- All
- Favorite
- Popular
- Most rated
| Brand | Shinsco |
|---|---|
| Model | SSC-FPCR500C |
| Origin | Shandong, China |
| Manufacturer Type | OEM Manufacturer |
| Country of Origin | China |
| Hold-up Volume | 18 mL (two reaction layers in series + one thermal control layer) / 23 mL (two reaction layers in series + one thermal control layer) |
| Max Operating Pressure | <20 bar |
| Temperature Control Range | −20 °C to 180 °C |
| Thermal Exchange Medium | Water, ethanol, silicone oil (external chiller required) |
| Reactor Material | High-borosilicate glass (transmission >320 nm) |
| Flow Rate Range | 0.1–100 mL/min |
| LED Light Source Options | 365 nm (quartz lens assembly), 395 nm, 405 nm, 420 nm, 455 nm, 470 nm, 500 nm, 520 nm, 590 nm, 620 nm, 660 nm, 740 nm, 810 nm, 850 nm, 940 nm, or broadband white LED (400–800 nm) |
| Cooling Method | Air-cooled or water-cooled (integrated |
| Brand | Shinsco |
|---|---|
| Origin | Shandong, China |
| Manufacturer | Yes |
| Type | Class II, Type B2 (Total Exhaust) |
| Model | BHC-1300II B2 |
| Airflow | 100% externally exhausted |
| Inflow Velocity | 0.53 ± 0.025 m/s |
| Downflow Velocity | 0.33 ± 0.025 m/s |
| Filtration | Dual HEPA (supply & exhaust), ≥99.999% @ 0.12–0.3 µm |
| Safety Certification | Compliant with EN 12469:2000, NSF/ANSI 49-2022 |
| Cleanliness Class | ISO 5 (Class 100) operational, achievable ISO 4 (Class 10) under controlled conditions |
| Noise Level | ≤67 dB(A) at 30 cm from sash, 38 cm above work surface |
| Lighting | ≥650 lx (T5-28W × 2) |
| UV Lamp | 30 W × 1 |
| Work Surface Load Capacity | 23 kg (no permanent deformation) |
| Power Supply | 220 ± 22 V, 50 Hz |
| Max Power Consumption | ≤1.8 kW |
| Drain Pan Volume | ≥4.0 L |
| Exhaust Port Diameter | Ø300 mm |
| Electrical Safety | Dielectric strength ≥1500 V (10 mA), insulation resistance ≥2 MΩ (500 V DC) |
| Structural Integrity | Leak-tight at 500 Pa (soap bubble test) |
| Vibration Amplitude | ≤5 µm (10 Hz–10 kHz) |
| Sash Height Alarm | Visual & audible alert beyond safe operating range |
| Auto Fan Compensation | Variable-frequency drive (VFD) for real-time airflow stabilization |
| UV Timer | 24-hour programmable scheduling |
| Pre-set Sash Angle | 10° ergonomic incline |
| Brand | Shinsco |
|---|---|
| Model | GC-7820 |
| Type | Dual-Valve, Dual-Column, Dual-FID Gas Chromatograph for LPG Hydrocarbon & Oxygenate Analysis |
| Origin | Shandong, China |
| Manufacturer | Shinsco Instrument Co., Ltd. |
| Compliance | GB/T 5274, GB 11174, GB/T 12576, GB 19159, SH/T 0233 |
| Column Configuration | Al₂O₃ PLOT (30 m × 0.53 mm, 15 µm) + Low-Ox (10 m × 0.53 mm, 10 µm) |
| Carrier Gas | Ultra-High-Purity Helium (≥99.999%) |
| Injection | Split Mode (10:1–50:1, recommended 50:1) |
| Oven Program | 90°C (1 min) → 6°C/min → 180°C (30 min) |
| Valve Oven Temp | 150°C |
| Injector Temp | 200°C |
| Dual FID Temp | 230°C |
| H₂ Flow | 30 mL/min |
| Air Flow | 350 mL/min |
| N₂ Make-up | 25 mL/min |
| Quantitation Loop | 0.5–1.0 mL (recommended 0.5 mL) |
| Detection Range | Methane (0.01–1%), Ethane (0.01–3%), Ethylene (0.01–3%), Propane (0.05–95%), Propylene (0.01–95%), i-Butane (0.05–80%), n-Butane (0.02–99%), trans-2-Butene (0.01–40%), Isobutylene (0.01–3%), 1-Pentene (0.01–0.5%), Dimethyl Ether (1.0–40%) |
| Brand | Shinsco |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Manufacturer |
| Model | GCS-60 |
| Detector Type | Flame Photometric Detector (FPD) |
| Measurement Range | 50 ppb – 0.1% (v/v) |
| Accuracy | ±5% for major components, ±10% for trace components |
| Output Signal | 4–20 mA |
| Communication | RS232 / RS485 (Modbus RTU) |
| Dimensions | 800 × 700 × 1900 mm |
| Weight | 170 kg |
| Power Requirement | 5 kW (increases with heated sample line length) |
| Operating Temperature | 5–45 °C |
| Operating Humidity | 5–95% RH |
| Compliance Standard | GB/T 28727–2012 |
| Brand | Shinsco |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | JJ-80SR-1 |
| Quotation | Upon Request |
| Filtration Efficiency | ≥99.9995% @ 0.3 µm |
| Nozzle Air Velocity | ≥20 m/s |
| Air Shower Duration | 1–99 s |
| Nozzle Diameter & Quantity | Ø30 mm, 12 nozzles |
| Air Shower Chamber Dimensions (W×D×H) | 800 × 900 × 1950 mm |
| Cabinet Material | Cold-Rolled Steel with Powder Coating |
| Interior Floor | Stainless Steel Clad |
| Power Supply | AC 380 V, 50 Hz |
| Max. Power Consumption | ≤1.2 kW |
| Net Weight | ~200 kg |
| Overall Dimensions (W×D×H) | 1400 × 1000 × 2100 mm |
| HEPA Filter Specification & Quantity | 610 × 610 × 120 mm, 2 units |
| Configuration | Single-person, dual-side airflow, interlocked doors (optional non-interlocked mode) |
Show next