3i
Filter
Showing all 19 results
| Brand | 3i |
|---|---|
| Origin | USA |
| Model | AxL CTLS |
| Type | Automated Axial Scanning Light-Sheet Microscope |
| Illumination | Dual-Sided Patterned Light-Sheet (SLM-based) |
| Resolution | 1 µm × 1 µm × 3 µm (XYZ) |
| Field of View | Up to 25 mm × 25 mm × 25 mm |
| Light-Sheet Thickness | Adjustable from 3 µm to 20 µm |
| Compatibility | Refractive Index Range 1.33–1.56 |
| Data Throughput | TB–PB-scale with GPU-accelerated processing |
| Software | SlideBook 6/7 (FDA 21 CFR Part 11 compliant modules available) |
| Regulatory Compliance | GLP/GMP-ready architecture, audit trail support, ISO 13485-aligned design principles |
| Brand | 3i |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | HEMS & LT-AC/DC |
| Pricing | Upon Request |
| Brand | 3i |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | LT-AFM/MFM |
| Price | Upon Request |
| Operating Temperature Range | 20 mK – 300 K |
| Magnetic Field Capability | Up to 16 T |
| Displacement Noise Floor | 15 fm/√Hz (fiber interferometer, standard configuration) |
| Magnetic Resolution | 10 nm at 4 K |
| Interferometer Wavelength | 1310 nm |
| Fabry–Pérot Interferometer Noise Floor | 1 fm/√Hz (4–300 K) |
| Theoretical Shot-Noise Limit | 0.51 fm/√Hz |
| Scan Head Z-Range | 10 mm (stick-slip piezo stage) |
| XY Travel | Ø3 mm |
| Positioning Sensitivity | 50 nm |
| Scan Area Options (X×Y×Z @ Temp) | Ultra-Large: 200×200×7.2 µm @ 300 K, 50×50×4.8 µm @ 77 K, 30×30×2.4 µm @ 4.2 K |
| Large | 150×150×7 µm @ 300 K, 36×36×1.8 µm @ 77 K, 18×18×0.8 µm @ 4.2 K |
| Standard | 52×52×4.8 µm @ 300 K, 14×14×1.2 µm @ 77 K, 6×6×0.5 µm @ 4.2 K |
| Cantilever Alignment | Tri-point alignment chip (compatible with commercial cantilevers, no optical alignment required) |
| Scanner Architecture | Dual concentric piezotubes — inner tube for scanning, outer tube for coarse sample positioning |
| Scanner Electrodes | Quadrant electrodes + integrated excitation piezo for cantilever actuation |
| Signal Output | Analog BNC outputs (deflection, error, Z-feedback), LEMO interface to microscope control unit |
| Brand | 3i |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | LT-APO OBJECTIVES |
| Price | Upon Request |
| Clear Aperture (CA) | 4.7 mm |
| Focal Length (FL) | 2.8–2.9 mm |
| Numerical Aperture (NA) | 0.82 |
| Working Distance (WD) | 0.95 mm (up to 1.45 mm depending on configuration) |
| Transmission Coating | Broadband AR coating (>80% average transmission) |
| Spectral Range (Visible-NIR) | 400–1000 nm |
| Apochromatic Correction Range (Df < ±1 D) | 540–780 nm (visible), 650–970 nm (NIR), and 930–1365 nm (IR) |
| Environmental Rating | Designed for cryogenic temperatures, high magnetic fields (≥16 T), and ultra-high vacuum (UHV, ≤10⁻⁹ mbar) |
| Physical Dimensions | Ø24 mm × 49 mm L |
| Mass | 46 g |
| Mount Thread | RMS (0.80″ × 36 TPI, 3 mm engagement depth) |
| Brand | 3i |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | LT-SHPM/STM |
| Price | Upon Request |
| Max Applied Magnetic Field | ~16 T |
| Operating Temperature Range | 10 mK to 300 K |
| Hall Probe Resolution | ~1 µm |
| STM Resolution | Atomic-scale |
| Scan Ranges (XYZ @ Temp) | 200×200×7.2 µm @ 300 K |
| Brand | 3i |
|---|---|
| Origin | USA |
| Model | Marianas LightSheet |
| Imaging Principle | Dual-Orthogonal Selective Plane Illumination Microscopy (diSPIM) |
| Spatial Resolution | 330 nm isotropic (x/y/z) |
| Maximum Frame Rate | 600 fps |
| Environmental Control | Enclosed incubation chamber (15–40 °C, CO₂, humidity) |
| Software Platform | SlideBook 6.0 |
| Compatible Sample Formats | Standard glass-bottom dishes, coverslips, multi-well plates |
| Excitation Lasers (Standard) | 405 nm, 488 nm, 593 nm, 640 nm |
| Modular Expansion Options | Spinning-disk confocal, TIRF, FLIM, optogenetic stimulation units |
| Brand | 3i |
|---|---|
| Origin | Germany |
| Model | MK-CONFOCAL/RAMAN MICROSCOPE (MK-CFM/RAMAN) |
| Objective | 0.82 NA, 0.95 mm working distance, cryo-compatible APO objective |
| Temperature Range | 10 mK to 300 K |
| Magnetic Field Compatibility | Up to 31 T |
| Scan Range | 50 × 50 × 25 µm @ 300 K / 30 × 30 × 15 µm @ 4 K |
| Sample Approach Range | XYZ ±6 × ±6 × ±12 mm, step size 50–700 nm |
| Closed-Loop Positioning | Resistive encoder, 200 nm resolution |
| Fine Scan Range | 7.5 µm @ 300 K / 1 µm @ 4.2 K |
| Max Sample Dimensions | 10 × 10 × 5 mm |
| Sample Holder | 8-pin electrical interface |
| Brand | 3i |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | PIEZO ROTATOR |
| Price | Upon Request |
| Dimensions (L×W×H) | 35 mm × 35 mm × 11.5 mm |
| Weight | 65 g |
| Clear Aperture | 13 mm |
| Body Material | Titanium Alloy & Beryllium Copper (or Beryllium Copper Only for mK Operation) |
| Actuator | PZT Piezoceramic |
| Cabling | Insulated Twisted Pair — Copper for PZT, Phosphor Bronze for Resistive Sensor |
| Coarse Travel Range (Stepping Mode) | 360° Continuous |
| Max. Drive Speed (300 K) | ~32°/s |
| Input Voltage Range (PZT) | 0–60 V |
| Fine Angular Positioning Range (300 K) | 40 m° |
| Fine Angular Positioning Range (4 K) | 6 m° |
| Fine Positioning Resolution | µ° |
| DC Input Voltage Range (Sensor) | 0–100 V (300 K), 0–150 V (4 K) |
| Encoder Type | Cermet Resistive Sensor |
| Encoder Travel Range | 315° |
| Encoder Resolution | ~5 m° |
| Encoder Power Consumption (Active) | 10–100 µW |
| Repeatability (Unidirectional) | ±45 m° |
| Max. Static Load (RT) | 200 g |
| Max. Dynamic Torque about Axis | 2 N·cm |
| Environmental Compatibility | Ambient Temperature, Cryogenic (Down to 4 K), Ultra-High Vacuum (UHV), Bakeable to 100 °C |
| Brand | 3i |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | NMI-VSM |
| Price | Upon Request |
| Sensitivity (RMS) | 5×10⁻⁷ emu |
| Oscillation Frequency Range | 1–100 Hz (calibrated) |
| Oscillation Amplitude Range | 0.1–5 mm |
| Maximum Sample Diameter | 6 mm |
| Temperature Range | 2 K to 1000 K |
| Magnetic Field Range | Up to 2.5 T (electromagnet), up to 14 T (with cryostat) |
| Brand | 3i |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | NV-CENTRE CONFOCAL MICROSCOPY |
| Price | Upon Request |
| Objective NA | 0.82 |
| Working Distance | 0.95 mm @ 532 nm |
| Laser Source | SLM-stabilized 10 mW @ 532 nm |
| Scan Range | 30 × 30 × 15 µm at 4 K |
| Outer Diameter | 49 mm |
| Temperature Range | 10 mK – 300 K |
| Detector | Avalanche Photodiode (APD) |
| Sample Stage | XYZ Nanopositioning Platform, 6 × 6 × 12 mm travel |
| NV/QTF Sensor Stage | XYZ Nanopositioning Platform, 4 × 4 × 6 mm travel |
| Position Sensor Resolution | 200 nm |
| Controller | Ultra-low-noise FPGA-based AFM controller with high-speed USB interface |
| Real-time Processor | 32-bit, 128 MB DDR SDRAM |
| ADC | Dual-channel, 16-bit / 100 MHz |
| DAC | Dual-channel, 16-bit / 100 MHz |
| PID Loops | Seven digital PID controllers implemented on FPGA |
| Piezo Controller Channels | 19-channel |
| High-resolution ADC | 16-channel, 24-bit / 175 kHz |
| Scan Signal DAC | 24-bit XYZ output |
| High-voltage Amplifier | Low-noise design |
| Brand | 3i |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported Instrument |
| Model | PlantScope |
| Pricing | Available Upon Request |
| Brand | 3i |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | 1/16″ OD × 0.3 mm ID |
| Material Grades | ASTM A213/A269/A312-compliant TP304, TP321, TP316L, TP304L, Monel 400, Inconel 600 |
| Outer Diameter Tolerance | ±0.1 mm |
| Wall Thickness Tolerance | ±0.1 mm |
| Max Length per Coil | 1000 m |
| Surface Finish | Electropolished (optional) |
| Pressure Rating | Up to 900 psi (6.2 MPa) at 25°C |
| Temperature Range | –200°C to +450°C (dependent on grade and configuration) |
| Packaging | Anti-vibration, dust-proof, abrasion-resistant coil packaging |
| Brand | 3i |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | 6×1 mm (OD×Wall) |
| Instrument Type | Laboratory Gas Chromatograph Accessory |
| Application Scope | General-Purpose GC Fluidic Path |
| Material Grades | ASTM TP304, TP321, TP316L, TP304L, Monel 400, Inconel 600 |
| Standards Compliance | ASTM A269, A213, ASME SA-312 |
| Outer Diameter Range | 1–25 mm |
| Wall Thickness Range | 0.4–2.1 mm |
| Tolerance | ±0.05 mm (OD and WT) |
| Delivery Condition | Annealed & Soft |
| Surface Finish | Bright-Annealed |
| Maximum Coil Length | ≤1000 m per spool |
| Packaging | Vibration- and abrasion-resistant |
| Brand | 3i |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Vivo SDC |
| Pricing | Upon Request |
| Brand | 3i |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | WAD-001 |
| Price | USD 1 (FOB Shanghai, ex-factory reference only) |
| Dimensions | 184.2 × 68.7 × 44.5 mm |
| Resolution | 181,490 microsteps per full stroke |
| Flow Range | 5 nL/s to 5 mL/s |
| Dynamic Range | >3 decades (<0.1–100% of syringe volume) |
| Accuracy | ±0.25% of full stroke (25°C, deionized water, 1.25 mL ceramic syringe) |
| Precision | ≤0.5% CV at full stroke (25°C, deionized water, 1.25 mL ceramic syringe) |
| Syringe Options | Ceramic (250 µL, 1.25 mL, 5 mL) |
| Valve Configurations | Non-distribution (3/4-port, dual-loop) |
| Communication | RS232 / RS485 / CAN |
| Compliance | ISO 13485 certified components (Tecan Cavro OEM modules), RoHS 2011/65/EU compliant |
| Drive Mechanism | Stepper motor with integrated loss-of-step detection, force monitoring, and onboard diagnostics |
| Brand | 3i |
|---|---|
| Origin | Germany |
| Model | LOW TEMPERATURE XYZ PIEZO SCANNER |
| Scanning Range | 50 × 50 × 24 µm @ 300 K, 30 × 30 × 15 µm @ <4 K |
| Operating Temperature Range | 10 mK – 300 K |
| Maximum Magnetic Field Tolerance | 40 T |
| Actuator Material | Piezoceramic stack integrated with titanium and alumina ceramic housing |
| Structural Components | Stainless steel screws, oxygen-free copper wiring, FR4 PCB substrate |
| Feedback Option | Closed-loop operation available per axis with heterodyne fiber interferometry (1–10 µW optical power per axis) |
| Mass | 16 g |
| Dimensions | 24 × 24 × 9.2 mm |
| Brand | 3i |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | LT-sSNOM |
| Price | Upon Request |
| Wavelength Range | 532 nm – 20 µm (with metallic reflective optics) |
| AFM Scanner | Fiber-interferometer-equipped piezoelectric stage, scan range 30 × 30 × 15 µm (@ 4 K) |
| XYZ Sample Nanopositioner | 6 × 6 × 12 mm travel |
| Off-Axis Parabolic Mirror Nanopositioner | 4 × 4 × 6 mm travel |
| Position Sensor Resolution | 200 nm (resistive) |
| Outer Diameter | 49 mm |
| Temperature Range | 10 mK – 300 K |
| Maximum Magnetic Field | 31 T |
| Electrical Contacts | 8-point feedthrough on sample stage |
| Supported AFM Modes | Contact, Dynamic, Non-Contact (ncAFM), Magnetic Force Microscopy (MFM), Conductive AFM (cAFM), Kelvin Probe Force Microscopy (KPFM), Photoinduced Force Microscopy (PRFM), Electrostatic Force Microscopy (EFM) |
| Brand | 3i |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | NMI CRYOSTAT: CRYOGENFREE ULTRA LOW-VIBRATION CRYOS |
| Maximum Magnetic Field | 14.0 T |
| Temperature Range | 1.3 K to 300 K |
| Sample Diameter | Up to 49 mm |
| VTI Configuration | Top-Loading Variable-Temperature Insert |
| DSV Homogeneity | ≤0.1% over 1 cm |
| Brand | 3i |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | 2 AXIS PIEZO ROTATOR |
| Pricing | Upon Request |
| Rotation Range (per axis) | ±90° |
| Angular Resolution | 1 µdeg (0.000001°) |
| Operating Temperature Range | 10 mK – 300 K |
| Maximum Magnetic Field Compatibility | 15 T |
| Compatible Carrier | Standard 20-pin Leadless Chip Carrier (LCC) |
| Drive Mechanism | Piezoelectric Motor |
| Controller Interface | USB 2.0 |