Amplifier
Filter
Showing all 17 results
| Brand | AND/A&D |
|---|---|
| Origin | Japan |
| Model | SV-10 |
| Viscosity Range | 0.3–10,000 mPa·s |
| Repeatability | ±1% (std. dev.) |
| Accuracy | ±3% (1–1,000 mPa·s) |
| Operating Temp. Range | 0–160 °C (0.1 °C resolution) |
| Excitation Frequency | Fixed at 30 Hz |
| Sensor Material | Gold-plated SUS304 stainless steel |
| Power Supply | AC adapter (100 V AC) |
| Interface | RS-232C |
| Software Included | WinCT-Viscosity (Windows) |
| Brand | Advantec (Tamasaki) |
|---|---|
| Origin | Japan |
| Model | DRA430DC |
| Heating Method | Natural Convection |
| Temperature Range | 40–300 °C |
| Temperature Control Accuracy | ±1 °C at 300 °C |
| Temperature Uniformity | ±10 °C at 300 °C |
| Ramp Time (RT → 300 °C) | ~60 min |
| Internal Dimensions (W×D×H) | 460 × 475 × 450 mm (effective height: 418 mm) |
| External Dimensions (W×D×H) | 590 × 635 × 810 mm |
| Chamber Volume | ~98 L |
| Shelf Capacity | 9 positions @ 45 mm spacing |
| Exhaust Ports | 2 × φ28 mm |
| Power Supply | AC 100 V, 50/60 Hz, 12 A |
| Net Weight | ~50 kg |
| Safety | Dual independent thermal protection (PID controller + mechanical overheat cutoff) |
| Brand | ADVANTEC |
|---|---|
| Origin | Japan |
| Model | KGS-04 |
| Filter Diameter | 25 mm |
| Effective Filtration Area | 0.13 cm² |
| Funnel Capacity | 110 mL |
| Support Mesh | PTFE (0.6 mm wire diameter) |
| Weight | 370 g |
| Packaging Dimensions | 215 × 180 × 90 mm |
| Net Weight | 370 g |
| Gross Weight | 410 g |
| Brand | Advantec |
|---|---|
| Origin | Japan |
| Model | KGS-47 |
| Filter Diameter | Φ47 mm |
| Pre-filter Diameter | Φ35 mm |
| Effective Filtration Area | 9.6 cm² |
| Funnel Capacity | 320 mL |
| Max Graduated Volume | 250 mL |
| Support Mesh | Stainless Steel, 100 Mesh |
| Weight | 625 g |
| Packaging Dimensions | 200 × 300 × 110 mm |
| Net Weight | 625 g |
| Brand | Alphalas |
|---|---|
| Model | UPD-30-VSG-P |
| Detector Material | Si PIN |
| Spectral Range | 320–900 nm |
| Rise Time | < 30 ps |
| Bandwidth | > 12 GHz |
| Active Area Diameter | 0.2 mm |
| Responsivity | ~0.4 A/W @ 633 nm |
| Output Polarity | Positive |
| Connector | SMA |
| Bias Voltage | 0 V (photovoltaic mode) or –5 V (reverse bias) |
| Operating Temperature | –10 to +50 °C |
| Brand | A&D (Tamasaki) |
|---|---|
| Origin | Japan |
| Model | GX-8202M |
| Capacity | 8.2 kg |
| Readability | 0.01 g |
| Repeatability | 0.01 g (SD) |
| Linearity | ±0.03 g |
| Stabilization Time (FAST mode) | ~1.5 s |
| Pan Size | 270 × 210 mm |
| Pan Material | SUS316 Stainless Steel |
| Dimensions (W×D×H) | 300 × 355 × 111 mm |
| Weight | ~9.3 kg |
| Ingress Protection | IP65 |
| Interface | RS-232C (D-Sub 9-pin male) + USB Mini-B (dual-channel) |
| Standard Accessories | AC Adapter, USB Cable (1.8 m), Display Cover, Simplified Draft Shield |
| Brand | Anritsu |
|---|---|
| Origin | Japan |
| Model | AH15199B |
| Frequency Range | 200 kHz – 105 GHz (-3 dB) |
| -6 dB Bandwidth | up to 135 GHz |
| Small-Signal Gain | 15.5 dB (typ.) |
| Output Linearity | 2.0 Vpp (typ.) |
| Power Consumption | 1.5 W (typ.) |
| Input/Output Connector | W-type |
| Dimensions | 36 mm × 18 mm × 18 mm |
| Dedicated Power Supply | AH15199B-01 |
| Brand | Artifex |
|---|---|
| Origin | Germany |
| Model | TZA500 |
| Input Current Range | 100 nA – 100 mA (6 decades) |
| Noise-Equivalent Current (RMS) | 30 pA (at 100 nA range) |
| Rise Time | 45 µs (weak signal, −1→+1 V), 65 µs (strong signal, −10→+10 V) |
| Gain Control | USB & hardwired digital interface |
| Output Interface | BR21 and DB25 |
| Linearity | ±0.1–0.2 dB |
| Accuracy | ±1% |
| Power Supply | AC wall adapter |
| Dimensions (1-channel) | 105 × 45 × 116 mm (W×H×L) |
| Brand | Alphalas |
|---|---|
| Origin | Germany |
| Model | BBA-10 |
| Type | Ultra-fast broadband DC-coupled pulse amplifier |
| Bandwidth | DC to >1 GHz (typ.) |
| Rise time | <350 ps (typ.) |
| Gain | up to 40 dB (adjustable) |
| Output voltage swing | ±2.5 V into 50 Ω |
| Input impedance | 50 Ω |
| Output impedance | 50 Ω |
| Power supply | ±15 V DC |
| Operating temperature | 0–50 °C |
| Brand | CocoResearch |
|---|---|
| Origin | Japan |
| Model | RR-2401 / RRL-2401 |
| Measurement Ranges | 150 Ω / 1.5 kΩ / 10 kΩ / 40 kΩ |
| Resolution | 0.01 Ω / 0.1 Ω / 1 Ω / 10 Ω (per range) |
| Analog Output | 16-bit, 0–5 V / 0–10 V / 4–20 mA (configurable) |
| Power Supply | DC 12 V / 24 V / 48 V (wide-range input) |
| Mounting | 24 mm × 48 mm DIN rail panel cutout |
| Optional Outputs | Simultaneous analog + CAN 2.0A/B (ISO 11898-2 compliant) |
| Zero & Span Calibration | User-adjustable via front-panel or remote command |
| Brand | SANWA |
|---|---|
| Origin | Japan |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | HL2000 |
| Price | Upon Request |
| Channel Count | 1 (2nd channel optional) |
| Frequency | 400 kHz |
| Measurement Range | 0.4–10 m |
| Resolution (Measurement & Display) | 1 cm |
| Data Update Interval | 1 s |
| Beam Angle (Half-Power Full Width) | 6° |
| Power Supply | AC 100–240 V ±15% |
| Power Consumption | 10 VA |
| Display | Backlit LCD |
| Alarm Outputs | 2 upper + 2 lower per channel, relay contacts (AC 250 V / DC 30 V, 5 A) |
| Analog Output | 4–20 mA (16-bit resolution), 1 output per channel (max. load resistance: 450 Ω) |
| Communication Interface | RS-232C (≤10 m transmission distance) |
| Operating Temperature | Transmitter: −10 to +60 °C |
| Sensor | −5 to +60 °C |
| Enclosure Rating | Transmitter IP54 |
| Housing Material | Painted steel (transmitter), PVC (sensor housing & cable) |
| Dimensions (Transmitter) | 280 W × 92.5 D × 322 H mm |
| (Sensor) | Ø80 × 95 mm |
| Cable Length | 20 m |
| Weight | Transmitter 3.6 kg |
| Packaging | 530 × 410 × 360 mm, 11 kg |
| Brand | SANWA |
|---|---|
| Origin | Japan |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | SONAC-210 (H-Type) |
| Output Power | 200 W |
| Operating Frequency | 28 kHz |
| Oscillation Method | PLL Auto-Tracking |
| Power Supply | AC 100 V ±10%, 50/60 Hz |
| Dimensions (Oscillator) | 300 × 308 × 107 mm |
| Dimensions (Handheld Horn Assembly, incl. φ9 mm Standard Horn) | Ø42 × 338 mm |
| Weight (incl. Standard Horn) | 4.9 kg |
| Output Cable Length | 1.5 m |
| Power Cord Length | 2.0 m |
| Timer Range | 0.1–9.9 s |
| Packaging Dimensions | 410 × 410 × 250 mm |
| Net Weight | 8.0 kg |
| Brand | SANWA |
|---|---|
| Origin | Japan |
| Model | HD353-A |
| Measuring Range | 0.3–10 m |
| Output | RS-485, 4–20 mA (12-bit), Dual Relay Alarms |
| Resolution | 1 mm (measurement & display) |
| Accuracy | ±0.25% FS (±2.5 cm) |
| Update Interval | 0.5 s |
| Frequency | 50 kHz |
| Beam Angle | 14° (half-power) |
| Power Supply | DC 12–24 V ±10% |
| Power Consumption | 3 W |
| Display | Graphical LCD |
| Enclosure Material | Polypropylene (PP) |
| IP Rating | IP65 (enclosed), IP20 (with cover open) |
| Operating Temperature | −20 to +70 °C |
| Dimensions | Ø93 × 110 mm |
| Weight | 350 g |
| Cable Length | 10 m |
| Mounting Thread | G2 (PF2) |
| Brand | Honda |
|---|---|
| Origin | Japan |
| Model | WDX-600N-I |
| Max Input Power | 600 W |
| Resonant Frequencies | 28 kHz & 75 kHz |
| Effective Radiating Area | 350 mm (W) × 200 mm (D) |
| Dimensions (Transducer) | 390 × 240 × 83 mm |
| Housing Material | SUS304 stainless steel (t = 2.5 mm) |
| Diaphragm Sealing Material | EPDM rubber (t = 3 mm) |
| Weight | 10 kg |
| Packaging Dimensions | 540 × 470 × 250 mm |
| Net Weight | 10 kg |
| Gross Weight | 15 kg |
| System Requirement | Must be operated with a compatible ultrasonic generator/amplifier — not functional as a standalone unit |
| Brand | SATOVAC |
|---|---|
| Origin | Japan |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | CT-D-600 |
| Quotation | Upon Request |
| Compatible Pump Displacement | ≤ 600 L/min |
| Brand | TAMASAKI (Kyoto) |
|---|---|
| Origin | Japan |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | 12 mL, Series 3-52, 100 pcs/box |
| Capacity | 12 mL |
| Material | Polypropylene (PP) |
| Color | White |
| Packaging Dimensions | 195 × 195 × 85 mm |
| Net Weight per Box | 570 g |
| Sterilization Status | Non-sterile |
| Bottom Geometry | Rounded, Low-Residue Design |
| Brand | CocoResearch |
|---|---|
| Origin | Japan |
| Model | USDB35kHz/20kHz |
| Frequency Options | 20 kHz / 35 kHz |
| Output Power | 3000 W (20 kHz) / 900 W (35 kHz) |
| Welding Force Range | 100–3000 N |
| Positioning Accuracy | ±1 µm |
| Control Interface | Ethernet/IP-enabled HMI with color touchscreen |
| Compliance | Designed for ISO 9001-compliant manufacturing environments |
| Sample Compatibility | Wire-to-wire (0.35–5.5 mm²), wire-to-sheet (0.35–40 mm², thickness 0.2–3.0 mm), sheet-to-sheet (0.2–3.0 mm), foil-to-foil (6–13 µm × N) |
| Primary Materials | Aluminum, copper, nickel, and alloys |