ATS
Filter
Showing all 30 results
| Brand | ATS |
|---|---|
| Origin | Switzerland |
| Model | ATS 200S |
| Detection Elements | Na, K, Li, Ca (standard) |
| Measurement Range | Na/K/Li/Ca: 0–200 ppm |
| Ba | 50–1000 ppm |
| Units | ppm, mmol/L, mEq/L |
| Sensitivity | 0.4 ppm (Na, K) |
| Detection Limit | 0.2 ppm (Na, K) |
| Linearity | Natural logarithmic linearity (R² > 0.999 over full range) |
| Repeatability | ≤1% CV (n=10) |
| Drift | ≤1% over 30 min |
| Calibration | One-touch auto-zero and multi-point calibration |
| Operating Temperature | 15–36 °C |
| Relative Humidity | ≤85% RH (non-condensing) |
| Dimensions (Analyzer) | 320 × 400 × 400 mm (L×W×H) |
| Net Weight (Analyzer) | 9 kg |
| Air Compressor Dimensions | 340 × 250 × 350 mm |
| Net Weight (Compressor) | 6 kg |
| Compliance | CE, RoHS, ISO/IEC 17025-compatible operation |
| Software Interface | USB 2.0, RS-232, optional Ethernet module |
| Brand | ATS |
|---|---|
| Origin | Switzerland |
| Model | 300GM |
| Spectral Dispersion | Grating and Interference Filters |
| Slit Width (Spectral Bandpass) | 1.5 nm |
| Resolution | 1 nm |
| Sensitivity | 200:1 (Signal-to-Noise Ratio) |
| Wavelength Accuracy | ±2 nm |
| Detection Range | 1–800 ppm U |
| Precision | ≤1% CV at 100 ppb U |
| Measurement Cycle Time | 5 s |
| Display | Backlit LCD/LED |
| Interface | RS-232, USB 2.0 |
| Power Supply | ATS/37009: 230 VAC, 50/60 Hz |
| ATS/37010 | 110 VAC, 60 Hz |
| Dimensions | 420 × 280 × 380 mm (L×W×H) |
| Net Weight | 9 kg |
| Brand | ATS |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Region Classification | Domestic (China) |
| Model | AE-o |
| Pricing | Upon Request |
| Carrier Type | Lipid Nanoparticle (LNP) |
| Brand | ATS |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | AE001 |
| Price Range | USD 4,200 – 11,200 (FOB) |
| Vesicle Type | Liposomes |
| Sample Volume | 2–800 mL |
| Operating Pressure | 0–1000 psi |
| Final Particle Size | 50–1000 nm |
| Filter Diameter Options | 25 mm / 47 mm / 90 mm |
| Temperature Control Range | 5–80 °C |
| Wetted Materials | 316L Stainless Steel, FDA-Certified Elastomers (O-rings, gaskets), Electropolished Surfaces (Ra ≤ 1.5 µm) |
| Compliance | GMP-Compatible Design, Cleanroom-Ready (ISO Class 5–7) |
| Brand | ATS |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | AH-1500 |
| Instrument Type | High-Pressure Homogenizer |
| Maximum Design Pressure | 2000 bar |
| Maximum Operating Pressure | 1800 bar |
| Viscosity Limit | < 2000 cP |
| Flow Rate | 25 mL–15 L/h |
| Maximum Feed Particle Size | < 500 µm |
| Maximum Feed Temperature | < 90 °C |
| Dimensions (W×H×L) | 440 × 410 × 800 mm |
| Weight | 110 kg |
| Brand | ATS |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | AH-1500 |
| Instrument Type | High-Pressure Homogenizer |
| Dimensions (W×D×H) | 440 × 800 × 410 mm |
| Processing Volume Range | 50–15,000 mL |
| Maximum Operating Pressure | 1500 bar (22,500 psi) |
| Optional Peak Pressure | 1800 bar (27,000 psi) |
| Motor Power | 1.5 kW (220 V, 50 Hz) |
| Throughput | Up to 15 L/h |
| Minimum Sample Volume | 25 mL |
| In-Line Cooling System | Yes, maintains sample temperature <20 °C |
| Wetted Materials | ASTM A276 Type 316L stainless steel |
| Cell Disruption Efficiency | >95% for E. coli, >90% for yeast |
| Particle Size Reduction | Sub-100 nm after single-pass homogenization |
| Compliance | CE-marked, GMP-compliant design |
| Weight | 110 kg |
| Brand | ATS |
|---|---|
| Origin | Canada |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Imported Instrument |
| Model | AH-1500 |
| Instrument Type | High-Pressure Cell Disruptor |
| Max Operating Pressure | 1500 bar (22,500 psi) |
| Optional Overpressure Capability | 1800 bar (27,000 psi) |
| Flow Rate | 15 L/h |
| Minimum Sample Volume | 25 mL |
| In-Line Cooling System | Integrated, maintains sample temperature < 20 °C |
| Contact Wetted Materials | ASTM A240 316L stainless steel |
| Motor Power | 2.2 kW, 380 V / 50 Hz |
| Weight | 110 kg |
| Compliance | CE-marked, GMP-compliant design |
| Particle Size Output | < 100 nm (after single-pass homogenization) |
| Disruption Efficiency | >95% for *E. coli*, >90% for yeast |
| Brand | ATS |
|---|---|
| Origin | Canada |
| Model | AH-1500 |
| Instrument Type | High-Pressure Cell Disruptor |
| Operating Pressure | 1500 bar (22,500 psi), up to 1800 bar (27,000 psi) |
| Motor Power | 2.2 kW, 380 V / 50 Hz |
| Throughput | 15 L/h |
| Minimum Sample Volume | 25 mL |
| In-Line Cooling System | Integrated, maintains sample temperature < 20 °C |
| Wetted Materials | 316L stainless steel |
| Compliance | CE-certified, GMP-compliant design |
| Particle Size Reduction | < 100 nm |
| Cell Disruption Efficiency | >95% for E. coli, >90% for yeast |
| Weight | 110 kg |
| Brand | ATS |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Manufacture | China |
| Model | AH-1500 |
| Instrument Type | High-Pressure Homogenizer |
| Dimensions (W×D×H) | 795×450×490 mm |
| Net Weight | 140 kg |
| Power Rating | 1.5 kW |
| Maximum Design Pressure | 1800 bar |
| Maximum Operating Pressure | 1500 bar |
| Flow Rate Range | 5–15 L/h |
| Minimum Sample Volume | 25 mL |
| Temperature Control Range | 5–10 °C |
| Display | Integrated Digital Interface with Overpressure Protection |
| Structural Design | Modular, Benchtop-Compatible Architecture |
| Compliance | Designed to Support GLP-compliant workflows and ISO 22442-1 (biological safety) considerations for lab-scale bioprocessing |
| Brand | ATS |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | High-Pressure Homogenizer |
| Model | AH-Basic |
| Dimensions (W×D×H) | 500 × 800 × 500 mm |
| Processing Volume Range | 25–10,000 mL |
| Maximum Operating Pressure | 1500 bar |
| Motor Power | 2.2 kW |
| Inlet Particle Size Limit | < 500 µm |
| Throughput | 10 L/h |
| Residual Volume | 0 mL |
| Weight | 110 kg |
| Contact Material | 316L Stainless Steel |
| Optional Components | Ceramic Homogenizing Valve, Secondary Homogenization Module, Cooling Coil |
| Compliance | CE Certified, GMP-Compliant Design |
| Brand | ATS |
|---|---|
| Origin | Canada |
| Model | AH-D150 |
| Instrument Type | High-Pressure Homogenizer |
| Dimensions (W×D×H) | 440 × 800 × 410 mm |
| Processing Capacity | 5–15 L/h |
| Minimum Sample Volume | 15 mL |
| Maximum Design Pressure | 2000 bar |
| Maximum Operating Pressure | 1500 bar |
| Flow Control | Variable-Frequency Drive (VFD) with Adjustable Flow Rate |
| Pressure Sensing | Digital Pressure Transducer, 0–2000 bar Range, ±10 bar Accuracy |
| Integrated Cooling System | Yes |
| Overpressure Protection | Programmable Safety Cut-off |
| Residual Volume | Near-Zero via Integrated Exhaust Valve |
| Power Supply | 220 V AC, 1.5 kW |
| Certification | CE Compliant (EU Machinery Directive 2006/42/EC & EMC Directive 2014/30/EU) |
| Brand | ATS |
|---|---|
| Origin | Jiangsu, China |
| Model | AH-D400 |
| Instrument Type | High-Pressure Homogenizer |
| Dimensions (W×D×H) | 440 × 800 × 410 mm |
| Processing Capacity | 30–40 L/h |
| Minimum Sample Volume | 60 mL |
| Maximum Design Pressure | 2000 bar |
| Maximum Operating Pressure | 1500 bar |
| Flow Control | Variable-Frequency Drive (VFD) |
| Pressure Sensor | Digital display, 0–2000 bar range, ±10 bar accuracy |
| Cooling System | Integrated heat exchanger |
| Safety Features | Programmable overpressure shutdown, automatic exhaust valve for zero sample residue |
| Power Supply | 380 V AC, 5.5 kW |
| Certification | CE compliant |
| Footprint | Floor-standing with casters |
| Brand | ATS |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | High-Pressure Homogenizer |
| Model | AH-NANO |
| Dimensions (W×D×H) | 440 × 800 × 410 mm |
| Processing Capacity | 15–10,000 mL/h |
| Maximum Design Pressure | 2000 bar |
| Maximum Operating Pressure | 1800 bar |
| Viscosity Limit | < 2000 cP |
| Feed Particle Size | < 500 µm |
| Feed Temperature | < 90 °C |
| Weight | 110 kg |
| Cooling Module | Integrated chiller (5–10 °C operational range) |
| Valve Configuration | Dual-stage adjustable homogenizing valve |
| Valve Materials | Ceramic or hardened alloy options |
| Pressure Monitoring | Digital pressure display with electronic overpressure protection |
| Structural Design | Modular, benchtop-integrated architecture |
| Compliance | CE-certified per EU Machinery Directive 2006/42/EC and Low Voltage Directive 2014/35/EU |
| Brand | ATS |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Manufacture | China |
| Model | AH-NANO |
| Instrument Type | High-Pressure Homogenizer |
| Dimensions (W×D×H) | 795 × 450 × 490 mm |
| Net Weight | 140 kg |
| Power Supply | 1.5 kW |
| Maximum Operating Pressure | 1800 bar |
| Flow Rate Range | 15 mL (batch mode) to 10 L/h (continuous mode) |
| Temperature Control Range | 5–10 °C (integrated chiller module) |
| Homogenization Valve Configuration | Dual-stage, interchangeable ceramic or hardened alloy valves |
| Pressure Display | Digital LED gauge with electronic overpressure protection |
| Brand | ATS |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | AH-PILOT |
| Instrument Type | High-Pressure Homogenizer |
| Dimensions (W×D×H) | 900 × 630 × 920 mm |
| Processing Capacity | 50 mL – 40 L/h |
| Maximum Design Pressure | 1800 bar |
| Maximum Operating Pressure | 1500 bar |
| Motor Power | 5.5 kW |
| Integrated Temperature Control Range | 5–10 °C |
| Net Weight | 249 kg |
| Brand | ATS |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer | ATS (Producer) |
| Type | High-Pressure Homogenizer |
| Model | AH-PILOT |
| Dimensions (W×D×H) | 500×800×500 mm |
| Processing Capacity | 200–200,000 mL per batch |
| Max Operating Pressure | 1500 bar |
| Feed Flow Rate | 15–40 L/h |
| Max Inlet Viscosity | < 2000 cP |
| Max Inlet Particle Size | < 500 µm |
| Temperature Control | On-Position Cooling (≤20 °C) |
| Motor | 5.5 kW, 3-Phase, 50 Hz, IP55, Class F Insulation |
| Lubrication | Solid Grease |
| Compliance | CE Certified, GMP-Compliant Design |
| Brand | ATS |
|---|---|
| Origin | Canada |
| Model | AH1500 |
| Max Operating Pressure | 1500 bar (150 MPa / 22,500 psi) |
| Max Design Pressure | 1800 bar (180 MPa / 27,000 psi) |
| Flow Rate | 5–15 L/h (continuously adjustable) |
| Minimum Sample Volume | 25 mL |
| Motor Power | 2.2 kW / 380 V / 50 Hz |
| Dimensions (W×H×L) | 440 × 410 × 800 mm |
| Weight | 110 kg |
| Cooling | Integrated jacketed homogenization module with external chiller interface |
| Control | Digital pressure display (±10 bar resolution), overpressure protection, auto-circuit cutoff |
| Compliance | Designed for GMP-compliant SIP/CIP operation |
| Power Supply | Three-phase electrical only — no compressed air or water required |
| Brand | ATS |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Equipment Type | High-Pressure Homogenizer |
| Model | AH22-100 |
| Flow Rate | 500–600 L/h |
| Maximum Operating Pressure | 1000 bar |
| Motor Power | 18.5 kW |
| Compliance | CE Certified |
| Application Scope | Lab-scale to Pilot-scale Processing |
| Sample Compatibility | Suspensions, Emulsions, Cell Lysates, Nanosuspensions, Liposomes, Vaccine Adjuvants |
| Brand | ATS |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | AH22-100 |
| Instrument Type | High-Pressure Homogenizer |
| Dimensions (W×D×H) | 800 × 530 × 740 mm |
| Processing Capacity | 10–500 L per batch |
| Maximum Operating Pressure | 1000 bar |
| Flow Rate | Up to 500 L/h (variable via frequency converter) |
| Cooling | Integrated in-line cooler + external chiller |
| Material of Construction | 316L stainless steel housing |
| Max Continuous Operating Temperature | 90°C |
| Compliance | ISO 9001 certified |
| Cleaning/Sterilization | CIP (Clean-in-Place) and SIP (Sterilize-in-Place) capable |
| Brand | ATS |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Region Category | Domestic (China) |
| Model | AMH-MINI |
| Pricing | Upon Request |
| Operating Pressure | 0–2200 bar |
| Throughput | 3–5 L/h |
| Minimum Sample Volume | 7 mL |
| Voltage | 380 V, 3-phase 4-wire |
| Power Consumption | 2 kW |
| Interaction Chamber Configuration | 300 µm Diamond Y/Z-Type Primary Chamber + 100 µm Diamond Secondary Chamber |
| Drive System | Servo-Driven Electro-Cylinder |
| Control System | Siemens PLC + Emerson Servo Motion Control |
| Dimensions (W×D×H) | 709 × 419 × 345 mm |
| Weight | 50 kg |
| Brand | ATS |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | AMH-NANO |
| Price | Upon Request |
| Operating Pressure | 0–2200 bar |
| Flow Rate | 5–10 L/h |
| Minimum Sample Volume | 10 mL |
| Voltage | 380 V, 3-phase 4-wire |
| Power | 2.5 kW |
| Interaction Chamber Configuration | 300 µm Diamond Y/Z-Type Primary Chamber + 100 µm Diamond Secondary Chamber |
| Drive System | Servo Motor–Driven Electro-Hydraulic Cylinder |
| Control System | Siemens PLC + Emerson Servo Motion Control |
| Dimensions (W×D×H) | 950 × 460 × 360 mm |
| Weight | 50 kg |
| Brand | ATS |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | AMH-NANO |
| Instrument Type | Microfluidic Homogenizer |
| Dimensions (W×D×H) | 986×442×385 mm |
| Throughput | 5–10 L/h |
| Operating Pressure | 0–2200 bar |
| Minimum Sample Volume | 10 mL |
| Power Supply | 380 V AC, 3-phase 4-wire |
| Power Consumption | 2.5 kW |
| Chamber Configuration | 300 µm Diamond Fixed-Geometry Interaction Chamber (pre-chamber) + 100 µm Diamond Y/Z-Type Interaction Chamber (main chamber) |
| Drive System | Servo-electric direct-drive cylinder |
| Control System | Siemens PLC + Emerson servo motion control |
| Weight | 50 kg |
| Brand | ATS |
|---|---|
| Origin | Switzerland |
| Model | ATS 200S/40998 |
| Measurement Principle | Atomic Emission Spectrometry (Flame Photometry) |
| Elements Measured (Standard) | Na, K, Ca, Mg |
| Optional Channels | Ba or custom single-element channel |
| Measurement Units | ppm, mmol/L, mEq/L |
| Linear Range | Na/K/Ca 0–200 ppm |
| Detection Limit | 0.2 ppm (Na, K) |
| Sensitivity | 0.4 ppm (Na, K) |
| Precision | ≤1% CV (n=10) |
| Drift | ≤1% over 30 min |
| Fuel Gases | Butane, Propane, LPG |
| Air Supply | Oil-free, water-free, particle-free compressed air with buffer tank |
| Optical Design | Fixed interference filters (non-movable) |
| Calibration | Automatic zeroing + single-point memory calibration |
| Software | ATS MiniSoftWin™ (GLP-compliant reporting, multi-point calibration curve generation, method/data archiving, ISO/IEC 17025 report templates) |
| Brand | ATS |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | AH-BASIC 30 |
| Instrument Type | High-Pressure Homogenizer |
| Dimensions (W×D×H) | 900 × 530 × 490 mm |
| Processing Capacity | 40 mL – 30 L/h |
| Maximum Design Pressure | 2000 bar |
| Maximum Operating Pressure | 1000 bar |
| Power Rating | 2.2 kW |
| Net Weight | 174 kg |
| Integrated Temperature Control Range | 5–10 °C |
| Brand | ATS |
|---|---|
| Origin | Canada |
| Manufacturer | ATS (Producer) |
| Product Type | Imported |
| Model | NF-1 |
| Sample Volume | 0.1–1 mL |
| Membrane Pore Sizes Available | 50, 100, 200, 400, 800, 1000 nm |
| Included Components | 2 × 1000 µL glass syringes, 1 extrusion module, 20 membranes (200 nm & 400 nm standard) |
| Temperature Compatibility | Water-bath compatible (ambient to 60 °C) |
| Residual Volume | ≤1 µL per cycle |
| Weight | <2 kg |
| Optional Upgrades | Mechanical stabilization base, nitrogen-driven pressure control system with adjustable pressure (0.1–6 bar), programmable cycle count and dwell time |
| Brand | ATS |
|---|---|
| Origin | Singapore |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Kerr Microscope |
| Price Range | USD 68,000 – 136,000 |
| Magnetic Field | Up to 1.2 T (perpendicular), up to 0.8 T (in-plane) |
| Optical Resolution | Sub-micron (dependent on objective lens) |
| Wavelength Range | 405–1550 nm (configurable) |
| Imaging Frame Rate | Up to 100 fps (full FOV), real-time video acquisition |
| Sample Stage | Motorized XYZ + tilt, vacuum-compatible option available |
| Environmental Control | Temperature-stabilized optical platform, RH < 60 % recommended |
| Power Supply | 220 V, 50 Hz |
| Brand | ATS |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | LF-1 Pneumatic Stand |
| Carrier Type | Liposomes |
| Construction Material | Anodized Aluminum Alloy |
| Actuation Method | Pneumatically Driven Linear Force Application |
| Compatibility | Designed exclusively for ATS LF-1 Liposome Extrusion Devices |
| Brand | ATS |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | NANOJ EX5 |
| Price Range | USD 7,000 – 140,000 (FOB) |
| Compatible Vesicle Type | Liposomes |
| Standard Filter Pore Size | 100 nm |
| Optional Pore Sizes | 50, 200, 400, 800 nm |
| Brand | ATS |
|---|---|
| Origin | Canada |
| Manufacturer | ATS (Original Equipment Manufacturer) |
| Product Type | Imported |
| Model | H10 |
| Instrument Category | High-Shear Cell Disruptor |
| Motor | German-sourced, industrial-grade |
| Bearing | SKF |
| Power | 0.5 kW |
| Voltage | 220 V, 50 Hz |
| Speed Range | 10,000–28,000 rpm (7-step infinitely variable control) |
| Tip Linear Velocity | up to 28.5 m/s |
| Net Weight | 9 kg |
| Batch Volume | 100–5,000 mL (tested in water |
| Protection Rating | IP55 |
| Insulation Class | F |
| Explosion-Proof | No |
| Rotor/Stator Material | Stainless Steel SUS304 or optional SUS316L |
| Brand | ATS |
|---|---|
| Origin | Canada |
| Manufacturer Type | Direct Manufacturer |
| Origin Category | Imported |
| Model | NANOJ-H10 |
| Instrument Type | High-Pressure Rotor-Stator Homogenizer |
| Dimensions (W×D×H) | 280 × 450 × 260 mm |
| Processing Volume Range | 100–5000 mL |
| Input Power | 500 W |
| Output Power | 320 W |
| Power Supply | 220 V / 50 Hz |
| Speed Range | 10,000–28,000 rpm |