AlphaLas
Filter
Showing 1–30 of 41 results
| Brand | ALPHALAS |
|---|---|
| Origin | Germany |
| Type | Actively Q-Switched DPSS Laser |
| Wavelength Options | 1047, 1053, 1062, 1064, 946, 1342 nm (with harmonic generation to 671, 532, 473, 355, 266 nm) |
| Pulse Width | 0.7–3.0 ns |
| Repetition Rate | 0.1 kHz – 100 kHz |
| Average Power | 100 mW – >1 W |
| Pulse Energy | up to 100 µJ @ 1 kHz |
| Beam Mode | TEM₀₀ |
| Compliance | CE, RoHS, ISO 9001-manufactured |
| Brand | AlphaLas |
|---|---|
| Origin | Germany |
| Model | Actively Q-Switched DPSS Lasers |
| Wavelength Options | 1047 nm, 1053 nm, 1062 nm, 1064 nm, 946 nm, 1342 nm (with harmonic generation to 671 nm, 532 nm, 473 nm, 355 nm, 266 nm) |
| Pulse Width | 0.7–3.0 ns |
| Pulse Energy | 20–100 µJ @ 1–25 kHz |
| Average Output Power | 300–1000 mW |
| Repetition Rate | 0–25 kHz |
| Beam Mode | TEM₀₀ |
| Operating Mode | Actively Q-switched solid-state (Nd:YAG, Nd:YVO₄, or similar gain media) |
| Brand | AlphaLas |
|---|---|
| Origin | Germany |
| Model | BBA |
| Type | Inverting/Non-Inverting Broadband RF Amplifier for Ultrafast Optical Detection |
| Key Specifications | Bandwidth up to 4 GHz |
| Compliance | CE, RoHS, IEC 61326-1 (EMC for Laboratory Equipment) |
| Brand | AlphaLas |
|---|---|
| Origin | Germany |
| Model | CCD-S3600-D(-UV) |
| Effective Pixels | 3648 |
| Pixel Size | 7 µm × 200 µm (standard) |
| ADC Resolution | 16-bit |
| Onboard Memory | 32 MB DDR2 |
| Interface | USB 2.0 (bus-powered) |
| Max Frame Rate | 269.5 fps (at full resolution, no frame loss) |
| Trigger I/O | TTL-compatible input & output |
| Spectral Range | 200–1100 nm (standard) |
| Operating Systems | Windows 7/Vista/XP (WHQL-certified), Linux, macOS |
| SDK Support | C/C++, LabVIEW, Python (via wrapper), MATLAB |
| Brand | ALPHALAS |
|---|---|
| Origin | Germany |
| Model | Dual-Wavelength Zero-Order Retardation Plate |
| Designation | Dual Wave® |
| Application | Femtosecond Tripling Polarization Matching |
| Compliance | ISO 10110 Optical Component Standards, RoHS 2015/863/EU |
| Coating | Broadband AR (350–2000 nm), R < 0.25% per surface |
| Substrate | Fused Silica (Suprasil® or equivalent) |
| Surface Quality | 10-5 scratch-dig |
| Wavefront Distortion | λ/10 @ 633 nm |
| Clear Aperture | ≥90% of diameter |
| Damage Threshold | >5 J/cm² (1064 nm, 10 ns, 10 Hz) |
| Brand | AlphaLas |
|---|---|
| Origin | Germany |
| Model | LASKIT-500 |
| Laser Type | Diode-pumped Nd:YAG/Nd:YVO₄ solid-state laser system |
| Output Wavelengths | 1064 nm (fundamental), 532 nm (intracavity/intra-cavity SHG), 266 nm (FHG, optional), 355 nm (THG, optional) |
| Operating Modes | CW @ 1064 nm |
| Q-switched @ 1064 nm (passive, Cr⁴⁺ | YAG) |
| Pulse Width Range | 10–100 ns (depending on gain medium & configuration) |
| Repetition Rate | 5–100 kHz |
| Average Power (1064 nm, CW) | 300–500 mW |
| Average Power (532 nm, CW) | 10–40 mW |
| Average Power (532 nm, Q-switched) | 5–30 mW |
| Integrated Components | Peltier-cooled pump diode with driver & TEC controller (LDD1-1T or LPS1-2T), Nd:YAG/Nd:YVO₄ crystal mount with water cooling, fixed plano-concave cavity mirrors, Cr⁴⁺:YAG saturable absorber (AR/AR coated), AR-coated KTP frequency-doubling crystal (intra- and extracavity configurations), optical breadboard, IR-VIS alignment converter (15 mm clear aperture), ultrafast photodetector UPD-300-SP (320–1100 nm, <300 ps rise time), CCD linear array CCD-2000M (2048 px, for M², autocorrelation, spectral analysis) |
| Modularity | Tool-free crystal/mirror exchange |
| Optional Upgrades | EOD active Q-switching (electro-optic deflector), PC active Q-switching (Pockels cell), monolithic microchip Cr⁴⁺:Nd:YAG laser (1064 nm, ~800 ps, ~10 kW peak power), external SHG/THG/FHG modules |
| Brand | Alphalas |
|---|---|
| Origin | Germany |
| Product Type | Imported Diode-Pumped Solid-State (DPSS) Laser System |
| Model | Modelocked_Picosecond_DPSS_Lasers |
| Wavelength Range | Fundamental IR Output (Typ. 1064 nm), Optional Harmonic Generation (532 nm, 355 nm, 266 nm) |
| Pulse Duration | <15 ps (FWHM) |
| Repetition Rate | 10–100 MHz (Standard), Configurable |
| Average Power | Up to 1.5 W @ 1064 nm |
| Peak Power | >100 kW |
| Beam Quality | M² < 1.2 |
| Noise | RMS < 0.3% (10 Hz–10 MHz) |
| Operation Mode | CW-mode-locked, Turnkey Operation |
| Cooling | Air-cooled |
| Compliance | CE, RoHS, IEC 60825-1:2014 Class 4 Laser Product |
| Brand | AlphaLas |
|---|---|
| Origin | Germany |
| Model | MONOPOWER |
| Type | Diode-Pumped CW Solid-State Laser |
| Wavelengths | 473 nm (blue), 532 nm (green), 671 nm (red), 1047/1053/1062/1064 nm (IR) |
| Output Power Range | 10 mW – 10 W |
| Beam Mode | TEM₀₀ (single transverse mode), single longitudinal mode (SLM) or multi-longitudinal mode (MLM) options |
| Amplitude Noise | <0.3% RMS (10 Hz–1 GHz) for SLM variants, <0.5% RMS for MLM variants |
| M² | ≤1.2 |
| Polarization Ratio | >200:1 |
| Beam Pointing Stability | <5 µrad/°C (SLM), <8 µrad/°C (MLM) |
| Coherence Length | ~300 m (SLM, 532 nm) |
| Beam Waist (1/e²) | 0.34 mm (SLM), 0.8 mm (MLM) |
| Divergence | <2.2 mrad (SLM), <3 mrad (MLM) |
| Warm-up Time | 3–8 min |
| Power Consumption | <35 W (SLM), <600 W (MLM) |
| Laser Head Dimensions | 250×105×80 mm³ (SLM), 350×105×80 mm³ (MLM) |
| Cooling Base | 120×65×60 mm³ |
| Pump Source | LDF-30 diode module (for 5W variant) |
| Brand | AlphaLas |
|---|---|
| Origin | Germany |
| Model | MONOPOWER™ |
| Light Source Type | Continuous-Wave (CW) Diode-Pumped Solid-State (DPSS) Laser |
| Wavelength | 532 nm (fundamental green) |
| Output Power Range | 10 mW to 10 W |
| Beam Quality | TEM₀₀ (Single Transverse Mode) |
| Relative Intensity Noise (RIN) | < −130 dB/Hz (typ. < 0.5% RMS, 10 Hz–10 MHz) |
| Linewidth | < 1 MHz (single longitudinal mode) |
| Polarization Extinction Ratio | > 100:1 |
| Cooling | Air-cooled (up to 2 W), Water-cooled (≥ 5 W) |
| Operating Temperature | 15–30 °C |
| Warm-up Time | < 15 min to full stability |
| Power Stability (8 hrs) | ±0.5% |
| Beam Diameter (1/e²) | 0.6–1.2 mm (model-dependent) |
| Divergence (full angle) | < 1.5 mrad |
| Modulation Capability | Analog & TTL modulation input (optional) |
| Compliance | CE, RoHS, IEC 60825-1:2014 Class 3B/4 laser safety |
| Brand | AlphaLas |
|---|---|
| Origin | Germany |
| Model | MP-532-5W-MM |
| Output Wavelength | 532 nm |
| Output Power | 5 W (CW) |
| Laser Type | Diode-Pumped Solid-State (DPSS), Multi-Longitudinal-Mode |
| Cooling | Water-cooled |
| Beam Diameter (1/e²) | ~1.2 mm |
| Beam Divergence (full angle) | <1.5 mrad |
| Polarization Ratio | >100:1 |
| Power Stability (rms, over 8 h) | <1.5% |
| M² Factor | <1.3 |
| Warm-up Time | <10 min |
| Operating Temperature | 15–30 °C |
| Humidity | <80% RH (non-condensing) |
| Input Power | 220 V AC, 50/60 Hz |
| Dimensions (L×W×H) | 360 × 140 × 120 mm |
| Weight | ~6.5 kg |
| Brand | ALPHALAS |
|---|---|
| Origin | Germany |
| Model | 1064-200 |
| Wavelength | 1064 nm (customizable to 946 nm, 1342 nm, and frequency-doubled outputs) |
| Pulse Width | < 1 ns |
| Operating Mode | Passive Q-switching |
| Laser Type | Diode-pumped microchip solid-state laser |
| Illumination Configuration | External illumination |
| Compliance | CE-marked, RoHS-compliant |
| Cooling | Conductive (fanless, thermoelectrically stabilized) |
| Beam Quality | TEM₀₀ (M² < 1.1) |
| Repetition Rate | 1–100 kHz (model-dependent, standard 10–50 kHz) |
| Pulse Energy | Up to 50 µJ (at 1064 nm, 10 kHz) |
| Average Power | Up to 500 mW |
| Polarization | Linear, >100:1 extinction ratio |
| Brand | AlphaLas |
|---|---|
| Origin | Germany |
| Model | PICOPOWER 10 IR / PICOPOWER 5 G |
| Wavelength | 1064 nm (IR) / 532 nm (Green) |
| Pulse Width | <10 ps |
| Repetition Rate | 100 MHz |
| Average Output Power | ≥10 W @ 1064 nm, ≥5 W @ 532 nm |
| Beam Quality | TEM₀₀ |
| Beam Diameter (1/e²) | 1 mm at output |
| Beam Divergence | 1 mrad |
| Power Stability (24 h, peak-to-peak) | <1% |
| Polarization Ratio | >300:1, linear |
| Intensity Noise (30 Hz–2 MHz) | <0.5% RMS |
| Pump Diode Lifetime | >10,000 h |
| Operating Voltage | 85–240 V AC, single-phase |
| Max. Power Consumption | <800 W |
| Laser Head Dimensions | 150 × 150 × 800 mm³ |
| PSU & Cooling Unit Dimensions | 450 × 300 × 600 mm³ |
| Operating Temperature | 10–35 °C |
| Brand | AlphaLas |
|---|---|
| Origin | Germany |
| Model | PICOPOWER |
| Wavelength | 1064 nm (IR) or 532 nm (Green) |
| Pulse Width | < 10 ps (customizable) |
| Repetition Rate | 100 MHz (customizable) |
| Beam Quality | TEM₀₀ |
| Beam Diameter (1/e²) | 1 mm at output |
| Beam Divergence | 1 mrad |
| Pointing Stability | 40 µrad |
| Output Power | ≥10 W @ 1064 nm (PICOPOWER 10 IR), ≥5 W @ 532 nm (PICOPOWER 5G) |
| Power Stability | <1% peak-to-peak (24 h) |
| Polarization Ratio | >300:1 linear |
| Optical Noise (30 Hz–2 MHz) | <0.5% |
| Pump Diode Lifetime | >10,000 h |
| Electrical Input | 85–240 V AC, single-phase |
| Max. Power Consumption | <800 W |
| Laser Head Dimensions | 150 × 150 × 800 mm³ |
| PSU & Cooling Unit Dimensions | 450 × 300 × 600 mm³ |
| Operating Temperature | 10–35 °C |
| Brand | ALPHALAS |
|---|---|
| Origin | Germany |
| Type | Picosecond Pulsed Semiconductor Laser Source |
| Wavelength Range | 375–2300 nm |
| Pulse Width | Down to 12 ps (FWHM, convolved) |
| Peak Power | Up to 3 W |
| Repetition Rate | Single-shot to 100 MHz |
| Output Options | Free-space collimated or fiber-coupled (SM/PM) |
| Linewidth Options | Fabry–Pérot (FP) or DFB narrow-linewidth variants |
| Compliance | CE, RoHS, IEC 61000-6-3/6-4 |
| Brand | AlphaLas |
|---|---|
| Origin | Germany |
| Model | PICOPOWER-LD |
| Type | Diode-Pumped Solid-State (DPSS) Picosecond Laser Source |
| Wavelength Options | 375, 405, 450, 488, 520, 635, 670, 785, 976, 1030, 1064, 1300, 1550 nm (custom wavelengths available) |
| Pulse Width | <40 ps (typ. <50 ps across most wavelengths) |
| Repetition Rate | 0.1 Hz – 20 MHz (optional up to 80 MHz) |
| Peak Power | Up to 3 W (wavelength- and configuration-dependent) |
| Average Power | 0.2–1.0 mW @ 20 MHz (up to 2.0 mW @ 40 MHz, depending on wavelength) |
| Beam Quality | TEM₀₀ (slightly elliptical) |
| Beam Divergence | 0.5–1.5 mrad |
| Output | Collimated free-space (with integrated spatial filter) or optional fiber-coupled (SMF or PMF) |
| Triggering | External TTL input & synchronized TTL output |
| Control Interface | Built-in digital frequency generator with front-panel display |
| Compliance | CE-marked |
| Brand | Alphalas |
|---|---|
| Origin | Germany |
| Model | PICOPOWER-LD |
| Wavelength Options | 375, 405, 450, 488, 635, 670, 785, 976, 1030, 1064, 1300, 1550 nm (custom wavelengths available) |
| Pulse Width | <40–80 ps (wavelength-dependent) |
| Repetition Rate | 0.1 Hz to 20 MHz (optional up to 80 MHz) |
| Peak Power | Up to 3 W (wavelength- and configuration-dependent) |
| Average Power | 0.2–1.0 mW @ 20–40 MHz |
| Beam Divergence | 0.5–1.5 mrad |
| Output | Free-space collimated (TEM₀₀, elliptical) or fiber-coupled (SMF/PMF options) |
| Operating Temperature | 15–35 °C |
| Laser Head Dimensions | Ø25 × 125 mm |
| Driver Dimensions (PLDD-100-40) | 235 × 110 × 280 mm |
| Weight | Laser Head 120 g, Driver 2.6 kg |
| Compliance | CE, RoHS, IEC 60825-1:2014 (Laser Class 1M or 3B per wavelength) |
| Brand | AlphaLas |
|---|---|
| Origin | Germany |
| Model | PICOPOWER-LD-810-FSB |
| Wavelength | 810 nm |
| Repetition Rate | 100 MHz |
| Pulse Width | <35 ps (typ.) |
| Output Type | Free-space collimated beam |
| Driver Integration | Fully integrated, TTL/CMOS-compatible trigger input |
| Compliance | CE, RoHS |
| Component Category | Optical Component |
| Brand | AlphaLas |
|---|---|
| Origin | Germany |
| Model | PICOPOWER-RG1-1064-10K |
| Wavelength | 1064 nm (fundamental), optional harmonics at 532 nm, 355 nm, and 266 nm |
| Pulse Width | < 30 ps (FWHM) |
| Repetition Rate | Single-shot to 10 kHz |
| Pulse Energy @ 1064 nm | 50 µJ @ 10 kHz (up to 100 µJ @ lower rep rates) |
| Peak Power @ 1064 nm | > 2 MW |
| RMS Timing Jitter (external trigger) | 3.5 ps |
| Beam Quality | TEM₀₀, M² < 1.2 |
| Beam Pointing Stability | < 30 µrad (8 h) |
| Power Stability (8 h) | < 1.0% rms @ 1064 nm |
| Cooling | Air-cooled |
| Compliance | CE, RoHS |
| Brand | AlphaLas |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported Optical Instrument |
| Model | PICOPOWER-RG1-1064-10K |
| Laser Type | Diode-Pumped Solid-State (DPSS) Q-Switched Laser |
| Wavelength | 1064 nm |
| Repetition Rate | 10 kHz |
| Pulse Duration | <15 ps |
| Output Configuration | TEM₀₀ |
| Cooling | Air-Cooled |
| Compliance | CE, RoHS, IEC 60825-1:2014 Class 4 Laser Product |
| Brand | ALPHALAS |
|---|---|
| Origin | Germany |
| Model | PICOPOWER™-LD |
| Wavelength Options | 375, 405, 450, 488, 635, 670, 785, 976, 1030, 1064, 1300, 1550 nm (custom wavelengths available) |
| Pulse Width | <40–80 ps (model-dependent) |
| Repetition Rate | 0.1 Hz to 20 MHz (optional up to 80 MHz) |
| Peak Power | up to 3 W (wavelength- and configuration-dependent) |
| Average Power | 0.2–1.0 mW @ 20–40 MHz |
| Beam Divergence | 0.5–1.5 mrad |
| Output | Free-space collimated or fiber-coupled (SM/PM fiber options) |
| Laser Head Dimensions | Ø25 × 125 mm |
| Driver Dimensions | 235 × 110 × 280 mm |
| Operating Temperature | 15–35 °C |
| Compliance | CE, RoHS, IEC 60825-1:2014 (Class 1M / 3B depending on wavelength & configuration) |
| Brand | Alphalas |
|---|---|
| Origin | Germany |
| Model | PLDD-100-40 |
| Pulse Width | <15 ps (FWHM) |
| Repetition Rate | Up to 100 MHz (adjustable) |
| Wavelength Options | 405 nm, 450 nm, 635 nm, 670 nm, 785 nm, 850 nm |
| Average Output Power | Up to 50 mW (wavelength-dependent) |
| Trigger Input | TTL-compatible, <10 ns jitter |
| Operating Temperature | 15–35 °C |
| Cooling | Thermoelectric (TEC) stabilized |
| Compliance | CE, RoHS, IEC 60825-1:2014 (Class 4 Laser Product) |
| Brand | AlphaLas |
|---|---|
| Origin | Germany |
| Model | PO-TWP |
| Spectral Range (UVIR) | 150 nm – 6.5 µm |
| Spectral Range (FIR) | 1 µm – 19 µm |
| Aperture Options | Ø11 mm, Ø24 mm, Ø16 mm |
| Thickness | 2.0–5.0 mm |
| Retardation Modes | λ/4, λ/2, continuous 0–360°, dual-wavelength (e.g., λ/2 @ fundamental & λ @ SHG), fs-optimized AR-coated variants |
| Mounting | Precision kinematic tilt/rotation stage included |
| Brand | Alphalas |
|---|---|
| Origin | Germany |
| Model | PULSELABS-A-1064-10W-SF |
| Wavelength | 1064 nm (fundamental), optional harmonics at 532 nm / 355 nm / 266 nm |
| Pulse Energy | 1 mJ @ 1064 nm |
| Average Power | 10 W @ 1064 nm |
| Peak Power | 80 kW @ 1064 nm |
| Spectral Linewidth | < 40 MHz |
| Pulse Duration | Nanosecond range (typ. 10–15 ns) |
| Beam Quality | Near-diffraction-limited (M² < 1.3) |
| Operation Mode | Single longitudinal mode (SLM) |
| Control Interface | Ethernet-enabled remote control |
| Laser Type | Diode-pumped solid-state (DPSS), Q-switched, microchip architecture |
| Brand | AlphaLas |
|---|---|
| Origin | Germany |
| Model | PULSELAS-A-1064-10W-SF |
| Wavelength | 1064 nm |
| Average Output Power | 10 W |
| Pulse Width (FWHM) | <1 ns (typ.) |
| Repetition Rate | Up to 10 kHz (adjustable) |
| Beam Quality (M²) | 1.01 (ISO 11146) |
| Beam Parameter Product (BPP) | 0.338 mm·mrad |
| Divergence (Full Angle, eff.) | 1.08 mrad |
| Side-Mode Suppression Ratio (SMSR) | >25 dB |
| Long-Term Power Stability (8 h) | <±0.5% RMS |
| Beam Pointing Stability (8 h) | <5 µrad RMS |
| Polarization | Linear, >100:1 |
| Cooling | Water-cooled |
| Compliance | CE, RoHS, IEC 60825-1:2014 Class 4 Laser Product |
| Brand | Alphalas |
|---|---|
| Origin | Germany |
| Model | PULSELAS-A-1064-10W-SF |
| Wavelength (fundamental) | 1064 nm |
| Pulse Energy (1064 nm) | 1 mJ |
| Average Power (1064 nm) | 10 W |
| Peak Power (1064 nm) | >80 kW |
| Pulse Width (FWHM, 1064 nm) | <12 ns |
| Repetition Rate | 10 kHz |
| Spectral Linewidth (1064 nm) | <40 MHz |
| Beam Quality (M², 1064 nm) | <1.2 |
| Power Stability (RMS) | ≤1% |
| Polarization Ratio (1064 nm) | >100:1 |
| Beam Diameter (1/e², 1064 nm) | 1.4 mm ±10% |
| Beam Divergence (1064 nm) | 1.0 mrad ±10% |
| Harmonic Options | 532 nm / 355 nm / 266 nm |
| Remote Control Interface | Ethernet (LAN, RJ-45) |
| Cooling | Closed-loop liquid cooling |
| Warm-up Time to 95% Output | <5 min |
| Operating Temperature | 20–28 °C |
| Compliance | ISO 11146 (beam quality), IEC 60825-1 (laser safety), CE-marked |
| Brand | AlphaLas |
|---|---|
| Origin | Germany |
| Model | PULSELAS-P |
| Wavelength | 1064 nm |
| Pulse Width | < 1 ns (typ. 800 ps) |
| Pulse Energy | up to 1500 µJ @ 100 Hz |
| Peak Power | > 1.5 MW |
| Average Power | up to 1 W |
| Repetition Rate | up to 100 kHz |
| Beam Quality | TEM₀₀ |
| Polarization Ratio | > 100:1 |
| Power Stability | < 2% RMS (1 h) |
| Output Beam Diameter | 0.3–0.4 mm |
| Beam Divergence | ~6 mrad |
| Laser Head Dimensions | 40 × 52 × 90 mm or 40 × 52 × 140 mm (HP/HE variants) |
| Harmonic Options | 532 nm, 355 nm, 266 nm (optional) |
| Triggering | Internal frequency generator (up to 5 kHz) and external TTL trigger standard |
| Pump Configuration | Free-space or fiber-coupled laser diode (LDF-30-P) |
| Brand | AlphaLas |
|---|---|
| Origin | Germany |
| Model | PULSELAS-P-1064-100 |
| Wavelength | 1064 nm |
| Pulse Width | <1 ns (sub-nanosecond) |
| Peak Power | 100 MW |
| Laser Type | Diode-Pumped Passive Q-Switched Microchip Solid-State Laser |
| Output | TEM₀₀, Polarized, Collimated Free-Space Beam |
| Repetition Rate | Up to 100 kHz (model-dependent) |
| Pulse Energy | Up to 10 µJ (typical at 10 kHz) |
| Beam Diameter | ~0.8 mm (1/e²) |
| Divergence | <2 mrad |
| Cooling | Conductive (thermoelectric or passive) |
| Compliance | CE, RoHS, IEC 60825-1:2014 Class 4 Laser Product |
| Brand | Alphalas |
|---|---|
| Origin | Germany |
| Model | RG1-1064-10K |
| Wavelength | 1064 nm (fundamental), optional harmonics at 532 nm / 355 nm / 266 nm |
| Pulse Width | <30 ps (FWHM) |
| Pulse Energy | 50 µJ @ 1064 nm |
| Peak Power | >2 MW @ 1064 nm |
| Timing Jitter | 3.5 ps RMS to external trigger |
| Repetition Rate | Adjustable |
| Beam Profile | Gaussian TEM₀₀ |
| Cooling | Air-cooled |
| Form Factor | Compact, OEM-integrated design |
| Brand | AlphaLas |
|---|---|
| Origin | Germany |
| Model | UPD Series |
| Spectral Range | 170–2600 nm |
| Rise Time | 15 ps to 75 ns |
| Bandwidth | DC to 25 GHz |
| Detector Materials | Si, GaAs, InGaAs, Ge |
| Input Options | Free-space (polished/diffuse MgF₂/quartz/glass windows), FC/PC fiber receptacle, or FC/APC-pigtailed fiber |
| Output Interface | SMA or BNC |
| Power Supply | Battery or external DC source |
| Housing | Anodized aluminum, hermetically sealed |
| Brand | Alphalas |
|---|---|
| Origin | Germany |
| Model | UPD Series |
| Spectral Range | 170–2600 nm |
| Rise Time | as low as 15 ps |
| Bandwidth | up to 25 GHz |
| Detector Materials | Si, GaAs, InGaAs, Ge |
| Output Interface | SMA or BNC |
| Housing | rugged anodized aluminum |
| Bias Options | battery or external DC supply |
| Input Options | free-space (polished/diffuse MgF₂/quartz/glass), FC/PC, FC/APC fiber-coupled |