A&D (AND)
Filter
Showing the single result
| Brand | A&D (AND) |
|---|---|
| Origin | Japan |
| Model | 913BA1 / 914BA1 / 916BA1 |
| Operating Pressure Range | Up to 1.5 MPa |
| Input Signal | 0–10 V DC, 4–20 mA (configurable) |
| Pilot Pressure | 0.3 MPa |
| Supply Voltage | 24 V DC |
| Port Size | 1/4", 3/8", 1/2" |
| Fluid Compatibility | Liquids and gases non-corrosive to PTFE, Viton®, and brass |
| Input Impedance | ≥1 kΩ (voltage), ≤300 Ω (current) |
| Control Principle | Force-Balance + PI Algorithm |
| Hysteresis | ≤±0.2% FS |
| Linearity | ≤±1% FS |
| Response Time | <0.5 s (no-load) |
| Flow Consumption | ≤1.5 L/min (standard), ≤5 L/min (high-speed) |
| Weight | 2.2 kg / 3.4 kg / 6.8 kg |
| Valve Body Material | Brass |
| Diaphragm | PTFE |
| Seal Material | Viton® |
| Insulation Resistance | >1 MΩ |
| Mounting Orientation | Omnidirectional (zero-point drift ≤±1% FS dependent on orientation) |
| Orifice Diameter | 6 mm / 10 mm / 14 mm |