Basic Instruments
Filter
Showing 1–30 of 33 results
| Brand | A&D |
|---|---|
| Origin | Japan |
| Model | AD-4404 |
| Sampling Rate | 100 Hz |
| Internal A/D Resolution | 1 part in 1,000,000 |
| Display Resolution | 1/16,000 |
| Input Sensitivity | 0.3 µV/d |
| Zero Tracking | Static & Dynamic with Real-time Compensation |
| Communication Interfaces | Standard RS-485 + Current Loop Output |
| Optional I/O Modules | BCD, Relay, RS-232/422/485, Parallel, Analog Output |
| Brand | A&D |
|---|---|
| Origin | Japan |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Origin | Imported |
| Model | AD-4408A |
| Pricing | Upon Request |
| Brand | A&D |
|---|---|
| Origin | Japan |
| Manufacturer | A&D Co., Ltd. |
| Type | Imported Industrial Weight Indicator |
| Model | AD-4408C |
| Pricing | Upon Request |
| Brand | A&D |
|---|---|
| Origin | Japan |
| Model | AD-4532B |
| Input Impedance Compatibility | <10 kΩ |
| Excitation Voltage Options | 5 V (up to four 350 Ω sensors) or 2.5 V (up to four 120 Ω or eight 350 Ω sensors) |
| Calibration | Digital calibration (sensor sensitivity input) or physical load calibration |
| Zero Adjustment Range | ±50% of full-scale output voltage |
| Span Adjustment Range | ±0.25 mV/V to ±3 mV/V |
| Minimum Input Sensitivity | 0.6 µV/d |
| Minimum Display Resolution | 0.12 µV/d |
| Maximum Display | ±999999 |
| Linearity | 0.02% F.S. (within ±1 digit) |
| A/D Conversion Rate | 2000 samples/sec |
| Zero Temperature Coefficient | ±0.5 µV/°C (typ.) |
| Span Temperature Coefficient | ±30 ppm/°C (typ.) |
| Display | 6-digit, 7-segment LED (14 mm height) |
| Keypad | 6 keys |
| Comparison Output | HI/OK/LO relay contacts (0.1 A, 250 V AC) or MOSFET outputs (0.5 A, 30 V DC) |
| Hold Modes | Sample hold, peak hold, valley hold, bipolar hold |
| Analog Amplified Output | ±10 V (fixed at 3.2 mV/V sensitivity), linearity 0.05% F.S., tempco 100 ppm/°C |
| D/A Output | ±10 V, resolution 1/10000, tempco 100 ppm/°C |
| Communication | Modbus-RTU (RS-485) |
| Power Supply | 85–250 V AC, 50/60 Hz, ~20 W |
| Operating Environment | –5 to +40 °C, ≤85% RH (non-condensing) |
| Dimensions (W×H×D) | 96 × 96 × 155 mm |
| Panel Cutout | 92 × 92 mm |
| Optional Interfaces | BCD (AD-4532B-01), RS-232C (AD-4532B-04), ±10 V / 4–20 mA D/A (AD-4532B-07), Ethernet (AD-4532B-08) |
| Brand | ACL Staticide |
|---|---|
| Origin | USA |
| Model | 780/781 |
| Test Range | 10⁵ – 10⁸ Ω (standard) |
| Accuracy | ±10% |
| Power Supply | 9 V DC battery or AC adapter |
| Operating Environment | 0–38 °C, 15–95% RH |
| Compliance | ESD Association ANSI/ESD S20.20 & STM97.1 |
| Display | Dual-color LED (red/green) with audible tone |
| Test Modes | Simultaneous wrist strap + bilateral footwear |
| Auto-ranging | Yes |
| Certifications | Factory calibration certificate included |
| Brand | ACL Staticide |
|---|---|
| Origin | USA |
| Model | 350 |
| Display | 3.5-digit LCD with polarity indication |
| Battery | 9 V alkaline (included) |
| Measurement Ranges | 1″ (0–20 kV, 100 V resolution) |
| Accuracy | ±10% of reading |
| Operating Temperature | 10–40 °C |
| Humidity Range | ≤80% RH non-condensing |
| Dimensions | 107 mm × 61 mm × 23 mm |
| Weight | 5 oz (142 g) |
| Calibration | NIST-traceable certificate included |
| Warranty | 1 year (voided if case opened) |
| Housing | Conductive antistatic polymer with built-in grounding path |
| Sample Distance Dependency | Explicitly defined per probe-to-surface spacing |
| Compliance | Meets ANSI/ESD S20.20 and IEC 61340-5-1 recommended practices for electrostatic field measurement |
| Brand | ACL Staticide |
|---|---|
| Origin | USA |
| Model | ACL-800 |
| Impedance Range | 10³–10¹² Ω/□ (Surface) / 10³–10¹² Ω (Resistance) |
| Voltage Test Options | 10 V / 100 V |
| Relative Humidity Range | 10–90 %RH |
| Temperature Range | 0–37.8 °C (32–100 °F) |
| Electrodes Included | Two 2.5″ 5-lb RTT/RTG circular electrodes |
| Display | LCD digital |
| Power | 9 V alkaline battery |
| Compliance | ASTM F150, EOS/ESD S4.1, S7.1, S11.11, CECC 000500, UL 817 |
| Weight | 425 g |
| Enclosure | Protective molded plastic case |
| Brand | b-plus |
|---|---|
| Origin | Germany |
| Model | KM-B21671-MDI-001-0002 / KM-B21671-MDI-001-0003 / KM-B21671-MDI-001-0004 / KM-B21671-MDI-001-0007 |
| Certifications | IEEE 1588-2008 (PTP v2), IEEE 802.1AS-2020 |
| Operating Temperature | −20 °C to +70 °C |
| Storage Temperature | −40 °C to +85 °C |
| Enclosure Rating | IP20 |
| Dimensions (L×W×H) | 1597 mm × 140 mm × 38 mm |
| Power Supply | 8–32 V DC, crank-safe down to 6.5 V |
| Max Power Consumption | 25 W |
| Ethernet Interfaces | Dual 10GBASE-T (M12), 1× 1GBASE-T (M12), 1× 1GBASE-T management port |
| Sensor Triggering | Hardware-timestamped, PTP-synchronized internal trigger generator |
| Supported Protocols | CAN FD, FlexRay, CSI-2, FPD-Link III, GMSL, Automotive Ethernet (100BASE-T1/1000BASE-T1), 10GBASE-T |
| Software Integration | ADTF-compatible, RESTful API for third-party framework integration |
| Reverse Channel | I²C-based logging and configuration feedback |
| Brand | b-plus |
|---|---|
| Origin | Germany |
| Model | KM-B18005-NEL-001-0001 / KM-B18005-NEL-001-0002 |
| Interface Types | 100/1000BASE-T1 (Automotive Ethernet), 100BASE-TX, 1000BASE-T, MGMT Ethernet |
| Operating Modes | Media Conversion, Network TAP, PHY-layer Diagnostic Mode, Cable Certification Mode |
| Configuration | DIP-switch (standalone), Web-based GUI via MGMT port |
| LED Indicators | Link status, signal quality, mode status, fault conditions |
| Compliance Support | ISO 10605, IEEE 802.3bw (100BASE-T1), IEEE 802.3bp (1000BASE-T1), OPEN Alliance TC8/TC15 test requirements |
| Brand | b-plus |
|---|---|
| Origin | Germany |
| Product Type | Imported Instrument |
| Model Numbers | KM-B18085-NEL-001-0001, KM-B18085-NEL-001-0002 |
| Compliance | ISO 10605, ISO 11452-4, IEEE 802.3ch, IEEE 802.3cg (2.5/5/10BASE-T1), AUTOSAR-compliant interface architecture |
| Brand | BATOP |
|---|---|
| Origin | Germany |
| Model | PCA- |
| Wavelength Options | 800 nm / 1064 nm / 1550 nm |
| Antenna Types | Bow-tie, Parallel-line, Butterfly, Interdigital Array, Finger-gap, Logarithmic Spiral |
| Lens Options | Aspheric Silicon Lenses (Collimating or Focusing) |
| Compliance | RoHS-compliant semiconductor fabrication |
| Packaging | Hermetically sealed, anti-reflection coated Si substrate housing |
| Brand | BATOP |
|---|---|
| Origin | Germany |
| Model | PCA Series |
| Excitation Wavelengths | 800 nm, 1064 nm, 1550 nm |
| Antenna Types | Bow-tie, Parallel-line, Butterfly, Interdigital Array, Finger-gap, Logarithmic Spiral |
| Lens Options | Aspheric Silicon Lenses (Collimating or Focusing) |
| Compliance | ISO 9001-certified Manufacturing |
| Application Domain | Time-Domain Terahertz Spectroscopy (THz-TDS), Pump-Probe Metrology, Ultrafast Carrier Dynamics |
| Auniontech Moku | Delta Multi-Instrument Platform (Lock-in Amplifier) |
|---|---|
| Brand | Auniontech |
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | Moku:Delta Lock-in Amplifier |
| Pricing | Available Upon Request |
| Origin | Japan |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | CPG-100B-1000-P |
| Output Current | Up to 500 A (at 100 V supply, 5 ns pulse width, 300 pH parallel inductance) |
| Pulse Width | Fixed typ. 1–5 ns |
| Repetition Rate | Single-shot to 400 kHz |
| Timing Jitter | < 5 ps (additive) |
| Output Impedance (High-Current Driver Version) | 10–100 mΩ |
| Coupling | AC-coupled |
| RF Connector | Advanced SMA® |
| Trigger Input | 50 Ω terminated, TTL/CMOS compatible |
| Origin | Canada |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | HKiPORT CL-GigE |
| Price Range | USD 1,400 – 4,200 (FOB) |
| Operating Temperature | -40°C to +60°C |
| Interface Compatibility | Camera Link Base (26-pin MDR), GigE Vision v2.0 compliant |
| Power Delivery | PoCL (Power over Camera Link) support |
| GPIO | 4-channel opto-isolated digital I/O |
| Form Factor | External ruggedized enclosure (industrial grade) |
| SDK | eBUS SDK v5.3+ (Windows/Linux x64, C/C++, .NET, Python bindings) |
| Certification | CE, FCC Class A, RoHS compliant |
| Brand | HongKe (HONGKE) |
|---|---|
| Origin | Canada |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Imported |
| Model | HKvDisplay HDI-Pro |
| Price Range | USD 1,400 – 4,200 (FOB Canada) |
| Interface | GigE Vision Input / HDMI 1.4 & DVI-D Output |
| Latency | < 35 ms end-to-end (typical, 1080p60) |
| Form Factor | PCIe Gen2 x4 Low-Profile Card |
| Power | +12 V DC via SATA-style connector |
| SDK Support | eBUS SDK v5.0+ (Windows/Linux x64) |
| Compliance | RoHS 3, CE, FCC Class B, GigE Vision 2.0, GenICam 3.x |
| Brand | Junkens |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Region of Origin | Domestic (China) |
| Model | FCE-3K00 |
| Pricing | Available Upon Request |
| Brand | Lake Shore |
|---|---|
| Origin | USA |
| Model | M81-SSM |
| Channel Configuration | 1–3 Source + 1–3 Measurement Channels |
| Frequency Range | DC to 100 kHz |
| Sampling Rate | 375 kSa/s |
| Dynamic Reserve | >120 dB |
| Phase Noise | <0.0001° RMS (internal ref, 10 kHz, 100 ms TC, 12 dB/oct) |
| THD | <0.1% (DC–100 kHz, typical) |
| Source Resolution | 6-digit frequency display, resolution >100 µHz |
| Measurement Modes | DC, AC RMS/peak, lock-in (X/Y, R/Θ), harmonic detection (up to 9th order) |
| Compliance Voltage/Current | ±10 V / ±100 mA (BCS-10, VS-10) |
| Input Bias Voltage | Near-zero (CM-10) |
| Voltage Sensitivity | Down to nV (VM-10) |
| Current Sensitivity | Down to fA (CM-10) |
| Interface | USB, Ethernet, GPIB |
| Display | 5″ capacitive touchscreen (800×480 WVGA) |
| Warm-up Time | 60 min to full specification |
| Isolation | Measurement common isolated from chassis ground |
| Brand | Liquid Instruments |
|---|---|
| Origin | Australia |
| Model | Moku:Lab |
| Frequency Range | DC–200 MHz |
| Dynamic Reserve | Up to 100 dB |
| Demodulation Modes | Dual-phase (X/Y, R/θ) |
| Input Gain Options | −20 dB / 0 dB / +24 dB / +48 dB |
| Input Impedance | 50 Ω / 1 MΩ |
| Time Constant Range | 40 ns – 0.6 s |
| Filter Roll-off | 6 dB/octave or 12 dB/octave |
| Phase Accuracy | ±0.001° |
| Frequency Resolution | 3.55 µHz |
| Sampling Rate (Oscilloscope Mode) | up to 500 MSa/s |
| Data Logging Rate | up to 1 MSa/s |
| Internal LO Output | up to 200 MHz, adjustable amplitude |
| Brand | Megger |
|---|---|
| Origin | USA |
| Model | FREJA 546 |
| Output | 3× AC Current Channels (60 A rms, 300 V rms per phase) |
| Accuracy | ±0.05% rdg + 0.02% range (voltage/current) |
| Operating Temperature | 0°C to 50°C |
| Weight | 13.2 kg |
| Dimensions | 337 × 172 × 273 mm |
| Brand | Megger |
|---|---|
| Origin | United Kingdom |
| Model | SMRT43D |
| Output Channels | 4 Voltage, 3 Current (expandable to 6 current via VIGEN channel conversion) |
| Max Current Output | 135 A (single-phase, 900 VA peak) |
| Max Voltage Output | 300 V AC (per channel, 150 VA) |
| Touchscreen Display | 7-inch full-color high-resolution TFT LED |
| Compliance | EN 61010-1, EN 61326-2-1, EN 61000-4-x, IEC 61850 GOOSE/SV support |
| Operating Temperature | 0–50 °C |
| Weight | 13.2 kg (with 3 VIGEN modules) |
| Dimensions | 337 × 172 × 273 mm (W×H×D) |
| Brand | Megger |
|---|---|
| Origin | USA |
| Model | SVERKER 900 |
| Output Voltage | 900 V AC (per phase), 900 V DC |
| Output Current | 105 A AC (per channel), 10 A DC |
| Frequency Range | 10 Hz – 600 Hz + DC |
| Channels | 3 independent current sources, 4 independent voltage sources |
| Phase Angle Adjustment | 0°–360°, resolution ≤ 0.1° |
| Isolation | Fully galvanically isolated between all outputs and earth |
| Operating Temperature | 0°C to +50°C |
| IP Rating | IP2X (enclosure), compliant with IEC 61010-1:2010 |
| Safety Compliance | CE marked per IEC 61326-1 (EMC) and IEC 61010-1 (LVD) |
| Dimensions (unit) | 350 × 270 × 220 mm |
| Weight | 14.9 kg |
| Brand | auniontech |
|---|---|
| Origin | Australia |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Moku:Pro |
| Price Range | USD $18,500 – $24,500 (FOB) |
| Origin | Israel |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Ranger |
| Price | USD 90,000 (FOB) |
| UV Sensitivity | 3 × 10⁻¹⁸ W/cm² |
| Field of View (H×V) | 5° × 3.75° |
| Focus Range | 3 m to ∞ |
| Dual-Channel Imaging | UV + Visible Light |
| Auto-Focus | Simultaneous UV & visible channels |
| Video Output | PAL/NTSC, RS-170/CCIR |
| Zoom | 25× optical + 12× digital |
| Display | 8.4″ SVGA LCD (800 × 600), 230 cd/m² |
| Operating Temperature | −20 °C to +55 °C (CDU) |
| Power Input | 9–16 VDC or 110/220 VAC |
| Power Consumption | <15 W |
| Pan/Tilt Range | 340°/360° horizontal, −90°/+60° vertical |
| Pan/Tilt Speed | up to 30°/s (horizontal), 10°/s (vertical) |
| Connector Standard | MIL-C-26482 compliant |
| Brand | Rayscience |
|---|---|
| Origin | South Korea |
| Model | PL Mapping |
| Optical Range | 350–2200 nm (UV-VIS-NIR) |
| Spatial Resolution | 10 µm (1 µm optional) |
| XY Stage | Motorized, 1 µm step resolution, max speed 30 mm/s |
| Spectrometers | EPP2000-VIS (350–1150 nm, 2048-pixel CCD, 1.6 nm res.) & IG512-NIR (900–1700 nm, 512-pixel InGaAs array, 14-bit ADC, 2.5 MHz digitizer) |
| Excitation Flexibility | Interchangeable laser sources (355/405/450/532/635/785 nm typical) |
| Sample Compatibility | 2″ & 4″ epitaxial wafers |
| Film Thickness Measurement | Via white-light reflectance spectroscopy |
| Software | Windows-based acquisition & offline analysis suite with statistical mapping, outlier removal, edge masking, cross-section profiling, and spectral parameter extraction (integrated intensity, peak wavelength, dominant wavelength, FWHM, spectral centroid) |
| Origin | UK |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Model 410 (Single-Phase) / Model 420 (Dual-Phase) |
| Dynamic Reserve | 60 dB |
| Frequency Range | 10 Hz – 100 kHz |
| Input Sensitivity | 3 µV – 1 V (full-scale output) |
| Input Impedance | 10¹² Ω ║ 1 nF (DC-coupled) |
| Output Time Constant | 100 µs – 30 s |
| Gain Accuracy | ±1% |
| Gain Stability | 200 ppm/°C |
| Max Output Voltage | ±16 V (pre-clamp) |
| Phase Adjustment | 90° coarse steps + 0–100° fine adjustment |
| Reference Input | TTL or sine wave, 100 mV rms min (sine), 5 V min (pulse) |
| Power | 115/230 V AC, 50–60 Hz, ≤10 VA |
| Brand | Signal Recovery |
|---|---|
| Origin | USA |
| Model | 7230A |
| Frequency Range | 1 mHz to 250 kHz |
| Dynamic Reserve | 100 dB (at 1 nV/√Hz) |
| Input Configuration | Single-ended / Differential, AC/DC Coupled |
| Communication Interfaces | Ethernet, USB, RS-232 (optically isolated) |
| Control Mode | Remote-only (no front-panel display) |
| Harmonic Detection | Dual-reference, dual-harmonic simultaneous measurement |
| Software Support | Acquire, LabVIEW, SRInstComms |
| Power Options | External DC supply or internal rechargeable battery |
| Form Factor | Compact, fanless design |
| Brand | SMC (Spain) |
|---|---|
| Origin | Spain |
| Model | PTE-300-V |
| Output Channels | 3 independent, voltage/current configurable |
| Voltage Output | 3 × 0–300 V AC |
| Current Output | 3 × 0–8 A AC |
| Phase Angle Range | 0.0–359.9° (per channel) |
| Frequency Range | 40–420 Hz |
| Output Power | 3 × 100 VA |
| THD | <0.5% (typical at full load) |
| Dimensions | 200 × 442 × 327 mm |
| Weight | 22 kg |
| Isolation | Fully galvanically isolated outputs |
| Reference Inputs | External frequency & phase sync inputs |
| Control Interface | RS-232/USB for Windows-compatible test automation software |
| Calibration | Digital closed-loop, firmware-based, no hardware adjustment required |
| Brand | SRS/Stanford Research Systems |
|---|---|
| Origin | USA |
| Model | SR850 |
| Frequency Range | 1 mHz to 102.4 kHz |
| Phase Resolution | 0.001° |
| Architecture | Dual-channel DSP-based |
| Display | Integrated graphical LCR-style interface |
| Optional Accessories | SR540 Optical Chopper, SR550/SR552/SR554 Low-noise Preamplifiers |
| Brand | SRS/Stanford Research Systems |
|---|---|
| Origin | USA |
| Model | SR865 |
| Frequency Range | DC to 2 MHz |
| Dynamic Reserve | 120 dB |
| Reference Modes | Single and Dual Reference |
| Internal Oscillator Range | 1 mHz to 2 MHz |
| Timebase I/O | 10 MHz TTL-compatible Input/Output |
| Display | 7″ capacitive touchscreen (800 × 480) with dual-channel time-domain and FFT visualization |
| Memory | 8 million points (internal waveform buffer) |
| Data Export | ASCII via USB mass storage |
| Interfaces | GPIB (IEEE-488.2), RS-232, USB 2.0 (CDC & MSC), 10/100 Ethernet, HDMI video output |
| Scan Capabilities | Sweep of reference frequency, amplitude, and DC offset |
| Compliance | CE, RoHS, FCC Class A |