- All
- Favorite
- Popular
- Most rated
| Brand | Masterflex |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported |
| Model | Masterflex L/S® Digital Drive System |
| Instrument Type | Peristaltic Pump |
| Enclosure Rating | NEMA 4X / IP66 |
| Flow Range (with L/S tubing) | 0.006–3400 mL/min (max 54 GPH) |
| Motor | Brushless, Maintenance-Free |
| Speed Accuracy | ±0.1% |
| Turndown Ratio | 6000:1 |
| Display | Graphical LCD |
| Operation Modes | Continuous, Timed Dispense, Repeat Dispense, Volume Dispense |
| Volume Units | mL (0.001–99999), L, gal |
| Repeat Count | 1–9999 |
| Time Interval per Cycle | 1 s–99 h 59 min 59 s |
| Drip Prevention | Yes |
| Interface Languages | 7 selectable |
| Analog I/O | 0–20 mA / 4–20 mA / 0–10 V (speed control & tachometer), Open-collector or dry-contact (direction, start/stop/clean) |
| Brand | Masterflex |
|---|---|
| Origin | USA |
| Model | Reglo Digital Miniflex |
| Pump Type | Peristaltic Pump |
| Channel Count | 4 |
| Roller Count per Head | 6 |
| Display | 5" Capacitive TFT/RGB Touchscreen (12.7 cm) |
| Operating Modes | Continuous, Volume Dispensing, Timed Dispensing |
| Pump Head Compatibility | Miniflex Standard Tubing Cartridge System |
| User Access Levels | Three-Tier Authentication |
| Brand | Masterflex |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | MASTERFLEX ISMATEC REGLO-IPC |
| Instrument Type | Peristaltic Pump |
| Power Supply | 230 VAC, 60 Hz |
| Channel Count | 24 |
| Drive Mechanism | Planetary Gear Motor with 8 Stainless Steel Rotors |
| Display | 5" Capacitive TFT/RGB Touchscreen (12.7 cm), or 4-Digit LED (IPC/IPC-N variant) |
| Control Interface | Touchscreen, 6-Key Keypad, Analog Voltage (0–10 V), TTL Digital Signals |
| Operating Modes | Continuous, Dispense-by-Volume, Dispense-by-Time (with programmable interval/off-time) |
| User Access Levels | Three-Tier Permission System |
| Pump Head Compatibility | Micropump A-Series and B-Series Gear Pump Heads |
| Flow Range | 1.7–4680 mL/min (per channel, dependent on tubing size and pump head) |
| Tube Clamp | Adjustable, Tool-Free Snap-In Cartridge Design |
| Brand | Masterflex |
|---|---|
| Origin | USA |
| Product Type | Peristaltic Pump Accessory |
| Compatible Drive System | ISMATEC® REGLO-IPC / IPC-N Series |
| Channel Count | 4 |
| Input Voltage | 230 VAC, 60 Hz |
| Mounting Type | Adjustable Clamp for Tubing Retention |
| Material | Stainless Steel Housing with Precision-Machined Polymer Components |
| Compliance | CE, RoHS, UL Recognized (per system integration) |
| Brand | PHCbi |
|---|---|
| Origin | Japan |
| Instrument Type | Air-Jacketed CO₂ Incubator |
| CO₂ Detection | Dual Infrared (IR) Sensors |
| Temperature Control Range & Accuracy | RT+5°C to 50°C, ±0.1°C |
| Temperature Uniformity | ±0.25°C |
| CO₂ Concentration Control Range & Accuracy | 0–20%, ±0.15% |
| Humidity Control | 95% RH ±5% RH (Natural Evaporation via Humidification Pan) |
| Chamber Capacity | 230 L |
| External Dimensions (W×D×H) | 770 × 730 × 905 mm |
| Standard Configuration | SafeCell UV Sterilization System, H₂O₂ Decontamination Plate, Password-Protected Electronic Door Lock, Integrated H₂O₂ Generator & Reagent Kit, CO₂ Pressure Regulator, Automatic CO₂ Cylinder Switching System, Standard Gas Auto-Calibration Kit, Copper-Alloy Stainless Steel Shelving, Copper-Alloy Stainless Steel Half-Width Partition, Stackable Mounting Brackets, Castor-Mounted Base |
| Brand | Masterflex |
|---|---|
| Origin | USA |
| Pump Type | Digital Multi-Channel Peristaltic Pump |
| Compatible Pump Heads | Micropump A- and B-Series |
| Flow Range | 1.7–4680 mL/min |
| Drive Mechanism | Planetary Gear Motor with 8 Stainless Steel Rotors |
| Control Interface | 5" Capacitive TFT/RGB Touchscreen (12.7 cm) + 6-Key Keypad + Analog/TTL External Input |
| Operating Modes | Continuous, Dispense-by-Volume, Dispense-by-Time (with configurable interval/off-time) |
| Program Storage | User-Saved Dispense Protocols |
| Flow Stability | Optimized via Low-Pulsation Planetary Drive Architecture |
| Tube Life Extension | Enabled by Precise Roller Compression Control & Consistent Occlusion Geometry |
| User Access Levels | Three-Tier Password-Protected Authorization (Operator, Supervisor, Administrator) |
| Compliance | Designed for GLP/GMP Environments |
| Power Supply | 230 VAC, 60 Hz |
| Brand | Masterflex |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | MasterSense™ Process Pump (L/S® Platform) |
| Instrument Type | Peristaltic Pump |
| Enclosure Rating | IP66 / NEMA 4X |
| Display | 5-inch capacitive TFT/RGB touchscreen (12.7 cm), wide viewing angle |
| Control Modes | Continuous Run, Volume Dispense, Time-Based Dispense |
| User Access Levels | Three-tiered authentication (Operator, Supervisor, Administrator) |
| Connectivity | MasterflexLive™ cloud platform, EtherNet/IP™, PROFIBUS, 0–10 V / 4–20 mA analog I/O |
| Pressure Monitoring | Integrated real-time pressure sensing with configurable alarms |
| Fluid Handling | Drip-free dispensing, programmable acceleration/deceleration ramps |
| Construction | 316 stainless steel housing |
| Firmware | Over-the-air (OTA) wireless updates |
| Compliance | Designed for GLP/GMP environments |
| Brand | PHCbi |
|---|---|
| Origin | Japan |
| Instrument Type | Air-jacketed CO₂ Incubator |
| CO₂ Detection | Dual-channel Infrared (IR) Sensor |
| Temperature Control Range & Accuracy | RT +5°C to 50°C, ±0.1°C |
| Temperature Uniformity | ±0.25°C |
| CO₂ Concentration Control Range & Accuracy | 0–20% vol, ±0.15% vol |
| Humidity Control | 95% RH (±5% RH, natural evaporation via humidification pan) |
| Chamber Capacity | 170 L |
| External Dimensions (W×D×H) | 620 × 730 × 905 mm (MCO-170AICL / MCO-170AICUVHL) or 620 × 755 × 905 mm (MCO-170AICUVL) |
| Key Configurations | SafeCell UV Sterilization System, H₂O₂ Decontamination Module with Generator & Reagent, Password-protected Electronic Outer Door Lock, Independent Inner Door Kit, CO₂ Pressure Regulator, Automatic CO₂ Cylinder Switching System, Standard Gas Auto-Calibration Kit, Copper-Alloy Stainless Steel Shelving & Half-Width Dividers, Stackable Mounting Brackets, Castor Base |
| Brand | Masterflex |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported |
| Model | Masterflex L/S® PTFE Diaphragm Pump |
| Instrument Type | Peristaltic Pump |
| Flow Rate | 80–800 mL/min |
| Maximum Pressure | 50 psi (3.4 bar) |
| Wetted Materials | PTFE |
| Check Valve Function | Maintains prime for up to 2 hours after shutdown |
| Fluid Path Geometry | Optimized to minimize turbulence and dead volume |
| Brand | Masterflex |
|---|---|
| Origin | USA |
| Model | Reglo Digital Miniflex |
| Pump Type | Peristaltic Pump |
| Display | 5" Capacitive TFT/RGB Touchscreen (12.7 cm) |
| Operating Modes | Continuous, Volume Mode, Timed Dispensing |
| Programmable Features | User-Saved Protocols, Drip Prevention, Speed Adjustment in Volume Mode |
| Pump Head | Miniflex 2-Channel 12-Roller Head with Continuous Tubing Path |
| User Access Levels | Three-Tier Permission System |
| Compliance | Designed for GLP/GMP environments with audit-ready operation logging capability |
| Brand | Masterflex |
|---|---|
| Origin | USA |
| Model | ISMATEC® REGLO-IP |
| Drive Type | Digital Planetary Gear Motor with Stainless Steel Rotors |
| Channels | 16 |
| Power Supply | 230 VAC, 60 Hz |
| Display | 5" Capacitive TFT/RGB Touchscreen (12.7 cm) |
| Control Interface | Touchscreen + Analog/TTL External Signal Input |
| Operating Modes | Continuous, Metered Dispensing, Timed Dispensing |
| Programmable Parameters | Flow Rate, Volume, Time, Interval/Off-Time, Speed Ramp |
| User Access Levels | Three-Tier Authentication (Operator, Supervisor, Administrator) |
| Pump Head Compatibility | Micropump A- and B-Series Gear Pump Heads |
| Flow Range | 1.7–4680 mL/min (per channel, dependent on tubing and pump head) |
| Tube Life Optimization | Auto-engagement cartridge housing with consistent occlusion pressure |
| Compliance | Designed for GLP/GMP environments |
| Brand | Masterflex |
|---|---|
| Origin | USA |
| Motor Type | 1/3-hp Brushless DC Motor |
| Enclosure Rating | IP55 |
| Construction | Epoxy-Coated Steel Housing |
| Flow Range | 0.2–26 L/min (0.06–6.9 GPM) |
| Speed Control | 3-Position Potentiometer (5–100% of max RPM) |
| Display | Digital LED Speed Indicator |
| Pump Head Compatibility | Dual I/P Easy-Load® Pump Heads |
| Weight | Lightweight, Single-Hand Portable |
| Regulatory Compliance | CE-marked, RoHS-compliant, Designed for GLP/GMP Environments |
| Brand | Masterflex |
|---|---|
| Origin | USA |
| Model | MASTERFLEX ISMATEC REGLO |
| Pump Type | Digital Positive-Displacement Piston Pump |
| Display | 5" (12.7 cm) Capacitive TFT/RGB Touchscreen |
| Operating Modes | Continuous, Volumetric Dispensing, Timed Dispensing |
| Flow Control | Adjustable Speed, Drip Prevention |
| Pump Head Design | Valveless Plunger-Type (PH00) |
| Maintenance | Single-Moving-Part Architecture |
| User Access Levels | Three-Tier Authentication (Operator, Supervisor, Administrator) |
| Software Integration | MasterflexLive® Cloud Monitoring Platform |
| Compliance Context | Designed for GLP/GMP-aligned lab environments |
| Brand | VWR |
|---|---|
| Origin | Shanghai, China |
| Model | LX-185T100R |
| Instrument Type | Benchtop Centrifuge |
| Speed Range | 500–18,500 rpm |
| Max RCF | 30,130 × g |
| Max Capacity | 6 × 100 mL |
| Noise Level | ≤52 dB(A) |
| Dimensions (W×D×H) | 420 × 680 × 330 mm |
| Rotor Configuration | Horizontal (Swinging-Bucket) |
| Cooling Range | -20 °C to +40 °C |
| Chamber Material | 316 Stainless Steel |
| Display | 7-inch Capacitive Touchscreen (Glove-Compatible) |
| Vibration Amplitude | <0.02 mm |
| Door Lock | Auto-Suction Damping Lock |
| Features | Pre-cooling Function, Integrated Drain Channel, Triple-Damping System |
| Application Scope | Cell, Bacterial, Viral, Protein, Nucleic Acid, and Blood Component Separation |
| Brand | VWR |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | LX-120T2Z |
| Instrument Type | Palm-Sized Centrifuge |
| Speed Range | Up to 12,000 rpm |
| Max RCF | 7,325 × g |
| Capacity | 8 × 1.5/2.0 mL tubes |
| Rotor Type | Fixed-Angle Rotor |
| Application Class | Cellular & Bacterial Separation |
| Dimensions (W×D×H) | 152 × 142 × 122 mm |
| Noise Level | ≤50 dB(A) |
| Motor Suspension | Floating Damping System |
| Display | OLED Screen |
| Safety Features | Auto Rotor Stop on Lid Opening, Liquid Leakage Detection, Over-Speed Protection |
| Brand | Masterflex |
|---|---|
| Origin | USA |
| Model | Masterflex Easy-Load II Peristaltic Pump (L/S® MasterSense Drive) |
| Max Speed | 600 rpm |
| Max Flow Rate | 3400 mL/min |
| Motor Type | Brushless DC, Maintenance-Free |
| Speed Accuracy | ±0.1% |
| Gear Reduction Ratio | 6000:1 |
| Connectivity | EtherNet/IP, Profibus, Wi-Fi, Analog Remote I/O |
| Display | Touchscreen with Glove-Compatible Interface |
| Tube Compatibility | All L/S®-series pump heads |
| Calibration Aid | Graphical LED alignment indicator |
| Safety Features | Drip-proof design, pump-head open sensor, power-status LED |
| Firmware | Over-the-air (OTA) updates via MasterflexLive™ |
| Brand | PHCbi |
|---|---|
| Origin | Japan |
| Model | MDF-MU339HL / MDF-MU539HL |
| Storage Temperature Range | –20 °C to –40 °C |
| Power Consumption | 200 W |
| External Dimensions (D×W×H) | 616×770×1802 mm (MDF-MU339HL-PC) / 793×770×1802 mm (MDF-MU539HL-PC) |
| Cooling Method | Direct Cooling |
| Net Weight | 122 kg (MDF-MU339HL-PC) / 144 kg (MDF-MU539HL-PC) |
| Refrigerant Type | Natural Refrigerant (R290/R600a blend) |
| Compressor Control | Inverter-Driven |
Show next