- All
- Favorite
- Popular
- Most rated
| Brand | AnronX |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | APT2000 |
| Pricing | Available Upon Request |
| Brand | AnronX |
|---|---|
| Origin | Jiangsu, China |
| Model | LSS2014 |
| Measurement Principle | Laser Backscatter (90°–180° detection geometry) |
| Measurand | Particulate Matter (PM) in Flue Gas |
| Range | 0–20 mg/m³ (Ultra-Low Mode), Dual-Range Operation Supported |
| LOD | 0.05 mg/m³ |
| Installation Type | In-Situ, Non-Extractive |
| Gas Condition Requirement | Dry, Non-Condensing Flue Gas |
| Compliance Context | Designed for continuous emission monitoring systems (CEMS) per Chinese HJ 76-2017 and compatible with international flue gas monitoring frameworks (e.g., EN 15267, ISO 12141, US EPA Method 9 and Performance Specification PS-11) |
| Brand | AnronX |
|---|---|
| Origin | Jiangsu, China |
| Model | MB22-NH3 |
| Type | Online Gas Analyzer |
| Measurement Principle | Tunable Diode Laser Absorption Spectroscopy (TDLAS) |
| Sample Path Temperature | Fully Heated to ≥180 °C (Adjustable) |
| Detection Limit | Sub-ppm Range (Typical LOD < 0.5 ppmv) |
| Response Time (T90) | < 10 s |
| Optical Path | Multi-Pass Herriott Cell with Pressure Compensation |
| Wavelength Stabilization | Integrated Reference Gas Cell |
| Calibration | Full-Path Zero/ Span Auto-Calibration |
| Environmental Rating | IP65 Enclosure |
| Operating Temperature | −20 °C to +50 °C |
| Power Supply | 220 VAC ±10%, 50/60 Hz |
| Output Interfaces | 4–20 mA, RS485, Modbus TCP, Optional Ethernet/Profibus |
| Brand | AnronX |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | ARX-MA100 |
| Measurement Principle | Optical Scattering (for Particulates), Electrochemical (for SO₂/NO₂/CO/O₃), Photoionization Detection (PID) for TVOC |
| Measured Parameters | TSP, PM₁₀, PM₂.₅, NO₂, CO, SO₂, O₃, TVOC, Temperature, Relative Humidity, Wind Speed, Wind Direction, Atmospheric Pressure |
| Optional Gases | NH₃, H₂S |
| Sampling Pump | Brushless Vacuum Pump with Stable Flow Control |
| Sample Conditioning | Dynamic Heating System (DHS) with Real-time Temperature Feedback |
| Data Transmission | Industrial-grade Multi-protocol Module (RS485, 4G LTE, Ethernet, LoRaWAN) |
| Alarm Function | Full-range Configurable Thresholds with Dry Contact Output for Dust Suppression Integration (e.g., Fog Cannon Trigger) |
| Compliance | Designed to Support ISO 12103-1, EPA EQOA-1 Reference Methods (for comparative monitoring), and GLP-aligned data logging architecture |
| Brand | AnronX |
|---|---|
| Origin | Jiangsu, China |
| Model | AGA800 |
| Measurement Principle | Ultraviolet Differential Optical Absorption Spectroscopy (UV-DOAS) |
| Installation Type | In-situ probe-mounted |
| Response Time | ≤8 s |
| Operating Temperature (Probe) | Up to 400 °C (heated optical path) |
| Target Gases | SO₂, NO, NO₂ (total NOₓ) |
| Calibration | Automated in-situ optical zero/span correction |
| Compliance Context | Designed for continuous emission monitoring systems (CEMS) per HJ 75-2017 & HJ 76-2017 (China), compatible with ISO 12039, EN 15267, and EPA Method 6C/7E requirements |
| Brand | AnronX |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | ARX-C200 / ARX-G310 |
| Instrument Type | Continuous Emission Monitoring System (CEMS) |
| Measurement Accuracy | ±2% of Full Scale (F.S.) |
| Response Time | ≤ 200 s |
| Measured Parameters | SO₂, NO, NO₂, O₂, Particulate Matter (PM), Flue Gas Temperature, Static Pressure, Flow Velocity, Relative Humidity |
| Brand | AnronX |
|---|---|
| Origin | Jiangsu, China |
| Model | LFS800 |
| Measurement Principle | Laser Forward Scattering |
| Sample Type | Wet Flue Gas |
| Measured Parameter | Particulate Matter (PM) |
| Range | 0–5 mg/m³ (Low Range), Dual-Range Auto-Switching |
| Detection Limit | 0.01 mg/m³ |
| Accuracy | ±10% (Gravimetric Reference Method) |
| Isokinetic Sampling Flow Rate | Up to 200 L/min |
| Heating | Full-Path Heated Sampling Line |
| Calibration | Automated Zero and Span Calibration |
| Display | Integrated LED Interface |
| Output | Analog 4–20 mA + Digital RS485/Modbus RTU |
| Compliance | Designed for China’s HJ 75–2017 & HJ 76–2017 CEMS Technical Specifications |
| Brand | AnronX |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | ARX-C200H |
| Instrument Type | Continuous Emission Monitoring System (CEMS) |
| Measurement Accuracy | ±2% F.S. |
| Response Time | ≤120 s |
| Measured Parameters | SO₂, NO, NO₂, O₂, NH₃, Particulate Matter (PM), Temperature, Pressure, Flue Gas Velocity, Relative Humidity |
| Brand | AnronX |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | TDP2021 |
| Pricing | Available Upon Request |
| Brand | AnronX |
|---|---|
| Origin | Jiangsu, China |
| Model | MB11 |
| Instrument Type | Online Gas Analyzer |
| Measurement Principle | Tunable Diode Laser Absorption Spectroscopy (TDLAS) |
| Optical Technique | High-Frequency Scanned Wavelength Modulation Spectroscopy with Dual-Wavelength Differential Compensation |
| Operating Environment | High-Temperature In-Situ or Extractive Sampling |
| Sample Handling | Heated Probe + Heated Sample Line (up to 200 °C) |
| Interference Resistance | Immune to H₂O, CO₂, SO₂, NOₓ, and Particulate Obscuration |
| Output Interfaces | 4–20 mA Analog, RS485 Modbus RTU, Relay Status Outputs, Optional Integrated Humidity Sensor |
Show next