BH Hysteresis Loop Analyzer
Filter
Showing all 8 results
| Brand | MAIERIC |
|---|---|
| Origin | Anhui, China |
| Model | MAIERIC |
| Measurement Principle | Combined DC-biased hysteresis loop tracing + high-frequency Barkhausen noise detection |
| Signal Acquisition | Dual-channel synchronized B–H and MBN waveform capture |
| Excitation Frequency Range | 0.1–100 Hz (programmable) |
| MBN Bandwidth | 20 kHz–1 MHz (programmable bandpass filter) |
| Data Output Format | .db (binary database with timestamped MBN, B, H waveforms) |
| Interface | Wi-Fi-enabled real-time PC control |
| Compliance | Designed for ASTM E1444/E2884-compliant magnetic testing workflows |
| Software Features | Real-time x–y scalable plotting of B(H), H(t), and MBN(t) |
| Brand | MAIERIC |
|---|---|
| Origin | Anhui, China |
| Model | BH Hysteresis Loop & Barkhausen Noise Analyzer |
| Measurement Principle | Dual-mode electromagnetic induction + Hall-effect field sensing + high-frequency MBN detection |
| Excitation Frequency Range | 1 Hz – 1 kHz (programmable) |
| Signal Acquisition | Simultaneous B (flux density), H (magnetic field strength), and MBN (Barkhausen noise) waveforms |
| Data Output Format | .db (binary database with timestamped raw channels) |
| Real-time Display | Adjustable XY scaling for B–H loop, H(t), MBN envelope, and time-domain MBN burst trains |
| Connectivity | Wi-Fi 802.11n (IEEE 802.11 compliant), USB 2.0 backup |
| Filtering | Programmable bandpass filter (10 kHz – 1 MHz, 3rd-order IIR) for MBN |
| Amplification | Programmable preamplifier gain (20 dB – 60 dB, 10 dB steps) |
| Compliance | Designed per IEC 60404-4 (magnetic materials — methods of measurement of DC magnetic properties) and ASTM A341/A341M (standard test method for direct-current magnetic properties of materials) |
| Brand | MAIERIC |
|---|---|
| Origin | Anhui, China |
| Model | BH-MBN-1000 |
| Measurement Principle | Dual-mode electromagnetic induction + Hall-effect field sensing + high-sensitivity MBN coil detection |
| Excitation Frequency Range | 1 Hz – 10 kHz (programmable) |
| MBN Bandpass Filter | 20 kHz – 2 MHz (adjustable center frequency & bandwidth) |
| Signal Acquisition | Simultaneous real-time sampling of B (flux density), H (magnetic field strength), and MBN voltage waveform |
| Data Output Format | SQLite (.db) with timestamped raw channels, calculated coercivity (Hc), remanence (Br), and MBN RMS/peak amplitude |
| Interface | Wi-Fi 802.11n (IEEE 802.11 compliant), USB 2.0 fallback |
| Software Platform | Windows 10/11 native application with GLP-compliant audit trail logging (user action timestamps, parameter change history, export metadata) |
| Brand | MAIERIC |
|---|---|
| Origin | Anhui, China |
| Model | CFT-1 |
| Coercivity Range | 1–50 A/cm |
| Measurement Depth | Up to 30 mm |
| Surface Clearance | Up to 6 mm |
| Measurement Speed | ~3.5 s per reading |
| Excitation Levels | 3 adjustable intensity settings |
| Data Storage | 32 GB internal (DB & CSV export) |
| Display | 2K full-touchscreen interface |
| Compliance | Designed for field-deployable non-destructive evaluation (NDE) of ferromagnetic components |
| Interface | USB, HDMI, sensor port |
| Brand | MAIERIC |
|---|---|
| Origin | Anhui, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | CFT-Series |
| Pricing | Upon Request |
| Excitation Levels | 3 Adjustable Steps |
| Lift-off Tolerance | Up to 6 mm |
| Measurement Speed | 3.5 s per reading |
| Penetration Depth | 30 mm |
| Coercivity Range | 1–50 A/cm |
| Display | 2K Full-Touch LCD |
| Storage Capacity | 32 GB (DB + CSV export) |
| Measurement Modes | Manual Keypad / Continuous Auto-Scan |
| Calibration | Intelligent Auto-Calibration Routine |
| Imaging | Built-in 1D/2D Mapping Visualization |
| Data Export | Standard DB & CSV formats |
| Compliance | Designed for ASTM E1444/E709-compliant magnetic particle inspection workflows and ISO 10893-1 non-destructive testing requirements |
| Brand | MAIERIC |
|---|---|
| Origin | Anhui, China |
| Model | MBN-2000 |
| Measurement Principle | Electromagnetic Induction + Hall Effect + High-Frequency Eddy Current Coupling |
| Signal Bandwidth | 10 kHz – 2 MHz (programmable bandpass) |
| MBN Preamp Gain | 20–80 dB (software-adjustable) |
| Excitation Frequency Range | 1 Hz – 1 kHz |
| Excitation Voltage Amplitude | 0–20 Vpp (programmable) |
| Data Storage Format | SQLite (.db) with timestamped raw MBN, B, and H waveforms |
| Real-time Display | Dual-axis XY plot (H vs. B, MBN envelope vs. H) with scalable axes |
| Connectivity | IEEE 802.11n Wi-Fi (2.4 GHz), USB 2.0 fallback |
| Compliance | Designed per IEC 60404-6 (magnetic measurement methods), compatible with ASTM A932/A932M (standard test method for Barkhausen noise evaluation of ferromagnetic materials) |
| Brand | MAIERIC |
|---|---|
| Model | MBN-BH Grinding Burn Detector |
| Measurement Principle | Magnetostrictive Barkhausen Noise (MBN) + Quasi-Static B-H Hysteresis Loop Analysis |
| Core Components | U-Core Excitation/Detection Probe with Integrated Hall Sensor & Miniature MBN Pickup Coil |
| Signal Acquisition | Simultaneous Real-Time MBN, B(t), and H(t) Waveforms |
| Data Output | .db Binary Format with Timestamped Raw Signals |
| Connectivity | Wi-Fi Enabled PC-Based Control Interface |
| Software Features | Programmable Excitation Frequency/Amplitude, Adjustable MBN Bandpass Filter, Configurable Pre-Amplifier Gain, Dual-Axis Scalable XY Plotting (B vs. H, MBN vs. Time, H vs. Time) |
| Compliance Context | Designed for GLP-aligned magnetic property evaluation per ASTM A342/A342M (Permeability), ISO 643 (Metallographic Hardness Correlation), and internal QC protocols for aerospace & automotive component manufacturing |
| Brand | MAIERIC |
|---|---|
| Origin | Anhui, China |
| Model | TEST |
| Measurement Principle | Electromagnetic Induction + Hall Effect + High-Frequency Eddy Current Coupling |
| Core Functions | Simultaneous MBN Signal Acquisition, Quasi-Static BH Loop Tracing, Coercivity & Remanence Calculation |
| Connectivity | Wi-Fi (IEEE 802.11 b/g/n), USB 2.0 |
| Signal Bandwidth | MBN Channel: 50 kHz – 1.2 MHz (programmable bandpass filter), B/H Channels: DC – 10 kHz |
| Data Output Format | SQLite .db (timestamped raw MBN, B, H waveforms + calculated hysteresis parameters) |
| Software Interface | Windows-based GUI with real-time XY scaling, parameter sweep capability, and export to CSV/MAT |