- All
- Favorite
- Popular
- Most rated
| Brand | Avestin |
|---|---|
| Origin | Canada |
| Manufacturer | Avestin Inc., Ottawa, ON |
| Model | EmulsiFlex-D20 |
| Operating Pressure | 35,000 psi (2,413 bar) / Max Continuous: 30,000 psi (2,070 bar) |
| Flow Rate | 20 L/h |
| Minimum Sample Volume | 50 mL |
| Sample Hold-up Volume | <1 mL |
| Drive Type | Electric Single-Plunger Pump |
| Dimensions (W×D×H) | 730 × 600 × 640 mm |
| Weight | 120 kg |
| Power Supply | 3-phase, 50/60 Hz, 230/400 V |
| Construction Material | ASTM A240 316L stainless steel + ceramic wear components |
| Sterilization | Direct steam-in-place (SIP) compatible |
| Compliance | GMP-compliant design, FDA 21 CFR Part 11–ready software architecture, USP <1043> and ISO 22442-1 applicable for bioprocess equipment qualification |
| Brand | AVESTIN |
|---|---|
| Origin | Canada |
| Manufacturer | Avestin Inc., Ottawa, Canada |
| Model | EmulsiFlex-C50 |
| Max Operating Pressure | 30,000 psi (207 MPa) |
| Flow Rate | 15–50 L/h |
| Minimum Sample Volume | 25 mL |
| Drive Type | Pneumatic Dual-Piston |
| Safety | Auto-circuit cutoff with 20% transient overpressure tolerance |
| Construction Material | ASTM-certified 316L stainless steel |
| Sterilization | Direct steam-in-place (SIP), O-ring-free fluid path |
| Compliance | FDA 21 CFR Part 11-ready architecture, GMP-compliant design |
| Optional Accessories | Extrusion filter, heat exchanger |
| Instrument Category | High-Pressure Cell Disruptor |
| Brand | ATS |
|---|---|
| Origin | Canada |
| Manufacturer Type | Direct Manufacturer |
| Origin Category | Imported |
| Model | NANOJ-H10 |
| Instrument Type | High-Pressure Rotor-Stator Homogenizer |
| Dimensions (W×D×H) | 280 × 450 × 260 mm |
| Processing Volume Range | 100–5000 mL |
| Input Power | 500 W |
| Output Power | 320 W |
| Power Supply | 220 V / 50 Hz |
| Speed Range | 10,000–28,000 rpm |
| Brand | ATS |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer | ATS (Producer) |
| Type | High-Pressure Homogenizer |
| Model | AH-PILOT |
| Dimensions (W×D×H) | 500×800×500 mm |
| Processing Capacity | 200–200,000 mL per batch |
| Max Operating Pressure | 1500 bar |
| Feed Flow Rate | 15–40 L/h |
| Max Inlet Viscosity | < 2000 cP |
| Max Inlet Particle Size | < 500 µm |
| Temperature Control | On-Position Cooling (≤20 °C) |
| Motor | 5.5 kW, 3-Phase, 50 Hz, IP55, Class F Insulation |
| Lubrication | Solid Grease |
| Compliance | CE Certified, GMP-Compliant Design |
| Brand | ATS |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Equipment Type | High-Pressure Homogenizer |
| Model | AH22-100 |
| Flow Rate | 500–600 L/h |
| Maximum Operating Pressure | 1000 bar |
| Motor Power | 18.5 kW |
| Compliance | CE Certified |
| Application Scope | Lab-scale to Pilot-scale Processing |
| Sample Compatibility | Suspensions, Emulsions, Cell Lysates, Nanosuspensions, Liposomes, Vaccine Adjuvants |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | M-110P |
| Instrument Type | High-Pressure Homogenizer |
| Drive System | Hydraulic |
| Max Pressure | 30,000 psi |
| Flow Rate | 110–150 mL/min |
| Minimum Sample Volume | 25 mL |
| Interaction Chamber Material | Diamond (U.S. Patented) |
| Piston Material | Zirconia |
| Temperature Control | Integrated Inline Cooling System |
| Power Supply | 220 V AC |
| Brand | Ilshin Autoclave |
|---|---|
| Origin | South Korea |
| Model | NANO DISPERSER (NH2000) |
| Instrument Type | High-Pressure Microfluidic Homogenizer |
| Operating Pressure | Up to 1,500 bar (Max. 2,000 bar) |
| Flow Rate | 2,000 mL/min |
| Inlet Reservoir Capacity | 2,000 mL |
| Interaction Chamber Orifice Sizes | 100 / 200 / 400 µm |
| Dimensions (W×D×H) | 950 × 1900 × 1500 mm |
| Weight | Approx. 1,500 kg |
| Pump System | Hydraulic Unit (220/380 V, 3-phase, 20 hp) |
| Cooling Line | Integrated on High-Pressure Section |
| Back-Flushing System | Yes |
| Monitor & Alarm System | Yes |
| Solidification Prevention Tank | Yes |
| Brand | AVESTIN |
|---|---|
| Origin | Canada |
| Model | LiposoFast LF1 |
| Actuation | Manual |
| Sample Volume per Extrusion | 1 mL (2 × 500 µL syringes) |
| Minimum Sample Volume | 0.1 mL |
| Residual Volume | 0 µL |
| Available Membrane Pore Sizes | 50, 100, 200, 400, 800, and 1000 nm |
| Optional Temperature Control | Water-bath compatible |
| Weight | <2 kg |
| Compliance | Designed for GLP-compliant lab environments |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | HC-5000 |
| Instrument Type | High-Pressure Homogenizer |
| Max Operating Pressure | 5,000 psi |
| Max Flow Rate | 950 mL/min |
| Feed Temperature Range | –15–165 °F (–26–74 °C) |
| Compressed Air Requirement | 28 SCFM at 50 psi, Dew Point: –17.7–1.6 °C |
| Minimum Sample Volume | 100 mL |
| Dimensions | 44 × 44 × 51 cm |
| Weight | 16.8 kg |
| Construction Material | Electropolished 316 Stainless Steel |
| Cleaning | In-line CIP-capable |
| Certification | Validated for Steam Sterilization (SIP) and Autoclave Compatibility |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | M-110S |
| Instrument Type | High-Pressure Homogenizer |
| Operating Pressure Range | 3,000–23,000 psi (20.7–158.6 MPa) |
| Flow Rate | 200–600 mL/min |
| Max Feed Temperature | 75 °C |
| Minimum Sample Volume | 14 mL |
| Compressed Air Requirement | 120 psi @ 50 scfm, dew point 0–35 °F, 15 hp (11 kW) |
| Dimensions | 58 × 53 × 58 cm |
| Weight | 25 kg |
| Interaction Chamber | Fixed-geometry microchannel stainless steel |
| Cooling | Integrated portable chiller system |
| Brand | ATS |
|---|---|
| Origin | Canada |
| Manufacturer | ATS (Producer) |
| Product Type | Imported |
| Model | NF-1 |
| Sample Volume | 0.1–1 mL |
| Membrane Pore Sizes Available | 50, 100, 200, 400, 800, 1000 nm |
| Included Components | 2 × 1000 µL glass syringes, 1 extrusion module, 20 membranes (200 nm & 400 nm standard) |
| Temperature Compatibility | Water-bath compatible (ambient to 60 °C) |
| Residual Volume | ≤1 µL per cycle |
| Weight | <2 kg |
| Optional Upgrades | Mechanical stabilization base, nitrogen-driven pressure control system with adjustable pressure (0.1–6 bar), programmable cycle count and dwell time |
| Brand | ATS |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Region Category | Domestic (China) |
| Model | AMH-MINI |
| Pricing | Upon Request |
| Operating Pressure | 0–2200 bar |
| Throughput | 3–5 L/h |
| Minimum Sample Volume | 7 mL |
| Voltage | 380 V, 3-phase 4-wire |
| Power Consumption | 2 kW |
| Interaction Chamber Configuration | 300 µm Diamond Y/Z-Type Primary Chamber + 100 µm Diamond Secondary Chamber |
| Drive System | Servo-Driven Electro-Cylinder |
| Control System | Siemens PLC + Emerson Servo Motion Control |
| Dimensions (W×D×H) | 709 × 419 × 345 mm |
| Weight | 50 kg |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | M-110EH30 |
| Instrument Type | High-Pressure Homogenizer |
| Max Operating Pressure | 30,000 psi (2070 bar) |
| Max Flow Rate | 450 mL/min |
| Max Feed Temperature | 75 °C |
| Motor Power | 5 HP (3.7 kW) |
| System Fluid Volume | 100 mL |
| Compressed Air Requirement | 50 psi, 1 SCFM, dew point 0–35 °F |
| Minimum Sample Volume | 120 mL |
| Dimensions | 84 × 87 × 148 cm |
| Weight | 205 kg |
| Brand | Avestin |
|---|---|
| Origin | Canada |
| Model | EmulsiFlex-C50 |
| Maximum Operating Pressure | 30,000 psi (200 MPa) |
| Flow Rate | 15–50 L/h |
| Minimum Sample Volume | 25 mL |
| Drive Type | Pneumatic Dual-Piston |
| Chamber Material | ASTM-certified 316L stainless steel |
| Sterilization | In-line steam sterilization (SIP) |
| Compliance | FDA-compliant materials, GMP-compatible design |
| Dimensions (W×D×H) | 450 × 760 × 500 mm |
| Sample Compatibility | Aqueous & organic suspensions, liposomes, emulsions, nanocrystals, cell lysates |
| Brand | AVESTIN |
|---|---|
| Origin | Canada |
| Model | LF1 |
| Sample Volume | 0.1–1 mL |
| Membrane Pore Sizes | 50, 100, 200, 400, 800, 1000 nm |
| Operating Principle | Manual pressure-driven extrusion through polycarbonate track-etched membranes |
| Weight | <2 kg |
| Temperature Compatibility | Compatible with water bath (ambient to 60 °C) |
| Includes | Two 1 mL glass syringes, one extrusion module, fifty 100 nm membranes |
| Optional Accessories | Stabilizing base clamp, nitrogen-driven automated extrusion system |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | HC-8000 |
| Price Range | USD $14,000–$70,000 |
| Instrument Type | High-Pressure Cell Disruptor |
| Max Operating Pressure | 1,000–8,000 psi |
| Max Flow Rate | 1,000 mL/min |
| Feed Temperature Limit | 75 °C |
| Compressed Air Requirement | 57 SCFM at 50 psi, dew point −17.7 to 1.6 °C, 15 hp (11 kW) |
| Minimum Sample Volume | 250 mL |
| Dimensions | 58 × 38 × 58 cm |
| Weight | 26.7 kg |
| Construction Material | Electropolished 316 Stainless Steel |
| Cleaning | CIP-capable high-pressure fluid path |
| Drive Mechanism | Pneumatic, explosion-proof |
| Sterilization Compliance | Autoclavable and SIP-compatible components |
| Brand | AVESTIN |
|---|---|
| Origin | Canada |
| Manufacturer | Avestin Inc., Ottawa, Canada |
| Model | EmulsiFlex-C5 |
| Instrument Type | High-Pressure Homogenizer |
| Operating Pressure Range | 500–30,000 psi (3.4–207 MPa) |
| Sample Volume Range | 7–5,000 mL |
| Flow Rate | 1–5 L/h |
| Dimensions (W×D×H) | 100 × 200 × 300 mm |
| Drive System | Pneumatic Single Plunger |
| Homogenizing Valve | Wear-Resistant Ceramic |
| Temperature Control Range | −25 to 200 °C (via external bath) |
| Sterilization | SIP (Steam-in-Place) and CIP (Clean-in-Place) compliant |
| Materials | Electropolished 316L stainless steel and FDA-compliant ceramic components |
| Regulatory Compliance | Designed and validated per GMP, FDA 21 CFR Part 11 (audit trail capable), ISO 13485, and USP <1043> for sterile processing equipment |
| Brand | ATS Engineering Inc. |
|---|---|
| Origin | Canada |
| Manufacturer | ATS Engineering Inc. |
| Type | High-Pressure Homogenizer |
| Model | Nanoj-H30 |
| Max Operating Pressure | 2000 bar |
| Max Flow Rate | 50 mL/min |
| Minimum Sample Volume | 10 mL (with micro-volume adapter) |
| Drive System | Electric Motor |
| Temperature Control | Outlet Cup Cooling |
| Construction | Modular, GMP/FDA-Compliant Stainless Steel |
| Sealing | Full Metal Seal (O-Ring-Free) |
| Sterilization | Autoclavable Components / SIP-Capable |
| Brand | ATS |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Region Classification | Domestic (China) |
| Model | AE-o |
| Pricing | Upon Request |
| Carrier Type | Lipid Nanoparticle (LNP) |
| Brand | ATS |
|---|---|
| Origin | Canada |
| Manufacturer | ATS (Original Equipment Manufacturer) |
| Product Type | Imported |
| Model | H10 |
| Instrument Category | High-Shear Cell Disruptor |
| Motor | German-sourced, industrial-grade |
| Bearing | SKF |
| Power | 0.5 kW |
| Voltage | 220 V, 50 Hz |
| Speed Range | 10,000–28,000 rpm (7-step infinitely variable control) |
| Tip Linear Velocity | up to 28.5 m/s |
| Net Weight | 9 kg |
| Batch Volume | 100–5,000 mL (tested in water |
| Protection Rating | IP55 |
| Insulation Class | F |
| Explosion-Proof | No |
| Rotor/Stator Material | Stainless Steel SUS304 or optional SUS316L |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | M-110Y |
| Instrument Type | High-Pressure Cell Disruptor |
| Operating Pressure Range | 3,000–23,000 psi |
| Max. Flow Rate | 250–600 mL/min |
| Feed Temperature Range | –25°C to +75°C |
| Minimum Sample Volume | 14 mL |
| Compressed Air Requirement | 57 scfm at 120 psi, 15 hp (11 kW) |
| Dimensions | 28 × 41 × 76 cm |
| Weight | 25 kg |
| Interaction Chamber Material | Diamond or Ceramic |
| Wetted Parts | 300-series Stainless Steel (Chromium-Plated Piston) |
| Integrated Cooling Coil | 17 ft (13 mL volume) |
| Cleaning | CIP-capable (Clean-in-Place) |
| Certification | Explosion-Proof & Portable Design |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | HC-2000 |
| Instrument Type | High-Pressure Homogenizer |
| Max Operating Pressure | 2,000 psi |
| Max Flow Rate | 2,000 mL/min |
| Feed Temperature Range | up to 75 °C (165 °F) |
| Compressed Air Requirement | 24 SCFM at 50 psi, dew point −17.7 °C to 1.6 °C |
| Minimum Sample Volume | 100 mL |
| Dimensions | 44 × 44 × 51 cm |
| Weight | 16.8 kg |
| Construction Material | Electropolished 316 Stainless Steel |
| Drive Mechanism | Pneumatic |
| Clean-in-Place (CIP) | Yes |
| Sterilization Compatibility | Autoclavable & SIP-capable |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | M-700 Series |
| Instrument Type | High-Pressure Cell Disruptor |
| Max Operating Pressure | 40,000 psi |
| Max Flow Rate | 15.6 L/min |
| Inlet Temperature Range | Up to 75 °C |
| Power Supply | 3-Phase, 380 V, 15–50 HP |
| Air Supply | 50–150 psi, 1 SCFM @ 50 psi, Dew Point: 0–35 °F |
| Dimensions | 74 × 180 × 145 cm |
| Weight | 675–900 kg |
| Chamber Material | Diamond-Embedded Stainless Steel |
| Construction | Fully 316L Stainless Steel |
| Brand | ATS |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | AH-1500 |
| Instrument Type | High-Pressure Homogenizer |
| Dimensions (W×D×H) | 440 × 800 × 410 mm |
| Processing Volume Range | 50–15,000 mL |
| Maximum Operating Pressure | 1500 bar (22,500 psi) |
| Optional Peak Pressure | 1800 bar (27,000 psi) |
| Motor Power | 1.5 kW (220 V, 50 Hz) |
| Throughput | Up to 15 L/h |
| Minimum Sample Volume | 25 mL |
| In-Line Cooling System | Yes, maintains sample temperature <20 °C |
| Wetted Materials | ASTM A276 Type 316L stainless steel |
| Cell Disruption Efficiency | >95% for E. coli, >90% for yeast |
| Particle Size Reduction | Sub-100 nm after single-pass homogenization |
| Compliance | CE-marked, GMP-compliant design |
| Weight | 110 kg |
Show next