Ash Content Analyzer
Filter
Showing all 9 results
| Brand | Harry Gestigkeit |
|---|---|
| Origin | Germany |
| Model | SVD95/P |
| Power | 2500 W |
| Voltage | 220 V |
| External Dimensions | 450 × 310 × 180 mm |
| Maximum Temperature | 950 °C |
| Heating Time (RT → 950 °C) | < 5 min |
| Crucible Capacity | 8 × Ø34 mm or up to 4 × Ø50 mm |
| Ashing Bed Length | 400 mm |
| Timer Range | 0–120 min with audible alarm |
| Safety Interlock | Lid-activated power cutoff |
| Construction Material | Grade G stainless steel |
| Compliance | CE-marked, designed for ISO 562 / ASTM D3174 / AOAC 942.05 ash content determination |
| Brand | MakeWave |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | HXH-L10 |
| Price Range | USD 14,000 – 42,000 |
| Microwave Power/Frequency | 0–3.2 kW adjustable / 2450 MHz |
| Cavity Volume | 56 L |
| Crucible Capacity | 10 L standard quartz crucible (optional 15 L) |
| Temperature Range | 0–1200 °C (thermocouple-based) |
| Cavity Material | Fully sealed, welded stainless steel with micro-positive pressure design |
| Insulation | Integrated high-efficiency thermal insulation |
| Atmosphere Control | Adjustable inlet for air or inert gas |
| Safety Compliance | GB 4706.21-2008, GB 5959.6-2008 |
| Radiation Leakage | <5 mW/cm² (per national standard) |
| External Dimensions (W×D×H) | 975 × 750 × 1680 mm |
| Brand | MakeWave |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | MKX-R4HB |
| Price Range | USD 14,000 – 42,000 (FOB China) |
| Brand | MingShen Science |
|---|---|
| Origin | Henan, China |
| Model | DMF300 |
| Temperature Range | Ambient to 1000 °C |
| Temperature Accuracy | ±1 °C |
| Temperature Resolution | 1 °C |
| Max. Power | 3.5 kW |
| Supply Voltage | 220 V ±10%, 50/60 Hz |
| Dimensions (W×D×H) | 550×550×550 mm |
| Net Weight | 30 kg |
| Safety Protections | Thermocouple fault detection (open/short/reversed), over-temperature cutoff, automatic heating circuit disconnection |
| Compliance | GB/T 212–2008 |
| Brand | MingShen Science |
|---|---|
| Origin | Henan, China |
| Model | KH-3 |
| Temperature Control Range | 100–1000 °C |
| Temperature Measurement Accuracy | Class 0.2 |
| Temperature Control Stability | ±10 °C |
| Furnace Length | 700 mm |
| Isothermal Zone Length | ≥200 mm |
| Conveyor Speed | 15–70 mm/min |
| Isothermal Uniformity at 815 °C | ±10 °C over ≥150 mm |
| Heating Time (RT → 815 °C) | ≤45 min |
| Rated Power | 3 kW |
| Supply Voltage | 220 V ± 22 V, 50 Hz ± 1 Hz |
| Dimensions (L×W×H) | 1200 × 420 × 505 mm |
| Net Weight | 70 kg |
| Brand | Precisa |
|---|---|
| Origin | Switzerland |
| Model | prepASH 340 Series |
| Temperature Range | 50–1000 °C |
| Weighing Capacity | 120 g |
| Readability | 0.1 mg |
| Sample Throughput | Up to 29 samples per run |
| Programmable Steps | Up to 10 |
| Max Cycle Time | 36 h |
| Gas Options | N₂, O₂, air (0–9 L/min) |
| Compliance | ASTM D3174, D3175, D7582 |
| Software Compliance | FDA 21 CFR Part 11, GLP/GMP-ready audit trail |
| Brand | Precisa |
|---|---|
| Origin | Switzerland |
| Model | prepASH |
| Heating Range | Up to 1000 °C |
| Sample Capacity | 29 positions |
| Balance Resolution | 0.1 mg |
| Atmosphere Options | Air, N₂, O₂ |
| Compliance | ASTM D3172, D3174, D3175 |
| Brand | PULUODY |
|---|---|
| Origin | Shaanxi, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | PLD-508A |
| Heating Power | 4000 W |
| Rated Voltage | AC 220 V / 50 Hz |
| Furnace Chamber Dimensions | 300 × 200 × 120 mm |
| Filter Paper Diameter | 9 cm |
| Porcelain Crucible Capacity | 50 mL |
| Temperature Range | Ambient to 1000 °C |
| Control System | Analog Pointer-Based Temperature Controller with Integrated Ammeter |
| Brand | Zhongke Aobo |
|---|---|
| Origin | Beijing, China |
| Model | TL0610 / TL0910 / TL0612 / TL0912 / TL0614 / TL0914 / TL2010 / TL3010 / TL6010 / TL2012 / TL3012 / TL6012 / TL2014 / TL3014 / TL0217 / TL0417 / TL0617 / TL0917 |
| Max Temperature | 1000 °C / 1200 °C / 1400 °C / 1700 °C |
| Chamber Volume | 2 L to 60 L |
| Power Supply | 220 V/16 A (≤9 L) |
| Heating Rate | ≤30 min (100 → 1000 °C) |
| Surface Temperature at 1000 °C Hold | ≤55 °C |
| Insulation | High-purity ceramic fiber furnace chamber |