ANYAN
Filter
Showing 1–30 of 49 results
| Brand | Anyan |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | AYAN-10LG |
| Output Flow Rate | 10 L/min |
| Output Pressure | 0–0.6 MPa |
| Nitrogen Purity | 99% or 99.9% (selectable) |
| Dew Point | ≤−40 °C |
| Principle | Pressure Swing Adsorption (PSA) with Carbon Molecular Sieve (CMS) |
| Integrated Air Compressor | Yes |
| Filtration | Triple-stage (particulate <0.01 µm, oil & moisture <0.003 mg/m³) |
| Power | 1600 W |
| Voltage | 220 V, 50 Hz |
| Dimensions | 500 × 330 × 710 mm |
| Noise Level | <60 dB(A) |
| Startup Time | ≤3 min |
| Display | Real-time nitrogen purity and pressure monitoring |
| Brand | Anyan |
|---|---|
| Origin | Zhejiang, China |
| Model | AYAN-15L |
| Nitrogen Generation Principle | Membrane Separation |
| Output Flow Rate | 15 L/min |
| Output Pressure Range | 0–0.6 MPa |
| Nitrogen Purity | 99% |
| Dew Point | −45 °C |
| Filtration Stages | Three-Stage |
| Power Consumption | 2000 W |
| Input Voltage | 220 V, 50 Hz |
| Compliance | CE-marked design principles |
| Brand | Anyan |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Country of Manufacture | China |
| Model | AYAN-15LB |
| Nitrogen Generation Principle | Polymeric Membrane Separation |
| Output Flow Rate | 15 L/min |
| Output Pressure Range | 0–0.4 MPa |
| Nitrogen Purity | 99.9% |
| Dew Point | −40 °C |
| Integrated Air Compressor | Yes |
| Filtration Stages | 3-stage (particulate < 0.01 µm, oil aerosol < 0.003 mg/m³) |
| Real-time Purity Display | Yes |
| Noise Level | ≤62 dB(A) |
| Start-up Time | ≤3 min |
| Brand | Anyan |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | AYAN-15LG |
| Output Flow Rate | 15 L/min |
| Output Pressure Range | 0–0.4 MPa |
| Nitrogen Purity | 99.9% |
| Dew Point | −40 °C |
| Separation Principle | Polymeric Membrane Gas Separation |
| Brand | Anyan |
|---|---|
| Origin | Zhejiang, China |
| Model | AYAN-1LG |
| Nitrogen Generation Principle | Polymeric Membrane Separation |
| Output Flow Rate | 1 L/min |
| Output Pressure Range | 0–0.6 MPa |
| Nitrogen Purity | 99.9% |
| Dew Point | −40 °C |
| Integrated Air Compressor | Yes |
| Filtration Grade | 0.01 µm particles, ≤0.003 mg/m³ oil & moisture |
| Display | Real-time N₂ purity indicator |
| Noise Level | Low (acoustically isolated compressor) |
| Pressure Regulation | Dual-stage adjustable |
| Compliance | Designed for GLP-compliant lab environments |
| Maintenance | No consumables |
| Brand | Anyan |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | AYAN-20L2 |
| Nitrogen Generation Principle | Membrane Separation |
| Output Flow Rate | 20 L/min |
| Output Pressure Range | 0–0.6 MPa |
| Nitrogen Purity | 99% |
| Dew Point | Not specified in source data |
| Power Consumption | 2600 W |
| Input Voltage | 380 V AC |
| Dimensions (W×D×H) | 400 × 300 × 1300 mm |
| Filtration Stages | Three-stage |
| Particle Removal Efficiency | <0.01 µm |
| Oil & Moisture Content | ≤0.003 mg/m³ |
| Brand | Anyan |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | AYAN-20LG |
| Nitrogen Generation Principle | Polymeric Membrane Separation |
| Output Flow Rate | 20 L/min |
| Output Pressure Range | 0–0.6 MPa |
| Nitrogen Purity | 99.9% |
| Dew Point | ≤ −40 °C (typical for membrane systems with integrated desiccant pre-filtration) |
| Power Consumption | 2600 W |
| Input Voltage | 380 V AC |
| Dimensions (W×D×H) | 400 × 300 × 1300 mm |
| Filtration Stages | Three-stage (particulate < 0.01 µm, oil aerosol < 0.003 mg/m³) |
| Internal Air Compressor | Yes |
| Noise Level | ≤ 62 dB(A) |
| Start-up Time | ≤ 3 min |
| Display | Real-time nitrogen purity indicator |
| Brand | Anyan |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | AYAN-25LG |
| Nitrogen Generation Principle | Membrane Separation |
| Output Flow Rate | 25 L/min |
| Output Pressure Range | 0–0.4 MPa |
| Nitrogen Purity | 99% |
| Dew Point | −40 °C |
| Integrated Air Compressor | Yes |
| Filtration Grade | 0.01 µm particles, 0.003 mg/m³ oil aerosol |
| Onboard Purity Monitoring | Yes |
| Noise Level | <60 dB(A) |
| Startup Time | ≤3 min |
| Compliance Reference | HJL Standard “Energy-Saving Carbon Molecular Sieve Nitrogen Generator” |
| Operating Ambient | −10 to 45 °C, 35–90% RH |
| Brand | Anyan |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Category | Domestic |
| Model | AYAN-300LB |
| Instrument Type | Nitrogen Generator |
| Nitrogen Production Principle | Dual-Tower Parallel Pressure Swing Adsorption (PSA) |
| Nitrogen Purity | 99.0%–99.999% |
| Dew Point | −40 °C |
| Output Flow | Up to 300 L/min (configurable per purity grade) |
| Output Pressure | 0–0.7 MPa |
| Noise Level | ≤65 dB(A) |
| Power Supply | 380 V ±10%, 50 Hz ±5% |
| Rated Power | 4.5 kW |
| Ambient Temperature Range | −10 °C to 40 °C |
| Relative Humidity | ≤85% RH (non-condensing) |
| Dimensions (W×D×H) | 1400 × 950 × 1300 mm |
| Weight | 380 kg |
| Integrated Components | Oil-free air compressor, refrigerated air dryer, multi-stage particulate & coalescing filters, carbon-based oil scavenger, nitrogen purity analyzer, mass flow meter, air receiver tank, nitrogen buffer tank |
| Brand | Anyan |
|---|---|
| Origin | Zhejiang, China |
| Model | AYAN-300ML |
| Output Flow Rate | 300 mL/min |
| Output Pressure | 0–0.4 MPa |
| Nitrogen Purity | >99.999% |
| Dew Point | −45 °C |
| Power Consumption | 150 W |
| Input Power | AC 230 V, 50/60 Hz |
| Dimensions (L×W×H) | 400 × 250 × 350 mm |
| Operating Temperature | 10–40 °C |
| Relative Humidity | <85% RH (non-condensing) |
| Feed Air Requirement | Clean, oil-free, dried compressed air or ambient air with ≥1 MΩ·cm resistivity water for integrated humidification (if equipped) |
| Output Port | 3 mm OD tubing or 1/8″ NPT (M8×1 external thread) |
| Brand | ANYAN |
|---|---|
| Origin | Shanghai, China |
| Model | AYAN-300ML |
| Nitrogen Generation Principle | Hollow-Fiber Membrane Separation |
| Output Flow Rate | 500 mL/min |
| Output Pressure Range | 0–0.4 MPa |
| Nitrogen Purity | >99.999% (v/v) |
| Dew Point | –40 °C to –60 °C (at 0.1 MPa, typical for membrane systems) |
| Power Consumption | ≤150 W |
| Pressure Stability | <±0.2% FS |
| Output Interface | 3 mm OD tubing or 1/8" NPT (M8×1 external thread) |
| Water Consumption | ~10 mL/h |
| Feed Air Requirement | Oil-free, particle-filtered compressed air (ISO 8573-1 Class 1.2.1 recommended) |
| Power Supply | AC 230 V, 50/60 Hz, 2 A fuse |
| Operating Environment | 10–40 °C, RH <85%, non-condensing, low-dust |
| Dimensions (L×W×H) | 400 × 250 × 350 mm |
| Weight | ~18 kg |
| Compliance | CE-marked per Machinery Directive 2006/42/EC and EMC Directive 2014/30/EU |
| Software Interface | None (standalone analog control) |
| Brand | Anyan |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | AYAN-300MLG |
| Nitrogen Generation Principle | Electrolytic Separation |
| Output Flow Rate | 0–300 mL/min |
| Output Pressure | 0–0.4 MPa |
| Nitrogen Purity | 99.997% |
| Dew Point | −40 °C |
| Power Consumption | 150 W |
| Input Water Conductivity | ≥1 MΩ·cm (Resistivity) |
| Dimensions (L×W×H) | 400 × 250 × 350 mm |
| Weight | Approx. 18 kg |
| Operating Temperature | 10–40 °C |
| Relative Humidity | <85% RH (non-condensing) |
| Output Port | 3 mm OD tubing or 1/8″ male NPT (M8×1 external thread) |
| Integrated Buffer Tank | Yes |
| Safety Valve | ISO-compliant pressure relief device |
| Mobility | Equipped with locking casters |
| Brand | Anyan |
|---|---|
| Origin | Zhejiang, China |
| Model | AYAN-30L Membrane Nitrogen Generator |
| Nitrogen Generation Principle | Hollow-Fiber Membrane Separation |
| Output Flow Rate | 30 L/min |
| Output Pressure | 0.3 MPa |
| Nitrogen Purity | 99–99.9% |
| Dew Point | −40 °C |
| Filtration | Triple-Stage (Particulates < 0.01 µm |
| Power Consumption | 3200 W |
| Input Voltage | 380 V AC |
| Dimensions | 400 × 300 × 1300 mm |
| Brand | Anyan |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | AYAN-30L |
| Nitrogen Generation Principle | Polymeric Membrane Separation |
| Output Flow Rate | 30 L/min |
| Output Pressure Range | 0–0.6 MPa |
| Nitrogen Purity | 99% |
| Dew Point | –40 °C (typical, as per standard membrane module specification) |
| Integrated Air Compressor | Yes |
| Filtration Stages | 3-stage (particulate < 0.01 µm, oil aerosol < 0.003 mg/m³) |
| Power Supply | 380 V AC |
| Total Power Consumption | 3200 W |
| Dimensions (W×D×H) | 400 × 300 × 1300 mm |
| Noise Level | ≤62 dB(A) |
| Startup Time | ≤3 min |
| Compliance | CE-marked design |
| compatible with ISO 8573-1 Class 2 | 2:2 air quality requirements for nitrogen feed gas |
| Brand | Anyan |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | AYAN-30LG |
| Output Flow Rate | 30 L/min |
| Output Pressure | 0–0.6 MPa |
| Nitrogen Purity | 99.9% |
| Dew Point | ≤ −40 °C (typical for membrane systems) |
| Separation Principle | Polymeric Membrane Gas Separation |
| Integrated Air Compressor | Yes |
| Filtration Stages | Three-Stage (Particulate < 0.01 µm, Oil & Water < 0.003 mg/m³) |
| Noise Level | ≤ 62 dB(A) |
| Power Supply | 380 V AC |
| Dimensions (W×D×H) | 400 × 300 × 1300 mm |
| Total Power Consumption | 3200 W |
| Brand | Anyan |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Category | Domestic |
| Model | AYAN-35L1 |
| Nitrogen Generation Principle | Membrane Separation |
| Output Flow Rate | 35 L/min |
| Output Pressure | 0–105 psi (adjustable) |
| Nitrogen Purity | 99.9% |
| Dew Point | −40 °C |
| Filtration | Three-stage filtration (particulates < 0.01 µm |
| Integrated Air Compressor | Yes |
| Noise Level | ≤55 dB(A) |
| Startup Time | ≤3 min |
| Display | Real-time nitrogen purity and pressure readout |
| Brand | ANYAN |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | AYAN-500ML |
| Nitrogen Generation Principle | Membrane Separation |
| Output Flow Rate | 500 mL/min |
| Output Pressure Range | 0–0.4 MPa |
| Nitrogen Purity | >99.999% |
| Dew Point | ≤−40 °C (at 0.4 MPa) |
| Pressure Stability | <±0.2% FS |
| Max Power Consumption | 150 W |
| Output Port | 3 mm OD tubing or 1/8" NPT (M8×1 external thread) |
| Water Reservoir Capacity | 1.2 L |
| Water Consumption | ~10 mL/h |
| Feed Water Resistivity Requirement | ≥1 MΩ·cm |
| Input Voltage | AC 230 V, 50/60 Hz |
| Fuse Rating | 250 V / 2 A |
| Operating Ambient | 10–40 °C, RH <85%, non-dusty environment |
| Dimensions (L×W×H) | 400 × 250 × 350 mm |
| Duty Cycle | Continuous operation |
| Brand | Anyan |
|---|---|
| Origin | Zhejiang, China |
| Model | AYAN-5L |
| Nitrogen Generation Principle | Membrane Separation |
| Output Flow Rate | 5 L/min |
| Output Pressure | 0–0.6 MPa |
| Nitrogen Purity | 99% |
| Dew Point | −40 °C |
| Integrated Air Compressor | Yes |
| Filtration Stages | Three-stage |
| Particle Removal Efficiency | <0.01 µm & <0.003 mg/m³ |
| Power Consumption | 1000 W |
| Voltage | 220 V, 50 Hz |
| Dimensions (W×D×H) | 500 × 330 × 710 mm |
| Brand | Anyan |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Category | Domestic Lab Equipment |
| Model | AYAN-5L |
| Pricing | ¥25,000 (excl. VAT) |
| Nitrogen Generation Principle | Polymeric Membrane Separation |
| Output Flow Rate | 5 L/min |
| Output Pressure Range | 0–0.6 MPa |
| Nitrogen Purity | 99% |
| Dew Point | Not specified in source data |
| Power Consumption | 1000 W |
| Input Voltage | 220 V, 50 Hz |
| Dimensions (W×D×H) | 500 × 330 × 710 mm |
| Filtration Stages | Triple-stage (particulate <0.01 µm, oil aerosol <0.003 mg/m³) |
| Integrated Air Compressor | Yes |
| Noise Level | Reduced via suspended acoustic isolation mount |
| Pressure Regulation | Dual independent pressure adjustment system |
| Display | Real-time nitrogen purity indication |
| Brand | Anyan |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Category | Domestic Equipment |
| Model | AYAN-5LG |
| Nitrogen Generation Principle | Hollow-Fiber Membrane Separation |
| Output Flow Rate | 5 L/min |
| Output Pressure | 0–0.6 MPa |
| Nitrogen Purity | 99.9% |
| Dew Point | −45 °C |
| Filtration Stages | Three-Stage Integrated Air Purification |
| Power Consumption | 1000 W |
| Input Voltage | 220 V, 50 Hz |
| Dimensions (W×D×H) | 500 × 330 × 710 mm |
| Brand | Anyan |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | AYAN-5LG Membrane |
| Nitrogen Generation Principle | Membrane Separation |
| Output Flow Rate | 5 L/min |
| Output Pressure Range | 0–0.6 MPa |
| Nitrogen Purity | 99.9% |
| Dew Point | −40 °C |
| Integrated Air Compressor | Yes |
| Filtration Stages | Three-Stage (Particulate < 0.01 µm, Oil & Water < 0.003 mg/m³) |
| Power Consumption | 1000 W |
| Voltage | 220 V, 50 Hz |
| Dimensions (W×D×H) | 500 × 330 × 710 mm |
| Noise Level | ≤55 dB(A) |
| Startup Time | ≤3 min |
| Display | Real-Time Purity Monitoring (Digital LED) |
| Brand | Anyan |
|---|---|
| Origin | Zhejiang, China |
| Model | AYAN-5LG |
| Nitrogen Generation Principle | Membrane Separation |
| Output Flow Rate | 5 L/min |
| Output Pressure Range | 0–0.6 MPa |
| Nitrogen Purity | 99.9% |
| Dew Point | −40 °C |
| Integrated Air Compressor | Yes |
| Filtration Stages | Three-Stage |
| Particle Removal Efficiency | <0.01 µm |
| Oil & Aerosol Removal | <0.003 mg/m³ |
| Power Consumption | 1000 W |
| Voltage | 220 V, 50 Hz |
| Dimensions | 500 × 330 × 710 mm |
| Brand | ANYAN |
|---|---|
| Origin | Zhejiang, China |
| Model | AYAN-60L |
| Nitrogen Production Principle | Pressure Swing Adsorption (PSA) |
| Output Flow Rate | 60 L/min |
| Output Pressure | 0–0.6 MPa (factory-set at 0.5 MPa) |
| Nitrogen Purity | 99% (O₂ ≤ 1%) |
| Dew Point | −40 °C |
| Power Supply | 220 V ±10%, 50 Hz ±5% |
| Max. Power Consumption | 600 W |
| Ambient Operating Conditions | 0–40 °C, RH ≤85%, non-corrosive, low-dust environment |
| Construction Material | Food-grade 304 stainless steel |
| Air Inlet | DN50 |
| Nitrogen Outlet | DN25 |
| Noise Level | ≤65 dB(A) |
| Control System | PLC-based cabinet with real-time monitoring |
| Compliance | Designed for GLP-supporting environments |
| compatible with ISO 8573-1 Class 2 | 2:2 compressed air feed requirements |
| Brand | Anyan |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | AYAN-60LG |
| Nitrogen Generation Principle | Polymeric Membrane Separation |
| Output Flow Rate | 60 L/min |
| Output Pressure Range | 0–0.6 MPa |
| Nitrogen Purity | 99.9% |
| Dew Point | ≤−40 °C (typical, as specified per ISO 8573-1 Class 3.2.2) |
| Integrated Air Compressor | Yes |
| Filtration Stages | Three-stage (particulate <0.01 µm, oil aerosol <0.003 mg/m³) |
| Power Consumption | 3800 W |
| Input Voltage | 380 V AC |
| Dimensions (W×D×H) | 400 × 300 × 1300 mm |
| Noise Level | ≤62 dB(A) |
| Start-up Time | ≤3 min |
| Display | Real-time N₂ purity indicator (electrochemical sensor-based) |
| Brand | Anyan |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Category | Domestic |
| Model | AYAN-60LG |
| Instrument Type | Membrane-Based Nitrogen Generator |
| Nitrogen Production Principle | Imported Korean Hollow-Fiber Membrane Separation |
| Output Flow Rate | 60 L/min |
| Output Pressure | 1 MPa |
| Nitrogen Purity | 99.9% |
| Dew Point | −40 °C (at 1 MPa) |
| Brand | Anyan |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | AYAN-80LG |
| Nitrogen Generation Principle | Pressure Swing Adsorption (PSA) |
| Output Flow Rate | 80 L/min |
| Output Pressure Range | 0–0.4 MPa |
| Nitrogen Purity | 99.9% |
| Dew Point | −40 °C |
| Brand | ANYAN |
|---|---|
| Origin | Zhejiang, China |
| Model | AYAN-B80 |
| Feed Capacity | 2 L |
| Effective Evaporation Area | 0.1 m² |
| Evaporator Internal Diameter | 80 mm |
| Condensation Area | 0.2 m² |
| Collecting Flask Capacity | 2 L |
| Operating Vacuum | ≤1 Pa |
| Heating Temperature Range | Ambient to 300 °C |
| Condensing Temperature | −20 °C |
| Rotational Speed | 300 rpm |
| Motor Power | 200 W |
| 刮板角度 | 45° |
| Cooling System | Integrated dual-stage condenser with refrigerated coolant circulation |
| Brand | Anyan |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Model | AYAN-DA5L |
| Output Flow Rate | 0–5 L/min |
| Output Pressure | 0–0.5 MPa |
| Hydrocarbon Content | < 0.1 ppm (after catalytic oxidation) |
| Dew Point | −45 °C |
| Carbon Filter Replacement Interval | Every 1000 operating hours |
| Desiccant | Indicating silica gel (blue-to-pink transition) |
| Compressor Type | Oil-free diaphragm compressor |
| Gas Storage Tank | Electropolished stainless steel with auto-drain |
| Filtration Stages | Dual-stage particulate + activated carbon + catalytic oxidation + molecular sieve (0.5 µm retention efficiency ≥99.99%) |
| Safety Features | Overpressure protection, thermal overload cutoff, low-pressure startup circuit |
| Brand | Anyan |
|---|---|
| Origin | Zhejiang, China |
| Model | AYAN-DC12S |
| Heating Method | Water Bath |
| Temperature Range | Ambient to 100 °C |
| Temperature Uniformity | ±1 °C |
| Sample Capacity | 12 positions |
| Tube Compatibility | 50 mL or 150 mL vials |
| Gas Flow Control | 0–15 L/min (adjustable per channel) |
| Heating Power | 1000 W |
| Display | 7-inch capacitive touchscreen |
| Control Modes | 5 preset + 50 programmable temperature ramps |
| Preheated Nitrogen Delivery | ~45 °C |
| Sealing System | Dual-sealed observation door with circulating fan |
| Data Logging | Internal storage for operational parameters and run history |
| Brand | ANYAN |
|---|---|
| Origin | Zhejiang, China |
| Model | AYAN-DC16G |
| Heating Method | Dry-block heating |
| Temperature Range | Ambient to 100 °C |
| Temperature Stability | ±1 °C |
| Sample Capacity | 16 positions |
| Tube Diameter Compatibility | 16 mm (interchangeable modules available) |
| Nitrogen Flow Rate | 0–15 L/min (adjustable per channel) |
| Heating Power | 300 W |
| Display | 7-inch LCD touchscreen |
| Programmable Temperature Profiles | Up to 50 segments |
| Timing Range | 0–999 min |
| Pressure Regulation Range | 0–0.8 MPa |
| Independent Gas Control | 16-channel precision regulation |
| Sealing System | Dual-seal insulated door with 4-sided transparent viewing window |
| Integrated Exhaust Fan | Yes |
| Motorized Vertical Adjustment | Yes |
| Sample Access | Drawer-type sliding tray |
| Over-Temperature Protection | Yes |