Creep and Stress Rupture Testing Machine
Filter
Showing all 24 results
| Brand | Changchun Intelligent |
|---|---|
| Origin | Jilin, China |
| Model | RSW-30K |
| Max Test Load | 30 kN |
| Crosshead Travel | 100 mm |
| Dimensions (L×W×H) | 600 × 450 × 1900 mm |
| Weight | 300 kg |
| Load Frame Type | Electromechanical |
| Compliance | GB/T 16491, GB/T 2611, GB/T 11546.1, GB/T 15048, GB/T 20672, GB/T 1040.1, GB/T 1041, GB/T 9341 |
| Brand | GuanCe Instruments |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | YSRB-300.2 |
| Instrument Type | Electromechanical |
| Maximum Test Load | 100 kN |
| Max Plunger Stroke | 180 mm |
| External Dimensions | 350 mm × 400 mm × 400 mm |
| Net Weight | 70 kg |
| Heating Method | Air Bath |
| Test Channels | 3 |
| Temperature Range | Ambient to 300 °C |
| Temperature Stability | ±2 °C |
| Heating Rate Options | 50 ± 3 °C/h or 10 ± 2 °C/12 min |
| Temperature Resolution | 0.1 °C |
| Deformation Measurement Accuracy | ±0.002 mm |
| Specimen Dimensions | 50 mm × 50 mm × 50 mm or 40 mm × 40 mm × 20 mm |
| Compression Platen Size | 50 mm × 50 mm (×3) |
| Recommended Load Range | 0–1 MPa |
| Heating Chamber Volume | 350 mm × 400 mm × 400 mm |
| Lever Load Amplification Ratio | 1:32 |
| Loading Configuration | Compression (lever-weighted), Flexural (direct-weighted) |
| Standard Compliance | GB/T 20672–2006, DIN 53424 |
| Brand | GuanCe Instruments |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | YSRB-300.3 |
| Instrument Type | Electromechanical |
| Max Test Load | 10 kN |
| Max Plunger Stroke | 180 mm |
| Dimensions (W×D×H) | 580 × 620 × 350 mm |
| Net Weight | 100 kg |
| Heating Method | Air-bath |
| Test Channels | 3 |
| Temperature Range | Ambient to 300 °C |
| Temp. Stability | ±2 °C |
| Heating Rate | 50 ± 3 °C/h or 10 ± 2 °C/12 min |
| Temp. Resolution | 0.1 °C |
| Deformation Resolution | 0.002 mm |
| Specimen Size | 50 × 50 × 50 mm or 40 × 40 × 20 mm |
| Loading Plate | Three 50 × 50 mm square platens |
| Recommended Stress Range | 0–1 MPa |
| Heating Chamber Volume | 350 × 400 × 400 mm |
| Lever Ratio | 1:32 |
| Loading Modes | Compression (lever-weighted), Bending (direct-weighted) |
| Standard Compliance | GB/T 20672–2006, DIN 53424 |
| Brand | GuanCe Instruments |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | YSRB-300B |
| Instrument Type | Electromechanical |
| Maximum Test Load | 100 N |
| Max Plunger Stroke | 180 mm |
| Overall Dimensions (L×W×H) | 1850 × 1580 × 1230 mm |
| Net Weight | 50 kg |
| Heating Method | Air-bath |
| Temperature Range | Ambient to 300 °C |
| Temperature Stability | ±2 °C |
| Heating Rate Options | 50 ±3 °C/h or 10 ±2 °C/12 min |
| Temperature Resolution | 0.1 °C |
| Deformation Measurement Accuracy | ±0.002 mm |
| Specimen Dimensions | 50 × 50 × 50 mm or 40 × 40 × 20 mm |
| Compression Platen Size | 50 × 50 mm (triple station) |
| Recommended Stress Range | 0–1 MPa |
| Heating Chamber Volume | 350 × 400 × 400 mm |
| Lever Load Amplification Ratio | 1:32 |
| Test Modes | Compression (lever-weight loading), Bending (direct-weight loading) |
| Standard Compliance | GB/T 20672–2006, DIN 53424 |
| Brand | Hengyi |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | HY(RC)1 |
| Price Range | USD 7,000 – 14,000 |
| Instrument Type | Electromechanical |
| Maximum Test Load | 100 kN |
| Maximum Crosshead Travel | 200 mm |
| Dimensions (W×D×H) | 460 × 430 × 1100 mm |
| Machine Weight | 850 kg |
| Load Measurement Accuracy | ±0.5% of reading (from 1% FS) |
| Load Control Stability | ±1% of reading |
| Crosshead Speed Range | 0.01–180 mm/min |
| Deformation Measurement | Imported linear encoder |
| Deformation Range Options | Up to 25 mm |
| Deformation Accuracy | ±0.5% |
| Furnace Internal Diameter | φ50 mm |
| Furnace Length | 450 mm |
| Temperature Range | Ambient to 1200 °C |
| Temperature Control Accuracy | ±0.5 °C |
| Temperature Resolution | 0.1 °C |
| Uniform Temperature Zone Length | >150 mm |
| Load Application System | Imported servo motor with continuous adjustable range (0–10/20/30/50/100 kN) |
| Load Resolution | 0.1 N |
| Furnace Power Rating | 3 kW |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JB/RB-30 |
| Instrument Type | Mechanical |
| Maximum Test Load | 30 kN |
| Maximum Rod Stroke | 500 mm |
| Dimensions (L×W×H) | 2100 × 710 × 540 mm |
| Unit Weight | 500 kg |
| Brand | Jiubin |
|---|---|
| Origin | Shanghai, China |
| Model | JB/RD |
| Type | Electromechanical Testing System |
| Max Test Load | 30 kN |
| Maximum Crosshead Travel | 500 mm |
| Dimensions (L×W×H) | 2100 × 710 × 540 mm |
| Unit Weight | 500 kg |
| Compliance | JJG 276–2009, JJF 1298–2011, GB/T 2039–1997 |
| Brand | Qinji |
|---|---|
| Origin | Shanghai, China |
| Model | 212F |
| Instrument Type | Electronic |
| Maximum Test Load | 100 kN |
| Maximum Crosshead Travel | 500 mm |
| Machine Weight | 1450 kg |
| Load Measurement Accuracy | ±0.5% of reading (from 1% FS) |
| Load Control Stability | ±1% of reading |
| Compliant Standards | JJG 276–1988, GB/T 2039–1997, HB 5150–1996, HB 5151–1996 |
| Brand | Qinji |
|---|---|
| Origin | Shanghai, China |
| Model | BV212F |
| Maximum Test Load | 100 kN |
| Crosshead Stroke | 200 mm |
| Furnace Temperature Range | Ambient to 1200 °C |
| Temperature Control Accuracy | ±0.5 °C |
| Temperature Resolution | 0.1 °C |
| Uniform Temperature Zone Length | >150 mm |
| Furnace Chamber Diameter | φ50 mm |
| Furnace Length | 450 mm |
| Load Measurement Accuracy | ±0.5% of reading (from 1% FS) |
| Load Control Stability | ±1% of setpoint |
| Load Resolution | 0.1 N |
| Deformation Measurement | Imported rotary encoder |
| Deformation Range | Up to 25 mm |
| Deformation Accuracy | ±0.5% |
| Crosshead Speed | 0.01–180 mm/min |
| Power Requirement | 3 kW |
| Machine Weight | 850 kg |
| Compliance | JJG276-88, GB/T 2039-1997, HB 5150-1996, HB 5151-1996 |
| Brand | Qinji |
|---|---|
| Origin | Shanghai, China |
| Model | BV212F |
| Instrument Type | Electromechanical |
| Max Test Load | 100 kN |
| Crosshead Travel | 200 mm |
| Furnace Dimensions | Ø50 mm × 450 mm (L) |
| Weight | 850 kg |
| Temperature Range | Ambient to 1200 °C |
| Temperature Control Accuracy | ±0.5 °C |
| Temperature Resolution | 0.1 °C |
| Uniform Temperature Zone Length | >150 mm |
| Load Measurement Accuracy | ±0.5% of reading (from 1% FS) |
| Load Control Stability | ±1% of setpoint |
| Load Resolution | 0.1 N |
| Deformation Measurement | High-precision linear encoder |
| Deformation Range | Up to 25 mm |
| Deformation Accuracy | ±0.5% |
| Drive Speed Range | 0.01–180 mm/min |
| Power Requirement | 3 kW |
| Brand | Qinji |
|---|---|
| Origin | Shanghai, China |
| Model | QJBV-212F |
| Maximum Test Load | 100 kN |
| Crosshead Travel | 200 mm |
| Furnace Chamber Diameter | φ50 mm |
| Furnace Length | 450 mm |
| Host Weight | 850 kg |
| Temperature Range | Ambient to 1200 °C |
| Temperature Control Accuracy | ±0.5 °C |
| Temperature Resolution | 0.1 °C |
| Constant-Temperature Zone Length | >150 mm |
| Load Control Accuracy | ±1% of set value |
| Load Resolution | 0.1 N |
| Deformation Measurement Error | ±0.5% of reading |
| Deformation Range Options | up to 25 mm |
| Load Measurement Accuracy | ±0.5% of reading (from 1% FS) |
| Crosshead Speed Range | 0.01–180 mm/min |
| Power Consumption | 3 kW |
| Brand | Qinsun |
|---|---|
| Origin | Shanghai, China |
| Model | QJ212-10KN |
| Max Test Load | 50 kN |
| Crosshead Stroke | 200 mm |
| Furnace Chamber Diameter | φ50 mm |
| Furnace Length | 450 mm |
| Host Weight | 850 kg |
| Temperature Range | RT to 1200 °C |
| Temperature Control Accuracy | ±0.5 °C |
| Temperature Resolution | 0.1 °C |
| Constant-Temperature Zone Length | >150 mm |
| Load Control Accuracy | ±1% FS |
| Load Resolution | 0.1 N |
| Deformation Measurement | Imported Linear Encoder |
| Deformation Range | Up to 25 mm |
| Deformation Accuracy | ±0.5% FS |
| Load Measurement Accuracy | ±0.5% FS (from 1% FS) |
| Crosshead Speed | 0.01–180 mm/min |
| Power Supply | 3 kW |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | QJ212-100KN |
| Max Test Load | 100 kN |
| Crosshead Travel | 200 mm |
| Overall Dimensions | 1 m (L) × 0.8 m (W) × 2.2 m (H) |
| Machine Weight | 850 kg |
| Load Accuracy | ±0.5% of reading (from 1% FS) |
| Load Control Stability | ±1% of set value |
| Crosshead Speed Range | 0.01–180 mm/min |
| Strain Measurement | High-resolution encoder (range: 25 mm, accuracy ±0.5%) |
| High-Temperature Furnace | Φ50 mm bore × 450 mm length |
| Temp Range | RT to 1200 °C |
| Temp Uniformity | ±0.5 °C |
| Isothermal Zone Length | >150 mm |
| Power | 3 kW |
| Brand | SINOTEST |
|---|---|
| Origin | Jilin, China |
| Manufacturer Type | Direct Manufacturer |
| Equipment Type | Electromechanical |
| Max Test Load | 500 kN |
| Maximum Crosshead Travel | 180 mm |
| Dimensions (L×W×H) | 2220 × 710 × 540 mm |
| Host Weight | 500 kg |
| Brand | SINOTEST |
|---|---|
| Origin | Jilin, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model Series | RDL, RWS |
| Instrument Type | Electromechanical |
| Maximum Test Load | 600 kN |
| Maximum Crosshead Travel | >200 mm |
| Overall Dimensions (W × D) | 2300 × 950 mm |
| Machine Weight | 500–1200 kg |
| Brand | SINOTEST |
|---|---|
| Origin | Jilin, China |
| Manufacturer Type | Direct Manufacturer |
| Equipment Type | Mechanical Loading (Dead-Weight System) |
| Model | RDJ Series |
| Max Test Load | 600 kN |
| Maximum Crosshead Travel | >200 mm |
| Overall Dimensions (W×D) | 2300 × 950 mm |
| Machine Weight | 500–1200 kg |
| Compliance | GB/T 2039–2012, ASTM E139–11, ISO 204, EN 10002-5, JJG 276–2009, GB/T 10120–2013, ASTM E328–2013, ASTM E2714–2013, GB/T 15248–2008 |
| Brand | SINOTEST |
|---|---|
| Origin | Jilin, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | ZYSS Series |
| Instrument Type | Electro-Hydraulic Servo-Controlled |
| Maximum Test Load | 2000 kN |
| Maximum Piston Stroke | 100 mm |
| Overall Dimensions (L×W) | 2300 × 950 mm |
| Machine Weight | 500–1200 kg |
| Brand | SUNS |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Regional Classification | Domestic (China) |
| Model | CTM Series-2 |
| Quotation | Upon Request |
| Instrument Type | Mechanical Loading System |
| Maximum Test Load | 30–100 kN |
| Maximum Crosshead Travel | 0–250 mm |
| Overall Dimensions (W×D×H) | 920 × 670 × 250 mm |
| Machine Weight | 280 kg |
| Brand | W+B |
|---|---|
| Origin | Switzerland |
| Model | LFMZ |
| Instrument Type | Electromechanical |
| Maximum Test Force | 600 kN |
| Maximum Crosshead Travel | 100 mm |
| Dimensions (W×D×H) | 800 × 900 × 3000 mm |
| Weight | 1000 kg |
| Brand | WANCE |
|---|---|
| Origin | Guangdong, China |
| Instrument Type | Mechanical Lever-Based Creep Testing System |
| Models | HTC304A / HTC504A / HTC804A / HTC105A |
| Max Test Load | 30 kN / 50 kN / 80 kN / 100 kN |
| Load Accuracy | ±0.5% of reading (≥5% FS), ±1% (2–5% FS) |
| Load Resolution | 1 N |
| Lever Ratios | 1:40, 1:50, 1:100 |
| Alignment Tolerance | ≤10% |
| Furnace Temp Range | 200–1100 °C |
| Temp Stability | ±2 °C (300–600 °C), ±3 °C (600–900 °C), ±4 °C (900–1100 °C) |
| Temp Gradient | ≤2–4 °C over ≥150 mm isothermal zone |
| Creep Deformation Range | 0–10 mm |
| Deformation Accuracy | ≤±0.5% FS |
| Resolution | 0.001 mm |
| Downrod Stroke | 200 mm |
| Downrod Speed | 2.5 mm/min (fine alignment), 50 mm/min (rapid positioning) |
| Power Supply | 380 V ±10%, 3-phase |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.145-B |
| Instrument Type | Mechanical |
| Max. Test Load | 5 kN |
| Max. Rod Stroke | 40 mm |
| Dimensions (L×W×H) | 2.0 m × 2.0 m × 2.2 m |
| Unit Weight | 300 kg |
| Temperature Range | Up to 200 °C |
| Displacement Resolution | 0.01 mm |
| Measuring Range | 40 mm |
| Compliance | JIS K7115, ASTM D2990, ISO 899-1 |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.145-L |
| Temperature Range | −70 °C to +30 °C (standard) |
| Specimen Dimensions | Parallel section width 2.0 ± 0.2 mm, length 50.0 ± 0.2 mm or 100.0 ± 0.2 mm, thickness 2.0 ± 0.2 mm, grip separation 50 mm or 100 mm |
| Displacement Measurement | Optical scale sensor, resolution ±0.1 mm, max travel 200 mm |
| Heating Rate | 1 °C/min |
| Thermal Medium Volume | ~27 L |
| Power Supply | AC 200 V, 3-phase, 30 A, 50/60 Hz |
| Safety Features | Interlocked safety enclosure, O-ring chucks |
| Footprint (4-station) | W1110 × D830 × H1870 mm, ~320 kg |
| Footprint (6-station) | W1170 × D830 × H1870 mm, ~370 kg |
| Compliance | JIS K6261, ASTM D1329, ISO 2921 |
| Brand | Yuelian / PW |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Instrument Type | Mechanical Load-Driven Creep Tester with Integrated Environmental Chamber |
| Model | PW-CSS14-40A |
| External Dimensions | W100 × H168 × D150 cm |
| Internal Chamber Dimensions | W80 × H85 × D60 cm |
| Temperature Range | −40 °C to +150 °C |
| Humidity Range | 20–98% RH |
| Temperature Uniformity | ±2.0 °C |
| Humidity Uniformity | ±3.0% RH |
| Temperature Resolution | 0.01 °C |
| Humidity Resolution | 0.01% RH |
| Heating/Cooling Rate (Typical) | +3 °C/min (heat-up), −1 °C/min (cool-down) |
| Control System | 7-inch Color Touchscreen Controller with Graphical Program Curve Display |
| Max. Test Stations | 30 |
| Load Capacity per Station | 200–500 g (standard steel weights) |
| Total Power Consumption | ~6 kW, 380 V, 50/60 Hz |
| Safety Protections | Over-temperature, dry-burn, low-water, leakage, and compressor over-current protection |
| Compliance | Designed for ASTM D2990, ISO 899-1, and GB/T 20672 standards |
| Brand | ZKWN |
|---|---|
| Origin | Beijing, China |
| Model | YSRB-300* |
| Instrument Type | Electromechanical |
| Max Test Load | 10 kN |
| Max Plunger Travel | 180 mm |
| Specimen Dimensions | 50×50×50 mm or 40×40×20 mm |
| Overall Dimensions | 500×500×500 mm (H×W×D) / 400×400×200 mm (H×W×D) |
| Net Weight | 50 kg |
| Heating Method | Forced-air oven |
| Temperature Range | Ambient to 300 °C |
| Temp. Stability | ±2 °C |
| Temp. Ramp Rates | 50±3 °C/h or 10±2 °C/12 min |
| Temp. Resolution | 0.1 °C |
| Deformation Resolution | 0.002 mm |
| Loading Configuration | Three independent test stations (compression via lever-arm mechanical amplification 1:32 |
| Recommended Load Range | 0–1 MPa |
| Heating Chamber Volume | 350×400×400 mm (L×W×H) |
| Compliance | GB/T 20672–2006, DIN 53424 |