APKJ
Filter
Showing 1–30 of 38 results
| Brand | APKJ |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | 3AP-CJ-27 |
| High-Temperature Range | +150 °C |
| Low-Temperature Range | −60 °C |
| Thermal Shock Range | −60 °C to +150 °C |
| Temperature Stability | ±2 °C |
| Heating Rate | 3.0 °C/min |
| Cooling Rate | 1.0 °C/min |
| Internal Dimensions (W×H×D) | 300 mm × 300 mm × 300 mm |
| External Dimensions (W×H×D) | 1200 mm × 1660 mm × 1020 mm |
| Construction Material | SUS#304 Stainless Steel (Interior & Exterior) |
| Insulation | High-Density Glass Wool + Polyurethane Foam |
| Test Port | One φ50 mm Access Port (Left Side) |
| Control Interface | Touchscreen LCD with Bilingual (English/Chinese) HMI |
| Programmable Cycles | 1–999 |
| Soak Time per Zone | Up to 999 h 59 min |
| Compliance Standards | IEC 60068-2-14, JIS Z 8702, MIL-STD-202G, CNS 12045 |
| Brand | APKJ |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | AP---HX |
| Pricing | Available Upon Request |
| Brand | APKJ |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | AP-225L-HX |
| Pricing | Upon Request |
| Internal Volume | 225 L |
| Temperature Range | −40 °C to +150 °C (configurable) |
| Temperature Uniformity | ±2 °C |
| Temperature Control Accuracy | ±0.2 °C |
| Humidity Range | 20–98% RH (optional) |
| Humidity Control Accuracy | ±2.5% RH |
| Heating Rate | ~3 °C/min (RT to +150 °C in ~40 min) |
| Cooling Rate | ~1 °C/min (RT to −40 °C in ~65 min) |
| Construction | Interior – Mirror-finish SUS304 stainless steel |
| Refrigeration System | Air-cooled, single-stage or cascade (R404A/R23) with hermetic compressors (Tecumseh or Bitzer) |
| Controller | Programmable PID-based microprocessor controller (standard) |
| Safety Features | Independent over-temperature cutoff, compressor overheat/overcurrent/overload protection, fan thermal protection, low-water alarm (for humidification), audible/visual alarms |
| Interface Options | RS-485, USB data export, optional printer connectivity |
| Compliance | Designed to support ISO 17025-compliant test environments |
| Brand | APKJ |
|---|---|
| Model | AP-CJ-50 / AP-CJ-80 / AP-CJ-100 / AP-CJ-150 / AP-CJ-250 |
| Chamber Type | Three-Zone (Hot Zone / Cold Zone / Test Zone) |
| Temperature Range | +150 °C to –70 °C |
| Preheat Range | RT to +200 °C |
| Precool Range | RT to –70 °C |
| Test Zone Temp. Stability | ±2 °C |
| Transfer Time | ≤10 s |
| Recovery Time | 3–5 min |
| Heating Rate (150 °C) | 30–40 min |
| Cooling Rate (to –55/–65/–75 °C) | 70–120 min |
| Interior Material | SUS304 Stainless Steel |
| Insulation | Rigid Polyurethane Foam + Glass Wool |
| Refrigeration | Cascade System with Dual Compressors (TECUMSEH or Bitzer) |
| Refrigerants | R404A/R507 (High Stage), R23/R508B (Low Stage) |
| Controller | TEMI (Korea) or OYO (Japan) |
| Compliance | Designed for ASTM D5229, IEC 60068-2-14, MIL-STD-810H Method 503.5, JIS Z 8701-2, and GLP-aligned validation protocols |
| Sample Mounting | Static in Test Zone |
| Power Supply | 3-phase 380 VAC ±10%, 50/60 Hz |
| Brand | APKJ |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Manufacturer |
| Product Category | Domestic |
| Model | AP-CJ-10 |
| Pricing | Upon Request |
| Brand | APKJ |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM Manufacturer |
| Model | AP-CJ-10B |
| Price Range | USD 7,000–14,000 (FOB) |
| High-Temperature Range | +150 °C |
| Low-Temperature Range | −60 °C |
| Thermal Shock Range | −60 °C to +150 °C |
| Temperature Stability | ±2 °C |
| Heating Rate | 3.0 °C/min |
| Cooling Rate | 1.0 °C/min |
| Control Interface | 5.7″ TFT Color Touchscreen LCD |
| Refrigeration System | Dual-Stage Cascade Compressor (Water-Cooled) |
| Shock Mode | Air-Path Switching Between Hot/Cold Chambers |
| Test Zone Configuration | Static Sample Placement |
| Max Cycle Count | 9999 |
| Max Dwell Time per Zone | 999 h |
| Defrost Mode | Automatic & Manual |
| Safety Protections | Over-Temp, Over-Current, Compressor High-Pressure, Phase Failure, Water Flow Monitoring |
| Brand | APKJ |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | AP-CJ-150 |
| Internal Dimensions (W×H×D) | 60×50×50 cm |
| External Dimensions (W×H×D) | 180×190×154 cm |
| Preheat Temperature Range | RT to +200 °C |
| Precool Temperature Range | –70 °C |
| Test Temperature Range Options | +150 °C to –40 °C / –55 °C / –65 °C |
| Temperature Stability | ±2 °C |
| Transfer Time (Test Zone ↔ Hot/Cold Zone) | ≤10 s |
| Recovery Time (–40 °C → +150 °C) | ≤5 min |
| Heating Rate (to +150 °C) | 30–40 min |
| Cooling Rate (to –55/–65/–75 °C) | 70–120 min |
| Construction | SUS304 Stainless Steel Interior & Exterior |
| Insulation | Rigid Polyurethane Foam + Glass Wool |
| Refrigeration System | Cascade Type |
| Low-Temp Stage Refrigerant | R23 or R508B |
| High-Temp Stage Refrigerant | R404A or R507 |
| Compressor Options | Tecumseh (hermetic) / Bitzer or Copeland (semi-hermetic) |
| Controller | TEMI (Korea) or OYO (Japan), optional |
| Power Supply | 3φ5w AC 380 V ±10%, 50/60 Hz |
| Total Power Consumption | 28–35–45 kW |
| Approx. Weight | 1300 kg |
| Safety Protections | Overtemperature, overpressure, overcurrent, phase sequence, oil pressure, low-voltage, water flow, and pressure relief protection |
| Compliance | GB/T 2423.1–2008, GB/T 2423.2–2008, GB/T 2423.22–2012, GJB 150.5–1986, GJB 360.7–1987, GJB 367.2–1987, QC/T 17–1992, EIA-364-32, IEC 60068-2-14 |
| Brand | APKJ |
|---|---|
| Model | AP-CJ-225 |
| Type | Three-Zone (Hot/Cold/Test) Thermal Shock Test Chamber |
| Origin | Guangdong, China |
| Manufacturer | APKJ Technology Co., Ltd. |
| Refrigeration System | Cascade-type with dual-stage compressors (TECUMSEH or Bitzer optional) |
| Refrigerants | R404A/R23 or R507/R508B |
| Preheat Range | RT to +200 °C |
| Precool Range | RT to −70 °C |
| Test Temp Range | +150 °C to −40 °C / −55 °C / −65 °C (configurable) |
| Temperature Uniformity | ±2 °C |
| Transfer Time | ≤10 s |
| Recovery Time | 3–5 min |
| Interior Material | SUS304 Stainless Steel |
| Insulation | Rigid Polyurethane Foam + Glass Wool |
| Controller | TEMI (Korea) or OYO (Japan), programmable |
| Compliance | Designed for ASTM D5229, ISO 11359, IEC 60068-2-14, MIL-STD-810G thermal shock protocols |
| [Brand | APKJ |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Product Category | Domestic |
| Model | AP-CJ-5 |
| Pricing | Upon Request |
| Preheating Temperature Range | RT to +200 °C |
| Precooling Temperature Range | RT to −70 °C |
| Test Temperature Ranges | +150 °C ↔ −40 °C, +150 °C ↔ −55 °C, +150 °C ↔ −65 °C |
| Temperature Stability | ±2 °C |
| Transfer Time | ≤10 s |
| Recovery Time | 3–5 min |
| High-Temp Soak Duration | Up to 999 h at +150 °C |
| Low-Temp Soak Duration | Up to 999 h at −40 °C |
| Max Cycles | 9999 |
| Cooling System | Dual-stage cascade refrigeration with water-cooled condenser |
| Control Interface | Touchscreen color LCD HMI with PID auto-tuning |
| Compliance | MIL-STD-810G Method 503.5, GJB 150.5A-2009, GJB 360B-2009 (Method 211), GB/T 2423.22–2012, IEC 60068-2-14, QC/T 17–1992, EIA-364-32] |
| Brand | APKJ |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | AP-CJ-C |
| Temperature Range | +150°C to –65°C |
| Preheat Range | RT to +200°C |
| Precool Range | RT to –70°C |
| Transfer Time | ≤10 s |
| Recovery Time | 3–5 min |
| Temperature Uniformity | ±2°C (per IEC 60068-3-5) |
| Compliance | GB/T 2423.1–2008, GB/T 2423.2–2008, GB/T 2423.22–2012, GJB 150.5–1986, GJB 360.7–1987, GJB 367.2–1987, QC/T 17–1992, EIA-364-32, IEC 60068-2-14 |
| Refrigeration System | Dual-stage cascade refrigeration |
| Low-stage Refrigerant | R23 or R508B |
| High-stage Refrigerant | R404A or R507 |
| Compressor Options | Tecumseh (hermetic), Bitzer or Copeland (semi-hermetic) |
| Interior Dimensions (W×H×D) | 60×40×40 cm |
| Exterior Dimensions (W×H×D) | 180×180×144 cm |
| Safety Protections | Overtemperature/overcooling cutouts (dual independent controllers), leakage circuit breaker (200/220/380 V AC), main supply breaker (400/415 V AC), redundant thermal fuses |
| [Brand | APKJ |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Manufacturer |
| Model | AP-DL |
| Max Test Height | 300–1800 mm |
| Max Drop Weight | 1 kg |
| Height Accuracy | ±2% or ±10 mm |
| Detachment Height | 300 mm |
| Counting Range | 0–999,999 (LCD) |
| Air Supply | ≥0.5 MPa |
| Power | AC 220 V, 50 Hz, 3 A |
| Dimensions (W×D×H) | 720 × 910 × 2500 mm |
| Weight | 150 kg |
| Compliance | JIS C 0044, IEC 60068-2-32] |
| Brand | APKJ |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Manufacturer |
| Country of Origin | China |
| Model | AP-DL |
| Price Range | USD 1,400–2,800 (est.) |
| Drop Height Range | 300–1500 mm |
| Max. Specimen Weight | 60 kg |
| Max. Specimen Dimensions | 200 × 800 × 1000 mm |
| Impact Surface Dimensions | 600 × 1100 × 20 mm |
| Height Accuracy | ±10 mm or ≤2% of set height |
| Drop Orientation | Face, Edge, Corner |
| Structural Configuration | Single-arm, dual-column |
| Actuation | Electromechanical lift & release |
| Height Tracking | Rotary encoder-based |
| Display | Optional digital height indicator |
| Base Plate Angular Tolerance | ≤5° relative to horizontal |
| Safety System | Hydraulic damping buffer |
| Compliance Standard | GB/T 2423.8 |
| Brand | APKJ |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Manufacturer |
| Model | AP-DL-2 |
| Drive System | Electric |
| Drop Method | Free Fall |
| Drop Height Range | 300–1500 mm |
| Height Accuracy | ±10 mm (or ≤2% of set height) |
| Maximum Test Specimen Dimensions | 1000 × 800 × 1000 mm (L×W×H) |
| Drop Platform Area | 1700 × 1400 mm (L×W) |
| Arm Dimensions | 290 × 240 × 8 mm |
| Leveling Tolerance of Drop Surface | <1° |
| Angular Alignment Tolerance (Impact Face vs. Base Plate) | ≤5° |
| Maximum Load Capacity | 80 kg |
| Overall Dimensions | 1700 × 1400 × 2015 mm (L×W×H) |
| Control Box Dimensions | 350 × 350 × 1100 mm (L×W×H) |
| Net Weight | 450 kg |
| Power Supply | 1-phase, AC 380 V, 50 Hz |
| Compliance Standards | ISO 2248, JIS Z0202-87, GB/T 4857.5–1992 |
| Brand | APKJ |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | AP-DW-B |
| Price Range | USD 7,000–14,000 (FOB) |
| Temperature Range | −40 °C to +150 °C |
| Temperature Uniformity | ±0.5 °C |
| Temperature Fluctuation | ±0.5 °C |
| Heating Rate | 1–3 °C/min |
| Cooling Rate | 0.7–1 °C/min |
| Control Precision | ±0.2 °C |
| Internal Volume | 100 L (W50×H50×D40 cm) |
| Construction | SUS304 Stainless Steel Interior & Exterior |
| Insulation | Rigid Polyurethane Foam + Glass Wool |
| Refrigeration | Single-Stage or Cascade System with HFC-404A/R23 Refrigerants |
| Compressor | Hermetic Scroll Compressor (Tecumseh or Bitzer Equivalent) |
| Humidity Control | Optional Capacitive Sensor + PID Algorithm |
| Safety Protections | Over-Temperature Cut-Off, Compressor High-Pressure & Overcurrent Protection, Dry-Run Prevention, Liquid Level Monitoring, Emergency Stop |
| Brand | APKJ |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | AP-GD-1000L |
| Pricing | Upon Request |
| Brand | APKJ |
|---|---|
| Model | AP-GD-150AS |
| Internal Volume | 150 L |
| Temperature Range | −70 °C to +150 °C |
| Temperature Uniformity | ±2 °C |
| Temperature Control Accuracy | ±0.2 °C |
| Heating Rate | ~3 °C/min (RT to 150 °C in ~40 min) |
| Cooling Rate | ~1 °C/min (RT to −70 °C in ~100 min) |
| Inner Chamber Material | SUS304 Mirror-Finish Stainless Steel |
| Refrigerant | R404A/R23 (Honeywell) |
| Compressor | Hermetic or Semi-Hermetic (Tecumseh or Bitzer) |
| Controller | Programmable LCD Touchscreen (100 programs × 1000 segments × 999 cycles) |
| Compliance | Designed for IEC 62133, UN 38.3, GB/T 31467.3, ISO 16750-4, and automotive battery thermal validation protocols |
| Brand | APKJ |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | AP-GD-225A1 |
| Temperature Range | −40 °C to +150 °C |
| Temperature Uniformity | ±0.5 °C |
| Temperature Fluctuation | ±0.5 °C |
| Heating Rate | 1–3 °C/min |
| Cooling Rate | 0.7–1 °C/min |
| Operating Temperature Range (Dust Mode) | RT+5 °C to 60 °C |
| Airflow Velocity | 0–3.5 m/s |
| Sieve Mesh Wire Diameter | 75–100 µm (100–200 mesh) |
| Test Dust | Talcum Powder, 2–4 kg/m³ |
| Dust Blowing Cycle | Programmable Intermittent Control |
| Optional Vacuum System | Available upon request |
| Chamber Internal Dimensions (W×H×D) | 1000 mm × 1000 mm × 1000 mm |
| Dust Retention Mesh Wire Diameter | 50 µm |
| Humidity Control | Capacitive or Dry/Wet Bulb Sensor-Based |
| Controller | Multi-Stage Programmable PID Controller with Fuzzy Logic Algorithm |
| Refrigerant | Eco-Friendly Non-CFC/HFC-Free Refrigerant |
| Brand | APKJ |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | AP-GD-4081 |
| Pricing | Upon Request |
| Internal Dimensions (W×H×D) | 60 × 85 × 80 cm |
| Temperature Range | −40 °C to +150 °C |
| Humidity Range | 20–98% RH |
| Temperature Uniformity | ±2 °C |
| Humidity Uniformity | ±2% RH |
| Temperature Fluctuation | ≤±0.5 °C |
| Humidity Fluctuation | ±2% RH |
| Heating Rate | ≥3 °C/min |
| Cooling Rate | ≥1 °C/min |
| Control System | TEMI880 Programmable Touchscreen Controller (Korean) |
| Refrigerant | R404A/R23 |
| Compressor | Hermetic French Tecumseh or Semi-Hermetic German Bitzer |
| Interior Material | SUS304 Mirror-Finish Stainless Steel |
| Exterior Material | SUS304 Brushed Stainless Steel |
| Insulation | High-Density Polyurethane Foam + Ultra-Fine Glass Wool |
| Air Circulation | Wide-Band Forced Convection (Top-Out/Bottom-In) |
| Standard Ports | One Φ25 mm Test Port |
| Safety Protections | Over-Temperature/Under-Temperature Cut-off, Dry-Run Prevention, Phase Failure Detection, High-Pressure & Overload Protection, Water Shortage Alarm |
| Brand | APKJ |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Origin Category | Domestic |
| Model | AP-GD-800 |
| Internal Volume | 800 L (Customizable Dimensions) |
| Temperature Range | -70 °C to +150 °C |
| Temperature Uniformity | ±2 °C |
| Temperature Control Resolution | 0.01 °C |
| Heating Rate | 3.0 °C/min |
| Refrigeration System | Dual-stage cascade with hermetic Tecumseh (France) compressors |
| Refrigerants | Low-GWP blend — R23/R508B (low-temp stage), R404A/R507 (high-temp stage) |
| Compliance | GB/T 10589–1989, GB/T 10592–1989, GB/T 2423.1–1989 (Test Aa/Ab), GB/T 2423.4–1993 (Test Db), MIL-STD-810D Method 502.2 & 507.2 |
| Brand | APKJ |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | AP-HX |
| Price Range | USD 0–7,200 (FOB) |
| Temperature Uniformity | ±2 °C |
| Heating Rate | ≤60 min (from 25 °C to +150 °C) |
| Cooling Rate | ≤45 min (from 25 °C to −40 °C) |
| Temperature Range | −70 °C to +150 °C (configurable sub-ranges A–G) |
| Humidity Range | 20–98 % RH (optional 10–98 % RH or 5–98 % RH) |
| Temperature Control Accuracy | ±0.1 °C |
| Humidity Control Accuracy | ±1.5 % RH |
| Temperature Fluctuation | ±0.5 °C |
| Resolution | 0.01 °C / 0.1 % RH |
| Internal Volume Options | 60–1000 L |
| Inner Chamber Material | SUS304 stainless steel |
| Insulation | High-density fiberglass + imported PU foam |
| Refrigerant | R134a / R404a / R23 (EU-compliant) |
| Compressor | Original Tecumseh (France) |
| Controller | TIME880 touchscreen HMI (Korean-made, bilingual UI) |
| Key | Brand: APKJ |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Manufacturer |
| Country of Origin | China |
| Model | AP-HX-2 |
| Pricing | Upon Request |
| Brand | APKJ |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | AP-HX-5 |
| Pricing | Available Upon Request |
| Brand | APKJ |
|---|---|
| Origin | Hebei, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | AP-HX-80 |
| Pricing | Available Upon Request |
| Internal Dimensions (D×W×H) | 1000×1000×1000 mm |
| Temperature Range | −70 °C to +150 °C |
| Temperature Uniformity | ≤2 °C (unloaded) |
| Temperature Fluctuation | ±0.5 °C (unloaded) |
| Temperature Deviation | ≤±2 °C |
| Ramp Rate | 0.7–1.0 °C/min (unloaded) |
| Timer Range | 0–9999 h |
| Control Resolution | ±0.1 °C |
| Sensor | PT100 Platinum Resistance Thermometer |
| Heating System | Nickel-Chromium Far-Infrared Heaters |
| Refrigeration System | Hermetic French Tecumseh Compressor |
| Refrigerant | R404A |
| Cooling Method | Forced-Air Condensation |
| Compliance | GB/T 2423.1–2021, GB/T 2423.2–2021, GB/T 10592–2008 |
| Brand | APKJ |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Manufacturer |
| Country of Origin | China |
| Model | AP-HX-80L1 |
| Pricing | Upon Request |
| Brand | APKJ |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | AP-HX-B2 |
| Pricing | Available Upon Request |
| Internal Volume Options | 80 L, 150 L, 408 L, 800 L, 1000 L (custom volumes up to 100 m³ walk-in) |
| Temperature Range | –150 °C to +200 °C |
| Humidity Range | 10–98 % RH (standard: 20–98 % RH) |
| Temp. Uniformity | ±2 °C |
| Temp. Stability | ±0.5 °C |
| Humidity Uniformity | ±2.5 % RH |
| Humidity Stability | ±3 % RH |
| Heating Rate | ≥3 °C/min (up to 5 °C/min typical) |
| Cooling Rate | ≥1 °C/min (up to 5 °C/min typical) |
| Control System | Balanced Temperature & Humidity Control (BTHC) with PID-driven SSR regulation |
| Inner Chamber Material | SUS#304 mirror-finish stainless steel |
| Outer Chamber Material | SUS#304 brushed or powder-coated stainless steel |
| Insulation | Rigid polyurethane foam + glass wool |
| Refrigeration | Hermetic French Tecumseh compressors, eco-friendly refrigerant |
| Controller | TEMI touchscreen HMI (South Korea), integrated with Italian/Danish/Japanese components |
| Safety Protections | Compressor overheat/overcurrent/overpressure, dry-run prevention for heaters/humidifiers, chamber over-temperature, low-water alarm |
| Power Supply | 3-phase 5-wire 380 VAC ±10% or 2-phase 3-wire 220 VAC ±10% |
| Brand | APKJ |
|---|---|
| Model | AP-HX-D1 |
| Type | Mobile Environmental Test Chamber |
| Application | Temperature Cycling, Thermal Shock, Constant/Alternating Humidity Testing |
| Construction | Stainless Steel Interior (SUS304), Cold-Rolled Steel Exterior with Electrostatic Coating |
| Insulation | Rigid Polyurethane Foam or Ultra-Fine Glass Wool |
| Sealing | Imported Silicone Gasket |
| Control System | Korean-Made Touchscreen PID Controller (0.1°C/0.1%RH Resolution), BTHC Balanced Heating/Cooling/Humidifying/Dehumidifying |
| Heating | Stainless Steel Finned Air Heater |
| Humidification | Shallow-Tank Steam Generator |
| Refrigeration | Original Imported Hermetic Compressor, Single-Stage or Cascade Low-Temperature System |
| Air Circulation | Custom Aluminum Impeller Driven by HVAC-Grade Motor |
| Safety Protections | Independent Over-Temperature Cut-off, Compressor Overheat/Overcurrent/Overload Protection, Fan Overheat Protection, Low-Water Alarm, Real-Time Deviation Alarms (High/Low/Out-of-Spec Temp & RH) |
| Data Interface | RS-485, USB Storage Port, Optional Printer Connectivity |
| Compliance | GB 10589, GB 10592, GB 10586, GB 11158, GB/T 5170.2–1996, GB/T 5170.5–1996, GB 2423.1–89, GB 2423.2–89, GB 2423.3–91, GB 2423.4–91, GB 2423.22–87 |
| Certifications | Designed for GLP/GMP-aligned validation workflows |
| Brand | APKJ |
|---|---|
| Model | AP-HX1000 |
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Temperature Range | 0°C to 150°C |
| Temperature Uniformity | ±2°C (unloaded) |
| Temperature Fluctuation | ±0.5°C (unloaded) |
| Humidity Range | 20–98% RH |
| Humidity Deviation | +2 / −3% RH |
| Heating Rate | 1.0–3.0°C/min |
| Cooling Rate | 0.7–1.0°C/min |
| Programmable Capacity | 100 programs × 1000 segments × 999 cycles |
| Time Setting Range | 1–9999 hours |
| Refrigeration System | Dual-stage cascade refrigeration |
| Compressor | Hermetic French Tecumseh |
| Refrigerants | R404A / R23 (eco-friendly) |
| Internal Construction | Spiral copper refrigerant tubing, imported filter-driers, sight glasses, service valves, oil separators, solenoid valves, and liquid receivers |
| Leak Testing | 48-hour pressurized air leak test on entire refrigerant circuit |
| Heating/Cooling Systems | Fully independent |
| Power Consumption | 3.8 kW |
| Internal Chamber Dimensions (D×W×H) | 500×600×500 mm |
| External Dimensions (D×W×H) | 1150×900×1650 mm |
| Controller | Optional 7-inch programmable touchscreen interface with bilingual (EN/CN) UI, real-time curve display, screen lock function, and audit-ready parameter logging |
| Brand | APKJ |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | AP-KF-3.5m |
| Cooling Method | Water-Cooled |
| Temperature Range | RT+10°C to 80°C |
| Humidity Range | 65–98% RH |
| Irradiance (290–800 nm) | 550 W/m² |
| Xenon Lamp Power | 4.5 kW |
| Lamp Lifetime | ≥2000 h |
| Inner Chamber Dimensions (W×H×D) | 950×950×850 mm |
| Sample Exposure Area | 6500 cm² |
| Sample Mounting | Rotating Drum (≤3 rpm ±1 rpm) |
| Distance from Lamp to Sample | 375 mm |
| Black Panel Temperature Control | 65°C ±3°C or 100°C ±3°C (selectable) |
| Spray Cycle | 18 min spray / 102 min dry (adjustable) |
| Dark Cycle | Configurable with elevated humidity and condensation simulation |
| Compliance | ASTM C1442, ASTM D4459, AATCC TM16, ISO 4892-2, GB/T 16422.3 |
| Safety Protections | Door Interlock, Overtemperature, Overcurrent, Leakage Current, Phase Sequence Monitoring |
| Interior Material | Mirror-Finish SUS304 Stainless Steel |
| Exterior Material | Cold-Rolled Steel with Powder Coating or Optional Stainless Steel |
| Filtration System | Imported American Optical Filters (Inner & Outer) |
| Control Interface | Touchscreen HMI with Data Logging Capability |
| Brand | APKJ |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Manufacturer |
| Country of Origin | China |
| Model | AP-KF-4.5m |
| Pricing | Upon Request |
| Brand | APKJ |
|---|---|
| Origin | Guangdong, China |
| Manufacturer | APKJ |
| Model | AP-LY |
| Compliance | IPX4, GB/T 2423.38–1990, GB 4706.32–2004, IEC 60529 |
| Internal Chamber Dimensions | 800 × 800 × 800 mm (D×W×H) |
| Turntable Speed | 1–10 rpm (adjustable) |
| Spray Arm Oscillation Angles | 45°, 90°, 180°, 350° (programmable) |
| Nozzle Diameter | φ0.4 mm |
| Nozzle Spacing | 50 mm |
| Flow Rate per Nozzle | 0.07 L/min ±5% |
| Water Pressure | 400 kPa (static), 80–100 kPa (dynamic spray pressure) |
| Oscillation Frequency | 25 cycles/min |
| Test Duration Range | 1–999,999 min |
| Sample-to-Nozzle Distance | 200 mm |
| Chamber Material | Interior – SUS304 stainless steel |
| Viewing Window | Tempered safety glass |
| Control System | Custom-developed touchscreen HMI (Xinjie brand) |
| Power Supply | 220 VAC, 50 Hz |
| Safety Protections | Overload & short-circuit protection, grounding protection, low-water level alarm with audible alert |