Automatic Air Quality Monitoring System
Filter
Showing all 17 results
| Brand | AeroQual |
|---|---|
| Model | AQM 60 |
| Measurement Principle | Electrochemical & Metal Oxide Semiconductor (MOS) Sensor Array |
| Gas Parameters | O₃, NO₂, CO, SO₂, CO₂, VOCs |
| Particulate Monitoring | PM₁₀ (optional PM₂.₅) |
| Meteorological Parameters | Temperature, Relative Humidity, Wind Speed, Wind Direction, Noise |
| Data Logging Interval | Configurable down to 2-minute sampling |
| Communication Interfaces | GSM/GPRS/UMTS modem, Ethernet (LAN/WLAN), RS232 |
| Calibration Traceability | NIST-traceable gas standards |
| Enclosure Rating | IP65-rated weatherproof housing |
| Onboard Storage | Internal flash memory (≥16 GB) |
| Power Supply | 12–24 V DC or solar-compatible |
| Brand | Aeroqual |
|---|---|
| Origin | New Zealand |
| Model | AQM65 |
| Particle Detection | PM1, PM2.5, PM10, TSP (via turbidimetric & optical counting methods) |
| Gaseous Pollutants | O₃, NO₂, CO, SO₂, NOₓ, H₂S, CO₂, VOC (ppb–ppm range), CH₄ |
| Measurement Accuracy | ±(1–5 µg/m³ or 1–3% of reading, depending on parameter) |
| Detection Limits | 0.1–10 ppb (gases), 1 µg/m³ (PM) |
| Data Logging | 32 GB internal storage (>5 years at 1-min intervals) |
| Communication | Wi-Fi, Ethernet (LAN), optional 3G/4G cellular |
| Environmental Rating | IP65 |
| Operating Temperature | −35 °C to +50 °C |
| Power Supply | 90–264 VAC, 47–63 Hz (AQM65) |
| Dimensions | 1310 × 510 × 280 mm (AQM65), 483 × 330 × 187 mm (AQS1) |
| Weight | <30 kg (AQM65), <13 kg (AQS1) |
| Brand | Aeroqual |
|---|---|
| Origin | New Zealand |
| Model | AQS 1 |
| Particle Detection | PM₁, PM₂.₅, PM₁₀, TSP (via turbidimetric & optical counting) |
| Gaseous Pollutants | O₃, NO₂, CO, SO₂, NOₓ, H₂S, CO₂, VOC (ppb–ppm range), CH₄ |
| Detection Principle | Nephelometric turbidity (670 nm laser with sheath air), electrochemical (gases), and metal oxide semiconductor (VOC/CH₄) |
| Data Logging | Up to 32 GB internal storage (>5 years at 1-min intervals) |
| Environmental Rating | IP65 |
| Operating Temperature | −35 °C to +50 °C |
| Power Supply | 100–260 VAC (31.3 W typical) or 12 VDC (34.3 W, optional) |
| Dimensions | 483 × 330 × 187 mm (H×W×D) |
| Weight | <13 kg |
| Brand | Aeroqual |
|---|---|
| Origin | New Zealand |
| Model | S300/S500 |
| Measurement Units | ppm, mg/m³, % RH, °C/°F |
| Display Functions | Current, Min/Max/Avg Values |
| Sampling | Active fan-assisted, interchangeable sensor heads |
| Calibration | Zero and span calibration supported |
| Temperature Range | −40 °C to 124 °C |
| Humidity Range | 0–100% RH (non-condensing) |
| Operating Temp. | 0–40 °C |
| Storage | −5 °C to 45 °C, 0–95% RH |
| Enclosure | PC/ABS, IP20 / NEMA 1 |
| Dimensions (w/sensor head) | 195 × 122 × 54 mm |
| Weight | <460 g (<16 oz) with battery & sensor |
| Power | Rechargeable 12 VDC Li-ion (2700 mAh) |
| Analog Output | 0–5 V |
| Digital Interface | RS-232 to USB |
| Data Logging Capacity | Up to 8,188 records |
| Clock | Real-time timestamping |
| Compliance | FCC Part 15 |
| EN 50082-1 | 1997 |
| EN 50081-1 | 1992 |
| Optional Accessories | Industrial protective housing, wall mount, IP41 remote sensor kit, carry case, humidity/temperature probe |
| Brand | Apogee |
|---|---|
| Origin | USA |
| Model | MO-200 |
| Measurement Principle | Electrochemical (Galvanic Cell) |
| Range | 5–100 % O₂ |
| Repeatability | ±0.1 % at 20.9 % O₂ |
| Nonlinearity | <1 % |
| Response Time (t₉₀) | 14 s |
| Operating Temperature | 0–50 °C |
| Relative Humidity Limit | <90 % RH |
| Pressure Range | 60–150 kPa |
| Gas Interference | Immune to CO₂, CO, NO, NO₂, H₂S, H₂, CH₄ |
| Probe Body Dimensions | Ø32 mm × 68 mm |
| Diffusion Cap (A0-001) | Ø35 mm × 35 mm |
| Flow-Through Cap (A0-002) | Ø32 mm × 91 mm |
| Cable Length | 2 m |
| Data Logger Capacity | 99 manual entries |
| Display Unit Dimensions | 126 mm × 70 mm × 24 mm |
| Integrated Temperature Sensor | Yes |
| Heated Membrane | Yes |
| Enclosure Material | Acid-resistant polymer |
| Compliance | CE-marked per EN 61326-1 (EMC), EN 61010-1 (Safety) |
| Brand | Apogee |
|---|---|
| Origin | USA |
| Model | SO-210 Ambient Oxygen Sensor |
| Measurement Range | 0–100% O₂ |
| Accuracy (Stability) | ±0.05% O₂ (under stable ventilation) |
| Repeatability | ±0.001% O₂ (10 ppm) |
| Operating Temperature | −20 to +60 °C |
| Relative Humidity Range | 0–100% RH |
| Pressure Range | 60–140 kPa |
| Response Time (t₉₀) | 12 s |
| Output Signal | 12 mV at 20.95% O₂ |
| O₂ Consumption Rate | 2.2 µmol/day at 20.95% O₂, 23 °C |
| Cross-Sensitivity | Negligible to CO₂, CO, NO, NO₂, H₂S, H₂, CH₄ |
| Power Supply | 12 V for heater, 2.5 V for thermistor excitation |
| Cable | 5 m foil-shielded twisted pair |
| Optional Diffusion Cap | 3.5 cm L × 3.5 cm Ø, 125 vent holes |
| Optional Flow-Through Cap | 3.2 cm L × 3.2 cm Ø, 1/8″ conical hose adapter |
| Integrated Temperature Sensor | NTC thermistor |
| Weight | 175 g |
| Brand | Apogee |
|---|---|
| Origin | USA |
| Model | SO-220 |
| Measurement Range | 0–100% O₂ |
| Accuracy (Stability) | ±0.05% O₂ (under stable ventilation) |
| Repeatability | ±0.001% O₂ (10 ppm) |
| Operating Temperature | −20 to +60 °C |
| Relative Humidity Range | 0–100% RH |
| Pressure Range | 60–140 kPa |
| Response Time (t₉₀) | 12 s |
| Output Signal | 12 mV at 20.95% O₂ |
| O₂ Consumption Rate | 2.2 µmol/day at 20.95% O₂, 23 °C |
| Interferent Resistance | CO₂, CO, NO, NO₂, H₂S, H₂, CH₄ — no interference |
| Power Supply | 12 V for heater, 2.5 V for thermistor activation |
| Cable | 5 m foil-shielded |
| Diffusion Cap (optional) | 3.5 cm L × 3.5 cm Ø, 125 vent holes |
| Flow-through Cap (optional) | 3.2 cm L × 3.2 cm Ø, 1/8″ conical adapter for tubing |
| Integrated Temperature Sensor | Thermocouple |
| Brand | Axetris |
|---|---|
| Origin | Switzerland |
| Model | LGD Series |
| Detection Gases | NH₃, CH₄, H₂O, CO₂, HCl, HF, O₂ |
| Technology | Tunable Diode Laser Spectroscopy (TDLS) |
| Design | OEM-ready modular platform |
| Operating Temperature (heated option) | up to 190 °C |
| Measurement Principle | Non-contact, optical absorption spectroscopy |
| Calibration | Factory-calibrated |
| Cross-Interference | Negligible due to narrow-linewidth laser targeting fundamental ro-vibrational absorption lines |
| Brand | Bigdipper |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Model | wAir2000SR-5s01 (CO, CO₂, NH₃, Toxic Gas, O₂) |
| Detection Parameters | CO (0.1–500/1000 ppm), CO₂ (0–1/5 %v/v), NH₃ (0.1–100 ppm), Toxic Gas (0.1–1000 ppm), O₂ (0–30 %v/v) |
| Temperature Range | −40 to +100 °C |
| Humidity Range | 0–99 %RH |
| Accuracy | ±2% R (CO, O₂), ±1% R (CO₂), ±10% R (NH₃), ±5% R (Tox) |
| Repeatability | Specified per gas |
| Display | 4×16 Character LCD |
| Communication | RS232/RS485 Dual-Mode Serial Interface |
| Power Supply | 220 V AC, <10 W |
| Enclosure Rating | NEMA 4 / IP56 |
| Dimensions | 300 × 500 × 250 mm (W×H×D) |
| Data Logging | 24 Groups (Non-Volatile Memory) |
| Warm-up Time | 3–5 min |
| Mounting | Wall-Mounted Fixed Installation |
| Brand | Erlab |
|---|---|
| Origin | Shanghai, China |
| Model | Halo Sense |
| Monitoring Parameters | VOCs, Acid Gases, Formaldehyde |
| Environmental Operating Range | Temperature 10–30 °C, Relative Humidity 30–80 % RH |
| Power Consumption | 10 W |
| Electrical Supply | 100–240 V AC, 50–60 Hz |
| Sensor Technology | Semiconductor & Electrochemical Sensors (gas-specific) |
| Mounting Options | Benchtop or Wall-Mounted |
| Status Indication | Smart RGB Light Band |
| Data Acquisition | eGuard Software (PC & Mobile) |
| Compliance Context | Designed for GLP-aligned lab environments |
| Brand | Erlab |
|---|---|
| Origin | France |
| Model | Halo Sense |
| Detection Targets | VOCs, Acidic Gases, Formaldehyde |
| Sensor Types | Metal Oxide Semiconductor (VOC), Electrochemical (Acid & Formaldehyde) |
| Power Supply | 100–240 V AC, 50–60 Hz |
| Power Consumption | 10 W |
| Enclosure Material | Lightweight, Durable Plastic |
| Mounting Options | Wall-mounted or Desktop |
| Weight | 1 kg |
| Compliance | CE, RoHS, EN 61000-6-3, EN 61000-6-1 |
| Software Platform | eGuard Cloud-Enabled Monitoring Suite |
| Data Connectivity | Ethernet (RJ45), Wi-Fi (optional), USB for local configuration |
| Alarm Output | Visual (RGB Status Light Band), Audible (85 dB @ 30 cm), Push Notifications via eGuard App |
| Brand | FPI |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Country of Origin | China |
| Model | AQMS-1000M |
| Pricing | Upon Request |
| Pollutant Parameters | O₃ (UV Photometry), SO₂ (UV Fluorescence), NOₓ (Chemiluminescence), CO (NDIR Gas Correlation Filtering), PM₁₀ & PM₂.₅ (Beta Attenuation Method) |
| Meteorological Parameters | Wind Speed, Wind Direction, Temperature, Relative Humidity, Atmospheric Pressure |
| Enclosure Rating | IP55 |
| Operating Temperature Range | -30 °C to +50 °C |
| Communication Interfaces | RS232, Ethernet, USB |
| User Interface | Integrated Industrial Touchscreen PC (Color, High-Resolution) |
| Configuration | Modular Analytical Subsystem Architecture |
| Compliance | HJ 653–2013, HJ 654–2013, HJ 655–2013 (China), US EPA EQOA Designated Methods |
| Brand | FPI |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Domestic |
| Model | Atmospheric Quality Monitoring Solution |
| Pricing | Available Upon Request |
| Brand | WAYEAL |
|---|---|
| Origin | Anhui, China |
| Manufacturer Type | Direct Manufacturer |
| Origin Category | Domestic (China) |
| Model | AQ7000 |
| Quotation | Upon Request |
| Monitored Pollutants | SO₂, NO, NOₓ, CO, O₃, PM₂.₅, PM₁₀ |
| Meteorological Parameters | Wind Speed, Wind Direction, Temperature, Relative Humidity, Atmospheric Pressure |
| Optional Add-ons | Rainfall, Noise Level, Solar Radiation |
| Data Acquisition | Integrated Substation Data Logger with Standardized Digital Interfaces |
| Calibration System | Dynamic Calibrator and Zero Air Generator |
| Compliance Framework | Designed for alignment with HJ 653–2013, HJ 654–2013, ISO 20815, EPA Reference Methods (e.g., EQOA-0017 for PM₂.₅), and GLP/GMP-aligned data integrity practices |
| Brand | WAYEAL |
|---|---|
| Origin | Anhui, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM/ODM) |
| Country of Origin | China |
| Model | AQ7100 |
| Pricing | Available upon Request |
| Measured Parameters | SO₂, NO₂, CO, O₃, PM₂.₅, PM₁₀, TVOC, Temperature, Relative Humidity |
| Brand | ZWINSoft |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | OEM/ODM Producer |
| Country of Origin | China |
| Model | ZWIN-YC06-PLAT |
| Price Range | USD 1,400 – 7,200 (FOB) |
| Measured Pollutants | CO, CO₂, NO₂, PM₂.₅, PM₁₀ |
| Measurement Principle | Optical Scattering (PM), Electrochemical (Gases), Piezoelectric (Noise), Ultrasonic/Cup Anemometry (Wind), Capacitive (RH), Thermistor/RTD (Temp), Piezoresistive (Baro) |
| Display | 7-inch capacitive touchscreen |
| Data Transmission | 3G/4G LTE, RS485, Ethernet |
| Environmental Rating | IP65 enclosure, IP67 sensors |
| Power Options | AC220V ±10% or solar-battery hybrid (optional) |
| Compliance | GB 3095–2012, HJ 653–2013, HJ 93–2013, ISO 12103-1 (dust calibration reference), ASTM D1319 (for hydrocarbon interference mitigation in CO/NO₂ sensing) |
| Brand | ZWINSOFT |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Country of Origin | China |
| Model | Z WIN-AQMS-PLAT |
| Pollutant Parameters | SO₂, NO₂, CO, O₃, PM₂.₅, PM₁₀ |
| Compliance Framework | Designed for integration with China’s National Environmental Monitoring Network (CNEMN), aligned with HJ 653–2013, HJ 654–2013, and GB 3095–2012 standards |