Anyan (Hangzhou Anyan Instrument Co., Ltd.)
Filter
Showing all 28 results
| [Brand | ANYAN (Hangzhou Anyan Instrument Co., Ltd.) |
|---|---|
| Origin | Zhejiang, China |
| Model | AYAN-100LB |
| Nitrogen Purity | 95–99.999% |
| Output Flow | 0–100 L/min |
| Output Pressure | 0–0.7 MPa |
| Dew Point | −40 °C |
| Noise Level | ≤65 dB(A) |
| Power Supply | 380 V ±10%, 50 Hz ±5% |
| Rated Power | 4.5 kW |
| Ambient Temperature | −10 to 40 °C |
| Relative Humidity | ≤85% RH (non-condensing) |
| Dimensions (W×D×H) | 1400 × 950 × 1300 mm |
| Weight | 380 kg] |
| Brand | Anyan (Hangzhou Anyan Instrument Co., Ltd.) |
|---|---|
| Origin | Zhejiang, China |
| Model | AYAN-10L |
| Nitrogen Generation Principle | Membrane Separation |
| Nitrogen Purity | 99%–99.9% |
| Dew Point | -40 °C |
| Output Flow Rate | 10 L/min |
| Adjustable Output Pressure | 0–0.6 MPa |
| Integrated Air Compressor | Yes |
| Power Supply | 220 V, 50 Hz |
| Total Power Consumption | 1600 W |
| Safety Valve | ISO-compliant |
| Mobility | Casters-equipped chassis |
| Enclosure Design | Fully integrated, modular benchtop unit |
| Brand | Anyan (Hangzhou Anyan Instrument Co., Ltd.) |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Regional Classification | Domestic (PRC) |
| Model | AYAN-20L3 |
| Nitrogen Generation Principle | Membrane Separation |
| Output Flow Rate | 0–20 L/min |
| Output Pressure | 0–0.4 MPa |
| Nitrogen Purity | 99% |
| Dew Point | −40 °C |
| Integrated Air Compressor | Yes |
| Filtration Stages | Three-stage (Particulate < 0.01 µm, Oil & Moisture < 0.003 mg/m³) |
| Real-time Purity Display | Yes |
| Noise Reduction | Suspended Vibration-Isolation Mounting |
| Brand | ANYAN (Hangzhou Anyan Instrument Co., Ltd.) |
|---|---|
| Origin | Zhejiang, China |
| Model | AYAN-25K |
| Instrument Type | Vacuum Parallel Concentrator |
| Temperature Range | Ambient to 100 °C |
| Temperature Control Accuracy | ±1 °C |
| Oscillation Speed | 0–300 rpm |
| Sample Capacity | 25 positions (150–200 mL vials) |
| Timer Range | 0–999 min |
| Heating Method | Water Bath |
| Included Systems | Integrated Vacuum Pump, Dual-Tower Condensation Module, Closed-Loop Water Circulation Chiller |
| Brand | ANYAN (Hangzhou Anyan Instrument Co., Ltd.) |
|---|---|
| Origin | Zhejiang, China |
| Model | AYAN-35L1 |
| Nitrogen Generation Principle | Membrane Separation Technology |
| Output Flow Rate | Not specified in source data |
| Output Pressure | Not specified in source data |
| Nitrogen Purity | 99–99.9% |
| Dew Point | –40 °C |
| Integrated Air Compressor | Yes |
| Noise Reduction | Suspended Acoustic Isolation System |
| Pressure Regulation | Dual-Stage Adjustable |
| Structural Design | All-in-One Modular Integration (Compressor + Pre-Filtration + Membrane Separation + Drying + Buffer Tank) |
| Safety Features | Built-in Pressure Vessel with ASME/ISO-Compliant Safety Valve |
| Mobility | Castor-Mounted Chassis |
| Monitoring | Real-Time Nitrogen Purity Display |
| Maintenance Alerts | Filter Failure Warning System |
| Compliance Context | Designed to support GLP/GMP-compliant LC-MS laboratories requiring continuous, traceable, and auditable nitrogen supply per FDA 21 CFR Part 11 and ISO/IEC 17025 operational expectations |
| [Brand | ANYAN (Hangzhou Anyan Instrument Co., Ltd.) |
|---|---|
| Origin | Zhejiang, China |
| Model | AYAN-35L1 |
| Nitrogen Generation Principle | Membrane Separation |
| Nitrogen Purity | 99.0–99.9% |
| Dew Point | -40°C |
| Output Flow Rate | Configurable per system demand (standard range: 0–35 L/min) |
| Output Pressure | Adjustable, up to 0.7 MPa (g) |
| Integrated Air Compressor | Yes |
| Noise Level | ≤55 dB(A) |
| Safety Compliance | Integrated pressure relief valve per ISO 4414 |
| Design | All-in-one modular architecture with built-in air drying, filtration, and nitrogen stabilization] |
| Brand | Anyan (Hangzhou Anyan Instrument Co., Ltd.) |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Country of Manufacture | China |
| Model | AYAN-60L1 |
| Nitrogen Generation Principle | Polymeric Membrane Separation |
| Output Flow Rate | 60 L/min |
| Output Pressure Range | 0–0.6 MPa |
| Nitrogen Purity | 99% |
| Dew Point | Not Specified |
| Filtration Grade | 0.01 µm particulate removal & 0.003 mg/m³ oil/water aerosol retention |
| Integrated Air Compressor | Yes |
| Noise Level | Low (acoustic isolation suspension system) |
| Pressure Regulation | Dual-stage adjustable |
| Real-time Purity Monitoring | Yes |
| Desiccant Pre-treatment | Integrated coalescing + refrigerated dryer + adsorption-type water separator |
| Filter Stages | Three-stage independent filtration |
| [Brand | Anyan (Hangzhou Anyan Instrument Co., Ltd.) |
|---|---|
| Origin | Zhejiang, China |
| Model | AYAN-60LG |
| Nitrogen Generation Principle | Membrane Separation Technology |
| Output Flow Rate | 60 L/min |
| Output Pressure | 0–0.6 MPa |
| Nitrogen Purity | 99%–99.9% |
| Dew Point | -40 °C |
| Filtration Stages | Three-Stage |
| Total Power Consumption | 3800 W |
| Input Voltage | 380 V AC |
| Dimensions (W×D×H) | 400 × 300 × 1300 mm] |
| Brand | ANYAN (Hangzhou Anyan Instrument Co., Ltd.) |
|---|---|
| Origin | Zhejiang, China |
| Model | AYAN-80LB |
| Nitrogen Production Principle | Dual-Tower Pressure Swing Adsorption (PSA) |
| Nitrogen Purity | 99.0%–99.999% |
| Dew Point | -40 °C |
| Output Pressure Range | 0–0.7 MPa |
| Integrated Components | Air Compressor, Refrigerated Air Dryer, Multi-Stage Filtration System, Carbon Molecular Sieve (CMS) Adsorption Towers, Nitrogen Buffer Tank, Onboard Purity Analyzer & Flow Meter |
| Compliance | Designed for continuous industrial operation under ISO 8573-1 Class 2:2:2 compressed air quality requirements |
| Brand | Anyan (Hangzhou Anyan Instrument Co., Ltd.) |
|---|---|
| Origin | Zhejiang, China |
| Model | AYAN-B100 |
| Evaporator Internal Diameter | 100 mm |
| Evaporation Area | 0.15 m² |
| Condensation Area | 0.25 m² |
| Feed Volume | 2 L |
| Processing Flow Rate | 0.5–5.0 L/h |
| Motor Power | 120 W |
| Max Rotational Speed | ≤450 rpm |
| Light Fraction Collection Bottle | 2 L |
| Heavy Fraction Collection Bottle | 2 L |
| Cold Trap | Integrated |
| External Condenser | Equipped |
| Cooling System | Built-in |
| Ultimate Vacuum | <100 Pa |
| Heating Temperature Range | Ambient to 200 °C |
| 刮板材质 | PTFE (standard), optional carbon fiber for >150 °C operation |
| Brand | ANYAN (Hangzhou Anyan Instrument Co., Ltd.) |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | AYAN-B150 |
| Price | USD 21,000 (FOB Zhejiang) |
| Brand | Anyan (Hangzhou Anyan Instrument Co., Ltd.) |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | AYAN-B200 |
| Price | USD 28,000 (FOB Shanghai) |
| Brand | Anyan (Hangzhou Anyan Instrument Co., Ltd.) |
|---|---|
| Origin | Shanghai, China |
| Model | AYAN-B220 |
| Heating Surface Diameter | 220 mm |
| Evaporation Area | 0.5 m² |
| Condensation Area | 0.65 m² |
| Feed Volume Capacity | 5 L |
| Processing Flow Rate | 2.0–15.0 L/h |
| Motor Power | 200 W |
| Max Rotational Speed | ≤450 rpm |
| 刮板间� | �: 0.5–1.5 mm |
| Vacuum Capability | ≤1 Pa (absolute) |
| Heating Temperature Range | Ambient to 200 °C |
| Light Fraction Collection Bottle | 5 L |
| Heavy Fraction Collection Bottle | 5 L |
| Integrated Cold Trap | Yes |
| External Condenser | Yes |
| Cooling System | Yes |
| [Brand | ANYAN (Hangzhou Anyan Instrument Co., Ltd.) |
|---|---|
| Origin | Zhejiang, China |
| Model | AYAN-B80 |
| Effective Evaporation Area | 0.1 m² |
| Evaporator Internal Diameter | 80 mm |
| Condenser Area | 0.15 m² |
| Feed Rate | 0.5–4.0 L/h |
| Vacuum Capability | < 0.1 Pa |
| Heating Temperature Range | Ambient to 200 °C |
| Wiper Material | PTFE + SS316L |
| Sealing | Fluoroelastomer (FKM) gaskets, optional PTFE |
| Motor Power | 120 W |
| Max. Wiper Speed | ≤ 450 rpm |
| Light Fraction Collection Bottle | 1 L |
| Heavy Fraction Collection Bottle | 1 L |
| Integrated Cold Trap | Yes |
| External Condensation Unit | Yes |
| Cooling System | Integrated] |
| Brand | ANYAN (Hangzhou Anyan Instrument Co., Ltd.) |
|---|---|
| Origin | Zhejiang, China |
| Model | AYAN-DC16G |
| Sample Capacity | 16 positions |
| Heating Method | Dry block heating |
| Temperature Range | Ambient to 100 °C |
| Temperature Accuracy | ±1 °C |
| Display | 7-inch LCD touch screen |
| Control Modes | 5 preset modes |
| Programmable Temperature Segments | 50 |
| Timer Range | 0–999 min |
| Visual Design | 4-sided transparent viewing windows |
| Sample Access | Drawer-style sliding tray |
| Needle Adjustment | Dual-mode (fine-tuning + rapid lift) |
| Gas Pressure Regulation | 0–0.8 MPa |
| Independent Gas Flow Control | 16-channel electromagnetic valve array |
| Preheated Nitrogen Inlet | ~45 °C |
| Integrated Circulating Fan System | Yes |
| Dual-seal Door Protection | Yes |
| Built-in Data Logging | Yes |
| Heating Power | 220 W |
| Heating Block Material | Aerospace-grade aluminum alloy |
| Module Diameter Compatibility | 16 mm (interchangeable) |
| Brand | ANYAN (Hangzhou Anyan Instrument Co., Ltd.) |
|---|---|
| Origin | Zhejiang, China |
| Model | AYAN-DC16G |
| Heating Method | Dry-block heating |
| Temperature Range | Ambient to 100 °C |
| Temperature Accuracy | ±1 °C |
| Sample Capacity | 16 positions |
| Heating Power | 220 W |
| Display | 7-inch capacitive touch LCD |
| Programmable Stages | 50 segments |
| Control Modes | 5 preset operational modes |
| Gas Pressure Range | 0–0.8 MPa |
| Independent Gas Flow Control | 16 channels |
| Sample Tube Diameter | 16 mm (interchangeable modules) |
| Timer Range | 0–999 min |
| Vertical Needle Adjustment | Dual-mode (fine-tuning + rapid lift) |
| Integrated Preheated N₂ Supply | ~45 °C |
| Sealing System | Dual-layer door gasket with recirculating fan |
| Housing Design | Front & side observation windows |
| Sample Tray | Drawer-type sliding rack |
| Data Logging | Built-in storage for runtime parameters |
| Safety Features | Over-temperature alarm, automatic gas shutoff logic, sealed chamber architecture |
| [Brand | ANYAN (Hangzhou Anyan Instrument Co., Ltd.) |
|---|---|
| Origin | Zhejiang, China |
| Model | AYAN-DC36S |
| Heating Method | Water Bath |
| Temperature Range | Ambient to 100 °C |
| Temperature Uniformity | ±1 °C |
| Sample Capacity | 36 positions |
| Tube Diameter Compatibility | 10–29 mm |
| Nitrogen Flow Rate | 18 L/min |
| Heating Power | 300 W |
| Display | 7-inch LCD Touchscreen |
| Programmable Control | 50-segment, 5-mode temperature ramping |
| Preheated Nitrogen Inlet | ~45 °C |
| Timer Range | 0–999 min |
| Power Supply | 220 V, 50 Hz |
| Net Weight | 25 kg] |
| Brand | Anyan (Hangzhou Anyan Instrument Co., Ltd.) |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Manufacture | China |
| Model | AYAN-DC90G |
| Price Range | USD 6,700 – 7,000 (FOB) |
| Heating Method | Dry-block heating |
| Temperature Range | Ambient to 100 °C |
| Temperature Stability | ±0.5 °C |
| Sample Capacity | 90 positions |
| Tube Diameter Compatibility | 10–29 mm |
| Nitrogen Flow Rate | 30 L/min |
| Heating Power | 300 W |
| Control Interface | 7-inch capacitive touchscreen |
| Programmable Segments | 50-step temperature ramping |
| Independent Gas Channel Control | 15 channels |
| Pressure Regulation Range | 0–0.8 MPa |
| Preheated Nitrogen Output | ~45 °C |
| Visual Access | Four-sided transparent chamber with dual observation windows |
| Sample Tray | Drawer-type sliding rack |
| Safety Features | Dual-sealed door system, built-in exhaust fan, over-temperature alarm, grounded 3-pin power input |
| [Brand | ANYAN (Hangzhou Anyan Instrument Co., Ltd.) |
|---|---|
| Origin | Zhejiang, China |
| Model | AYAN-F100 |
| Effective Evaporation Area | 0.15 m² |
| Evaporator Internal Diameter | 100 mm |
| Condensation Area | 0.25 m² |
| Feed Flow Rate | 0.5–5.0 L/h |
| Ultimate Vacuum (No-Load) | <10 Pa |
| Heating Temperature Range | Ambient to 200 °C |
| Wiper Material | PTFE + SS316L |
| Sealing | Fluoroelastomer (FKM) Gaskets |
| Motor Power | 120 W |
| Max Rotational Speed | ≤450 rpm |
| Light Fraction Collection Vessel | 2 L |
| Heavy Fraction Collection Vessel | 2 L |
| Integrated Cold Trap | Yes |
| External Condenser | Optional] |
| Brand | ANYAN (Hangzhou Anyan Instrument Co., Ltd.) |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Country of Manufacture | China |
| Model | AYAN-F80 |
| Feed Rate | 0.5–4.0 L/h |
| Effective Evaporation Area | 0.1 m² |
| Evaporator Inner Diameter | 80 mm |
| Condensation Area | 0.15 m² |
| Compatible Collection Flasks | Standard KL/ISO-K glassware (e.g., 50–500 mL round-bottom flasks) |
| [Brand | ANYAN (Hangzhou Anyan Instrument Co., Ltd.) |
|---|---|
| Origin | Zhejiang, China |
| Model | AYAN-H1000ml |
| Hydrogen Purity | ≥99.999% |
| Output Flow Rate | 0–1000 mL/min |
| Output Pressure | 0–0.4 MPa (adjustable, factory-set at 0.3 MPa) |
| Power Consumption | 180 W |
| Input Power | 220 V ±10%, 50 Hz ±5% |
| Operating Temperature | 0–50 °C |
| Relative Humidity | ≤85% RH |
| Dimensions (W×D×H) | 310 × 190 × 360 mm |
| Weight | 12 kg |
| Gas Outlet | 1/8" NPT or Φ3 mm stainless steel tubing |
| Water Refill | Automatic + manual top-up |
| Core Technology | Zero-gap SPE proton exchange membrane electrolysis |
| Compliance | Designed for GLP-compliant lab environments |
| Brand | ANYAN (Hangzhou Anyan Instrument Co., Ltd.) |
|---|---|
| Origin | Zhejiang, China |
| Model | AYAN-H500ml |
| Hydrogen Purity | ≥99.999% |
| Output Flow Rate | 0–500 mL/min |
| Output Pressure | 0–0.4 MPa (factory-set at 0.3 MPa) |
| Power Supply | 220 V ±10%, 50 Hz ±5% |
| Power Consumption | 120 W |
| Operating Temperature | 0–50 °C |
| Relative Humidity | ≤85% RH |
| Dimensions (W×D×H) | 310 × 190 × 360 mm |
| Weight | 12 kg |
| Gas Outlet | 1/8" NPT or Φ3 mm stainless steel tube |
| Electrolyte | KOH aqueous solution (analytical grade) |
| Construction | Electropolished stainless steel gas path |
| Safety Features | Dual-stage pressure relief, anti-backflow valve, overpressure cutoff |
| Brand | ANYAN (Hangzhou Anyan Instrument Co., Ltd.) |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | CY-8000Y |
| Sample Types | Emulsions, Suspensions |
| Max Feed Rate | 20–2000 mL/h (dependent on solids content) |
| Inlet Temp Range | 30–400 °C |
| Outlet Temp Range | 30–200 °C |
| Evaporation Capacity | 1500–2000 mL/h |
| Minimum Feed Volume | 50 mL |
| Nozzle Orifice Options | 0.5 / 0.7 / 0.75 / 1.0 / 1.5 / 2.0 mm |
| Temperature Control Accuracy | ±0.5 °C (PID-regulated) |
| Average Drying Time | 0.8–1.0 s |
| Power Supply | 3.8 kW / 220 V |
| Dimensions (H×L×W) | 1380 × 770 × 590 mm |
| Noise Level | <60 dB(A) |
| Construction | 316L stainless steel frame + borosilicate glass drying chamber, cyclone, and collection vessel |
| Brand | ANYAN (Hangzhou Anyan Instrument Co., Ltd.) |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | CY-8000Y |
| Sample Types | Emulsions, Suspensions |
| Max. Feed Rate | 20–2000 mL/h (dependent on solids content) |
| Inlet Air Temperature Range | 30–400 °C |
| Outlet Air Temperature Range | 30–200 °C |
| Evaporation Capacity | 1500–2000 mL/h |
| Drying Time | 0.8–1.0 s |
| Temperature Control Accuracy | ±0.5 °C (PID real-time regulation) |
| Nozzle Orifice Options | 0.5, 0.7, 0.75, 1.0, 1.5, 2.0 mm |
| Power Supply | 3.8 kW / 220 V |
| Dimensions (H×L×W) | 1380 × 770 × 590 mm |
| Noise Level | <60 dB(A) |
| Material | 316L stainless steel frame & fluid path |
| Brand | ANYAN (Hangzhou Anyan Instrument Co., Ltd.) |
|---|---|
| Origin | Zhejiang, China |
| Model | CY-8000YT |
| Sample Compatibility | Aqueous & organic solvent-based solutions, suspensions, emulsions |
| Max. Feed Rate | 20–1000 mL/h (rated capacity: 1500 mL/h) |
| Temperature Range | 0–250 °C |
| Vacuum Range | −0.05 to −0.06 MPa |
| Heating Control Accuracy | ±1 °C (PID-regulated) |
| Nozzle Orifices | 0.7, 1.0, 1.5, 2.0 mm (interchangeable) |
| Minimum Sample Volume | 50 mL |
| Power Supply | 5.8 kW / 380 V |
| Dimensions (W×D×H) | 850 × 1000 × 1650 mm |
| Particle Size Distribution | Normal (Gaussian), optimized for flowability and reconstitution |
| Brand | ANYAN (Hangzhou Anyan Instrument Co., Ltd.) |
|---|---|
| Origin | Zhejiang, China |
| Model | DC16G |
| Heating Method | Dry-block heating |
| Temperature Control Range | ±1 °C |
| Sample Capacity | 16 positions |
| Heating Power | 220 W |
| Heating Block Material | High-purity aluminum alloy |
| Display | 7-inch capacitive touch LCD |
| Temperature Range | Ambient to 100 °C |
| Timer Range | 0–999 min |
| Gas Pressure Regulation | 0–0.8 MPa |
| Independent Gas Flow Control | 4-channel electromagnetic valve array |
| Pre-heated N₂ Inlet | ~45 °C |
| Filtration | 0.01 µm nitrogen particulate filter |
| Safety Features | Over-temperature cutoff, real-time pressure monitoring, automatic fault detection and alarm |
| Viewing System | Four-sided transparent chamber with dual observation windows and drawer-type sample tray |
| Gas Delivery | Integrated pre-heating module + sealed gas distribution manifold |
| Data Logging | Onboard storage for runtime parameters (temperature, pressure, time) |
| Compliance Support | Designed for GLP-compliant workflows |
| [Brand | ANYAN (Hangzhou Anyan Instrument Co., Ltd.) |
|---|---|
| Origin | Zhejiang, China |
| Model | AYAN-H1000ml |
| Hydrogen Generation Principle | Pure Water Electrolysis (KOH-free PEM-compatible design) |
| Output Flow Rate | 0–1000 mL/min |
| Output Pressure | 0–0.4 MPa (adjustable, factory-set at 0.3 MPa) |
| Hydrogen Purity | ≥99.999% |
| Power Consumption | ≤180 W |
| Input Voltage | 220 V ±10%, 50 Hz ±5% |
| Operating Temperature | 0–50 °C |
| Relative Humidity | ≤85% RH |
| Dimensions (W×D×H) | 310 × 190 × 360 mm |
| Weight | 12 kg |
| Gas Outlet | 1/8″ NPT or Φ3 mm stainless steel tubing |
| Water Refill | Automatic + manual backup |
| Safety Protections | Low-water-level alarm, overpressure shutdown, hydrogen leak detection, dual-stage overcurrent protection |
| Compliance | Designed to meet ISO 8573-1 Class 1 compressed gas purity requirements for GC carrier gas] |
| [Brand | AnYan (Hangzhou AnYan Instrument Co., Ltd.) |
|---|---|
| Origin | Zhejiang, China |
| Model | AYAN-B150 |
| Effective Evaporation Area | 0.25 m² |
| Evaporator Internal Diameter | 150 mm |
| Condensing Area | 0.45 m² |
| Feed Capacity | 1.0–8.0 L/h |
| Operating Vacuum | < 0.1 Pa |
| Heating Temperature Range | Ambient to 200 °C |
| Film Thickness | < 0.5 mm |
| Rotational Speed | ≤ 450 rpm |
| Motor Power | 120 W |
| Light Fraction Collection Flask | Standard Configurable Volumes |
| Heavy Fraction Collection Flask | Standard Configurable Volumes |
| Integrated Cold Trap | Yes |
| External Condensation Unit | Yes |
| Cooling System | Built-in Circulating Chiller Interface |
| Construction Materials | SS316L + PTFE刮板 |
| Sealing | Fluoroelastomer (FKM) Gaskets |