C&W
Filter
Showing all 3 results
| Brand | C&W |
|---|---|
| Origin | Netherlands |
| Model | CW Series Cyclic Corrosion Test Chamber |
| External Dimensions (L×W×H) | 1000×600×645 mm to 2750×1220×1630 mm |
| Internal Dimensions (L×W×H¹×H²) | 600×450×375×565 mm to 2000×1000×850×1175 mm |
| Power Supply | Single-phase or three-phase 380 V, 50/60 Hz |
| Compressed Air Requirement | Oil-free, dry, clean air |
| Humidity Range | 15% to 98% RH (controlled) |
| Temperature Control | Integrated refrigeration compressor system (continuous or standby operation) |
| Optional Features | Deionizer & sediment filter (recommended for water with >50 mg/L TDS), low-water-level alarm, external salt fog collection vessel, condensate-controlled fog generation, variable ventilation, ergonomic control panel, GRP composite enclosure with chemical/thermal resistance, pneumatic lid support, modular sample mounting fixtures |
| Brand | C&W |
|---|---|
| Origin | Netherlands |
| Model | CW1001–CW1020 Series |
| Internal Volume | 100 L to 2000 L |
| External Dimensions (L×W×H) | 1000×600×645 mm to 2750×1220×1630 mm |
| Internal Dimensions (L×W×H¹×H²) | 600×450×375×565 mm to 2000×1000×850×1175 mm |
| Power Supply | 13–32 A, Single- or Three-Phase 230/380 V, 50/60 Hz |
| Compressed Air Requirement | Oil-free, dry, filtered |
| Pressure | 2–4 bar (30–60 psi) for spray generation |
| Temperature Range | 30–80 °C (chamber), ±1 °C accuracy |
| Saturated Air Tower | 65 °C ±1 °C, NiCr heating element with overheat protection and auto-refill humidifier |
| Salt Solution Reservoir | 114 L mobile external tank, integrated filtration, ~14 days continuous operation |
| Control System | Microprocessor-based, 7 programmable test methods, cycle timer with remaining count, spray/dry/purge sequencing |
| Optional | Low-level alarm, ergonomic control panel, GRP corrosion-resistant chamber body, insulated apex lid with gas spring support |
| Compliance | Designed to meet ASTM B117, ISO 9227, JIS Z2241, DIN 50021 requirements |
| Brand | C&W |
|---|---|
| Origin | Netherlands |
| Model | CW1001 |
| Spray Method | Direct Air-Atomized Nozzle |
| Fog Output Rate | 1–2 mL/h |
| Nozzle Operating Pressure | 8.44 kg/cm² (≈120 psi) |
| Fog Collection Rate | 1–2 mL per 80 cm² per hour |
| Temperature Range | Ambient to 55 °C |
| Compliance | ASTM B117, ISO 9227, EN ISO 7253, DIN 50021, JIS Z 2371, SAE J2334, Ford CETP, GMW 14872, VW PV1210, BMW GS 90031, Renault D17 2025, etc. |