Pellet Press
Filter
Showing 1–30 of 69 results
| Brand | Aist ST |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | SH-3 |
| Pricing | Available Upon Request |
| Rated Force | 50 kN |
| Platen Closure Height | 50 mm |
| Platen Stroke | 6.5 mm |
| Maximum Hand Lever Effort | 210 N |
| Net Weight | 14 kg |
| Dimensions (L×W×H) | 180 × 330 × 280 mm |
| Brand | Aliben |
|---|---|
| Origin | Sichuan, China |
| Manufacturer Type | Direct Manufacturer |
| Regional Category | Domestic (China) |
| Model | AGT |
| Instrument Type | Fully Automatic Pellet Press |
| Application Scope | Sandstone, Mudstone/Shale, Dolomite, Limestone, Gypsum, Igneous Rock |
| Function | Fully Automated Powder Milling and Pellet Pressing |
| Maximum Sample Dimension | Longest Edge < 1.5 cm |
| Operation Mode | Fully Automatic |
| Brand | ATSFAAR |
|---|---|
| Origin | Italy |
| Model | 10026120 |
| Max Operating Force | 100 kN (10 tonf) |
| Recommended Max Working Force | 70–80 kN |
| Platen Spacing Range | 0–200 mm |
| Bottom Platen Stroke | 180 mm (pneumatically adjustable) |
| Heating Plate Dimensions | 300 × 300 mm |
| Temperature Range | Ambient to 300 °C |
| Inlet Pressure | Compressed Air 5 bar, Cooling Water 3 bar |
| Electrical Supply | 230 V, 50 Hz, 6.4 kVA |
| Overall Dimensions (W × D × H) | 900 × 750 × 1450 mm |
| Net Weight | ~250 kg |
| Pressure Gauge | 150 mm dial, full scale 630 kg/cm² (≈61.8 MPa) |
| Brand | ATSFAAR |
|---|---|
| Origin | Italy |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | A1026110 |
| Instrument Type | Fully Automatic Pellet Press |
| Maximum Force | 265 kN (27,000 kgf) |
| Platen Area | 300 × 300 mm |
| Stroke Adjustment Range | 0–200 mm |
| Max Operating Temperature | 300 °C |
| Cooling Method | Integrated cooling channels in heated platens (air or recirculating water) |
| Control Option | Microprocessor-based digital programmable controller |
| Brand | Carver |
|---|---|
| Origin | USA |
| Model | 3710H |
| Type | Fully Automated Heated Hydraulic Pellet Press |
| Max Pressure | 30 tons |
| Platen Size | 15 in × 15 in |
| Platen Spacing Range | 6–12 in |
| Platen Stroke | 6 in |
| Column Diameter | 1.25 in |
| Base Dimensions | 42 in × 40 in |
| Height | 72 in |
| Weight | 1,850 lb |
| Operating Temperatures | 260 °C / 426 °C / 649 °C |
| Optional Accessories | Electrically Heated Platens, Programmable Logic Controller (PLC), Low-Pressure Operation Kit, Adjustable Compression Rate Module, Integrated Auto-Cooling System |
| Brand | Carver |
|---|---|
| Origin | USA |
| Type | Manual Hydraulic Pellet Press |
| Pressure Capacity | 12–30 tons (24,000–60,000 lbf) |
| Frame Configuration | Dual-Post or Four-Post |
| Platen Dimensions | 4" round to 12"×12" |
| Platen Travel | 5.1–6.5 in |
| Adjustable Platen Gap | 0.75–18 in |
| Construction | Cast iron and hardened steel |
| Mold compatibility | 13 mm, 31 mm, and 40 mm diameter dies |
| Brand | Carver |
|---|---|
| Origin | USA |
| Model | 38874387 |
| Type | Fully Automatic Hydraulic Pellet Press |
| Maximum Pressure | 25 tons (3887) / 40 tons (4387) |
| Platen Diameter | 5 in |
| Platen Travel | 1 in |
| Platen Spacing Range | 1.5–7.25 in |
| Standard Die Sizes | 13 mm (25-ton), 31 mm (40-ton) |
| Optional Die Size | 40 mm |
| Base Dimensions | 32×20 in (3887) / 34×22.75 in (4387) |
| Height | 22 in (3887) / 26 in (4387) |
| Weight | 400 lb (3887) / 500 lb (4387) |
| Control System | SD microprocessor (standard), PD programmable controller (upgraded) |
| Brand | Carver |
|---|---|
| Origin | USA |
| Model | 4128 |
| Maximum Working Pressure | 30 tons (267 kN) |
| Maximum Temperature | 343 °F (173 °C) |
| Platen Dimensions | 12 in × 12 in (305 mm × 305 mm) |
| Platen Stroke | 6 in (152 mm) |
| Base Footprint | 32 in × 27 in (813 mm × 686 mm) |
| Type | C-frame Hydraulic Press |
| Compliance | ASTM E10, ASTM E384, ISO 20501, USP <1059>, GLP-ready architecture |
| Brand | CARVER |
|---|---|
| Origin | USA |
| Model | 4350 |
| Type | Manual Pellet Press |
| Maximum Force | 12 tons (24,000 lbf) |
| Platen Diameter | 10.16 cm |
| Die Cavity Compatibility | 13 mm |
| Ram Stroke | 13 cm |
| Jaw Opening Range | 0–13.97 cm |
| Pressure Gauge Range | 0–24,000 psi |
| Dimensions (L×W×H) | 26×20×51 cm |
| Net Weight | 57.5 kg |
| Base Color | Dark Gray |
| Brand | Carver |
|---|---|
| Origin | USA |
| Model | 4386 CH |
| Type | Manual Hydraulic Pellet Press |
| Maximum Pressure | 12 tons (24,000 lbf) |
| Heating Capability | Electrically heated platens up to 343 °C |
| Platen Size | 6 in × 6 in |
| Platen Spacing | 0–15 in |
| Brand | Carver |
|---|---|
| Origin | USA |
| Model | 43860 |
| Type | Semi-Automatic Heated Pellet Press |
| Maximum Force | 12 tons (24,000 lbf) |
| Platen Spacing Range | 0–15 in (0–381 mm) |
| Hydraulic Ram Stroke | 5.125 in (130 mm) |
| Platen Size | 6 × 6 in (152.4 × 152.4 mm) |
| Heating Power per Platen | 700 W |
| Max Temperature | 650 °F (343 °C) |
| Temperature Control | Digital PID Controller per Platen |
| Operating Voltage | 240 V AC, 6 A Full Load |
| Dimensions (W×D×H) | 22 × 16 × 39 in (55.9 × 40.6 × 99.1 cm) |
| Net Weight | 300 lb (136 kg) |
| Safety Features | Interlocked Gray Safety Shield, Electronic Emergency Power Cut-off (Fuseless) |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | 3887 |
| Instrument Type | Fully Automatic Hydraulic Pellet Press |
| Maximum Force | 25,000 lbf (11.3 kN) |
| Platen Diameter | 5 in (127 mm) |
| Ram Stroke | 11.5–7.25 in (292–184 mm) |
| Daylight Range | 7.25–11.5 in (184–292 mm) |
| Base Dimensions | 32 × 20 in (813 × 508 mm) |
| Height | 22 in (559 mm) |
| Weight | 400 lb (181 kg) |
| Pressure Units | kgf, lbf, ton (US) |
| Control Mode | Digital Programmable with 10 Preset Programs |
| Optional Cooling | Manual/Air/Water-Cooled Platen Configurations Available |
| Brand | Chemplex |
|---|---|
| Origin | USA |
| Model | 4312 |
| Type | Manual Hydraulic Pellet Press |
| Maximum Force | 12 tons (107 kN) |
| Compliance | ASTM E1985, ISO 13908, USP <1059> for Solid Dosage Form Preparation |
| Construction | High-strength steel frame with precision-machined hardened steel platens |
| Platen Diameter | 32 mm (standard), compatible with 13 mm, 25 mm, and 32 mm die sets |
| Pressure Display | Analog gauge with dual-scale (tons / MPa) calibration traceable to NIST standards |
| Weight | 42 kg |
| Footprint | 220 × 180 × 480 mm (W × D × H) |
| Brand | Chemplex |
|---|---|
| Origin | USA |
| Model | 4325 |
| Pressing Force | 30 tons (267 kN) |
| Die Set Options | 32 mm, 35 mm, 40 mm, or 45 mm (Part Nos. 4030, 4038, 4040, 4047) |
| Type | Fully Automatic Pellet Press for X-ray Fluorescence (XRF) Sample Preparation |
| Key | Brand: EWIN-TECH |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | Nova HT1000 |
| Heating Plate Temperature Range | Up to 300 °C |
| Maximum Applied Force | 200 kN (20 tonf) |
| Max. Platen Size | 300 × 300 mm |
| Positional Speed Control Resolution | 0.01 mm/s |
| Platen Material | SKD11/SKD61 Chromium-Molybdenum Alloy with Mirror-Finish Chrome Plating |
| Cooling System | Pressure-Controlled Automatic Water-Cooling Circuit |
| Control Mode | Manual & Programmable Multi-Stage Velocity Profile |
| Brand | EWIN-TECH |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Regional Category | Domestic (China) |
| Model | Nova HT200 |
| Pricing | Available Upon Request |
| Brand | Fortec |
|---|---|
| Origin | Netherlands |
| Model | LabManual |
| Type | Manual Pellet Press |
| Maximum Force | 300 kN |
| Platen Dimensions | 320 × 320 mm |
| Pressure Capacity | 2.93 N/mm² |
| Heating Range | Up to 300 °C |
| Electrical Supply | 230 V, 16 A |
| Overall Dimensions (L×W×H) | 500 × 500 × 800 mm |
| Weight | 275 kg |
| Frame | Dual-column rigid steel construction |
| Platen Configuration | Fixed upper platen, movable lower platen |
| Temperature Uniformity | High spatial uniformity across platen surface |
| Safety Compliance | CE-marked, integrated mechanical and thermal safety interlocks |
| Key | Brand: Fortelab |
|---|---|
| Origin | Netherlands |
| Model | LabEcon |
| Force Capacity | 300 / 600 / 1000 kN |
| Platen Size | 320×320 / 400×400 / 500×500 mm |
| Max Temperature | 300 °C (optional 400 °C) |
| Control System | TP Control (8.4″ touchscreen) or Pro-View Control (15″ touchscreen) |
| Power Supply | 3×400 V / 50 Hz or 3×480 V / 60 Hz |
| Weight | 600 / 800 / 1000 kg |
| Compliance | ASTM, DIN, ISO |
| Origin | Netherlands |
|---|---|
| Model | LabPro |
| Type | Fully Automatic Hydraulic Hot Press |
| Max Force | 50–3000 kN |
| Max Platen Size | up to 500 × 500 mm |
| Max Temperature | 700 °C |
| Platen Parallelism | < 5 µm/m |
| Control Interface | 8.4″ or 15″ Touchscreen (TP Control / Pro-View Control) |
| Compliance | ASTM D3182, ISO 527-2, ISO 6508-1, DIN 53505, USP <1059>, GLP/GMP-ready audit trail support |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | FW-4A |
| Price | USD 820 (FOB Beijing) |
| Instrument Type | Manual Hydraulic Pellet Press |
| Rated Working Pressure | 240 kN (24 metric tons, 38 MPa) |
| Ultimate Pressure | 300 kN (30 metric tons, 47 MPa) |
| Pressure Stability | ≤1 MPa drop over 5 min |
| Piston Stroke | 30 mm |
| Working Chamber Dimensions | 100 × 100 × 100 mm |
| Hydraulic Fluid | ISO VG 32 mineral oil |
| Overall Dimensions | 200 × 250 × 450 mm |
| Net Weight | 33 kg |
| Brand | Hefei Kejing |
|---|---|
| Model | YLJ-24T |
| Maximum Pressure | 24 Ton (235 kN) |
| Max Gauge Pressure | 40 MPa |
| Cylinder Stroke | 0–25 mm |
| Pressure Stability | ≤1 MPa / 10 min |
| Working Chamber | 105 × 105 × 150 mm (Height Customizable) |
| Overall Dimensions | 280 × 200 × 520 mm |
| Net Weight | 36 kg |
| Standard Accessories | Hex Key Wrench, Fixed Wrench, Hand Lever, Cotter Pin, O-Ring Seal |
| Optional Accessories | Cold-Press Dies, Heated Dies |
| Brand | Hefei Kejing |
|---|---|
| Origin | Anhui, China |
| Model | YLJ-40T |
| Max. Pressure | 0–40 ton (0–400 kN) |
| Max. Gauge Pressure | 0–40 MPa (0–400 kgf/cm²) |
| Cylinder Stroke | 0–25 mm (optional: 0–50 mm) |
| Pressure Stability | ≤1 MPa / 10 min |
| Hold Time Range | 0–6 min (optional: 0–60 min) |
| Input Voltage | AC 220 V or AC 380 V (configurable) |
| Power Consumption | 180 W |
| Working Chamber Dimensions | 155 × 100 × 180 mm or 180 × 100 × 230 mm (height customizable) |
| External Dimensions | 370 × 350 × 455 mm or 345 × 350 × 505 mm |
| Net Weight | 60 kg (65 kg with optional configuration) |
| Brand | Hefei Kejing |
|---|---|
| Origin | Anhui, China |
| Model | YLJ-P200 |
| Max. Force | 2000 N (200 kgf) |
| Force Control Accuracy | ±0.5 kgf |
| Max. Stroke | 200 mm |
| Platen Diameter | 110 mm |
| Control System | Digital PID Pressure Controller (28-Step Programmable Ramp/Hold Profiles) |
| Safety | Integrated Interlocked Protective Enclosure with Dual 5-mm Electrode Feedthroughs |
| Certification | CE |
| Dimensions (W×D×H) | 240 × 230 × 680 mm |
| Net Weight | 75 kg |
| Power Requirement | External Compressed Air Supply (Not Included) |
| Application Class | Fully Automated, Oil-Free Pneumatic Press for Solid-State Battery Electrochemical Testing and Sample Pelletization |
| Brand | TOP (Tianjin) |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | HF-2A |
| Instrument Type | Manual Pellet Press |
| Compatible Die Diameter | 13 mm |
| Maximum Pressure Capacity | 15 metric tons |
| Required Accessory | HF-6 Tablet Holder Insert |
| Brand | Top Instrument |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | HF-2D |
| Instrument Type | Manual Pellet Press |
| Maximum Pressure Capacity | 15 t |
| Die Cavity Diameter | Φ20 mm |
| Ejection Mechanism | Integrated Manual Demolding System |
| Pricing | USD 198 (FOB Tianjin) |
| Origin | Japan |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | 0130 |
| Price Range | USD 6,800 – 13,500 |
| Instrument Type | Manual Hydraulic Pellet Press |
| Compatible Pellet Diameters | 1 mm, 3 mm, 7 mm |
| Die Head Material | Stainless Steel (AISI 304) |
| Construction | Compact and Rugged Benchtop Design |
| Maintenance | Tool-Free Disassembly for Cleaning |
| Brand | JIA XIN HAI |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | JYP-24-D |
| Price | USD 820 (FOB Tianjin) |
| Brand | Jiaxinhai |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | Circular Split Die, 61–70 mm Diameter |
| Price | USD 700 (FOB Tianjin) |
| Brand | Jiaxinhai |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | JPT-10 |
| Price | USD 850 (FOB Tianjin) |
| Brand | Jiayuan |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | FW-4 |
| Instrument Type | Manual Hydraulic Pellet Press |
| Pressure Range | 0–24 T (0–38 MPa) |
| Maximum Piston Stroke | 20 mm |
| Oil Cylinder Diameter | Φ70 mm |
| Pressure Gauge | Dual-Scale Analog Pressure Gauge |
| Working Table Diameter | 80 mm |
| Working Chamber Dimensions | 120 × 120 × 130 mm |
| Pressure Stability | ≤1 MPa/10 min |
| Net Weight | 25 kg |
| Overall Dimensions | 240 × 170 × 390 mm |
| Construction | Monolithic Cast Aluminum Base Plate, Chrome-Plated Oil Cylinder, Four-Guided Column Architecture |
| Handle & Crank Material | Anodized Aluminum Alloy |