SEC 0371K1 Soil Sieve Shaker Kit
| Brand | SEC (USA) |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported Instrument |
| Model | 0371K1 |
| Price Range | USD 5,000–9,999 |
| Sieve Diameter | 4 in (101.6 mm) |
| Unit Weight | 27 lb (12.2 kg) |
| Dimensions (Shaker Base) | 31 × 21 × 10 in (787 × 533 × 254 mm) |
| Dimensions (Sieve Stack Assembly) | 19 × 15 × 7 in (483 × 381 × 178 mm) |
| Power Source | 6 × AA batteries (included) |
| Included Components | 0316D04 Vibratory Sieve Shaker, 3015D04S 4-in Sieve Set (ASTM E11-compliant stainless steel mesh), 7201W05 Precision Electronic Balance (0.01 g readability, 500 g capacity) |
Overview
The SEC 0371K1 Soil Sieve Shaker Kit is a portable, battery-powered laboratory-grade particle size distribution (PSD) analysis system engineered for field-deployable and benchtop soil characterization in environmental monitoring, geotechnical engineering, and regulatory compliance workflows. It operates on the principle of mechanical vibratory sieving—applying controlled vertical oscillation to a stacked series of standardized sieves—to physically separate soil particles by nominal aperture size. This method adheres to ASTM D6913 (Standard Test Methods for Particle-Size Distribution [Gradation] of Soils Using Sieve Analysis) and ISO 11277 (Soil Quality — Determination of Particle Size Distribution). The kit delivers reproducible, operator-independent PSD data without requiring AC mains power—making it suitable for remote sampling sites, mobile labs, or temporary field stations where infrastructure is limited.
Key Features
- Vibratory sieve shaker (Model 0316D04) with adjustable amplitude and fixed 60 Hz frequency, optimized for consistent energy transfer across ASTM E11-compliant 4-inch (101.6 mm) diameter sieve stacks.
- Complete 4-inch stainless steel sieve set (Model 3015D04S) including nested mesh sizes from 2.0 mm down to 0.075 mm (No. 4 to No. 200), all manufactured to ASTM E11 tolerances for mesh opening accuracy and wire diameter consistency.
- Integrated precision electronic balance (Model 7201W05) with 0.01 g readability and 500 g maximum capacity, featuring auto-zero calibration, tare function, and stable weighing platform for post-sieving mass determination.
- Self-contained battery operation using six AA alkaline cells (supplied), enabling >8 hours of continuous shaker runtime under typical load conditions—ideal for multi-sample campaigns without external power dependency.
- Modular mechanical design with rigid aluminum housing and rubber-isolated base to minimize transmission of vibration to supporting surfaces; stack height accommodates up to six sieves plus pan and lid.
- Compact footprint and dual-dimension packaging (base unit + sieve assembly) facilitate transport in standard lab carry cases or field equipment kits.
Sample Compatibility & Compliance
The 0371K1 kit is validated for use with air-dried, disaggregated mineral soils, sediment cores, and stabilized sludge samples within moisture content limits ≤15% w/w. It is not intended for cohesive clays requiring wet-sieving protocols or organic-rich matrices prone to clogging fine meshes. All sieves comply with ASTM E11 Specification for Woven Wire Test Sieve Cloth and Test Sieves, ensuring traceability to NIST-traceable calibration standards. The balance meets OIML R76 Class II requirements for non-automatic weighing instruments used in testing laboratories. Data generated supports reporting under EPA Method 1684 (Particle Size Distribution of Sediments) and ASTM D2487 (Classification of Soils for Engineering Purposes).
Software & Data Management
While the 0371K1 is a hardware-only system with no embedded firmware or onboard software, its output—mass retained per sieve fraction—is fully compatible with standard laboratory data management practices. Users manually record weights into spreadsheet templates aligned with ASTM D6913 Annex A1 (Calculation of Percent Finer Curves) or import values into LIMS platforms via CSV. The balance features RS-232 output (cable optional) for direct serial logging into validated systems compliant with FDA 21 CFR Part 11 when paired with appropriate audit-trail-enabled software. SEC provides printable SOP templates and raw data worksheets compliant with GLP documentation requirements.
Applications
- Regulatory soil screening for contaminated site assessment (e.g., RCRA waste classification based on particle size cutoffs).
- Geotechnical classification per USCS (Unified Soil Classification System) and AASHTO M 145.
- Monitoring erosion control material gradation (e.g., filter fabrics, riprap gradation verification).
- Quality assurance of manufactured soil amendments, topsoil blends, and remediation media prior to field application.
- Educational use in environmental science and civil engineering curricula for hands-on PSD methodology training.
- Pre-screening step prior to hydrometer or laser diffraction analysis to remove coarse fractions and improve measurement accuracy.
FAQ
Does the 0316D04 shaker support variable frequency control?
No—the 0316D04 operates at a fixed 60 Hz vibration frequency, engineered to meet ASTM D6913’s requirement for uniform mechanical energy input during dry sieving.
Can I use non-SEC 4-inch sieves with this shaker?
Yes, provided they conform to ASTM E11 dimensional specifications (101.6 mm OD, 25.4 mm depth, flat flange) and are constructed from corrosion-resistant stainless steel.
Is the 7201W05 balance calibrated before shipment?
Each unit undergoes factory calibration with certified test weights; a calibration certificate traceable to NIST is included in the shipping package.
What maintenance is required for long-term reliability?
Routine cleaning of sieve meshes with soft brushes and compressed air; periodic inspection of shaker mounting bolts and battery contacts; no lubrication or internal servicing is required.
Is this kit suitable for ISO/IEC 17025-accredited laboratories?
Yes—when operated per documented SOPs and supported by annual balance calibration and sieve certification records, the system satisfies technical requirements for accredited PSD testing under ISO/IEC 17025 Clause 7.2.2.
