Anritsu
Filter
Showing all 15 results
| Brand | Anritsu |
|---|---|
| Origin | Japan |
| Model | A80110042 |
| Wavelength Center | 1060 nm |
| Coherence Length | >15 mm (typ.) |
| Sweep Rate | Up to 100 kHz (configurable) |
| Output Power | ≥15 mW (fiber-coupled, SMF-28) |
| Tuning Range | ≥100 nm (full-width at half-maximum) |
| Linewidth (instantaneous) | <0.1 nm (typ.) |
| Polarization Extinction Ratio | >20 dB |
| Fiber Type | PM-fiber pigtail (FC/APC connector) |
| Operating Temperature | 15–35 °C |
| Compliance | CE, RoHS, IEC 61000-6-3 |
| Key | Brand: Anritsu |
|---|---|
| Model | AF4B116AA75L |
| Wavelength | 1475 ± 15 nm |
| Output Power | Up to 650 mW |
| Fiber Type | SMF or PMF |
| Package | 14-pin butterfly with TEC and monitor PD |
| Compliance | Telcordia GR-468-CORE, RoHS |
| Application | EDFA pumping |
| Origin | Japan |
| Core Technology | FP-LD (Fabry–Pérot Laser Diode) |
| Brand | Anritsu |
|---|---|
| Origin | Japan |
| Model | AH15199B |
| Frequency Range | 200 kHz – 105 GHz (-3 dB) |
| -6 dB Bandwidth | up to 135 GHz |
| Small-Signal Gain | 15.5 dB (typ.) |
| Output Linearity | 2.0 Vpp (typ.) |
| Power Consumption | 1.5 W (typ.) |
| Input/Output Connector | W-type |
| Dimensions | 36 mm × 18 mm × 18 mm |
| Dedicated Power Supply | AH15199B-01 |
| Brand | Anritsu |
|---|---|
| Origin | Japan |
| Model | AS3B119GM10M |
| Output Power | 15 mW (typ.) |
| Central Wavelength | 1310 nm |
| Spectral Bandwidth (FWHM) | ~45 nm (typ., standard for SLDs) |
| Polarization Extinction Ratio | ≥20 dB |
| Fiber Pigtail | PMF (Panda-type), FC/APC connector |
| Operating Temperature | 15–35 °C |
| Input Power | +5 V DC, ≤300 mA |
| Lifetime (MTTF) | >50,000 hours |
| Brand | Anritsu |
|---|---|
| Origin | Japan |
| Model | AS6B118GM50M |
| Wavelength | 1650 nm |
| Output Power | 10 mW |
| Polarization Extinction Ratio | ≥20 dB (typ.) |
| Spectral Bandwidth (FWHM) | ~40 nm |
| Fiber Pigtail | PM Panda Fiber, FC/PC Connector |
| Operating Temperature Range | 15–35 °C |
| Storage Temperature | –20–70 °C |
| Input Current | ≤150 mA |
| Forward Voltage | ~1.8 V |
| Polarization Axis Alignment Tolerance | ±2° |
| Brand | Anritsu |
|---|---|
| Origin | Japan |
| Model | AS8B115L240M |
| Light Source Type | Superluminescent Diode (SLD) |
| Central Wavelength | 840 nm |
| Output Power | Typical ≥1.5 mW (fiber-coupled, SMF-28) |
| Spectral Bandwidth (FWHM) | ~25 nm |
| Polarization Extinction Ratio | >20 dB |
| Operating Temperature Range | 15–35 °C |
| Warm-up Time | <5 minutes to stable output |
| Fiber Pigtail | SMF-28, FC/PC connector |
| Compliance | CE, RoHS, ISO 9001 manufacturing environment |
| Brand | Anritsu |
|---|---|
| Origin | Japan |
| Model | MG36021A |
| Frequency Range | 10 MHz to 20 GHz |
| Frequency Resolution | 0.001 Hz |
| Phase Noise (typ.) | –126 dBc/Hz at 10 GHz, 10 kHz offset |
| Harmonic Suppression | –10 dBc (nom.) |
| Non-Harmonic Spurious | –60 dBc |
| Frequency Switching Time (list mode) | <50 µs |
| Max Output Power | +18 dBm @ 20 GHz |
| Power Level Accuracy | ±1.5 dB |
| Reference Input/Output | 10 MHz |
| Supply Voltage | +12 V DC |
| Dimensions | 4 in × 4 in × 0.8 in (101.6 mm × 101.6 mm × 20.3 mm) |
| Control Interfaces | USB 3.0 Type-C, SPI (via CONTROL/SPI connector) |
| RF & Reference Connectors | SMA (REF IN, REF OUT, RF OUT) |
| Thermal Management | Optional external heatsink kit available |
| Brand | Anritsu |
|---|---|
| Origin | Japan |
| Model | MG3740A |
| Frequency Range | 10 kHz – 6 GHz |
| SSB Phase Noise | ≤ –140 dBc/Hz @ 100 MHz (20 kHz offset, CW), ≤ –131 dBc/Hz @ 1 GHz (20 kHz offset, CW) |
| Output Level Range | –110 to +17 dBm (standard), –144 to +17 dBm (with option) |
| Switching Speed | < 600 µs (frequency/amplitude, list/scan mode) |
| Modulation | FM/AM/φM/Pulse (standard) |
| Reference Oscillator Options | Standard (±1×10⁻⁶/year), High-Stability OCXO (±1×10⁻⁷/year), Rubidium (±1×10⁻¹⁰/month) |
| Interfaces | 1000BASE-T Ethernet, GPIB, USB 2.0 |
| SCPI Compliance | Full |
| Power Meter Support | Up to two USB power sensors (optional, sold separately) |
| Digital Modulation Software | IQproducer (license required, sold separately) |
| BER Measurement Capability (option) | Input bit rate 100 bps – 40 Mbps |
| Brand | Anritsu |
|---|---|
| Origin | Japan |
| Model | ML2490A / ML2480B / ML2430A |
| Frequency Range | Up to 50 GHz |
| Dynamic Range | Up to 90 dB |
| Sensor Modes | CW, Pulsed, Modulated |
| Compatible Software | PowerMax™ (ML2480B/ML2490A), PowerSuite (ML243xA) |
| Interface | Ethernet (PowerMax™), GPIB/RS-232 (PowerSuite) |
| OS Support | Windows XP SP2+ (PowerMax™), Windows 95+ (PowerSuite) |
| Brand | Anritsu |
|---|---|
| Origin | Japan |
| Model | ML2490A (Pulse-Optimized), ML2480B (Broadband Modulated), ML2430A (CW-Optimized) |
| Frequency Range | Up to 50 GHz |
| Dynamic Range | Up to 90 dB |
| Sensor Modes | CW, Pulsed, and Modulated Signal Support |
| Included Software | PowerMax™ (ML2480B/ML2490A), PowerSuite (ML243xA) |
| Interface | Ethernet (ML2480B/ML2490A), GPIB/RS-232 (ML243xA) |
| Compliance | Designed for ISO/IEC 17025 traceable calibration workflows, compatible with GLP/GMP data integrity requirements via audit-trail-capable software logging |
| Brand | Anritsu |
|---|---|
| Origin | Japan |
| Model | MS2840A-041 |
| Frequency Range | 9 kHz to 6 GHz |
| Phase Noise (1 GHz, 1 kHz offset) | –117 dBc/Hz (nom.) |
| DANL (1 GHz, Preamp OFF) | –153 dBm/Hz |
| RBW | 1 Hz to 31.25 MHz |
| Analysis Bandwidth | Up to 125 MHz (with options) |
| Input Impedance | 50 Ω (N-type female) |
| Operating Temperature | 0°C to +50°C |
| Weight | ≤14.5 kg |
| Power Supply | 100–240 VAC, 50/60 Hz |
| Brand | Anritsu |
|---|---|
| Origin | Japan |
| Model | MS9740B |
| Wavelength Range | 600–1750 nm |
| Wavelength Accuracy | ±20 pm (1520–1620 nm, RBW 0.03–0.2 nm) / ±100 pm (1520–1620 nm, RBW 0.5/1.0 nm) |
| Wavelength Resolution (RBW) | 0.03 / 0.05 / 0.07 / 0.1 / 0.2 / 0.5 / 1.0 nm (3 dB bandwidth) |
| Dynamic Range | ≥60 dB at 0.4 nm offset from peak |
| Minimum RBW | 30 pm |
| Scan Speed | ≤0.2 s for 5 nm span (RBW 0.1 nm, VBW 10 kHz) |
| Max Input Power | +23 dBm (with optical attenuator enabled) |
| Fiber Compatibility | SMF-28 (9/125 µm, ITU-T G.652), 50/125 µm GI fiber |
| Connector Options | Interchangeable FC, SC, ST, DIN, LC |
| Storage Capacity | Up to 1,000 files or 10,000 spectra |
| Interfaces | Ethernet (standard), GPIB (optional) |
| Dimensions | 426 × 177 × 350 mm (W×H×D, excluding protrusions) |
| Weight | ≤15.0 kg (excluding options) |
| Power Consumption | ≤75 VA |
| Brand | Anritsu |
|---|---|
| Model | MS9740B |
| Wavelength Range | 600 nm – 1750 nm |
| Wavelength Accuracy | ±20 pm (C/L-band, with calibration source) |
| Resolution Bandwidth | 0.03 nm – 1.0 nm (selectable) |
| Dynamic Range | >58 dB (at ±0.4 nm from peak, 0.05 nm RBW) |
| Sensitivity | –90 dBm |
| Minimum Resolution | 30 pm |
| SMSR Measurement Limit | ≥45 dB |
| SMSR Reproducibility | ±1.4 dB |
| Scan Speed | ≤0.2 s (5 nm span, 0.1 nm RBW) |
| Input Fiber Compatibility | SMF, MMF (50/125 µm, 62.5/125 µm) |
| Connector Types | FC, SC, ST, DIN (LC via adapter) |
| Max Input Power | +23 dBm (with attenuator) |
| Brand | Anritsu |
|---|---|
| Origin | Japan |
| Model | Rubidium™ MG362x1A |
| Frequency Range | 9 kHz – 70 GHz (extendable to 72 GHz) |
| Phase Noise Options | Standard / Low-Noise (Option 3) / Ultra-Low-Noise (Option 13) |
| Output Power | Up to +30 dBm (standard), +16 dBm @ 43.5 GHz, +6 dBm @ 70 GHz |
| Modulation Types | AM, FM, PM, Pulse, Arbitrary Waveform |
| Rack Height | 3U |
| Interface Standards | GPIB (IEEE-488), LAN (10/100/1000BASE-T), USB 2.0 (Type A/B), SDIO, Auxiliary I/O (25-pin & 15-pin), Rear-panel RF Output (K(m)-type, Option 9) |
| Brand | Anritsu |
|---|---|
| Origin | Japan |
| Model | SOA-W1300-G15-SL |
| Wavelength | 1300 nm |
| Operating Band | O-band (1260–1360 nm) |
| Gain | ≥15 dB |
| Polarization-Dependent Gain (PDG) | <0.5 dB |
| Noise Figure | ≤7.5 dB |
| Input/Output Connector | FC/APC or FC/PC (configurable) |
| Package Type | Butterfly 14-pin with TEC and Monitor Photodiode |
| Operating Temperature | 15–35 °C |
| Compliance | RoHS, CE, Telcordia GR-468-CORE |