DELEITE
Filter
Showing 1–30 of 45 results
| Brand | DELEITE |
|---|---|
| Origin | Beijing, China |
| Instrument Type | Single-beam Visible Spectrophotometer |
| Model Series | 721 / 722 / 722N / 722S |
| Wavelength Range | 320–1100 nm |
| Spectral Bandwidth | 2 nm (722S), 4–6 nm (721/722/722N) |
| Wavelength Accuracy | ±2 nm (721/722/722N), ±1 nm (722S/723 series) |
| Wavelength Repeatability | ≤0.2–1 nm |
| Stray Light | ≤0.05%T @ 360 nm |
| Photometric Accuracy | ±0.3–0.5%T |
| Photometric Repeatability | ±0.2%T |
| Baseline Linearity | ≤0.2%T |
| Drift | ≤0.001–0.004 A/h @ 500 nm |
| Noise | ≤0.1–0.3%T |
| Optical System | Czerny-Turner monochromator with 1200 lines/mm grating |
| Detector | Imported silicon photodiode |
| Light Source | Imported tungsten halogen lamp |
| Display | 128×64 dot-matrix LCD |
| Data Output | RS-232 (optional), parallel port (optional), USB (via YOKE 3.0 software interface) |
| Sample Compartment | Accommodates cuvettes from 5 mm to 100 mm pathlength |
| Compliance | Designed for routine QC/QA in accordance with ISO 6425, ASTM E275, and USP <857> spectrophotometric validation principles |
| Brand | DELEITE |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Model | AAS-9000G |
| Quotation | Upon Request |
| Optical Design | Single-beam |
| Detector | Photodiode Array (PDA) |
| Wavelength Range | 185–190 nm |
| Wavelength Automation | Motorized Auto-Scanning & Peak Search |
| Spectral Bandwidth | 0.1, 0.2, 0.4, 0.7, 1.4, 2.0 nm (6-step motorized selection) |
| Brand | DELEITE |
|---|---|
| Origin | Shanghai, China |
| Model | AKN-3240 |
| Automation Level | Fully Automated |
| Nitrogen Determination Range | 0.01–240 mg N per sample |
| Distillation Time | 0–9 min/sample |
| Titration Precision | RSD < 0.0012 µL/step |
| Minimum Titration Volume | 1–20 µL/step (auto-adjusted based on standard acid concentration) |
| Recovery Rate | >99.5% |
| Power Adjustment Range | 0–1500 W |
| Linearity | RSD <1.0% across 1× to 4× sample mass (same matrix) |
| Repeatability (RSD) | <0.5% |
| Digestion Tube Compatibility | Ø42 × 300 mm (supports both 300 mL and 650 mL tubes) |
| Data Storage Capacity | ≥200,000 sample records (≥7 years at typical lab throughput) |
| Compliance | Supports audit-trail-enabled operation per GLP/GMP requirements |
| Brand | DELEITE |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Manufacture | China |
| Model | ALTR-5000 |
| Voltage | 220 V AC |
| Power Consumption | 1200 W |
| Net Weight | 145 kg |
| External Dimensions | 118 × 66 × 110 cm |
| Test Speed | 360 ± 40 mm/min |
| Temperature Range | –40 °C (adjustable in 1 °C increments) |
| Specimen Capacity | 10 or 20 specimens per cycle |
| Specimen Size | 150 × 25 mm |
| Timing Range | 0–99 min 59 sec (programmable) |
| Mandrel Diameters | Φ20 mm, Φ30 mm, Φ50 mm |
| Cooling System | Dual-compressor refrigeration unit |
| Control Interface | 7-inch capacitive touchscreen with embedded PLC logic |
| Compliance | GB/T 328.14–2007 (Method 14: Low-Temperature Flexibility of Bituminous Waterproofing Membranes) |
| Brand | DELEITE |
|---|---|
| Origin | Shanghai, China |
| Model | APT-1000 |
| Display | 10-inch capacitive color touchscreen |
| Titration Modes | Dynamic, Endpoint, Equivalence-Point, Manual |
| Measurement Range | mV: −2000.0 to +2000.0 mV |
| pH | −2.000 to +20.000 pH |
| Temperature | −5 to 120 °C |
| Resolution | mV: 0.1 mV |
| pH | 0.001 pH |
| Temp | 0.1 °C |
| Accuracy | mV: ±0.1 mV or ±0.03% FS |
| pH | ±0.01 pH |
| Temp | ±0.1 °C |
| Repeatability (Titration) | ≤0.2% RSD |
| Electronic Unit Repeatability | ≤0.2 mV |
| Drift Stability | ±0.3 mV / 3 h |
| Burette Capacity | 10 mL |
| Burette Resolution | 1/96,000 steps |
| Material Compatibility | Acid-/alkali-resistant fluidic path (PP, PTFE, FEP, ceramic valves) |
| Compliance | Designed for GLP/GMP-aligned workflows |
| Brand | DELEITE |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | APT-2000 |
| Pricing | Available Upon Request |
| Measurement Range | mV: −2000.0 to +2000.0 mV |
| pH | −20.000 to +20.000 pH |
| Temperature | −5 to 120 °C |
| Resolution | 0.1 mV, 0.001 pH, 0.1 °C |
| Accuracy | ±0.1 mV (±0.03% of reading), ±0.003 pH, ±0.1 °C |
| Burette Options | 1 mL / 5 mL / 10 mL / 25 mL (standard: 10 mL) |
| Burette Resolution | 1/48000 steps |
| Refill Time (100%) | 16 s |
| Stirring Method | Magnetic stirring |
| Electrode Interfaces | mV/pH input, reference electrode input, temperature probe input |
| Connectivity | USB, power interface |
| Burette Material | PTFE |
| Drive Mechanism | Micro-stepping motor |
| Brand | DELEITE |
|---|---|
| Origin | Shanghai, China |
| Model | APT300 |
| Instrument Type | General-Purpose Potentiometric Titrator |
| Measurement Range | 0 to ±1999 mV, 0 to 14.00 pH |
| Accuracy | 0.1% F.S. (mV), ±0.01 pH |
| Control Precision | ±0.03 pH, ±3 mV |
| Input Impedance | >10¹² Ω |
| Operating Temperature | 5–40 °C |
| Relative Humidity | <85% RH |
| Power Supply | AC 220 V ±10%, 50 Hz |
| Power Consumption | 20 W |
| Weight | 6 kg |
| Brand | DELEITE |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | DarkS-300B |
| Optical Design | Single-beam |
| Detector Type | Photocell |
| Wavelengths | 254 nm and 365 nm |
| Wavelength Accuracy | ±1 nm |
| Wavelength Repeatability | ≤±1 nm |
| Stray Light | ≤0.1% |
| Power Supply | AC 220 V ±10%, 50 Hz |
| Dimensions (L×W×H) | 300 × 300 × 270 mm |
| Illuminated Area | 250 × 250 mm |
| Filter Size | 150 × 50 mm |
| Weight | 3 kg |
| Brand | DELEITE |
|---|---|
| Origin | Shanghai, China |
| Model | DLG-160AT |
| Instrument Type | Benchtop Centrifuge |
| Speed Range | 10,000–30,000 rpm (Max. 16,000 rpm) |
| Max. RCF | 23,669 × g |
| Max. Capacity | 6 × 50 mL |
| Dimensions (L×W×H) | 330 mm × 420 mm × 280 mm |
| Noise Level | <65 dB(A) |
| Speed Accuracy | ±30 rpm |
| Timer Range | 1 s – 99 min |
| Power Supply | AC 220 V, 50 Hz, 5 A |
| Power Consumption | 750 W |
| Rotor Type | Fixed-angle |
| Safety Certifications | FDA Registered, GMP-compliant sealing (food-grade silicone rubber seal), CE-marked electrical safety |
| Brand | DELEITE |
|---|---|
| Origin | Shanghai, China |
| Model | DLG-R165AT |
| Instrument Type | Benchtop Centrifuge |
| Speed Range | High-Speed (10,000–30,000 rpm) |
| Cooling Function | Refrigerated |
| Rotor Type | Fixed-Angle |
| Maximum Capacity | 36 × 1.5 mL tubes |
| Maximum Speed | 16,500 rpm |
| Maximum RCF | 21,532 × g |
| Dimensions (L×W×H) | 280 mm × 540 mm × 300 mm |
| Speed Accuracy | ±30 rpm |
| Time Range | 1 min – 9 h 59 min (or 1–99 min in short-mode) |
| Noise Level | <65 dB(A) |
| Power Supply | AC 220 V, 50 Hz, 10 A |
| Sealing Material | Food-Grade Silicone Rubber Gasket |
| Safety Features | Electronic Door Lock, Lid Interlock, Overspeed Protection, Overtemperature Protection, Automatic Fault Alarm |
| Brand | DELEITE |
|---|---|
| Origin | Shanghai, China |
| Model | DLT-2400 |
| Instrument Type | Ultrasonic Cell Disruptor |
| Operating Frequency | 20 kHz ± 0.5 kHz |
| Ultrasonic Power Output | 2400 W (continuously adjustable from 1% to 100%) |
| Sample Volume Capacity | 500–2000 mL |
| Temperature Control Range | 0–99.9 °C |
| Duty Cycle Adjustment | 0.1–99.9% |
| Display | 7-inch TFT capacitive touchscreen |
| Probe Material | TC4 titanium alloy |
| Standard Horn Diameter | Φ25 mm (optional horns: Φ3, 6, 10, 15, 20, 22, 25, 28 mm) |
| Safety Features | Overcurrent, overvoltage, overtemperature, and timer fault protection |
| Cooling | Integrated NTC thermistor-based sample temperature monitoring |
| Configuration | Separated main unit + acoustic isolation chamber with motorized lift stage and LED illumination |
| Optional Upgrades | UV sterilization module |
| Brand | DELEITE |
|---|---|
| Origin | Shanghai, China |
| Model | DLT-6500 |
| Optical System | Dual-beam |
| Detector | Photodiode Array (PDA) |
| Wavelength Range | 190–1100 nm |
| Spectral Bandwidth | 2 nm |
| Wavelength Accuracy | ±0.3 nm |
| Wavelength Repeatability | ±0.1 nm |
| Stray Light | ≤0.05%T |
| Photometric Range | 0–200%T, –0.3–3 A |
| Photometric Accuracy | ±0.5%T, ±0.004 A (0–0.5 A), ±0.008 A (0.5–1 A) |
| Photometric Repeatability | ±0.5%T, ±0.004 A (0–0.5 A), ±0.008 A (0.5–1 A) |
| Baseline Stability | ±0.002 A (500 nm, 3 min) |
| Display | 7-inch TFT-LCD touchscreen (1024 × 768) |
| Interfaces | USB 2.0, Bluetooth 4.2, Wi-Fi 802.11 b/g/n |
| Software Compatibility | PC-based spectral analysis suite (optional), cloud-enabled IoT firmware (standard) |
| Brand | Deleite |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | DLT-EPR-2L |
| Capacity | 2 L |
| Vessel Material | Borosilicate Glass 3.3 (Duran®/Pyrex® grade) |
| Operating Pressure Range | Ambient to –0.095 MPa (absolute) |
| Temperature Range | –60 °C to +200 °C |
| Stirring Speed | 0–800 rpm (digital speed control, explosion-proof motor) |
| Motor Power | 120 W |
| Sealing System | Mechanical seal with ceramic–PTFE hybrid components |
| Stirrer Type | Single-layer anchor impeller (PTFE-coated stainless steel shaft, Ø8 mm) |
| Lid Configuration | 5-port standard ground-glass interface (1× 19# for temperature probe |
| Cooling/Heating Jacket | Dual-layer borosilicate glass with Φ12 mm jacket inlet/outlet (PTFE tubing compatible) |
| Base Frame | 304 stainless steel |
| Bottom Discharge Valve | Glass–PTFE composite plug valve |
| Electrical Supply | 220 V AC, 50 Hz |
| Compliance | Designed for GLP-compliant laboratory synthesis under vacuum or atmospheric conditions |
| Brand | DELEITE |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | DLT-HS165 |
| Instrument Type | Benchtop Centrifuge |
| Speed Range | 10,000–30,000 rpm (Max. 16,500 rpm) |
| RCF Max | 23,669 × g |
| Max Capacity | 4 × 100 mL |
| Speed Accuracy | ±30 rpm |
| Timer Range | 1 min – 99 min 59 s |
| Display | LCD + Touch Panel Interface |
| Noise Level | <65 dB(A) |
| Power Supply | AC 220 V, 50 Hz, 10 A |
| Dimensions (L×W×H) | 330 mm × 420 mm × 280 mm |
| Net Weight | 20 kg |
| Brand | DELEITE |
|---|---|
| Origin | Shanghai, China |
| Model | DLT-LS55 |
| Instrument Type | Benchtop Centrifuge |
| Speed Range | 0–5500 rpm |
| Max RCF | 5310 × g |
| Max Capacity | 4 × 500 mL |
| Dimensions (L×W×H) | 460 mm × 540 mm × 340 mm |
| Noise Level | <65 dB(A) |
| Power Supply | AC 220 V, 50 Hz, 20 A |
| Net Weight | 31 kg |
| Speed Accuracy | ±30 rpm |
| Time Setting Range | 1 min – 99 h 59 min |
| Drive System | Microprocessor-Controlled AC Frequency Conversion Motor |
| Safety Features | Electronic Door Lock, Lid Interlock, Overspeed Protection, Automatic Fault Alarm |
| Acceleration/Deceleration Profiles | 10 Programmable Ramp Curves |
| Brand | DELEITE |
|---|---|
| Origin | Shanghai, China |
| Model | DLT-RD50 |
| Instrument Type | Benchtop Refrigerated Centrifuge |
| Max Capacity | 15 mL × 32 |
| Max RCF | 4390 × g |
| Dimensions (L×W×H) | 460 mm × 710 mm × 420 mm |
| Weight | 80 kg |
| Max Speed | 5000 rpm |
| Speed Accuracy | ±30 rpm |
| Temp Range | –5 °C to +35 °C |
| Temp Accuracy | ±1 °C |
| Noise Level | <65 dB(A) |
| Power Supply | AC 220 V, 50 Hz, 15 A |
| Refrigerant | R22a |
| Brand | DELEITE |
|---|---|
| Origin | Shanghai, China |
| Model | DMS-3000 |
| Instrument Type | Online Continuous Monitoring System |
| Measurement Principle | Optical Light Scattering (Nephelometry) |
| Measured Parameters | PM2.5, PM10, TSP, Sound Pressure Level (dB(A)), Ambient Temperature (°C), Relative Humidity (%RH), Wind Speed (m/s), Wind Direction (°), Atmospheric Pressure (hPa) |
| Monitoring Method | 24-Hour Uninterrupted Automated Sampling & Data Logging |
| Power Supply | AC 220 V |
| Display | Waterproof LED Dot-Matrix Screen (540 mm × 1020 mm) |
| Relay Outputs | 2 channels (10 A / 250 V AC) for external equipment control (e.g., fog cannons) |
| Structural Mounting | Dual-Pole Vertical Mast (Lower Pole: 1500 mm |
| Upper Pole | 1325 mm) |
| Total Screen Assembly Dimensions | 2825 mm × 1020 mm |
| Brand | DELEITE |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | DMS-4KEA |
| Price | USD 2,150 (FOB Shanghai) |
| Heating Method | Halogen Lamp |
| Weighing Range | 0–110 g |
| Weighing Accuracy | ±0.001 g |
| Moisture Determination Range | 0.001–100% |
| Temperature Control Range | 40–200 °C |
| Typical Measurement Time | ≤8 min |
| Display | 7-inch capacitive touchscreen |
| Language Support | English & Chinese |
| Built-in Functions | Auto-tare, one-touch preheat, temperature calibration, label printing, silent cooling fan, dual-drive automatic door opening |
| Optional Connectivity | Bluetooth 5.0 & Wi-Fi 802.11 b/g/n |
| User Management | Administrator & operator accounts with password protection |
| Internal Calibration | Scheduled interval setting with audit trail |
| Compliance | ASTM D4052, ISO 1183, USP <921>, GB/T 29246–2012 |
| Brand | DELEITE |
|---|---|
| Origin | Shanghai, China |
| Model | DPH-10PT |
| pH Range | -2.00 to 20.00 pH |
| Resolution | 0.01/0.1 pH |
| Accuracy | ±0.02 pH |
| Temperature Compensation | Manual/Automatic (0–100 °C) |
| Dimensions | 215 × 170 × 40 mm |
| Weight | 0.6 kg |
| mV Range | −1999 to +1999 mV |
| mV Resolution | 1 mV |
| mV Accuracy | ±0.1% FS |
| Temp. Accuracy | ±0.5 °C |
| Input Impedance | ≥1 × 10¹² Ω |
| Input Current | ≤1 × 10⁻¹² A |
| Stability | ±0.01 pH / 3 h |
| Data Storage | 300 sets |
| Interface | USB 2.0, micro-USB, optional Bluetooth module |
| IP Rating | IP54 |
| GLP Compliance | Yes |
| Brand | Deleite |
|---|---|
| Origin | Shanghai, China |
| Model | DR-506 |
| Measurement Principle | Microbial Electrode Method |
| Standard Compliance | HJ/T 86–2002 |
| Measuring Range | 2–50 mg/L (up to 4000 mg/L with dilution) |
| Repeatability | ≤10% RSD |
| Accuracy | ±5% of reading |
| Resolution | 0.1 mg/L |
| Sample Throughput Time | 5–8 min per sample |
| Sample Volume Required | 50 mL per assay |
| Flow Rate | Constant-flow continuous injection (5 mL/min buffer consumption) |
| Operating Temperature | 5–40 °C |
| Relative Humidity | ≤90% RH |
| Power Supply | AC 220 V, 50 Hz |
| Power Consumption | 100 W |
| Dimensions (W×D×H) | 560 × 360 × 210 mm |
| Net Weight | 16 kg (shipping weight ~20 kg) |
| Sample Handling | No pretreatment required |
| Microbial Sensor | Non-pathogenic, immobilized nitrifying bacteria strain |
| Data Output | Integrated thermal printer |
| Brand | Deleite |
|---|---|
| Origin | Shanghai, China |
| Model | DR-AR200 |
| Type | Benchtop Abbe Refractometer |
| Refractive Index Range (nD) | 1.3000–1.7000 |
| Brix Range | 0–95% |
| Accuracy (nD) | ±0.0003 (estimated reading) |
| Magnification | Telescope 2×, Scale Reading 22× |
| Dimensions | 200 × 100 × 240 mm |
| Weight | 2.6 kg |
| Brand | DELEITE |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Region of Manufacture | Domestic (China) |
| Model | DWY-TS4228T-V3 |
| Price | USD 1,150 (FOB Shanghai) |
| Thermal Detector | Uncooled Vanadium Oxide (VOx) |
| Thermal Spectral Band | 8–14 µm |
| Thermal Resolution | 256 × 192 |
| Visible Sensor | 4 MP CMOS |
| Optical Zoom | 32× (4.8–153 mm) |
| IR Illumination Range | 100 m |
| Digital Image Enhancement | Defogging Algorithm |
| Temperature Range | −20 °C to +550 °C |
| Temperature Accuracy | ±2 °C or ±2% of reading (whichever is greater) |
| Fire Detection Distance | up to 250 m |
| Smoke Detection Distance | up to 1500 m |
| Pan | Continuous 360° |
| Pan Speed | 0.1–200°/s |
| Tilt | −5° to +90° |
| Presets | 300 |
| Scan Patterns | 8 |
| Positioning Accuracy | 0.1° |
| Housing Material | High-Strength Aluminum Alloy |
| Ingress Protection | IP66 |
| Surge Protection | 6 kV |
| Operating Temperature | −40 °C to +70 °C |
| Power Input | AC24 V / DC36 V / DC48 V / HI-POE |
| Onboard Storage | 256 GB microSD |
| Data Resilience | Offline Recording & Resume-on-Connect |
| Protocol Support | ONVIF Profile S/G, RTSP, HTTP, PSIA, GB/T 28181 |
| Third-Party Integration | Compatible with VMS, SCADA, and IoT platforms |
| Brand | DELEITE |
|---|---|
| Origin | Shanghai, China |
| Model | FB-12 / FB-24 |
| Automation Level | Manual |
| Channel Count | 12 or 24 parallel ports |
| Extraction Format | Cartridge-based (SPE column) |
| Flow Control | Individual manual valve per channel |
| Solvent Compatibility | Multi-solvent (polar to non-polar, including methanol, acetonitrile, ethyl acetate, hexane, dichloromethane) |
| Sample Capacity | 12 samples (FB-12) or 24 samples (FB-24) simultaneously |
| Sample Loading Volume | 1–50 mL (dependent on SPE cartridge specifications) |
| Wetted Materials | Borosilicate glass (vacuum chamber, solvent reservoir, collection tray), PTFE (valves, sealing gaskets), chemically resistant polypropylene (support frame and adjustable tube rack) |
| Vacuum Source | External diaphragm vacuum pump (optional, not included) |
| Brand | Deleite |
|---|---|
| Origin | Shanghai, China |
| Model | FID20-450 |
| Capacity | 20 positions |
| Temperature Range | Ambient to 450 °C |
| Temperature Accuracy | ±1 °C |
| Heating Rate | 10–30 min (ambient to 400 °C) |
| Heating Method | Carbon Fiber Heater with Vacuum-Sealed Quartz Tube Radiative Transfer |
| Safety Protections | Overcurrent, Leakage Current, Overtemperature, and Sensor Failure Protection |
| Control Interface | LCD Touchscreen with Multi-Stage Programmable Ramp/Soak Profiles |
| Insulation | Dual-Layer (Ceramic Fiber + Air Gap) |
| Power Supply | AC 220 V ±10%, 2000 W Max |
| Electrical Requirement | Standard 10 A Three-Pin Socket |
| Exhaust System | Stainless Steel Fume Hood with Dedicated SO₂ Extraction Port |
| Brand | DELEITE |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | Geliant-D503 |
| Instrument Type | Standard Gel Imaging System |
| CCD Resolution | 2592 × 1944 (5.03 MP) |
| Bit Depth | 16-bit (65,536 gray levels) |
| Dynamic Range | 65,536 gray levels |
| CCD Sensor Size | 13.48 mm × 10.11 mm |
| Pixel Size | 5.2 µm × 5.2 µm |
| Detection Sensitivity | ≤ 0.02 ng double-stranded DNA (ethidium bromide staining) |
| Signal-to-Noise Ratio | 69.8 dB |
| Lens | Imported 6× motorized zoom lens, f/1.2, focal length 8–48 mm |
| Transmission UV Source | Standard 302 nm (high-efficiency ballast, η > 80%, rated lamp life ≥ 40,000 on/off cycles) |
| Transmission White Light | Adjustable-intensity LED uniform illuminator |
| Transmission Blue Light | Optional 470 nm |
| Reflected UV | Optional 254 nm / 365 nm |
| Reflected White Light | Dual-side high-brightness cold LED |
| UV Transilluminator Area | 210 mm × 260 mm |
| Visible Light Transilluminator Area | 210 mm × 260 mm |
| Integrated Gel Cutting Hood | Standard |
| Control Architecture | Fully programmable microprocessor-controlled module (lens zoom/focus/aperture, transmission/reflection illumination, cutting light) |
| Auto UV Shut-off | Configurable timer (1–60 min inactivity) |
| Enclosure | Light-tight dark chamber with interlocked UV safety cutoff |
| Software | DELEITE GelCapture & GelAnalyzer Suite (free lifetime installation, updates, remote training, and on-site support per contractual agreement) |
| Brand | Deleite |
|---|---|
| Origin | Shanghai, China |
| Model | HE100-1 |
| Heating Source | Halogen Lamp |
| Weighing Range | 0–100 g |
| Readability | 1 mg |
| Repeatability | ±0.30% (with 3 g sample) |
| Temperature Range | 40–180 °C |
| Heating Time | 1–99 min (1 min increments) |
| Sample Pan Diameter | 100 mm |
| Communication Interface | RS232 |
| Displayed Parameters | % Moisture, % Solids, Time, Temperature, Weight, Date |
| Brand | DELEITE |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | HM400S |
| Instrument Type | Paddle-Beater (Stomacher-Style) |
| Dimensions (W×D×H) | 420 × 230 × 330 mm |
| Processing Volume Range | 10–400 mL |
| Control System | Microprocessor-based with 8-step programmable sequence |
| Display | 4.3-inch capacitive touchscreen |
| Operation Interface | Touchscreen-only |
| Beating Time Range | 0.1–99 min 59 sec or continuous mode |
| Beater Plate Material | Stainless steel (304) with proprietary elastomeric compression sleeve |
| Beating Frequency | 3–12 cycles/sec |
| Effective Sample Volume Capacity | 3–400 mL |
| Sterile Bag Size Compatibility | 17 × 30 cm |
| Chamber Construction | Stainless steel housing with corrosion-resistant epoxy powder coating |
| Adjustable Beater Gap | 0–50 mm |
| Soft-Start Activation | Yes |
| Pause Function | Yes |
| Power Supply / Rated Power | 220 V AC, 50/60 Hz / 200 W |
| Anti-Pinch Safety Mechanism | Automatic motor cutoff upon door obstruction detection |
| Viewing Window | Removable tempered glass safety door |
| Audible Operation Feedback | Voice prompts for status and error conditions |
| Net Weight | 18 kg |
| Outer Carton Dimensions (L×W×H) | 540 × 310 × 410 mm |
| Brand | DELEITE |
|---|---|
| Origin | Shanghai, China |
| Model | IM-15A |
| Ice Type | Cylindrical flake ice (Ø20 mm × 30 mm) |
| Ice Production Capacity | 15 kg/24h |
| Ice Storage Capacity | 2 kg |
| Water Consumption | ≤0.8 L/kg ice |
| Refrigeration System | R134a refrigerant with imported non-CFC compressor |
| Cooling Method | Air-cooled |
| Power Input | 180 W |
| Dimensions (L×W×H) | 360 × 398 × 420 mm |
| Net Weight | 20 kg |
| Compliance | CE certified |
| Brand | DELEITE |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | IM-20 |
| Pricing | Available Upon Request |
| Ice Type | Flake Ice |
| Ice Production Method | Dual-Screw Extrusion |
| Daily Ice Output | 20 kg |
| Ice Storage Capacity | 5 kg |
| Water Consumption | ≤0.8 L/kg ice |
| Cooling System | R134a Refrigerant (CFC-Free) |
| Brand | DELEITE |
|---|---|
| Model | IM-22 |
| Ice Type | Square Cube Ice (22 × 22 mm) |
| Ice Production Capacity | 22 kg/24 h |
| Storage Capacity | 2 kg |
| Water Consumption | ≤0.8 L/kg ice |
| Refrigerant | R134a (non-ozone-depleting) |
| Compressor | Imported high-efficiency hermetic compressor |
| Cabinet Material | Stainless steel (AISI 304) |
| Power Input | 200 W |
| Dimensions (L×W×H) | 360 × 440 × 450 mm |
| Net Weight | 22 kg |
| Cooling Method | Air-cooled condensation |
| Compliance | CE-marked per EN 60335-1 & EN 60335-2-74 |