Air Generator
Filter
Showing 1–30 of 109 results
| Output Flow | 0–10 L/min @ 0.4 MPa |
|---|---|
| Output Pressure | 0–0.5 MPa (factory-set to 0.4 MPa) |
| Pressure Stability | < 0.003 MPa |
| Power Consumption | 550 W |
| Dimensions (W×H×D) | 380 × 570 × 400 mm |
| Net Weight | ~38 kg |
| Compressor Type | Oil-Free Diaphragm |
| Noise Level | ≤52 dB(A) |
| Internal Sealing Material | Low-Sulfur Silicone Rubber |
| Gas Purity | Hydrocarbon-free, Oil-free, Particulate-free (< 0.01 µm), Dew Point ≤ −40 °C @ 0.4 MPa |
| Brand | Anyan |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Model | AYAN-DA5L |
| Output Flow Rate | 0–5 L/min |
| Output Pressure | 0–0.5 MPa |
| Hydrocarbon Content | < 0.1 ppm (after catalytic oxidation) |
| Dew Point | −45 °C |
| Carbon Filter Replacement Interval | Every 1000 operating hours |
| Desiccant | Indicating silica gel (blue-to-pink transition) |
| Compressor Type | Oil-free diaphragm compressor |
| Gas Storage Tank | Electropolished stainless steel with auto-drain |
| Filtration Stages | Dual-stage particulate + activated carbon + catalytic oxidation + molecular sieve (0.5 µm retention efficiency ≥99.99%) |
| Safety Features | Overpressure protection, thermal overload cutoff, low-pressure startup circuit |
| Brand | ATARICO |
|---|---|
| Model | ATEA-3 |
| Type | Laboratory Air Generator |
| Origin | Beijing, China |
| Manufacturer | ATARICO (Domestic Producer) |
| Output Flow Rate | 3000 mL/min |
| Output Pressure Range | 0–0.4 MPa |
| Pressure Stability | <0.002 MPa |
| Dew Point | Not specified (typical for compressed air generators with dual-stage desiccant/activated carbon filtration) |
| Hydrocarbon Content | Not specified (meets GC-grade air requirements per ASTM D6299 and ISO 8573-1 Class 2:2:2 when operated with recommended maintenance) |
| Power Supply | 220 V ±10%, 50 Hz |
| Power Consumption | 0.5 kW |
| Dimensions (W×D×H) | 425 × 220 × 310 mm |
| Net Weight | 32 kg |
| Operating Ambient Temperature | 1–40 °C |
| Relative Humidity | <85% RH (non-condensing) |
| Safety Features | Integrated pressure controller with overpressure cut-off |
| Filtration | Dual-stage activated carbon + coalescing filter |
| Auto-condensate drainage | Yes |
| Noise Level | <55 dB(A) at 1 m |
| Brand | ATARICO |
|---|---|
| Model | ATEA-5 |
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Output Flow Rate | 5000 mL/min |
| Output Pressure Range | 0–0.4 MPa |
| Pressure Stability | <0.002 MPa |
| Dew Point | Not specified (typical for compressed air generators with coalescing + activated carbon filtration) |
| Hydrocarbon Content | Not specified (reduced to <0.1 ppm C₁–C₄ via dual-stage activated carbon) |
| Power Requirement | 220 V ±10%, 50 Hz |
| Power Consumption | 0.5 kW |
| Dimensions (W×D×H) | 425 × 220 × 310 mm |
| Net Weight | 32 kg |
| Operating Ambient Temperature | 1–40 °C |
| Relative Humidity Limit | <85% RH (non-condensing) |
| Brand | ATARICO |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | PUREA120 |
| Output Flow Rate | 120 L/min at 5 bar |
| Dew Point | −15 °C |
| Noise Level | ≤52 dB(A) |
| Power Supply | 230 V, 50/60 Hz |
| Power Consumption | 3.3 kW |
| Filtration Efficiency | Particulates < 0.01 µm |
| Maximum Operating Altitude | 2000 m |
| Ambient Operating Temperature | 5–35 °C |
| Dimensions (W×D×H) | 520 × 950 × 800 mm |
| Weight | 120 kg |
| Brand | ATARICO |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | PUREA90 |
| Dew Point | −15 °C |
| Filtration Grade | < 0.01 µm |
| Max Flow Rate at 5 bar | 90 L/min |
| Noise Level | ≤ 52 dB(A) |
| Power Supply | 230 V, 50/60 Hz |
| Power Consumption | 1.85 kW |
| Operating Ambient | 5–35 °C |
| Max Altitude | 2000 m |
| Dimensions (W×D×H) | 520 × 950 × 800 mm |
| Weight | 110 kg |
| Brand | AYAN Instruments |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | AYAN-ZA10L |
| Price | USD 940 (est.) |
| Hydrocarbon Removal Principle | Oil-Free Compressor |
| Output Flow Rate | 0–10 L/min |
| Output Pressure | 0–0.5 MPa |
| Total Hydrocarbon Content | < 0.1 ppm (as C₁–C₄, measured by FID) |
| Dew Point | −40 °C to +40 °C (adjustable via integrated desiccant dryer and dual-stage filtration) |
| Brand | AYAN Instruments |
|---|---|
| Origin | Zhejiang, China |
| Model | AYAN-ZA5L |
| Hydrocarbon Removal Principle | High-Temperature Catalytic Oxidation |
| Output Flow Rate | 0–5 L/min |
| Output Pressure | 0–0.5 MPa |
| Hydrocarbon Content | <0.1 ppm (C1–C6 total) |
| Dew Point | −40 °C |
| Brand | Beifen Sanpu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | BF-2L |
| Price Range | USD 1,400 – 7,000 (est.) |
| Hydrocarbon Removal Principle | Catalytic Cracking |
| Output Flow Rate | 0–300 mL/min |
| Output Pressure | 100 psi (6.9 bar) |
| Total Hydrocarbon Content | ≤0.1 ppm (as methane equivalent) |
| Dew Point | −10 °C |
| Noise Level | ≤42 dB(A) |
| Input Voltage | AC 220 V, 50 Hz |
| Rated Power | 150 W |
| Weight | 23 kg |
| Dimensions (L×W×H) | 490 × 240 × 380 mm |
| Operating Ambient Temperature | 15–40 °C |
| Relative Humidity | <70% RH (non-condensing) |
| Air Purity Grade | Oil-free, Triple-stage Purified Air |
| Brand | Beifen Sanpu |
|---|---|
| Model | BF-5 |
| Origin | Hebei, China |
| Manufacturer Type | Direct Manufacturer |
| Output Flow | 0–5 L/min (0–5000 mL/min) |
| Output Pressure | 0.4 MPa (standard for GC air supply) / 0.5 MPa (for air input to nitrogen generators) |
| Hydrocarbon Content | <0.1 ppm (HC) |
| Dew Point | –60 °C |
| Filtration Stages | Triple-stage purification (particulate, coalescing, catalytic hydrocarbon removal) |
| Pressure Regulation | Dual-stage precision pressure regulation |
| Safety Features | Over-pressure protection, automatic condensate drain valve |
| Noise Level | ≤42 dB(A) |
| Power Supply | AC 220 V, 50 Hz |
| Rated Power | 180 W |
| Weight | 24 kg |
| Dimensions (L×W×H) | 490 × 240 × 380 mm |
| Operating Temperature | 15–40 °C |
| Relative Humidity | <70% RH |
| Ambient Requirements | Low-dust, non-corrosive environment |
| Brand | Beifen Sanpu |
|---|---|
| Origin | Hebei, China |
| Manufacturer Type | OEM Manufacturer |
| Country of Origin | China |
| Model | BF-3L |
| Hydrocarbon Removal Principle | High-Temperature Catalytic Oxidation |
| Output Flow Rate | 0–3000 mL/min (3.0 L/min) |
| Maximum Output Pressure | 0.4 MPa (4 bar) |
| Hydrocarbon Content | <0.1 ppm (as CH₄ equivalent) |
| Dew Point | –60 °C |
| Noise Level | ≤42 dB(A) |
| Power Supply | AC 220 V, 50 Hz |
| Rated Power | 150 W |
| Net Weight | 23 kg |
| Dimensions (L×W×H) | 490 × 240 × 380 mm |
| Operating Temperature | 15–40 °C |
| Relative Humidity | <70% RH (non-condensing) |
| Ambient Conditions | Low-dust, non-corrosive environment |
| Filtration Stages | Three-stage purification (particulate → desiccant → catalytic hydrocarbon removal) |
| Pressure Regulation | Dual-stage precision pressure regulation |
| Safety Features | Over-pressure relief valve, manual condensate drain port |
| Compliance | Designed for laboratory use in accordance with IEC 61010-1 (Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use) |
| Brand | Beifen Sanpu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | BF-5L |
| Hydrocarbon Removal Principle | High-Temperature Catalytic Cracking |
| Output Flow Rate | 0–5 L/min |
| Output Pressure | 0.5 MPa |
| Total Hydrocarbon (HC) Content | < 0.1 ppm |
| Dew Point | –40 °C |
| Air Purity | Oil-Free, Triple-Stage Purification |
| Pressure Regulation | Dual-Stage Stabilization |
| Safety Features | Overpressure Protection, Manual Drain Valve |
| Noise Level | ≤ 42 dB(A) |
| Input Power | AC 220 V, 50 Hz |
| Rated Power Consumption | 180 W |
| Operating Temperature Range | 15–40 °C |
| Relative Humidity Limit | < 70 % RH |
| Dimensions (L×W×H) | 490 × 240 × 380 mm |
| Net Weight | 24 kg |
| Brand | Boante |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| CO₂ Control Range | Ambient +100 ppm to 2000 ppm |
| O₂ Control Range (MGAR-G) | 0–21% vol |
| (MGAR-D) | 21–100% vol |
| CO₂ Detection Accuracy | ±1 ppm |
| O₂ Detection Accuracy | ±0.1% vol |
| CO₂ Control Precision | ±3% of setpoint |
| O₂ Control Precision | ±5% of setpoint |
| CO₂ Sensor | NDIR with Vaisala CARBOCAP® module |
| O₂ Sensor | Electrochemical cell (RAE Systems) |
| N₂ Input Max Flow | 1.6 L/min |
| CO₂ Output Flow Range | 0.16–1.6 L/min (customizable up to 6 L/min) |
| O₂/Air Output Flow | Adjustable via calibrated rotameter |
| Mixing Chamber Pressure Range | −10 to +10 kPa |
| CO₂ Response Time (0→2000 ppm) | ≤5 s |
| O₂ Response Time (0→21%) | ≤15 s |
| CO₂ Regulation Response Time (100 ppm step) | 15 s |
| O₂ Regulation Response Time (1% step) | 15 s |
| Display | 7-inch capacitive touchscreen |
| Control Algorithm | PID + adaptive fuzzy logic |
| Power Supply | AC 220 V ±10%, 50 Hz |
| Power Consumption | 200 W |
| Operating Temperature | 10–30 °C |
| Humidity Range | 30–80% RH (non-condensing) |
| Enclosure Material | Stainless steel with corrosion-resistant white epoxy coating |
| Calibration Interval | 12 months |
| Compatible Media | Freshwater, synthetic seawater, low-salinity and high-salinity seawater (≤45‰) |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | AEOLUS ZA30 / AEOLUS ZA60 |
| Output Flow | 30 L/min or 60 L/min |
| Output Pressure | 7.6 bar / 108 psi |
| Compressed Air Input Requirement | 8.5–10 bar, oil-free and dry (pressure dew point ≤ −20 °C, ISO 8573-1 Class 1.3.1) |
| Noise Level | < 58 dB(A) |
| Ambient Temperature Range | 15–35 °C |
| Dimensions (L×W×H) | 490×220×625 mm (ZA30), 490×240×625 mm (ZA60) |
| Weight | 25 kg (ZA30), 27 kg (ZA60) |
| Compressed Air Inlet | OD 10 mm or G1/4" |
| Zero-Air Outlet | OD 6 mm or G1/4" |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | BLR |
| Output Pressure | 13 bar |
| Refrigerant | Eco-friendly (R-134a or equivalent) |
| Heat Exchanger Type | High-efficiency brazed plate-fin |
| Dew Point Range | +3 °C to +10 °C |
| Air Outlet Relative Humidity | ≤20% |
| Water Separation Efficiency | ≥99% |
| Inlet–Outlet Temperature Differential | ≤5 °C |
| Power Consumption Reduction vs. Shell-and-Tube | ~50% |
| Brand | ChemTron |
|---|---|
| Origin | Switzerland |
| Model | EZA-1 / EZA-2 |
| Output Flow | 0–1000 mL/min (EZA-1), 0–2000 mL/min (EZA-2) |
| Output Pressure | 0–0.4 MPa |
| Pressure Stability | < 0.003 MPa |
| Filtration Precision | 5 µm |
| Power Consumption | ≤150 W (EZA-1), ≤200 W (EZA-2) |
| Operating Temperature | 1–40 °C |
| Relative Humidity | ≤85% RH |
| Dimensions (W×D×H) | 220×500×510 mm (EZA-1), 220×515×510 mm (EZA-2) |
| Weight | 15 kg (EZA-1), 20 kg (EZA-2) |
| Brand | ChemTron |
|---|---|
| Origin | Switzerland |
| Model | GC3000 |
| Hydrocarbon Removal Principle | High-Temperature Catalytic Cracking |
| Output Flow Rate | 1.5–30 L/min |
| Output Pressure | 4.5–10 bar |
| Total Hydrocarbons (THC) | <0.05 ppm |
| Dew Point | −30 °C |
| Certifications | CE, CSA, FCC |
| Power Supply | 110–120 V / 60 Hz or 220–240 V / 50 Hz |
| Dimensions (H×W×D) | 410 × 550 × 230 mm |
| Weight | 12 kg |
| Inlet Connection | 1/4″ NPT |
| Outlet Connection | 1/8″ NPT |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | GH40L |
| Hydrocarbon Removal Principle | High-Temperature Catalytic Cracking |
| Output Flow Rate | 0–40 L/min |
| Output Pressure | 0–9.5 bar |
| Total Hydrocarbon Content | <0.1 ppm (as methane equivalent) |
| Dew Point | +3 °C |
| Particle Filtration Efficiency | ≥99.9999% at 0.01 µm |
| Internal Tank Material | Electropolished Stainless Steel (AISI 316L) |
| Safety Features | Thermal Cut-off Switch, Spring-Loaded Pressure Relief Valve, Digital Pressure Switch with Adjustable Setpoints |
| Noise Level | ≤58 dB(A) |
| Power Consumption | 1200 W |
| Dimensions (W×D×H) | 470 × 700 × 770 mm |
| Weight | 72 kg |
| Inlet Filtration | Pre-filter for particulates and ambient dust |
| Drive Type | Direct-Coupled Motor (no belt transmission) |
| Compliance | CE, ISO 8573-1 Class 1:2:1 (Air Purity Class), EN 60335-1, EN 61000-6-3 |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | GHS120L |
| Flow Rate | 120 L/min |
| Maximum Pressure | 10 bar (145 psi) |
| Motor Power | 1.5 kW |
| Noise Level | 53 dB(A) |
| Oil Content Class | ISO 8573-1 Class 0 (Certified Oil-Free) |
| Motor Efficiency Class | IE3 |
| Control Mode | Start/Stop |
| Weight | 120 kg |
| Dimensions (W×D×H) | 1025 × 690 × 840 mm |
| Inlet/Outlet Port | G1/2" F |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | GT1500 |
| Output Flow Rate | 1.5 L/min |
| Hydrocarbon (HC) & CO Content | < 0.05 ppm |
| CO₂ Content | < 1 ppm |
| NOₓ & SOₓ Content | < 0.1 ppm |
| Inlet Air Pressure Range | 4.5–10 bar |
| Power Supply | 110–120 V / 60 Hz or 220–240 V / 50 Hz |
| Power Consumption | 220 W |
| Dimensions (H×W×D) | 410 × 550 × 250 mm |
| Weight | 10 kg |
| Certifications | CE, CSA, FCC |
| Inlet/Outlet Fitting | 1/4" compression fitting (standard), optional 1/8" compression outlet |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | P440 |
| Output Flow Rate | 30 L/min |
| Maximum Output Pressure | 5 bar |
| Adjustable Pressure Range | 0–5 bar |
| Tank Volume | 30 L |
| Motor Power | 750 W |
| Noise Level | 58 dB(A) |
| Dimensions (W×D×H) | 340 × 680 × 720 mm |
| Weight | 56 kg |
| Connection | 1/4" compression fitting or 6 mm push-to-connect |
| Protection | Thermal cut-off switch |
| Drive Type | Direct-coupled |
| Pump Type | Oil-free piston pump |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | P640 |
| Output Flow Rate | 60 L/min |
| Maximum Output Pressure | 8 bar |
| Adjustable Pressure Range | 0–8 bar |
| Tank Volume | 30 L |
| Motor Power | 550 W |
| Noise Level | 58 dB(A) |
| Dimensions (W×D×H) | 470 × 640 × 720 mm |
| Weight | 138 kg |
| Air Outlet Connection | 1/4" compression fitting or 6 mm push-to-connect |
| Filter Type | WND30005 Class I Air Filter (Order No. 167640-22) |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | RACK GC |
| Output Flow Rate | 1.8–15.0 L/min |
| Hydrocarbon & CO Content | < 0.1 ppm |
| Inlet Pressure Range | 4.5–10 bar |
| Power Supply | 110–120 V / 60 Hz or 220–240 V / 50 Hz |
| Certifications | CE, CSA, FCC |
| Dimensions | 19-inch rack-mount (483 × 450 × 133 mm) |
| Weight | 15 kg |
| Max. Inlet CO | 50 ppm |
| Max. Inlet HC | 100 ppm |
| Max. Inlet Temperature | 40 °C |
| Outlet Temperature | Ambient + 15 °C |
| Pressure Drop | < 1 bar |
| Inlet Port | 1/4" NPT |
| Outlet Port | 1/8" NPT |
| Power Consumption | 200 W (GC 1800) / 550 W (GC 5000, GC 10000, GC 15000) |
| Brand | CHNTECH |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | THA3L |
| Hydrocarbon Removal Principle | High-Temperature Catalytic Oxidation |
| Output Flow Rate | 0–3 L/min |
| Output Pressure | 0–0.4 MPa |
| Hydrocarbon Content | < 0.1 ppm (non-detectable by FID) |
| Dew Point | ≤ –40 °C (at 0.4 MPa) |
| Noise Level | ≤ 42 dB(A) |
| Power Supply | 220 V AC, 50 Hz |
| Operating Temperature | 15–40 °C |
| Relative Humidity | ≤ 70 % RH (non-condensing) |
| Power Consumption | 150 W |
| Dimensions (L×W×H) | 470 × 240 × 380 mm |
| Weight | 23 kg |
| Output Flow | 0–5000 mL/min @ 0.4 MPa |
|---|---|
| Output Pressure | 0–0.4 MPa |
| Pressure Stability | < 0.003 MPa |
| Noise Level | < 35 dB(A) |
| Power Consumption | 275 W |
| Input Voltage | 220 V ±10% |
| Dimensions (W×D×H) | 480 × 260 × 350 mm |
| Net Weight | ~25 kg |
| Operating Environment | 0–45 °C, RH ≤85% (non-dusty, non-corrosive atmosphere) |
| Compliance | Designed for ISO/IEC 17025-compliant labs |
| Output Flow | 0–8000 mL/min @ 0.4 MPa |
|---|---|
| Output Pressure | 0–0.4 MPa |
| Pressure Stability | < 0.003 MPa |
| Noise Level | < 35 dB(A) |
| Power Consumption | 300 W |
| Input Voltage | 220 V ±10% |
| Dimensions (W×D×H) | 480 × 260 × 350 mm |
| Net Weight | ~25 kg |
| Operating Environment | 0–45 °C, RH ≤85% (non-dusty, non-corrosive atmosphere) |
| Compliance | Designed for ISO/IEC 17025-compliant labs and GLP/GMP environments |
| Brand | Hailong |
|---|---|
| Origin | Shanghai, China |
| Model | HLA-2000II |
| Output Flow Rate | 0–2000 mL/min |
| Output Pressure | 0–0.5 MPa (factory-set at 0.4 MPa) |
| Hydrocarbon Content in Output Air | <0.1 ppm |
| Max Input Hydrocarbon Concentration | <100 ppm |
| Operating Temperature | 0–40 °C |
| Operating Humidity | <85% RH |
| Power Consumption | 145 W |
| Dimensions | 450 × 260 × 365 mm |
| Warranty | 12 months |
| Construction | Electropolished stainless-steel tubing, dual-stage filtration, two-stage pressure regulation, auto-drain stainless-steel storage tank |
| Brand | Haolong |
|---|---|
| Origin | Shanghai, China |
| Model | HLA-5000II |
| Output Flow Rate | 0–5000 mL/min |
| Output Pressure | 0–0.5 MPa (factory-set at 0.4 MPa) |
| Hydrocarbon Content in Output Air | <0.1 ppm |
| Max. Inlet Hydrocarbon Concentration | <100 ppm |
| Operating Temperature | 0–40 °C |
| Operating Humidity | <85% RH |
| Power Consumption | 175 W |
| Warranty | 12 months |
| Construction | Electropolished Stainless Steel Tubing, Integrated Stainless Steel Storage Tank with Auto-Drain |
| Brand | Haolong |
|---|---|
| Origin | Shanghai, China |
| Model | HLA-5LP |
| Output Flow | 0–5000 mL/min |
| Output Pressure | 0–0.5 MPa (factory-set at 0.4 MPa) |
| Hydrocarbon Concentration in Output Air | <0.1 ppm |
| Max. Input Hydrocarbon Concentration | <100 ppm |
| Operating Temperature | 0–40 °C |
| Operating Humidity | <85% RH |
| Power Consumption | 400 W |
| Noise Level | <40 dB(A) |
| Warranty | 12 months |
| Brand | Helon |
|---|---|
| Model | HLA-2LG / HLA-5LG |
| Origin | Shanghai, China |
| Output Flow | 0–2000 mL/min (HLA-2LG) / 0–5000 mL/min (HLA-5LG) |
| Output Pressure | 0–0.5 MPa (factory-set at 0.4 MPa) |
| Hydrocarbon Content | <0.1 ppm (v/v) in output air |
| Dew Point | 0–40 °C |
| Inlet Hydrocarbon Tolerance | ≤100 ppm (v/v) |
| Power Consumption | ≤600 W |
| Dimensions (W×D×H) | 260 × 360 × 670 mm |
| Weight | 29 kg |
| Operating Ambient | 0–40 °C, <85% RH |
| Construction | Electropolished stainless steel tubing, auto-draining stainless steel storage tank, oil-free compressor |
| Purification Technology | HL-A catalytic adsorption system with fully automatic regeneration cycle |