accuracy | ±0.2% FS |
| Brand | Ducom |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | SJET |
| Instrument Type | High-Temperature Tribological Tester |
| Maximum Friction Force | 2000 N |
| Friction Force Resolution | 0.1 mN |
| Maximum Operating Temperature | 1000 °C |
| Jet Velocity | 10–50 m/s |
| Jet Diameter | 4 mm (fixed) |
| Maximum Erosion Flux | 100–2000 cc/min |
| Impact Angle | 15–90° (adjustable in 15° increments) |
| Specimen Dimensions | 25 × 25 × 4.8 mm (custom sizes available) |
| Sample Chamber Volume | 150 × 150 × 150 mm |
| Nozzle-to-Specimen Distance | 50 mm |
| Water Tank Capacity | 1200 L |
| Slurry Tank Capacity | 60 L |
| Closed-Loop Slurry Recirculation System | Yes |
| Brand | Ducom |
|---|---|
| Origin | USA |
| Model | TR-20-HTVT |
| Maximum Friction Force | 20 N |
| Friction Force Resolution | 0.4 mN |
| Maximum Temperature | 800 °C |
| Operating Environment | High Vacuum (down to 10⁻⁷ mbar) or Controlled Atmosphere (inert gas, humidified air) |
| Sliding Modes | Unidirectional (CW/CCW), Bidirectional (angular oscillation), Spiral/Programmable Wear Tracks |
| Load Control | Programmable (constant, ramp, stepped) |
| Rotational Speed Range | 0.1–2000 rpm |
| Wear Track Diameter | 15–70 mm |
| Sample Geometry | Pin/Ball (Ø3–10 mm) vs. Rotating Disk (Ø100 mm) |
| Temperature Control Resolution | ±1 °C |
| Displacement Resolution | 0.1 µm |
| Angular Oscillation Frequency | 0.1–5 Hz |
| Stroke Angle Range | 0–10° |
| Brand | Ducom |
|---|---|
| Origin | USA |
| Model | UniTest 750 |
| Maximum Friction Force | 1000 N |
| Friction Force Resolution | 1 nN |
| Maximum Test Temperature | 1000 °C |
| Instrument Type | Multi-Functional Tribometer |
| Configuration | Modular, Open-Architecture Desktop Platform |
| Origin | Netherlands |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | WDE-250 |
| Price Range | USD 195,000 – 260,000 (FOB) |
| Instrument Type | Tribological Erosion Tester |
| Maximum Applied Load | 10,000 N |
| Force Resolution | 0.5 N |
| Maximum Test Temperature | 1000 °C |
| Impact Velocity Range | 25–250 m/s |
| Liquid Flow Rate | 8 L/min |
| Jet Pressure | 32 MPa |
| Jet Diameter | 2–4 mm |
| Droplet Size | 2–4 mm |
| Nozzle Orifice Diameters | 0.8, 2.0, 4.0 mm |
| Impact Angle | 15°–90° (adjustable) |
| Droplet Frequency | 5–100 Hz |
| Total Impact Cycles | Up to 5 × 10⁶ |
| Sample Stage Travel (X–Y) | 25 × 25 mm |
| Brand | LienSheng |
|---|---|
| Origin | Taiwan |
| Model | LS-905 |
| Instrument Type | Static Coefficient of Friction Tester |
| Max Inclination Angle | 45° |
| Tilt Rate | 1.5 ± 0.5 °/s |
| Test Block Dimensions | 100 mm (L) × 50 mm (W) × 750 g |
| Sample Platform Size | 125 mm (W) × 280 mm (L) |
| Motor | 110 V, 5 W |
| Overall Dimensions | 400 mm (L) × 350 mm (W) × 350 mm (H) |
| Weight | 2.5 kg |
| Compliant Standards | CNS 13119, TAPPI T815 om-85 |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | DM-III |
| Pricing | Available Upon Request |
| Stroke Frequency | 0–135 cycles/min (single-pass) |
| Counter Range | 0–9999 (dual-pass |
| Abrading Head Mass | 570 ± 20 g |
| Optional Weights | 50 g, 100 g, 200 g |
| Power Supply | 220 V, 50 Hz |
| Rated Power | 60 W |
| Dimensions (L×W×H) | 300 × 280 × 380 mm |
| Net Weight | ~25 kg |
| Brand | Fangyuan Instruments |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | GB7706 |
| Quotation | Upon Request |
| Specimen Area | 60 × 210 mm |
| Rubbing Speed | 4 adjustable speeds (21 / 42 / 85 / 106 cycles per minute) |
| Applied Load | 4.5 lb (2.04 kg, 20 N) |
| Stroke Length | 60 mm |
| Cycle Count Range | 0–999,999 (auto-stop) |
| Rubbing Contact Area | 50 × 100 mm |
| Power Consumption | 40 W |
| Dimensions (W×D×H) | 300 × 325 × 300 mm |
| Net Weight | 20 kg |
| Input Voltage | AC 220 V, 1 A |
| Brand | GuanCe |
|---|---|
| Model | GCDDW-2000 |
| Origin | Beijing, China |
| Type | Tribological Tester (High-Current Resistive Heating & Thermal Monitoring System) |
| Max Friction Force | 20 N |
| Friction Force Resolution | 0.001 N |
| Max Operating Temperature | 200 °C |
| Input Voltage | AC 380 V |
| Rated Power | 30 kW |
| Electrode Stroke | 300 mm |
| Current Source Output | AC 5 V / 0–2000 A |
| Adjustable AC Supply | 0–450 V (20 kVA Autotransformer) |
| Load Cell Range | 1 kN |
| IR Temperature Sensor Range | 0–800 °C |
| Dimensions (L×W×H) | 1500 × 1000 × 1980 mm |
| Weight | 500 kg |
| Brand | Guance Instruments |
|---|---|
| Origin | Beijing, China |
| Model | GCGEST123 |
| Instrument Type | Tribological Tester for Electrical Contact Resistance and Wear Evaluation |
| Max Applied Pressure | 0.6–0.8 MPa |
| Operating Ambient Temperature | −30 °C to +40 °C |
| Relative Humidity Limit | ≤85% RH |
| Test Current | 10 A (constant) |
| Resistance Measurement Range | 10 μΩ to 100 Ω (RMS) |
| Electrode Pairs | 4 |
| Current Electrode Material | Brass (ID 20 mm, OD 35 mm) |
| Voltage Electrode Material | Nickel-plated Copper |
| Voltage Probe Switching | Automatic front/side selection |
| Clamping Mechanism | Pneumatic dual-axis cylinder actuation with spring-loaded elastic contact |
| Integrated Air Supply | Built-in silent air compressor (also supports external pneumatic source) |
| Control System | Siemens PLC-based real-time acquisition and logic control |
| Data Interface | Desktop PC via USB and industrial Ethernet |
| Brand | GuanCe Instruments |
|---|---|
| Origin | Hebei, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | GCMC-2000 |
| Instrument Type | Pin-on-Disk (Ring-on-Block) Tribometer |
| Maximum Friction Force | 0–1000 N |
| Rotational Speed Range | 0–3000 rpm |
| Temperature Control Range | 0–200 °C |
| Normal Load Capacity | 0–2000 N |
| Friction Force Resolution | 0.1 N (typical, per ASTM G99 calibration practice) |
| Radial Runout of Spindle | ≤0.01 mm |
| Axial Displacement of Spindle | ≤0.01 mm |
| Parallelism Between Spindle Axis and Test Table | ≤0.02 mm |
| Specimen Dimensions (Block) | 12 mm × 12 mm × 19 mm |
| Power Supply | 220 V / 50 Hz |
| Rated Power | 2 kW |
| Dimensions (L×W×H) | 600 mm × 500 mm × 500 mm |
| Net Weight | 75 kg |
| Compliance | GB/T 12444–2006, ASTM G99, ISO 7148-1 |
| Brand | GuanCe Instruments |
|---|---|
| Origin | Beijing, China |
| Model | M-200 |
| Instrument Type | Coefficient of Friction Tester |
| Maximum Friction Torque | 0–4 N·m |
| Friction Torque Resolution | 1% FS |
| Load Capacity | 196 N (±0.1%, upgradable to 392 N) |
| Rotational Speed Range | 0–200 rpm (adjustable) |
| Specimen Dimensions | 30 mm × 7 mm × 6 mm |
| Friction Counter Accuracy | ±1 s |
| Load Accuracy | ±0.5% |
| Speed Accuracy | ±1% |
| Torque Measurement Accuracy | ±1% FS |
| Friction Ring | Ø40 mm × 10 mm, 45# steel, hardened to HRC 40–45, surface roughness Ra ≤ 3.2 µm, concentricity < 0.01 mm |
| Operating Temperature Range | Ambient to 80 °C |
| Brand | GuanCe Instruments |
|---|---|
| Origin | Beijing, China |
| Model | M-200A |
| Maximum Friction Force | 300 N |
| Friction Force Resolution | 1% of full scale |
| Maximum Test Temperature | 800 °C |
| Rotational Speed Range | 0–200 rpm (adjustable) |
| Load Capacity | 196 N ± 0.1% (extendable to 392 N) |
| Friction Torque Range | 0–4 N·m |
| Sample Dimensions | 30 mm × 7 mm × 6 mm |
| Friction Ring | Ø40 mm × 10 mm, hardened 45# steel (HRC 40–45), surface roughness Ra ≤ 3.2 µm |
| Load Accuracy | ±0.5% FS |
| Speed Accuracy | ±1% |
| Torque Measurement Accuracy | ±1% FS |
| Sensor Accuracy | ±1% FS |
| Counter Timing Resolution | 1 s |