Asphericon
Filter
Showing all 21 results
| Brand | Asphericon |
|---|---|
| Origin | Germany |
| Model | a |
| Wavelength Range | 300–1600 nm |
| Input Beam Diameter (1/e²) | 10 mm |
| Output Beam Diameter (dAiry) | 10 mm |
| Laser-Induced Damage Threshold | 12 J/cm² @ 100 Hz, 6 ns, 532 nm |
| Key | Brand: Asphericon |
|---|---|
| Design Wavelengths | 355 nm / 532 nm / 632 nm / 780 nm / 1064 nm |
| Max Input Aperture | 10.6–14.7 mm |
| Max Output Aperture | 22.5 mm |
| Magnification Options | 1.5× / 1.75× / 2.0× |
| Cascadable Units | up to 5 |
| Diffraction-Limited Performance | individually measured & certified |
| Laser Damage Threshold (coated) | 12 J/cm² @ 100 Hz, 6 ns, 532 nm |
| Material | Fused Silica or BK7 (as specified) |
| Surface Figure Error (RMS) | ≤0.018λ @ 532 nm (single unit), ≤0.040λ @ 532 nm (5-unit cascade) |
| Brand | Asphericon |
|---|---|
| Origin | Germany |
| Model | a |
| Spectral Range | 350–2500 nm |
| Input Beam Diameter (1/e²) | 10 mm ±10% |
| Output Beam Diameter (FWHM) | 15.2–15.7 mm |
| Uniformity | >90% (RMS non-uniformity <10%) |
| Working Distance | ≥300 mm (a |
| Total Length | 89.6–93.6 mm |
| Wavefront Error (RMS) | 0.05λ @ design wavelength |
| Strehl Ratio | 0.9 |
| ISO Edge Steepness | 0.4 |
| Laser-Induced Damage Threshold (LIDT) | 12 J/cm², 100 Hz, 6 ns, 532 nm |
| Coating | Custom high-LIDT AR coatings available on request |
| Brand | asphericon |
|---|---|
| Model | a |
| Component Type | Optical Element |
| Design Wavelength | 780 nm |
| Output Beam Diameter (FWHM) | 15 mm |
| Input Fiber NA Range | 0.07–0.095 |
| Beam Uniformity | >90% |
| Working Distance | up to 2000 mm |
| RMS Wavefront Error | <0.05λ (measured: 0.02λ) |
| Strehl Ratio | >0.9 |
| Compatible Connectors | FC/PC, FC/APC |
| Diffraction-Limited Performance | Yes |
| Brand | Asphericon |
|---|---|
| Origin | Germany |
| Model | TSM25-10-LD-B-632 |
| Thread | M28×0.75 mm |
| Outer Diameter Mount | 30 mm |
| Length | 92.3 mm |
| Input Beam Diameter (1/e²) | 10 mm (±10%) |
| Output Beam FWHM | 15.4 mm |
| Output Aperture | 15.4 mm |
| Stable Beam Profile Range | up to 1500 mm |
| Design Wavelength | 632 nm |
| Spectral Range | 530–800 nm |
| Laser Damage Threshold | 12 J/cm², 100 Hz, 6 ns @ 532 nm |
| Brand | Asphericon |
|---|---|
| Origin | Germany |
| Model | TSM25-10-LD-B-780 |
| Mount Thread | M28×0.75 mm |
| Outer Diameter | 30 mm |
| Length | 92.8 mm |
| Input Beam Diameter (1/e²) | 10 mm (±10%) |
| Output Beam FWHM | 15.4 mm |
| Output Aperture | 15.4 mm |
| Stable Beam Profile Range | up to 1500 mm |
| Design Wavelength | 780 nm |
| Spectral Range | 620–1040 nm |
| Laser Damage Threshold | 12 J/cm² (100 Hz, 6 ns, 532 nm) |
| Brand | Asphericon |
|---|---|
| Material | UV-grade Fused Silica |
| Surface Form Error (RMSi) | ≤0.02 µm |
| Surface Roughness (Rq) | ≤0.5 nm |
| Laser Damage Threshold | 12 J/cm² @ 100 Hz, 6 ns, 532 nm |
| Coating Options | 7 standard AR coatings (X, A, K, B, L, C, M) |
| EFL Tolerance | ≤0.1% |
| Diameter Tolerance | +0/−0.05 mm |
| Center Thickness Tolerance | ±0.05 mm |
| Clear Aperture | ≥90% |
| Compliance | RoHS-compliant |
| Design Wavelengths | 240–1600 nm (model-dependent) |
| Stock Availability | Yes |
| Brand | Asphericon |
|---|---|
| Origin | Germany |
| Model | AFL50-80-P-U |
| Material | Fused Silica |
| Surface Irregularity (RMSi) | < 500 nm |
| Wavefront RMS | < 235 nm |
| Diameter | 50 mm |
| Effective Focal Length (EFL) | 80 mm |
| Numerical Aperture (NA) | 0.29 |
| f/d ratio | 1.6 |
| Working Distance (WD) | 70.6 mm |
| Design Wavelength | 285 nm |
| Scratch-Dig | 20-20 |
| Coating Option | Standard AR (e.g., Coating B: 600–1050 nm, Rₐᵥg ≤ 0.4%) |
| Brand | Asphericon |
|---|---|
| Origin | Germany |
| Model | AHL10-08-P-U |
| Material | S-LAH64 |
| Wavelength | 780 nm |
| Diameter | 10 mm |
| Numerical Aperture | 0.55 |
| Surface Irregularity (RMSi) | ≤0.1 µm |
| EFL Tolerance | ≤0.1% |
| Clear Aperture | ≥90% |
| Scratch-Dig | 60-40 |
| Diameter Tolerance | +0/−0.05 mm |
| Center Thickness Tolerance | ±0.05 mm |
| Laser Induced Damage Threshold | 12 J/cm² @ 100 Hz, 6 ns, 532 nm |
| Coating Options | Standard AR Coatings A (400–600 nm), B (600–1050 nm), C (1000–1600 nm) |
| Brand | Asphericon |
|---|---|
| Origin | Germany |
| Model | ALL12-25-P-U |
| Numerical Aperture (NA) | 0.25 |
| Wavelength Optimization | 780 nm |
| Substrate Material | N-BK7 |
| Diameter | 12.5 mm |
| Effective Focal Length Tolerance | ≤ ±0.1 % |
| Surface Form Error (RMSi) | ≤ 0.1 µm |
| Surface Quality | 60–40 scratch-dig |
| Clear Aperture | ≥ 90 % |
| Coating Options | Standard AR Coatings A (400–600 nm), B (600–1050 nm), C (1000–1600 nm) |
| Laser Induced Damage Threshold (LIDT) | 12 J/cm² @ 100 Hz, 6 ns, 532 nm |
| Mounting | Unmounted (U) |
| Brand | asphericon |
|---|---|
| Origin | Germany |
| Model | ALL50-100-U-U |
| Material | N-BK7 |
| Diameter | 50 mm |
| Effective Focal Length (EFL) | 100 mm |
| f/d Ratio | 2.0 |
| Numerical Aperture (NA) | 0.24 |
| Working Distance (WD) | 93.4 mm |
| Design Wavelength | 780 nm |
| Surface Irregularity (RMSi) | < 100 nm |
| Wavefront RMS | < 51 nm |
| Scratch-Dig | 60–40 |
| Coating | Broadband AR (A/B/C series, optimized for 780 nm) |
| Brand | Asphericon |
|---|---|
| Origin | Germany |
| Model | ASM25-10-C-1064 |
| Thread | M28×0.75 mm |
| Outer Diameter Mount | 30 mm |
| Length | 17.3 mm |
| Input Beam Diameter @1/e² | 10 mm |
| Output Beam Diameter (dAiry) | 10 mm |
| Design Wavelength | 1064 nm |
| Wavelength Range | 1000–1500 nm |
| Laser Damage Threshold | 12 J/cm², 100 Hz, 6 ns @ 532 nm |
| Brand | Asphericon |
|---|---|
| Origin | Germany |
| Model | BAM25-175-B-632 |
| Design Wavelength | 632 nm |
| Expansion Ratio | 1.75× |
| Input Aperture | 12.4 mm |
| Output Aperture | 22.5 mm |
| Thread | M28×0.75 |
| Length | 34.8 mm |
| Diameter | 30 mm |
| Surface Irregularity (RMSi) | < 0.5 µm |
| Laser Damage Threshold (Coated) | 12 J/cm² @ 100 Hz, 6 ns, 532 nm |
| Coating Type | Broadband AR (600–1050 nm, Rₐᵥg ≤ 0.4%, Rₘₐₓ < 1.0%, AOI = 0°) |
| Compliance | RoHS |
| Brand | asphericon |
|---|---|
| Origin | Germany |
| Model | BAM25-200-B-632 |
| Design Wavelength | 632 nm |
| Expansion Ratio | 2.0× |
| Input Aperture | 10.6 mm |
| Output Aperture | 22.5 mm |
| Thread | M28×0.75 |
| Length | 34.8 mm |
| Coating Type | Broadband AR (600–1050 nm, R<1.0% max, R<0.4% avg at 0° AOI) |
| Laser Damage Threshold | 12 J/cm² @ 100 Hz, 6 ns, 532 nm |
| Surface Irregularity (RMSi) | <0.5 µm |
| Compliance | RoHS |
| Brand | Asphericon |
|---|---|
| Model | CHL Series |
| Material | S-LAH64 High-Refractive-Index Optical Glass |
| Surface Irregularity (RMSi) | ≤ 0.5 µm |
| EFL Tolerance | ≤ ±0.1% |
| Clear Aperture | ≥ 90% |
| Standard Coatings | A (400–600 nm), B (600–1050 nm), C (1000–1600 nm) |
| Laser Damage Threshold | 12 J/cm² @ 100 Hz, 6 ns, 532 nm |
| Conformance | ISO 10110-5 (Surface Form Tolerance) |
| Brand | Asphericon |
|---|---|
| Origin | Germany |
| Model | CHL10-08-P |
| Material | S-LAH64 |
| Clear Aperture | 10 × 10 mm |
| Numerical Aperture (NA) | 0.54 |
| Design Wavelength | 780 nm |
| Coating | AR for 780 nm |
| Surface Figure Accuracy (RMS) | < λ/20 @ 633 nm |
| Surface Roughness (Ra) | < 5 Å |
| Focal Length (Tangential) | 8.0 mm |
| Focal Length (Sagittal) | ∞ (Cylindrical Geometry) |
| Damage Threshold | > 5 J/cm² @ 780 nm, 10 ns, 10 Hz |
| Brand | Asphericon |
|---|---|
| Model | S-LAH64 |
| Material | S-LAH64 optical glass |
| Surface Irregularity (RMSi) | ≤ 0.5 µm |
| EFL Tolerance | ≤ 0.1% |
| Diameter Tolerance | +0/−0.05 mm |
| Center Thickness Tolerance | ±0.05 mm |
| Clear Aperture | ≥90% |
| Standard AR Coatings | A (400–600 nm), B (600–1050 nm), C (1000–1600 nm) |
| Laser Damage Threshold | 12 J/cm² @ 100 Hz, 6 ns, 532 nm |
| Brand | Asphericon |
|---|---|
| Origin | Germany |
| Model | SQM25-10-A-532 |
| Thread | M28×0.75 mm |
| Outer Diameter Mount | 30 mm |
| Length | 17.3 mm |
| Input Beam Diameter @1/e² | 10 mm |
| Output Beam Diameter (FWHM) | 10 mm |
| Design Wavelength | 532 nm |
| Operating Wavelength Range | 500–620 nm |
| Laser Damage Threshold | 12 J/cm², 100 Hz, 6 ns @ 532 nm |
| Brand | Asphericon |
|---|---|
| Model | StockOptics Axicon |
| Type | Precision Fused Silica Axicon (Conical Lens) |
| Material | Fused Silica |
| Surface Figure (RMSi) | ≤ 0.07 µm |
| Surface Quality | 40–20 scratch-dig |
| Diameter Tolerance | +0/−0.1 mm |
| Center Thickness Tolerance | ±0.1 mm |
| Clear Aperture | ≥90% |
| Standard AR Coatings | A (400–600 nm), B (600–1050 nm), C (1000–1600 nm), X (240–380 nm) |
| Laser Damage Threshold | 12 J/cm² @ 100 Hz, 6 ns, 532 nm |
| Brand | asphericon |
|---|---|
| Origin | Germany |
| Model | UAM25-28-C-MII |
| Thread Type | Female/Female M28×0.75 |
| Length | 10.3 mm |
| Outer Diameter | 30 mm |
| Clear Aperture | 24.5 mm |
| Component Category | Optical Mounting Adapter |
| Brand | Asphericon |
|---|---|
| Origin | Germany |
| Model | XFL25-005-U |
| Material | Fused Silica |
| Design Wavelength | 780 nm |
| Apex Angle | 0.5° |
| Component Type | Optical Element |
| Coating | AR-Coated for 780 nm (Standard) |
| Surface Quality | 20–10 Scratch-Dig |
| Wavefront Error | λ/10 @ 633 nm (typ.) |
| Clear Aperture | ≥90% of Diameter |