ATSEVA
Filter
Showing all 9 results
| Brand | ATSEVA |
|---|---|
| Origin | Russia |
| Model | AA-20DD |
| Pulse Duration Range | 20 fs – 6 ps |
| Wavelength Range | 450–3200 nm |
| Input Repetition Rate | >10 Hz |
| Sensitivity | ≥100 mW² |
| Time Resolution | 0.09–1.22 fs |
| Detector Options | Up to 3 interchangeable photodetectors |
| Input Configuration | Free-space and optional fiber-coupled |
| Compliance | Compatible with ISO/IEC 17025-aligned calibration workflows, supports GLP/GMP-relevant traceability via timestamped measurement logs |
| Brand | ATSEVA |
|---|---|
| Origin | Russia |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported |
| Model | APC Femtosecond Pulse Compressor |
| Core Component | Prism-Based Dispersion Compensation Unit |
| Wavelength Range | 700–900 nm (customizable) |
| GVD Tuning Range @ 800 nm | +16,500 to −13,800 fs² (APC Pro DF) |
| Transmission | >90% @ 800 nm |
| Beam Diameter | Up to 4 mm |
| Polarization | Linear, horizontal (vertical optional) |
| Prism Materials | Fused Silica & Dense Flint Glass |
| Dimensions (APC Pro DF) | 410 × 324 × 186 mm |
| Compliance | Designed for ultrafast laser systems compliant with ISO 11146 (laser beam parameters) and IEC 60825-1 (laser safety) |
| Key | Brand: ATSEVA |
|---|---|
| Origin | Russia |
| Product Type | Faraday Isolator / Rotator |
| Core Material | TGG (Terbium Gallium Garnet) or Terbium-Doped Glass |
| Peak Isolation | >38 dB (up to >60 dB for dual-stage) |
| Transmission | >90% (up to 98%) |
| Spectral Range | 400–1250 nm (model-dependent) |
| Aperture | 2–15 mm (customizable) |
| Damage Threshold | 1 J/cm² @ 10 ns (isolators), 5 J/cm² @ 160 ns (rotators) |
| Compliance | Designed for alignment with ISO 10110 optical surface specifications and RoHS-compliant packaging |
| Software Interface | None (passive, free-space optical component) |
| Mounting | Standard SM1 (1.035"-40) or custom kinematic mounts available |
| Brand | ATSEVA |
|---|---|
| Origin | Russia |
| Model | IRA-0.45-3 |
| Wavelength Range | 450 nm – 11 µm |
| Pulse Duration Range | 50 fs – 250 ps |
| Input Pulse Energy (typ.) | >1 nJ (50 fs–1 ps, thin NL crystal) / >3 nJ (1–250 ps, thick NL crystal) |
| Max. Avg. Input Power | 1 W |
| Repetition Rate | 10 Hz – 100 MHz |
| Polarization | Linear, horizontal |
| Delay Line Time Resolution | 8.3 fs |
| Full Scan Range | 850 ps |
| Interface | USB |
| Software | Windows-based acquisition & analysis suite |
| Dimensions (Optical Unit) | 450 × 250 × 210 mm |
| Dimensions (Control Unit) | 250 × 180 × 90 mm |
| Power Supply | 110/220 V, 50/60 Hz ±10% |
| Brand | ATSEVA |
|---|---|
| Origin | Russia |
| Model | OA |
| Dynamic Attenuation Range | >10² |
| Input Pulse Duration | <50 fs (OAFP), >50 fs (OAGP), >70 fs (OABS) |
| Center Wavelength Options | 343–350 nm, 450–1600 nm (configurable), typical: 515 nm / 800 nm / 1030 nm |
| Bandwidth | 5% (OAFP), 10–12% (OAGP/OABS) of center wavelength |
| Transmission | >92% (OAFP), >90% (OAGP), >85% (OABS) |
| Clear Aperture | <10 mm (OAFP/OAGP-10/OABS-9), <6 mm (OAGP-6), <15 mm (OABS-15) |
| Beam Walk-off | <40 mm (OAFP), <1 mrad (OAGP/OABS) |
| Damage Threshold | 10 J/cm² (OAFP/OAGP-10/OABS-15), 5 J/cm² (OAGP-6) |
| Drive Type | Manual (-M), Manual with Side Knob (-MK), or Stepper Motor–Driven USB-Controlled (-S), step resolution: 0.1% per step |
| Spectral Range | 250–2000 nm |
| Polarization-Based Attenuation Principle | Rotating Waveplate + Polarizer Architecture |
| Brand | ATSEVA |
|---|---|
| Model | OCV-6300F |
| Type | Optical Mechanical Chopper |
| Frequency Range | 7–6300 Hz (dependent on chopper blade configuration) |
| Blade Options | 2-, 10-, 30-, 60-, and 100-slot |
| Sync Output | +5 V, 50 Ω TTL-compatible |
| Frequency Accuracy | ±1 Hz |
| Power Supply | AC 100–230 V, 50/60 Hz → DC 12 V, 0.35 A adapter |
| Power Consumption | 4 W |
| Dimensions (OCV-6300F) | 87 × 104 × 148 mm (W × L × H) |
| Integrated Frequency Counter | Yes |
| Compliance | CE-marked, RoHS-compliant |
| Operating Environment | 15–35 °C, <80% RH non-condensing |
| Brand | ATSEVA |
|---|---|
| Origin | Russia |
| Model | OG-B/F |
| Core Components | Pockels Cell, High-Voltage Gate Driver, Synchronization & Delay Module |
| Wavelength Ranges | 340–1280 nm (OG-F), 200–2200 nm (OG-B), 1000–2700 nm (OG-B-R/K) |
| Max Repetition Rate | 1 MHz (OG-B-R/K), 100 kHz (OG-B), 1 kHz (OG-F) |
| Minimum Repetition Rate | Single-shot |
| Aperture | Up to 20 mm (OG-B), 6 mm (OG-F), 3.5 mm (OG-B-R/K) |
| HV Gate Pulse Width (10% level) | 3 ns (OG-F), 8 ns (OG-B), 8 ns (OG-B-R/K) |
| Rise Time (10–90%) | 700 ps (OG-F), 3.5 ns (OG-B/OG-B-R/K) |
| Contrast Ratio | >1500:1 (OG-F), >700:1 (OG-B), >800:1 (OG-B-R/K) |
| Pockels Cell Voltage | up to 10 kV (OG-F), up to 4 kV (OG-B), up to 3 kV (OG-B-R/K) |
| Transmission | >85% (standard GT prism + PC), >98% (PC only) |
| Trigger Options | Internal/External, Optical/Electrical, Edge/Level/Burst Mode |
| Channel Delay Range | 0–10 µs (OG-F), 0–1 µs (OG-B/OG-B-R/K), extendable per request |
| Cooling | Passive ≤3 kHz |
| Brand | ATSEVA |
|---|---|
| Model | SP |
| Type | Spectral Phase Interferometry for Direct Electric-field Reconstruction Instrument |
| Origin | Russia |
| Import Status | Imported |
| Interface | USB 2.0 |
| Operating Mode | Single-shot & Real-time |
| Input Polarization | Linear, Horizontal |
| Dimensions (w×d×h) | 361 × 210 × 145 mm (SP-800-5), 385 × 295 × 125 mm (SP-800-10 & SP-1000-20) |
| Spectral Range Options | 550–1050 nm |
| Transform-Limited Pulse Width Coverage | 5–12 fs to 80–320 fs (model-dependent) |
| Sensitivity | ≥1 µJ per pulse (single-shot mode) |
| Detection | Dual-channel CCD spectrometer integrated |
| Data Processing | Linear, non-iterative Fourier-domain reconstruction algorithm |
| Brand | ATSEVA |
|---|---|
| Origin | Russia |
| Model | TiC |
| Type | Solid-State CW Tunable Laser Oscillator |
| Tuning Range | 700–1000 nm (standard), extendable to 690–1060 nm |
| Output Power | >1.8 W @ 800 nm (free-space), up to 1.2 W (fiber-coupled, 4 µm core) |
| Linewidth | <45 GHz (default), <20 GHz (with one intra-cavity etalon), <2 GHz (with two intra-cavity etalons) |
| Pump Requirement | CW DPSS or Ar⁺-Ion laser at 480–550 nm (typically 532 nm), 2–10 W |
| Beam Quality | TEM₀₀, M² < 1.2 |
| Polarization | Linear, horizontal, PER > 100:1 |
| Power Stability | <0.2 % rms (12 h, after 30-min warm-up, with closed-loop chiller & certified pump laser) |
| Control Interface | USB-connected stepper motor actuation, Windows-based software suite (Basic/AU/Automatic packages) |
| Optional Features | Integrated spectrometer, power meter, active power stabilization, fiber coupling (SMF, FC connector), BRF control |