Acculogic
Filter
Showing all 9 results
| Brand | Acculogic |
|---|---|
| Origin | Canada |
| Model | FLS980 |
| Configuration | Dual-Sided, Closed-Loop, Up to 22 Probes |
| Minimum Step Resolution | 1 µm |
| Positioning Repeatability | ±10 µm |
| Programmable Probe Tilt | ±6° |
| Max PCB Size | 813 × 965 mm (32″ × 38″) |
| Max Component Height | 85 mm |
| Max Probe Tip Radius | 50–500 µm |
| Analog Measurement Speed | Up to 1000 measurements/sec |
| 4-Wire Capability | Full per probe |
| Test Channel Count | Up to 128 non-multiplexed channels |
| Warpage Compensation | LaserScan + High-Resolution Vision |
| Compliance | Supports GLP/GMP audit trails, ASTM F2622 (for electronic assembly test systems), ISO/IEC 17025 traceability frameworks |
| Brand | Acculogic |
|---|---|
| Origin | Canada |
| Model | Acculogic FLS980 |
| Type | Flying Probe Tester for PCBs |
| Positioning Repeatability | ±10 µm |
| Minimum Step Resolution | 1 µm |
| Programmable Probe Angle | ±6° |
| Max. Configurable Probes | 22 (dual-side) |
| Max. PCB Size | 813 × 965 mm (32″ × 38″) |
| Max. Component Height | 85 mm |
| Max. Probe Tip Radius Range | 50–500 µm |
| Measurement Speed | Up to 1000 measurements/sec |
| Electrical Test Capability | Analog, Digital, Mixed-Signal, Boundary Scan (JTAG), Powered Functional Test up to GHz range |
| Compliance | Supports GLP/GMP audit trails, ASTM F2413-18 (PCB test methodology reference), ISO/IEC 17025 traceability framework (via software logging) |
| Brand | Acculogic |
|---|---|
| Origin | Canada |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Imported |
| Model | ACCULOGIC FLS980 Series |
| Pricing | Upon Request |
| Brand | Acculogic |
|---|---|
| Origin | Canada |
| Model | FLS980 Series |
| Configuration | Dual-Sided, Closed-Loop System |
| Maximum Probe Modules | 22 (top + bottom) |
| Minimum Step Resolution | 1 µm |
| Positioning Repeatability | ±10 µm |
| Programmable Probe Angle | ±6° |
| Max PCB Size | 813 × 965 mm (32″ × 38″) |
| Max Component Height | 85 mm |
| Max Probe Tip Height | 45 mm |
| Tip Radius Range | 50–500 µm |
| Tip Profiles | Needle, Cup, Dome |
| Measurement Speed | Up to 1000 measurements/sec |
| Analog Test Capability | 4-wire per probe |
| Supported Test Modes | 2-wire, 4-wire, Quasi-4-wire, Powered Functional Test, Boundary Scan (JTAG), NetScan™ |
| Laser-Based Board Warpage Compensation | Yes |
| Vision System | High-Resolution Reference Camera with Advanced Image Processing |
| Motion Architecture | Frictionless Air-Gap Linear Shuttles |
| Compliance Framework | Supports GLP/GMP audit trails, ISO/IEC 17025 traceability workflows, and FDA 21 CFR Part 11–ready software logging (via Integrator™) |
| Brand | Acculogic |
|---|---|
| Origin | Canada |
| Model | FLS980 Series III |
| Positioning Repeatability | ±10 µm |
| Minimum Step Resolution | 1 µm |
| Maximum PCB Size | 813 × 965 mm (32" × 38") |
| Programmable Probe Angle | ±6° |
| Max. Probe Count (Top + Bottom) | 22 |
| Measurement Speed | Up to 1000 measurements/sec |
| Electrical Test Capabilities | Analog, Digital, Mixed-Signal, Boundary Scan (JTAG), Powered Functional Test (up to GHz range) |
| Warpage Compensation | LaserScan-enabled Z-axis mapping |
| Vision System | High-resolution fiducial camera with advanced image processing |
| Compliance Support | ASTM F2413-18 (for test system validation), ISO/IEC 17025 traceability framework, GLP/GMP-aligned audit trail in Integrator™ software |
| Brand | Acculogic |
|---|---|
| Origin | Canada |
| Model | FLS980 Series III |
| Positioning Repeatability | ±10 µm |
| Minimum Step Resolution | 1 µm |
| Max. Configurable Probes | 22 (dual-sided) |
| Programmable Probe Tilt Angle | ±6° |
| Max. PCB Size | 813 × 965 mm (32″ × 38″) |
| Max. Component Height | 85 mm |
| Max. Probe Tip Radius Range | 50–500 µm |
| Analog Measurement Speed | up to 1000 measurements/sec |
| Test Channel Count (non-multiplexed) | up to 128 |
| Laser-Based Board Warpage Compensation | Yes |
| Vision System | High-resolution fiducial camera with advanced image processing |
| Compliance | Designed for GLP/GMP-aligned test environments |
| Brand | Acculogic |
|---|---|
| Origin | Canada |
| Model | FLS980Dxi |
| Motion Control | Closed-loop linear motor shuttles |
| Minimum Step Resolution | 1 µm |
| Positioning Repeatability | ±10 µm |
| Maximum Probes | 22 (top + bottom) |
| Programmable Probe Tilt | ±6° |
| PCB Max Size | 813 × 965 mm (32″ × 38″) |
| Max Component Height | 85 mm |
| Max Probe Height | 45 mm |
| Tip Radius Range | 50–500 µm |
| Tip Geometry Options | Needle, Cup, Dome |
| Analog Measurement Speed | Up to 1000 measurements/sec |
| Measurement Modes | 2-wire, 4-wire, quasi-4-wire |
| Stimulus/Measurement Resources | Dual independent channels |
| Supported Test Types | Analog, Digital, Mixed-Signal, Boundary Scan (JTAG), NetScan™ |
| Warpage Compensation | Integrated LaserScan™ and high-res fiducial camera |
| Software Platform | Integrator™ with motion control & measurement algorithms |
| Compliance Framework | Supports GLP/GMP audit trails, ASTM F2627 (for PCB test system validation), ISO/IEC 17025 traceability workflows |
| Brand | Acculogic |
|---|---|
| Origin | Canada |
| Model | SCORPION FiS 640 |
| Maximum Test Points | 1024 |
| Board Size Capacity | 350 mm × 400 mm |
| Fixture Change Time | < 60 s |
| Operating System | Windows-based |
| Embedded Network Analyzer | Yes |
| Software Compatibility | Compatible with Acculogic Flying Probe Test (FPT) platforms |
| Footprint | 1050 mm × 1050 mm |
| Fixture Reusability | Supports legacy SCORPION iCT7000 fixtures |
| Programmable Power Supply Integration | Up to 4 external iTH 7000-grade units (optional) |
| Brand | Acculogic |
|---|---|
| Origin | Canada |
| Model | SCORPION iCT7000 |
| Maximum Test Points | 8192 |
| Board Size Capacity | 350 mm × 400 mm |
| Fixture Change Time | < 60 s |
| Operating System | Windows-based |
| Embedded Network Analyzer | Yes |
| Software Compatibility | Flying Probe Tester (FPT) software formats |
| Power Integration | Up to 4 external high-performance programmable power supplies |
| Compliance | Designed for IPC-A-610, IPC-J-STD-001, and ISO 9001-aligned manufacturing environments |
| Interface Protocol | SMEMA-compatible (via optional iTH7000 handler integration) |