Adhesion Tester
Filter
Showing 61–64 of 64 results
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | YL-HP6 |
| Instrument Category | Temperature-Controlled Holding Power Tester |
| Temperature Resolution | 0.1 °C |
| Temperature Range | +5 °C to 200 °C |
| Temperature Uniformity | ±1 °C |
| Sample Dimensions | 80 mm × 20 mm |
| Test Area | 80 mm × 20 mm |
| Load Configuration | Six 100 g weights (customizable) |
| Test Plate | Mirror-Finished Stainless Steel (120 mm × 50 mm) |
| Chamber Interior | 304 Stainless Steel |
| Exterior Finish | Powder-Coated Steel |
| Control Interface | Touchscreen LCD |
| Timing Accuracy | ±1 min |
| Starting Temperature | Ambient +5 °C |
| Power Supply | 220 V, 2 kW |
| Internal Chamber Dimensions | Approx. 60 cm × 35 cm × 36 cm |
| Rolling Applicator | Optional Manual or Motorized Roller (sold separately) |
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | YL-HP6B-T2 |
| Temperature Resolution | 0.1 °C |
| Specimen Dimensions | 80 mm × 20 mm |
| Test Area | 80 mm × 20 mm |
| Display & Control | Touchscreen LCD Interface |
| Rolling Application | Manual or Motorized Roller (Optional) |
| Timing Accuracy | ±1 min |
| Starting Temperature | Ambient +5 °C |
| Applied Loads | Six 100 g weights (customizable) |
| Temperature Range | Ambient +5 °C to 200 °C |
| Temperature Uniformity | ±1 °C |
| Heating Chamber Material | Interior 304 Stainless Steel, Exterior Powder-Coated Finish |
| Chamber Internal Dimensions | Approx. 600 mm × 350 mm × 360 mm (W×D×H) |
| Power Supply | 220 V AC, 2 kW |
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | YL-S90RF |
| Instrument Classification | Electronic Peel Strength Tester |
| Capacity Options | 10N, 20N, 50N, 100N, 200N, 500N, 1 kN (dual-range configuration available) |
| Display | PC-based interface with dedicated software |
| Force Resolution | 1/500,000 full scale |
| Force Accuracy | ±0.3% FS |
| Travel Resolution | 1/500,000 |
| Maximum Travel | 500 mm / 800 mm (configurable) |
| Test Width | ≤110 mm |
| Speed Range | 0.1–500 mm/min (software-controlled, step motor-driven) |
| Force Units | kgf, N, lbf, g, ton, MPa |
| Stop Modes | Overload stop, emergency stop, specimen rupture auto-stop, upper/lower limit trigger, auto-return |
| Test Modes | Tensile, compression, peel, tear, shear, ring tack |
| Compliance Standards | GB/T 2792, ASTM D3330, GB/T 12914–1991, GB 13022–91, GB/T 1040–92, GB 2792–81, GB/T 14344–9, GB/T 2191–95, QB/T 2171–95, GB/T 10003–2008 |
| Dimensions (W×D×H) | 40×37×92 cm or 40×37×120 cm |
| Weight | 28 kg / 35 kg |
| Power Supply | 220 V, 50/60 Hz, 10 A |
| Motor & Drive | Stepper motor + precision ball screw transmission |
| Transmission Efficiency | >85% |
| Interface | USB & RS-232 |
| Standard Accessories | One set of peel fixtures, PC software, USB/RS-232 cable |
| Optional | Client-supplied desktop PC |
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | YL-S91RF |
| Instrument Category | Electronic Peel Test Machine |
| Capacity Options | 10N, 20N, 50N, 100N, 200N, 500N, 1 kN (dual-range configuration available) |
| Force Resolution | 1/500,000 full scale |
| Force Accuracy | ≤ ±0.5% FS |
| Travel Resolution | 0.005 mm |
| Test Stroke | 500 mm |
| Test Width | 55 mm |
| Speed Range | 5–500 mm/min (software-controlled) |
| Power Supply | 220 V, 50/60 Hz, 10 A |
| Motor Type | Stepper motor with precision ball screw and timing belt drive |
| Dimensions (W×D×H) | 40 × 30 × 70 cm |
| Weight | ~28 kg |
| Standard Accessories | One set of peel fixtures, PC-based control software, USB interface cable |
| Compliance Standards | GB/T 2792, ASTM D3330, GB/T 12914, GB 13022, GB/T 1040, GB/T 14344, GB/T 2191, QB/T 2171 |
| Safety Protections | Upper/lower stroke limit switches, overload force cutoff, emergency stop, automatic halt on specimen failure, programmable upper/lower limits, auto-return function |
| Software Features | Multi-test mode support (peel, tensile, bend, shear, tear), real-time force-displacement curve plotting, calculation of average peel force, yield force, modulus, elongation |