Purification Equipment
Filter
Showing 1–30 of 308 results
| Key | Brand: Xinbaili (New Biolink) |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | Adsorption-Based COD Removal Technology |
| Pricing | Available Upon Request |
| Sample Processing | Industrial Wastewater Treatment |
| Brand | Advion Interchim Scientific |
|---|---|
| Origin | France |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | puriFlash® 5.020 |
| Maximum Flow Rate | 300 mL/min |
| Maximum System Pressure | 20 bar |
| Pricing | Available Upon Request |
| Brand | Advion Interchim Scientific |
|---|---|
| Origin | France |
| Model | puriFlash® 5.050 |
| Flow Rate Range | up to 250 mL/min |
| Maximum Pressure | 50 bar |
| Dual-Mode Operation | Compatible with both flash chromatography and preparative HPLC (Prep-HPLC) methods |
| Brand | Agela |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | CH-200P |
| Pricing | Available Upon Request |
| Brand | Agela |
|---|---|
| Origin | Tianjin, China |
| Model | Cleanert V96 |
| Heating Method | Dry-block heating |
| Temperature Range | Ambient +5°C to 80°C |
| Temperature Uniformity | ±1°C |
| Sample Format | 96-well microplate |
| Gas Flow Rate | 0–80 L/min |
| Heating Power | 450 W |
| Sample Capacity | 96 positions |
| Gas Heating Uniformity | Optimized for consistent thermal delivery across all wells |
| Adjustable Gas Manifold Height | Yes |
| Removable Gas Manifold | Yes |
| Brand | Agela |
|---|---|
| Origin | Tianjin, China |
| Model | Cleanert V96 |
| Heating Method | Dry-block heating |
| Temperature Control Range | 10°C to 30°C ambient operating environment |
| Temperature Setting Range | Room temperature +5°C to 80°C |
| Temperature Stability | ±0.5°C (typical at setpoint) |
| Gas Flow Rate | 10–100 L/min (adjustable per channel) |
| Sample Capacity | Configurable for 24-, 48-, or 96-well formats via modular gas manifolds |
| Dimensions (W×D×H) | 360 mm × 287 mm × 367 mm |
| Compliance | Designed for ISO/IEC 17025-compliant laboratories |
| Brand | Agela |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | FL-MH100 |
| Pricing | Available Upon Request |
| Brand | Agela |
|---|---|
| Origin | Tianjin, China |
| Model | NV-15G |
| Heating Method | Dry-block heating |
| Temperature Range | ≥5 °C above ambient to 150 °C |
| Temperature Uniformity | ±0.3 °C |
| Sample Capacity | 15 positions |
| Well Diameter | 19 mm |
| Well Depth | 70 mm |
| Gas Flow Rate | 0–15 L/min (0–100 psi) |
| Power Supply | 220 V / 50 Hz |
| Max. Power | 240 W |
| Net Weight | 4.7 kg |
| Operating Environment | 0–50 °C, ≤85% RH |
| Brand | Agela |
|---|---|
| Origin | Tianjin, China |
| Model | NV15-G |
| Heating Method | Water Bath |
| Temperature Range | >5 °C above ambient to 80 °C |
| Temperature Stability | ±1 °C |
| Sample Tube Diameter | 20 mm |
| Gas Flow Rate | 0–10 L/min |
| Sample Capacity | 8–24 positions |
| Heating Power | 240 W |
| Tube Depth | 70 mm |
| Temp Accuracy | ±0.3 °C (at setpoint) |
| Operating Ambient | 0–50 °C, ≤85% RH |
| Power Supply | 220 V/50 Hz |
| Net Weight | 3.5 kg |
| Brand | Agela |
|---|---|
| Origin | Tianjin, China |
| Model | NV24A-II |
| Sample Capacity | 24 positions |
| Heating Method | Dry-block heating (PTC) |
| Temperature Control | Programmable range with ±0.5 °C stability |
| Endpoint Detection | Optical fiber sensor for precise volume termination at 0.5 mL or 1.0 mL |
| Gas Flow Control | Independent per-channel on/off switching and real-time digital display of flow/pressure |
| Integrated Exhaust | Built-in active exhaust system for volatile organic compound (VOC) removal |
| Compliance | Designed for GLP-compliant laboratories |
| Brand | AIRTECH |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | FFU-4X2E |
| Airflow | Configurable per filter and fan selection |
| External Static Pressure | 50–120 Pa |
| Flow Stability | Engineered for uniform laminar airflow distribution with ≤±5% velocity variation across outlet face |
| Auto-sampling | Not applicable |
| Sample Capacity | Not applicable |
| Brand | AIRTECH |
|---|---|
| Origin | Jiangsu, China |
| Model | MAC-201 |
| Rated Airflow | 200 m³/h (H mode), 160 m³/h (L mode) |
| Flow Stability | High-stability laminar airflow control |
| Filter Efficiency | ≥99.99% @ ≥0.3 µm |
| Noise Level | ≤58 dB(A) |
| Power Supply | AC 220 V, 1φ, 50 Hz |
| Rated Power | ≤30 W |
| Dimensions (W×D×H) | 365 × 365 × 200 mm |
| Filter Specification | 305 × 305 × 50 mm (1 unit) |
| Weight | 11 kg |
| Brand | Allsheng |
|---|---|
| Origin | Zhejiang, China |
| Model | KD200 |
| Heating Method | Dry-block heating |
| Temperature Range | Ambient +5°C to 150°C |
| Temperature Stability | ±0.1°C (display resolution) |
| Sample Capacity | 12 positions |
| Tube Compatibility | 10–20 mL round-bottom or conical tubes |
| Heating Power | 400 W |
| Gas Flow Control | Individual per-channel needle valve |
| Needle Length | 150 mm (adjustable height & lateral position) |
| Dimensions (W×D×H) | 280 × 240 × 500 mm |
| Timer Range | 1 min – 99 h 59 min |
| Safety Features | Over-temperature cutoff, real-time temperature & countdown display, automatic fault detection and alarm |
| Compliance | Designed for GLP-compliant laboratories |
| Brand | Allsheng |
|---|---|
| Origin | Zhejiang, China |
| Model | MD200-1A |
| Heating Method | Dry-block heating |
| Temperature Range | Ambient +5°C to 150°C |
| Temperature Uniformity | ±0.3°C at 40°C (within block) |
| Temperature Accuracy | ±0.5°C @ 40–100°C |
| Sample Capacity | 96 positions |
| Tube Format | 0.2 mL microtubes |
| Nitrogen Flow Rate | 0–15 L/min |
| Heating Power | 200 W |
| Dimensions (W×D×H) | 280 × 240 × 500 mm |
| Display Resolution | 0.1°C |
| Ramp Time (25°C → 150°C) | ≤30 min |
| Safety Features | Over-temperature protection, real-time fault detection & audible alarm |
| Standard Accessories | Adjustable gas manifold with 80 mm stainless steel needles, modular heating block, height-adjustable support stand |
| Brand | Amerlab |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | AE100 |
| Instrument Type | Automated Quantitative Concentrator |
| Temperature Range | Ambient to 250 °C |
| Temperature Control Accuracy | ±1 °C |
| Maximum Sample Capacity per Vial | 100 mL |
| Brand | Amerlab |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | AP300 |
| Instrument Type | Fluoropolymer Distillation System |
| Heating Method | PTC Semiconductor Heating |
| Cooling Method | Integrated Closed-Loop Cooler (No External Chiller Required) |
| Distillation Rate | 70 mL/h (for 65% HNO₃) |
| Ramp Time | 60 min (25°C to 110°C) |
| Endpoint Control | Precision Photoelectric Liquid-Level Sensor |
| Heating Element | PTC Semiconductor Heater |
| Material Construction | PFA/PTFE-lined Chamber & Fluid Pathways |
| Safety Features | Dual Liquid-Level Monitoring (Feed/Pure Acid), Dry-Run & Overflow Prevention, Redundant Temperature Sensing, Onboard Acid Gas Neutralization System (99% Efficiency) |
| Dimensions | 38 × 35 × 60 cm (W × D × H) |
| Brand | Amerlab |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | AP300S |
| Instrument Type | Fluoropolymer (PTFE/PFA) Distillation Apparatus |
| Heating Method | PTC Semiconductor Heating |
| Cooling Method | Integrated Air-Cooled Condenser (No External Chiller Required) |
| Distillation Rate | 70 mL/h (for 65% HNO₃) |
| Ramp Time | 60 min (from 25°C to 110°C) |
| Endpoint Control | Precision Photoelectric Liquid-Level Sensor |
| Dual Independent Pump System | Acid Feed + Waste Drain |
| Safety Interlocks | Real-Time Level Monitoring (Crude Acid Low/High, Pure Acid Overflow), RTC Immersion Temperature Sensing, Self-Limiting PTC Thermal Regulation |
| Acid Vapor Recovery Efficiency | >99% (Integrated Neutralization & Adsorption) |
| Dimensions | 38 × 35 × 60 cm (W × D × H) |
| Material Contact Path | PTFE, PFA, and Quartz Only |
| Brand | Amerlab |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | AP400 |
| Instrument Type | Fluoropolymer Distillation System |
| Heating Method | PTC Semiconductor Heating |
| Cooling Method | Integrated Closed-Circuit Cooler (No External Chiller Required) |
| Distillation Rate | 45 mL/h |
| Ramp Time | 60 min (Room Temperature to 110 °C) |
| Endpoint Control | Precision Photoelectric Liquid-Level Sensor |
| Heating Element | PTC Semiconductor Heater |
| Compliance | Designed for ISO/IEC 17025-compliant laboratories |
| Brand | Analab |
|---|---|
| Origin | France |
| Device Type | Sub-boiling Distiller |
| Capacity | 12 × 125 mL |
| Construction | PFA-coated (400 µm thickness) |
| Compliance | ISO Class 1 Cleanroom Certified |
| Heating Uniformity | ±0.5 °C across surface |
| Operating Principle | Controlled sub-boiling evaporation with condensate isolation |
| Brand | ANAYN |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | CYNS-16K |
| Instrument Type | Vacuum Parallel Evaporator |
| Temperature Range | Ambient to 100 °C |
| Temperature Control Accuracy | ±1 °C |
| Throughput | 16 × 150–200 mL samples |
| Vacuum Pump Flow Rate | 20–30 L/min |
| Ultimate Vacuum | ≤8 mbar |
| Condensation System | Dual-tower cold trap with recirculating chiller |
| Display | 7-inch capacitive touchscreen interface |
| Sealing Interface | PFA-coated lid with threaded glass tube coupling |
| Chamber Volume | ≥8 L, triple-transparent viewing window |
| Safety Features | Low-water-level alarm, solvent recovery buffer bottle, PTFE diaphragm vacuum pump, PEEK/PTFE/glass fluid path |
| Compliance | Designed for GLP-compliant workflows |
| Brand | Annuo |
|---|---|
| Origin | Henan, China |
| Model | SC-4223 |
| Instrument Type | Automated Quantitative Gas Preconcentrator |
| Cold Trap Temperature Range | −30 °C to 300 °C (at 25 °C ambient) |
| Valve & Transfer Line Temperature Range | Ambient to 160 °C |
| Cooling Method | Peltier Thermoelectric |
| Sample Volume | 1–2000 mL |
| Maximum Concentration Ratio | 2000:1 |
| Precision | RSD ≤ 3% |
| Power Supply | AC 220 V, 50 Hz |
| Dimensions | 550 × 260 × 427 mm |
| Weight | ~20 kg |
| Interface Options | RS-232, Ethernet |
| GC Trigger Modes | Time-based or GC reverse control |
| Analysis Time Range | 0.1–999 min |
| Max Power Consumption | 1000 W |
| Brand | Annuo |
|---|---|
| Origin | Henan, China |
| Model | SC-4224 |
| Instrument Type | Automated Quantitative Gas Preconcentrator |
| Temperature Range (Valve & Tubing) | +5°C to 160°C |
| Cold Trap Temperature Range | −50°C to 300°C |
| Sample Volume Capacity | 1–2000 mL |
| Concentration Ratio | Up to 2000:1 |
| Temperature Control Accuracy | RSD ≤3% |
| Reproducibility | RSD ≤3% |
| Sample Introduction | Vacuum Pressure Sampling with MFC Flow Control |
| Cooling Method | Compressor-based |
| Dimensions (W×D×H) | 550 × 260 × 427 mm |
| Power Supply | AC 220 V, 50 Hz |
| Max Power Consumption | 1000 W |
| Weight | ~40 kg |
| Compliance | GB/T 14678–1993 |
| Brand | ANYAN (Hangzhou Anyan Instrument Co., Ltd.) |
|---|---|
| Origin | Zhejiang, China |
| Model | AYAN-25K |
| Instrument Type | Vacuum Parallel Concentrator |
| Temperature Range | Ambient to 100 °C |
| Temperature Control Accuracy | ±1 °C |
| Oscillation Speed | 0–300 rpm |
| Sample Capacity | 25 positions (150–200 mL vials) |
| Timer Range | 0–999 min |
| Heating Method | Water Bath |
| Included Systems | Integrated Vacuum Pump, Dual-Tower Condensation Module, Closed-Loop Water Circulation Chiller |
| Brand | Anyan Instruments |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Country of Manufacture | China |
| Model | AYAN-AUTOM-12G |
| Heating Method | Dry-Block Heating |
| Temperature Range | Ambient to 100 °C |
| Temperature Uniformity | ±1 °C |
| Sample Capacity | 12 positions |
| Gas Flow Control Range | 0–999 mL/min |
| Heating Power | 300 W (typical for dry-block configuration) |
| Tube Compatibility | Accepts 10–29 mm OD round-bottom tubes (standard 12 × 16 mm or 12 × 18 mm formats) |
| Brand | Anyan Instruments |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | AYAN-AUTOM-12S |
| Heating Method | Water Bath |
| Temperature Range | Ambient to 100 °C |
| Temperature Uniformity | ±0.5 °C |
| Sample Vessel Capacity | 50 / 100 / 150 / 200 mL |
| Gas Flow Control | 0–999 mL/min (digital regulation) |
| Sample Positions | 12 |
| Heating Power | 1.2 kW (typical for dual-zone water bath) |
| Brand | Anyan Instruments |
|---|---|
| Origin | Zhejiang, China |
| Model | AYAN-AUTOM-12S |
| Heating Method | Water Bath |
| Temperature Range | 0–100 °C |
| Temperature Uniformity | ±1 °C |
| Sample Capacity | 12 positions |
| Vial Size Compatibility | 50–200 mL |
| Gas Flow Control Range | 0–999 mL/min (adjustable per channel) |
| Precise Endpoint Detection | Optical sensor-based volumetric termination (0.5 / 1 / 2 mL or near-dry) |
| Origin | Zhejiang, China |
|---|---|
| Manufacturer Type | Distributor |
| Product Origin | Domestic (China) |
| Model | AYAN-AUTOM-12S |
| Price | USD 3,950 (FOB) |
| Heating Method | Water Bath |
| Temperature Range | Ambient to 100 °C |
| Temperature Stability | ±0.5 °C |
| Sample Capacity | 12 positions |
| Vial Compatibility | 50–200 mL (adjustable), standard 16–20 mm OD |
| Gas Flow Control | 0–0.8 MPa, 12-channel independent electromagnetic valve regulation |
| Optical Endpoint Detection | Adjustable setpoints at near-dry, 0.5 mL, 1 mL, or 2 mL |
| Timing Range | 0–999 min |
| Auto-refill Function | Yes |
| Dual-seal Hydraulic Door System | Yes |
| Integrated Exhaust Fan with Activated Carbon Filter | Yes |
| Pre-heated Nitrogen Delivery (≈45 °C) | Yes |
| Power Supply | 220 V, 50 Hz |
| Brand | Anyan Instruments |
|---|---|
| Origin | Zhejiang, China |
| Model | AYAN-B100 |
| Feed Rate | 0.5–5.0 L/h |
| Effective Evaporation Area | 0.1 m² |
| Evaporator Internal Diameter | 100 mm |
| Condensation Area | 0.25 m² |
| Collection Vessels | 2 (light & heavy fractions) |
| Ultimate Vacuum | <0.1 Pa |
| Heating Temperature Range | Ambient to 200 °C |
| Motor Power | 120 W |
| Max Rotational Speed | ≤450 rpm |
| Film Thickness | <0.5 mm |
| Brand | Anyan Instruments |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Model | AYAN-B100 |
| Feed Capacity | 2 L |
| Effective Evaporation Area | 0.16 m² |
| Evaporator Internal Diameter | 100 mm |
| Condensation Area | 0.25 m² |
| Collection Vessels | 2 units |
| Operating Vacuum | ≤5 mmHg (≤667 Pa) |
| Film Thickness | <0.5 mm |
| Heating Temperature Range | Ambient to 300 °C |
| Cooling Temperature | −20 °C |
| Motor Power | 240 W |
| Rotational Speed | 300 rpm |
| 刮板材质 | PTFE + SS316L |
| Sealing | Silicone gaskets (optional PTFE) |
| Brand | Anyan Instruments |
|---|---|
| Origin | Zhejiang, China |
| Model | AYAN-B200 |
| Feed Flow Rate | 1.5–10 L/h |
| Effective Evaporation Area | 0.35 m² |
| Evaporator Internal Diameter | 200 mm |
| Condensation Area | 0.55 m² |
| Vacuum Level | < 0.1 Pa |
| Heating Temperature Range | Ambient to 200 °C |
| Wiper Material | PTFE + SS316L |
| Sealing | Fluoroelastomer (FKM) Gaskets (optional PTFE) |
| Motor Power | 120 W |
| Max Rotational Speed | ≤450 rpm |